| Age | Commit message (Collapse) | Author |
|---|
|
The call to mmc_request_done() can schedule, so it must not be called
from irq context. Wake the irq thread if it needs to be called, and let
its existing logic do its work.
Fixes the following kernel bug, which appears when running an RT patched
kernel on the AmLogic Meson AXG A113X SoC:
[ 11.111407] BUG: scheduling while atomic: kworker/0:1H/75/0x00010001
[ 11.111438] Modules linked in:
[ 11.111451] CPU: 0 PID: 75 Comm: kworker/0:1H Not tainted 6.4.0-rc3-rt2-rtx-00081-gfd07f41ed6b4-dirty #1
[ 11.111461] Hardware name: RTX AXG A113X Linux Platform Board (DT)
[ 11.111469] Workqueue: kblockd blk_mq_run_work_fn
[ 11.111492] Call trace:
[ 11.111497] dump_backtrace+0xac/0xe8
[ 11.111510] show_stack+0x18/0x28
[ 11.111518] dump_stack_lvl+0x48/0x60
[ 11.111530] dump_stack+0x18/0x24
[ 11.111537] __schedule_bug+0x4c/0x68
[ 11.111548] __schedule+0x80/0x574
[ 11.111558] schedule_loop+0x2c/0x50
[ 11.111567] schedule_rtlock+0x14/0x20
[ 11.111576] rtlock_slowlock_locked+0x468/0x730
[ 11.111587] rt_spin_lock+0x40/0x64
[ 11.111596] __wake_up_common_lock+0x5c/0xc4
[ 11.111610] __wake_up+0x18/0x24
[ 11.111620] mmc_blk_mq_req_done+0x68/0x138
[ 11.111633] mmc_request_done+0x104/0x118
[ 11.111644] meson_mmc_request_done+0x38/0x48
[ 11.111654] meson_mmc_irq+0x128/0x1f0
[ 11.111663] __handle_irq_event_percpu+0x70/0x114
[ 11.111674] handle_irq_event_percpu+0x18/0x4c
[ 11.111683] handle_irq_event+0x80/0xb8
[ 11.111691] handle_fasteoi_irq+0xa4/0x120
[ 11.111704] handle_irq_desc+0x20/0x38
[ 11.111712] generic_handle_domain_irq+0x1c/0x28
[ 11.111721] gic_handle_irq+0x8c/0xa8
[ 11.111735] call_on_irq_stack+0x24/0x4c
[ 11.111746] do_interrupt_handler+0x88/0x94
[ 11.111757] el1_interrupt+0x34/0x64
[ 11.111769] el1h_64_irq_handler+0x18/0x24
[ 11.111779] el1h_64_irq+0x64/0x68
[ 11.111786] __add_wait_queue+0x0/0x4c
[ 11.111795] mmc_blk_rw_wait+0x84/0x118
[ 11.111804] mmc_blk_mq_issue_rq+0x5c4/0x654
[ 11.111814] mmc_mq_queue_rq+0x194/0x214
[ 11.111822] blk_mq_dispatch_rq_list+0x3ac/0x528
[ 11.111834] __blk_mq_sched_dispatch_requests+0x340/0x4d0
[ 11.111847] blk_mq_sched_dispatch_requests+0x38/0x70
[ 11.111858] blk_mq_run_work_fn+0x3c/0x70
[ 11.111865] process_one_work+0x17c/0x1f0
[ 11.111876] worker_thread+0x1d4/0x26c
[ 11.111885] kthread+0xe4/0xf4
[ 11.111894] ret_from_fork+0x10/0x20
Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20230607082713.517157-1-martin@geanix.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Peilin Ye says:
====================
net/sched: Fix race conditions in mini_qdisc_pair_swap()
These 2 patches fix race conditions for ingress and clsact Qdiscs as
reported [1] by syzbot, split out from another [2] series (last 2 patches
of it). Per-patch changelog omitted.
Patch 1 hasn't been touched since last version; I just included
everybody's tag.
Patch 2 bases on patch 6 v1 of [2], with comments and commit log slightly
changed. We also need rtnl_dereference() to load ->qdisc_sleeping since
commit d636fc5dd692 ("net: sched: add rcu annotations around
qdisc->qdisc_sleeping"), so I changed that; please take yet another look,
thanks!
Patch 2 has been tested with the new reproducer Pedro posted [3].
