summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-05block: remove blk_drop_partitionsChristoph Hellwig
There is only a single caller left, so fold the loop into that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: delete partitions later in del_gendiskChristoph Hellwig
Delay dropping the block_devices for partitions in del_gendisk until after the call to blk_mark_disk_dead, so that we can implementat notification of removed devices in blk_mark_disk_dead. This requires splitting a lower-level drop_partition helper out of delete_partition and using that from del_gendisk, while having a common loop for the whole device and partitions that calls remove_inode_hash, fsync_bdev and __invalidate_device before the call to blk_mark_disk_dead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: unhash the inode earlier in delete_partitionChristoph Hellwig
Move the call to remove_inode_hash to the beginning of delete_partition, as we want to prevent opening a block_device that is about to be removed ASAP. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: avoid repeated work in blk_mark_disk_deadChristoph Hellwig
Check if GD_DEAD is already set in blk_mark_disk_dead, and don't duplicate the work already done. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: consolidate the shutdown logic in blk_mark_disk_dead and del_gendiskChristoph Hellwig
blk_mark_disk_dead does very similar work a a section of del_gendisk: - set the GD_DEAD flag - set the capacity to zero - start a queue drain but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by the disk, sets the capacity to zero before starting the drain, and both with sending a uevent and kernel message for this fake capacity change. Move the exact logic from the more heavily used del_gendisk into blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: turn bdev_lock into a mutexChristoph Hellwig
There is no reason for this lock to spin, and being able to sleep under it will come in handy soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: refactor bd_may_claimChristoph Hellwig
The long if/else chain obsfucates the actual logic. Tidy it up to be more structured. Also drop the whole argument, as it can be trivially derived from bdev using bdev_whole, and having the bdev_whole in the function makes it easier to follow. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05block: factor out a bd_end_claim helper from blkdev_putChristoph Hellwig
Move all the logic to release an exclusive claim into a helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05drbd: stop defining __KERNEL_SYSCALLS__Christoph Hellwig
__KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop defining it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-05kselftest/arm64: add MOPS to hwcap testKristina Martsenko
Add the MOPS hwcap to the hwcap kselftest and check that a SIGILL is not generated when the feature is detected. A SIGILL is reliable when the feature is not detected as SCTLR_EL1.MSCEn won't have been set. Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230509142235.3284028-12-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: allow disabling MOPS from the kernel command lineKristina Martsenko
Make it possible to disable the MOPS extension at runtime using the kernel command line. This can be useful for testing or working around hardware issues. For example it could be used to test new memory copy routines that do not use MOPS instructions (e.g. from Arm Optimized Routines). Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-11-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: detect and enable FEAT_MOPSKristina Martsenko
The Arm v8.8/9.3 FEAT_MOPS feature provides new instructions that perform a memory copy or set. Wire up the cpufeature code to detect the presence of FEAT_MOPS and enable it. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-10-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: handle single stepping after MOPS exceptionKristina Martsenko
When a MOPS main or epilogue instruction is being executed, the task may get scheduled on a different CPU and restart execution from the prologue instruction. If the main or epilogue instruction is being single stepped then it makes sense to finish the step and take the step exception before starting to execute the next (prologue) instruction. So fast-forward the single step state machine when taking a MOPS exception. This means that if a main or epilogue instruction is single stepped with ptrace, the debugger will sometimes observe the PC moving back to the prologue instruction. (As already mentioned, this should be rare as it only happens when the task is scheduled to another CPU during the step.) This also ensures that perf breakpoints count prologue instructions consistently (i.e. every time they are executed), rather than skipping them when there also happens to be a breakpoint on a main or epilogue instruction. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-9-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: handle MOPS exceptionsKristina Martsenko