[1] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b
[2] https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/
[3] https://lore.kernel.org/r/7879f218-c712-e9cc-57ba-665990f5f4c9@mojatatu.com/
====================
Link: https://lore.kernel.org/r/cover.1686355297.git.peilin.ye@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
print_report mm/kasan/report.c:430 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:536
mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Thread 1 A's refcnt Thread 2
RTM_NEWQDISC (A, RTNL-locked)
qdisc_create(A) 1
qdisc_graft(A) 9
RTM_NEWTFILTER (X, RTNL-unlocked)
__tcf_qdisc_find(A) 10
tcf_chain0_head_change(A)
mini_qdisc_pair_swap(A) (1st)
|
| RTM_NEWQDISC (B, RTNL-locked)
RCU sync 2 qdisc_graft(B)
| 1 notify_and_destroy(A)
|
tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked)
qdisc_destroy(A) tcf_chain0_head_change(B)
tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd)
mini_qdisc_pair_swap(A) (3rd) |
... ...
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Grafting ingress and clsact Qdiscs does not need a for-loop in
qdisc_graft(). Refactor it. No functional changes intended.
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.
Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
hardware for re-insertion as bidrectional once any new packet
arrives.
Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.4.0-rc5 #1 Not tainted
-----------------------------------------------------
kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7
and this task is already holding:
ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126
which would create a new lock dependency:
(&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&sta->rate_ctrl_lock){+.-.}-{2:2}
etc. etc. etc.
Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not
enough to pacify lockdep, but changing them all on pers.lock has worked.
Fixes: a8938bc881d2 ("wifi: iwlwifi: mvm: Add locking to the rate read flow")
Signed-off-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Minimal stack alignment on xtensa is 16 bytes, having stack dump in
32-byte lines may be visually misleading as the stack frame border may
be in the middle of the line.
Arrange stack dump in 16-byte lines. Mark lines at stack frame borders
with arrows.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Memory attached to instruction bus of the xtensa CPU is only accessible
for a limited subset of opcodes. Other opcodes generate an exception
with the load/store error cause code. This property complicates use of
such systems. Provide a handler that recognizes and transparently fixes
such exceptions. The following opcodes are recognized when used outside
of FLIX bundles: l32i, l32i.n, l16ui, l16si, l8ui.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
- extract initialization part of the exception handler into a separate
function.
- use single label for invalid instruction instead of two labels, one
for load and one for store, at one place.
- use sext instruction for sign extension when available.
- store SAR on the stack instead of in a0.
- replace numeric labels for load and store writeback with .Lload_w and
.Lstore_w respectively.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Currently slow handler for unaligned access exception is not installed
when CPU has hardware support for unaligned access. However some opcodes
(e.g. l32ai, s32ri, s32c1i) would still raise unaligned access exception
even on such CPUs. In that case instead of SIGBUS and a diagnostic entry
in the kernel log the faulting process would receive SIGILL.
Always install slow handler for unaligned access exception to fix that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There may be other users for the early traps besides KASAN. Move call to
the early_trap_init from kasan_early_init. Protect init_exc_table
initializer with ifdef to make sure it builds on noMMU configurations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Vlad Buslov says:
====================
Fix small bugs and annoyances in tc-testing
====================
Link: https://lore.kernel.org/r/20230612075712.2861848-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some qdiscs and classifiers have recently been retired from kernel.
However, tc-testing config is still cluttered with them which causes noise
when using merge_config.sh script to update existing config for tc-testing
compatibility. Remove the config settings for affected qdiscs and
classifiers.
Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc")
Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc")
Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc")
Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier")
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setting very small value of db like 10ms introduces rounding errors when
converting to/from jiffies on some kernel configs. For example, on 250hz
the actual value will be set to 12ms which causes the test to fail:
# $ sudo ./tdc.py -d eth2 -e 3410
# -- ns/SubPlugin.__init__
# Test 3410: Create SFB with db setting
#
# All test results:
#
# 1..1
# not ok 1 3410 - Create SFB with db setting
# Could not match regex pattern. Verify command output:
# qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p
Set the value to 100ms instead which currently seem to work on 100hz,
250hz, 300hz and 1000hz kernel configs.
Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing netfilter config dependency.
Fixes following example error when running tests via tdc.sh for all XT
tests:
# $ sudo ./tdc.py -d eth2 -e 2029
# Test 2029: Add xt action with log-prefix
# exit: 255
# exit: 0
# failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# -----> teardown stage *** Could not execute: "$TC actions flush action xt"
#
# -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action.
# We have an error flushing
# "
# returncode 1; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown)
# ---------------
# traceback
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
# res = run_one_test(pm, args, index, tidx)
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
# prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
# raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
# failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully
Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh
before running qdisc tests.
Fixes following example error when running tests via tdc.sh for all TEQL
tests:
# $ sudo ./tdc.py -d eth2 -e 84a0
# -- ns/SubPlugin.__init__
# Test 84a0: Create TEQL with default setting
# exit: 2
# exit: 0
# Error: Specified qdisc kind is unknown.
#
# -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root"
#
# -----> teardown stage *** Error message: "Error: Invalid handle.
# "
# returncode 2; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown)
# ---------------
# traceback
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
# res = run_one_test(pm, args, index, tidx)
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
# prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
# File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
# raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
# Error: Specified qdisc kind is unknown.
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully
Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This code returns directly but it should instead call of_node_put()
to drop some reference counts.
Fixes: dab2b265dd23 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the application sets ->msg_control and we have to later retry this
command, or if it got queued with IOSQE_ASYNC to begin with, then we
need to retain the original msg_control value. This is due to the net
stack overwriting this field with an in-kernel pointer, to copy it
in. Hitting that path for the second time will now fail the copy from
user, as it's attempting to copy from a non-user address.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/880
Reported-and-tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull NIOS2 dts fix from Dinh Nguyen:
- Fix tse_mac "max-frame-size" property
* tag 'nios2_fix_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: dts: Fix tse_mac "max-frame-size" property
|
|
Since commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for zonefs so that noop_direct_IO can eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Remove the function zonefs_file_dio_append() that is used to manually
issue REQ_OP_ZONE_APPEND BIOs for processing synchronous direct writes
and use iomap instead.
To preserve the use of zone append operations for synchronous writes,
different struct iomap_dio_ops are defined. For synchronous direct
writes using zone append, zonefs_zone_append_dio_ops is introduced.
The submit_bio operation of this structure is defined as the function
zonefs_file_zone_append_dio_submit_io() which is used to change the BIO
opreation for synchronous direct IO writes to REQ_OP_ZONE_APPEND.
In order to preserve the write location check on completion of zone
append BIOs, the end_io operation is also defined using the function
zonefs_file_zone_append_dio_bio_end_io(). This check now relies on the
zonefs_zone_append_bio structure, allocated together with zone append
BIOs with a dedicated BIO set. This structure include the target inode
of a zone append BIO as well as the target append offset location for
the zone append operation. This is used to perform a check against
bio->bi_iter.bi_sector when the BIO completes, without needing to use
the zone information z_wpoffset field, thus removing the need for
taking the inode truncate mutex.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
|
|
bio can be added to plug infinitely, and following writeback test can
trigger huge amount of plugged bio:
Test script:
modprobe brd rd_nr=4 rd_size=10485760
mdadm -CR /dev/md0 -l10 -n4 /dev/ram[0123] --assume-clean --bitmap=internal
echo 0 > /proc/sys/vm/dirty_background_ratio
fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 -iodepth=128 -name=test
Test result:
Monitor /sys/block/md0/inflight will found that inflight keep increasing
until fio finish writing, after running for about 2 minutes:
[root@fedora ~]# cat /sys/block/md0/inflight
0 4474191
Fix the problem by limiting the number of plugged bio based on the number
of copies for original bio.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-8-yukuai1@huaweicloud.com
|
|
current->bio_list will be set under submit_bio() context, in this case
bitmap io will be added to the list and wait for current io submission to
finish, while current io submission must wait for bitmap io to be done.
commit 874807a83139 ("md/raid1{,0}: fix deadlock in bitmap_unplug.") fix
the deadlock by handling plugged bio by daemon thread.
On the one hand, the deadlock won't exist after commit a214b949d8e3
("blk-mq: only flush requests from the plug in blk_mq_submit_bio"). On
the other hand, current solution makes it impossible to flush plugged bio
in raid1/10_make_request(), because this will cause that all the writes
will goto daemon thread.
In order to limit the number of plugged bio, commit 874807a83139
("md/raid1{,0}: fix deadlock in bitmap_unplug.") is reverted, and the
deadlock is fixed by handling bitmap io asynchronously.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-7-yukuai1@huaweicloud.com
|
|
If bitmap is enabled, bitmap must update before submitting write io, this
is why unplug callback must move these io to 'conf->pending_io_list' if
'current->bio_list' is not empty, which will suffer performance
degradation.