The memory copy/set instructions added as part of FEAT_MOPS can take an exception (e.g. page fault) part-way through their execution and resume execution afterwards. If however the task is re-scheduled and execution resumes on a different CPU, then the CPU may take a new type of exception to indicate this. This is because the architecture allows two options (Option A and Option B) to implement the instructions and a heterogeneous system can have different implementations between CPUs. In this case the OS has to reset the registers and restart execution from the prologue instruction. The algorithm for doing this is provided as part of the Arm ARM. Add an exception handler for the new exception and wire it up for userspace tasks. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-8-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05KVM: arm64: hide MOPS from guestsKristina Martsenko
As FEAT_MOPS is not supported in guests yet, hide it from the ID registers for guests. The MOPS instructions are UNDEFINED in guests as HCRX_EL2.MSCEn is not set in HCRX_GUEST_FLAGS, and will take an exception to EL1 if executed. Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20230509142235.3284028-7-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: don't disable host MOPS instructions from EL2Kristina Martsenko
To allow nVHE host EL0 and EL1 to use FEAT_MOPS instructions, configure EL2 to not cause these instructions to be treated as UNDEFINED. A VHE host is unaffected by this control. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-6-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: mops: document boot requirements for MOPSKristina Martsenko
FEAT_MOPS introduces new instructions, we require that these instructions not execute as UNDEFINED when we identify that the feature is supported. Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-5-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05KVM: arm64: switch HCRX_EL2 between host and guestKristina Martsenko
Switch the HCRX_EL2 register between host and guest configurations, in order to enable different features in the host and guest. Now that there are separate guest flags, we can also remove SMPME from the host flags, as SMPME is used for virtualizing SME priorities and has no use in the host. Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20230509142235.3284028-4-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05arm64: cpufeature: detect FEAT_HCXKristina Martsenko
Detect if the system has the new HCRX_EL2 register added in ARMv8.7/9.2, so that subsequent patches can check for its presence. KVM currently relies on the register being present on all CPUs (or none), so the kernel will panic if that is not the case. Fortunately no such systems currently exist, but this can be revisited if they appear. Note that the kernel will not panic if CONFIG_KVM is disabled. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Link: https://lore.kernel.org/r/20230509142235.3284028-3-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05KVM: arm64: initialize HCRX_EL2Kristina Martsenko
ARMv8.7/9.2 adds a new hypervisor configuration register HCRX_EL2. Initialize the register to a safe value (all fields 0), to be robust against firmware that has not initialized it. This is also needed to ensure that the register is reinitialized after a kexec by a future kernel. In addition, move SMPME setup over to the new flags, as it would otherwise get overridden. It is safe to set the bit even if SME is not (uniformly) supported, as it will write to a RES0 bit (having no effect), and SME will be disabled by the cpufeature framework. (Similar to how e.g. the API bit is handled in HCR_HOST_NVHE_FLAGS.) Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20230509142235.3284028-2-kristina.martsenko@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-05ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41Stefan Binding
Add support for Asus ROG 2024 models using CS35L41 SPI with Internal Boost. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230605153308.448550-1-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-05ARM: dts: Fix erroneous ADS touchscreen polaritiesLinus Walleij
Several device tree files get the polarity of the pendown-gpios wrong: this signal is active low. Fix up all incorrect flags, so that operating systems can rely on the flag being correctly set. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'at91-fixes-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.4 It contains: - fix imbalanced reference counter for ethernet devices; without it system hangs after consecutive suspend/resume cycles; - fix debounce delay property for shutdown controller; the initial DT property is not what the driver expects. * tag 'at91-fixes-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc ARM: at91: pm: fix imbalanced reference counter for ethernet devices Link: https://lore.kernel.org/r/20230530105930.11621-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-arm64-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DeviceTree fixes for 6.4 Register scheme for SM8550 LLCC is corrected to avoid using the wrong register offsets. SDRAM frequency for misidentified SC7180-lite boards is handled. The datatype for Soundwire interval on SM8550 is corrected. The resource