A new helper md_bitmap_unplug_async() is introduced to submit bitmap io
in a kworker, so that submit bitmap io in raid10_unplug() doesn't require
that 'current->bio_list' is empty.
This patch prepare to limit the number of plugged bio.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-6-yukuai1@huaweicloud.com
|
|
Commit 6cce3b23f6f8 ("[PATCH] md: write intent bitmap support for raid10")
add bitmap support, and it changed that write io is submitted through
daemon thread because bitmap need to be updated before write io. And
later, plug is used to fix performance regression because all the write io
will go to demon thread, which means io can't be issued concurrently.
However, if bitmap is not enabled, the write io should not go to daemon
thread in the first place, and plug is not needed as well.
Fixes: 6cce3b23f6f8 ("[PATCH] md: write intent bitmap support for raid10")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-5-yukuai1@huaweicloud.com
|
|
There are multiple places to do the same thing, factor out a helper to
prevent redundant code, and the helper will be used in following patch
as well.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-4-yukuai1@huaweicloud.com
|
|
The code in raid1 and raid10 is identical, prepare to limit the number
of plugged bios.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-3-yukuai1@huaweicloud.com
|
|
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-2-yukuai1@huaweicloud.com
|
|
When removing a disk with replacement, the replacement will be used to
replace rdev. During this process, there is a brief window in which both
rdev and replacement are read as NULL in raid10_write_request(). This
will result in io not being submitted but it should be.
//remove //write
raid10_remove_disk raid10_write_request
mirror->rdev = NULL
read rdev -> NULL
mirror->rdev = mirror->replacement
mirror->replacement = NULL
read replacement -> NULL
Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.
Fixes: 475b0321a4df ("md/raid10: writes should get directed to replacement as well as original.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230602091839.743798-3-linan666@huaweicloud.com
|
|
In raid10_sync_request(), if data cannot be read from any disk for
recovery, it will go to 'giveup' and let 'chunks_skipped' + 1. After
multiple 'giveup', when 'chunks_skipped >= geo.raid_disks', it will
return 'max_sector', indicating that the recovery has been completed.
However, the recovery is just aborted and the data remains inconsistent.
Fix it by setting mirror->recovery_disabled, which will prevent the spare
disk from being added to this mirror. The same issue also exists during
resync, it will be fixed afterwards.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230602091839.743798-2-linan666@huaweicloud.com
|
|
Commit 1a855a060665 ("md: fix bug with re-adding of partially recovered
device.") only add device which is set to In_sync. But it let devices
without metadata cannot be added when they should be.
Commit bf572541ab44 ("md: fix regression with re-adding devices to arrays
with no metadata") fix the above issue, it set device without metadata to
In_sync when add new disk.
However, after commit f466722ca614 ("md: Change handling of save_raid_disk
and metadata update during recovery.") deletes changes of the first patch,
setting In_sync for devcie without metadata is meanless because the flag
will be cleared soon and will not be used during this period. Clean it up.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527101851.3266500-2-linan666@huaweicloud.com
|
|
When add a new disk to raid10, it will traverse conf->mirror from start
and find one of the following mirror to add:
1. mirror->rdev is set to WantReplacement and it have no replacement,
set new disk to mirror->replacement.
2. no mirror->rdev, set new disk to mirror->rdev.
There is a array as below (sda is set to WantReplacement):
Number Major Minor RaidDevice State
0 8 0 0 active sync set-A /dev/sda
- 0 0 1 removed
2 8 32 2 active sync set-A /dev/sdc
3 8 48 3 active sync set-B /dev/sdd
Use 'mdadm --add' to add a new disk to this array, the new disk will
become sda's replacement instead of add to removed position, which is
confusing for users. Meanwhile, after new disk recovery success, sda
will be set to Faulty.