controller on SC8280XP is added to the CPU cluster power-domain to get notified to send cached sleep and wake votes before going entering the lower power states. SA8155P power-domains that differ from what's inherited from the SM8150 DeviceTree are adjusted to make the platform boot again. Remoteproc firmware paths are corrected for Sony Xperia 10 IV. Cache properties are adjusted across a range of platforms, to meet changes in the binding. Panel compatibles are corrected for Xiaomi Mi Pad 5 Pro, to match binding. Invalid dai-cells are dropped from SC7280 devices, to match binding. The incorrect removal of "input-enable" from the LPASS pinctrl node of SC8280XP was reverted, to get dmic pins in the correct state again. The incorrect input-enable property is dropped from a msm8974, mdm9615 and apq8026 to resolve a range of DT validation warnings, incorrectly picked up through the ARM64 tree. * tag 'qcom-arm64-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm8550: Use the correct LLCC register scheme arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards arm64: dts: qcom: sm8550: use uint16 for Soundwire interval arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths arm64: dts: qcom: add missing cache properties arm64: dts: qcom: use decimal for cache level arm64: dts: qcom: fix indentation ARM: dts: qcom: msm8974: remove superfluous "input-enable" ARM: dts: qcom: mdm9615: remove superfluous "input-enable" ARM: dts: qcom: apq8026: remove superfluous "input-enable" arm64: dts: qcom: sm8250-xiaomi-elish-csot: fix panel compatible arm64: dts: qcom: sm8250-xiaomi-elish-boe: fix panel compatible arm64: dts: qcom: sc7280-qcard: drop incorrect dai-cells from WCD938x SDW arm64: dts: qcom: sc7280-idp: drop incorrect dai-cells from WCD938x SDW arm64: dts: qcom: sc8280xp: Flush RSC sleep & wake votes arm64: dts: qcom: sc8280xp: Revert "arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"" Link: https://lore.kernel.org/r/20230601142659.2246348-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-driver-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for 6.4 Error paths is corrected across icc-bwmon, rpmh-rsc, ramp_controller and rmtfs. The ice module is renamed qcom_ice, to avoid clashing with existing "ice" driver. SA8155P-specific RPMh power-domains are introduced to avoid the code trying to access resources that exists on SM8150, but not on SA8155P. Lastly, changes to the EDAC driver to fix an issue where the driver performs mmio based on the wrong register map. * tag 'qcom-driver-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: EDAC/qcom: Get rid of hardcoded register offsets EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup() dt-bindings: cache: qcom,llcc: Fix SM8550 description soc: qcom: rpmhpd: Add SA8155P power domains dt-bindings: power: qcom,rpmpd: Add SA8155P soc: qcom: Rename ice to qcom_ice to avoid module name conflict soc: qcom: rmtfs: Fix error code in probe() soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe() soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparision soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe() Link: https://lore.kernel.org/r/20230601141058.2246039-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'qcom-dts-fixes-for-6.4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM32 fix for 6.4 A range of 32-bit Qualcomm platforms are missing cache-unified, which is now required by the binding, this is now corrected. * tag 'qcom-dts-fixes-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add missing cache properties Link: https://lore.kernel.org/r/20230601140347.2245680-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-05Merge tag 'asym-keys-fix-for-linus-v6.4-rc5' of ↵Linus Torvalds
https://github.com/robertosassu/linux Pull asymmetric keys fix from Roberto Sassu: "Here is a small fix to make an unconditional copy of the buffer passed to crypto operations, to take into account the case of the stack not in the linear mapping area. It has been tested and verified to fix the bug" Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: David Howells <dhowells@redhat.com> * tag 'asym-keys-fix-for-linus-v6.4-rc5' of https://github.com/robertosassu/linux: KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()
2023-06-05ACPI: scan: Reduce overhead related to devices with dependenciesRafael J. Wysocki
Notice that all of the objects for which the acpi_scan_check_dep() return value is greater than 0 are present in acpi_dep_list as consumers (there may be multiple entries for one object, but that is not a problem), so after carrying out the initial ACPI namespace walk in which devices with dependencies are skipped, acpi_bus_scan() can simply walk acpi_dep_list and enumerate all of the unique consumer objects from there and their descendants instead of walking the entire target branch of the ACPI namespace and looking for device objects that have not been enumerated yet in it. Because walking acpi_dep_list is generally less overhead than walking the entire ACPI namespace, use the observation above to reduce the system initialization overhead related to ACPI, which is particularly important on large systems. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-06-05drivers/perf: apple_m1: Force 63bit counters for M2 CPUsMarc Zyngier
Sidharth reports that on M2, the PMU never generates any interrupt when using 'perf record', which is a annoying as you get no sample. I'm temped to say "no sample, no problem", but others may have a different opinion. Upon investigation, it appears that the counters on M2 are significantly different from the ones on M1, as they count on 64 bits instead of 48. Which of course, in the fine M1 tradition, means that we can only use 63 bits, as the top bit is used to signal the interrupt... This results in having to introduce yet another flag to indicate yet another odd counter width. Who knows what the next crazy implementation will do... With this, perf can work out the correct offset, and 'perf record' works as intended. Tested on M2 and M2-Pro CPUs. Cc: Janne Grunau <j@jannau.net> Cc: Hector Martin <marcan@marcan.st> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Fixes: 7d0bfb7c9977 ("drivers/perf: apple_m1: Add Apple M2 support") Reported-by: Sidharth Kshatriya <sid.kshatriya@gmail.com> Tested-by: Sidharth Kshatriya <sid.kshatriya@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230528080205.288446-1-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2023-06-05perf/arm-cmn: Fix DTC resetRobin Murphy
It turns out that my naive DTC reset logic fails to work as intended, since, after checking with the hardware designers, the PMU actually needs to be fully enabled in order to correctly clear any pending overflows. Therefore, invert the sequence to start with turning on both enables so that we can reliably get the DTCs into a known state, then moving to our normal counters-stopped state from there. Since all the DTM counters have already been unpaired during the initial discovery pass, we just need to additionally reset the cycle counters to ensure that no other unexpected overflows occur during this period. Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver") Reported-by: Geoff Blake <blakgeof@amazon.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0ea4559261ea394f827c9aee5168c77a60aaee03.1684946389.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-06-05firmware: cs_dsp: Log correct region name in bin error messagesRichard Fitzgerald
In cs_dsp_load_coeff() region_name should be set in the XM/YM/ZM cases otherwise any errors will log the region as "Unknown". While doing this also change one error message that logged the region type ID to log the region_name instead. This makes it consistent with other messages in the same function. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230605143238.4001982-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-05Merge branch 'mptcp-addr-adv-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Fixes for address advertisement Patches 1 and 2 allow address advertisements to be removed without affecting current connected subflows, and updates associated self tests. Patches 3 and 4 correctly track (and allow removal of) addresses that were implicitly announced as part of subflow creation. Also updates associated self tests. Patch 5 makes subflow and address announcement counters work consistently between the userspace and in-kernel path managers. ==================== Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: update userspace pm infosGeliang Tang
Increase pm subflows counter on both server side and client side when userspace pm creates a new subflow, and decrease the counter when it closes a subflow. Increase add_addr_signaled counter in mptcp_nl_cmd_announce() when the address is announced by userspace PM. This modification is similar to how the in-kernel PM is updating the counter: when additional subflows are created/removed. Fixes: 9ab4807c84a4 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE") Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/329 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05selftests: mptcp: update userspace pm subflow testsGeliang Tang
To align with what is done by the in-kernel PM, update userspace pm subflow selftests, by sending the a remove_addrs command together before the remove_subflows command. This will get a RM_ADDR in chk_rm_nr(). Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Fixes: 5e986ec46874 ("selftests: mptcp: userspace pm subflow tests") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: add address into userspace pm listGeliang Tang
Add the address into userspace_pm_local_addr_list when the subflow is created. Make sure it can be found in mptcp_nl_cmd_remove(). And delete it in the new helper mptcp_userspace_pm_delete_local_addr(). By doing this, the "REMOVE" command also works with subflows that have been created via the "SUB_CREATE" command instead of restricting to the addresses that have been announced via the "ANNOUNCE" command. Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Link: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05selftests: mptcp: update userspace pm addr testsGeliang Tang
This patch is linked to the previous commit ("mptcp: only send RM_ADDR in nl_cmd_remove"). To align with what is done by the in-kernel PM, update userspace pm addr selftests, by sending a remove_subflows command together after the remove_addrs command. Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Fixes: 97040cf9806e ("selftests: mptcp: userspace pm address tests") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05mptcp: only send RM_ADDR in nl_cmd_removeGeliang Tang
The specifications from [1] about the "REMOVE" command say: Announce that an address has been lost to the peer It was then only supposed to send a RM_ADDR and not trying to delete associated subflows. A new helper mptcp_pm_remove_addrs() is then introduced to do just that, compared to mptcp_pm_remove_addrs_and_subflows() also removing subflows. To delete a subflow, the userspace daemon can use the "SUB_DESTROY" command, see mptcp_nl_cmd_sf_destroy(). Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Link: https://github.com/multipath-tcp/mptcp/blob/mptcp_v0.96/include/uapi/linux/mptcp.h [1] Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robustChristophe JAILLET
If an error occurs after calling list_add(), the &l2cache_pmu->clusters list will reference some memory that will be freed when the managed resources will be released. Move the list_add() at the end of the function when everything is in fine. This is harmless because if l2_cache_pmu_probe_cluster() fails, then l2_cache_pmu_probe() will fail as well and 'l2cache_pmu' will be released as well. But it looks cleaner and could silence static checker warning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/6a0f5bdb6b7b2ed4ef194fc49693e902ad5b95ea.1684397879.git.christophe.jaillet@wanadoo.fr Signed-off-by: Will Deacon <will@kernel.org>
2023-06-05perf/arm-cci: Slightly optimize cci_pmu_sync_counters()Christophe JAILLET
When the 'mask' bitmap is cleared, it is better to use its full maximum size instead of only the needed size. This lets the compiler optimize it because the size is now known at compile time. HW_CNTRS_MAX is small (i.e. currently 9), so a call to memset() is saved. Also, as 'mask' is local to the function, the non-atomic __set_bit() can also safely be used here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/88d4e20d595f771396e9d558c1587eb4494057db.1682022422.git.christophe.jaillet@wanadoo.fr Signed-off-by: Will Deacon <will@kernel.org>
2023-06-05NFSD: Ensure that xdr_write_pages updates rq_next_pageChuck Lever
All other NFSv[23] procedures manage to keep page_ptr and rq_next_page in lock step. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05NFSD: Replace encode_cinfo()Chuck Lever
De-duplicate "reserve_space; encode_cinfo". Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05NFSD: Add encoders for NFSv4 clientids and verifiersChuck Lever
Deduplicate some common code. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05SUNRPC: Use __alloc_bulk_pages() in svc_init_buffer()Chuck Lever
Clean up: Use the bulk page allocator when filling a server thread's buffer page array. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05SUNRPC: Resupply rq_pages from node-local memoryChuck Lever
svc_init_buffer() is careful to allocate the initial set of server thread buffer pages from memory on the local NUMA node. svc_alloc_arg() should also be that careful. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05NFSD: trace nfsctl operationsChuck Lever
Add trace log eye-catchers that record the arguments used to configure NFSD. This helps when troubleshooting the NFSD administrative interfaces. These tracepoints can capture NFSD start-up and shutdown times and parameters, changes in lease time and thread count, and a request to end the namespace's NFSv4 grace period, in addition to the set of NFS versions that are enabled. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05NFSD: Clean up nfsctl_transaction_write()Chuck Lever
For easier readability, follow the common convention: if (error) handle_error; continue_normally; No behavior change is expected. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05NFSD: Clean up nfsctl white-space damageChuck Lever
Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05SUNRPC: Trace struct svc_sock lifetime eventsChuck Lever
Capture a timestamp and pointer address during the creation and destruction of struct svc_sock to record its lifetime. This helps to diagnose transport reference counting issues. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05SUNRPC: Improve observability in svc_tcp_accept()Chuck Lever
The -ENOMEM arm could fire repeatedly if the system runs low on memory, so remove it. Don't bother to trace -EAGAIN error events, since those fire after a listener is created (with no work done) and once again after an accept has been handled successfully (again, with no work done). Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-06-05SUNRPC: Remove dprintk() in svc_handle_xprt()Chuck Lever
When enabled, this dprintk() fires for every incoming RPC, which is an enormous amount of log traffic. These days, after the first few hundred log messages, the system journald is just going to mute it, along with all other NFSD debug output. Let's rely on trace points for this high-traffic information instead. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-19 07:02:07 +0000