Prioritize adding disk to 'removed' mirror is a better choice. In the
above scenario, the behavior is the same as before, except sda will not
be deleted. Before other disks are added, continued use sda is more
reliable.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527092007.3008856-1-linan666@huaweicloud.com
|
|
'need_recover' and 'mrdev' are equivalent in raid10_sync_request(), and
inc mrdev->nr_pending is unreasonable if don't need recovery. Replace
'need_recover' with 'mrdev', and only inc nr_pending when needed.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527072218.2365857-3-linan666@huaweicloud.com
|
|
There are two check of 'mreplace' in raid10_sync_request(). In the first
check, 'need_replace' will be set and 'mreplace' will be used later if
no-Faulty 'mreplace' exists, In the second check, 'mreplace' will be
set to NULL if it is Faulty, but 'need_replace' will not be changed
accordingly. null-ptr-deref occurs if Faulty is set between two check.
Fix it by merging two checks into one. And replace 'need_replace' with
'mreplace' because their values are always the same.
Fixes: ee37d7314a32 ("md/raid10: Fix raid10 replace hang when new added disk faulty")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527072218.2365857-2-linan666@huaweicloud.com
|
|
When recovery is interrupted (reboot, etc.) check for MD_RECOVERY_RUNNING
is not enough to tell recovery is in progress. Also check recovery_cp
before starting reshape.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529133410.2125914-1-yukuai1@huaweicloud.com
|
|
Currently, there are many places that md_thread can be accessed without
protection, following are known scenarios that can cause
null-ptr-dereference or uaf:
1) sync_thread that is allocated and started from md_start_sync()
2) mddev->thread can be accessed directly from timeout_store() and
md_bitmap_daemon_work()
3) md_unregister_thread() from action_store().
Currently, a global spinlock 'pers_lock' is borrowed to protect
'mddev->thread' in some places, this problem can be fixed likewise,
however, use a global lock for all the cases is not good.
Fix this problem by protecting all md_thread with rcu.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-6-yukuai1@huaweicloud.com
|
|
Register/unregister 'mddev->thread' are both under 'reconfig_mutex',
however, some context didn't hold the mutex to access mddev->thread,
which can cause null-ptr-deference:
1) md_bitmap_daemon_work() can be called from md_check_recovery() where
'reconfig_mutex' is not held, deference 'mddev->thread' might cause
null-ptr-deference, because md_unregister_thread() reset the pointer
before stopping the thread.
2) timeout_store() access 'mddev->thread' multiple times,
null-ptr-deference can be triggered if 'mddev->thread' is reset in the
middle.
This patch factor out a helper to set timeout, the new helper always
check if 'mddev->thread' is null first, so that problem 1 can be fixed.
Now that this helper only access 'mddev->thread' once, but it's possible
that 'mddev->thread' can be freed while this helper is still in progress,
hence the problem is not fixed yet. Follow up patches will fix this by
protecting md_thread with rcu.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-5-yukuai1@huaweicloud.com
|
|
md_wakeup_thread() can handle the case that pass in md_thread is NULL,
the only difference is that md_wakeup_thread() will be called when
current timeout is 'MAX_SCHEDULE_TIMEOUT', this should not matter
because timeout_store() is not hot path, and the daemon process is
woke up more than demand from other context already.
Prepare to factor out a helper to set timeout.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-4-yukuai1@huaweicloud.com
|
|
md_wakeup_thread() handle the case that pass in md_thread is NULL, there
is no need to check this.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-3-yukuai1@huaweicloud.com
|
|
md_wakeup_thread() can't wakeup md_thread->tsk if md_thread->run is
still in progress, and in some cases md_thread->tsk need to be woke up
directly, like md_set_readonly() and do_md_stop().
Commit 9dfbdafda3b3 ("md: unlock mddev before reap sync_thread in
action_store") introduce a new scenario where unregister sync_thread is
not protected by 'reconfig_mutex', this can cause null-ptr-deference in
theroy:
t1: md_set_readonly t2: action_store
md_unregister_thread
// 'reconfig_mutex' is not held
// 'reconfig_mutex' is held by caller
if (mddev->sync_thread)
thread = *threadp
*threadp = NULL
wake_up_process(mddev->sync_thread->tsk)
// null-ptr-deference
Fix this problem by factoring out a helper to wake up md_thread directly,
so that 'sync_thread' won't be accessed multiple times from the reader
side. This helper also prepare to protect md_thread with rcu.
Noted that later patches is going to fix that unregister sync_thread is
not protected by 'reconfig_mutex' from action_store().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-2-yukuai1@huaweicloud.com
|
|
Commit 5792a2856a63 ("[PATCH] md: avoid a deadlock when removing a device
from an md array via sysfs") delays the deletion of rdev, however, this
introduces a window that rdev can be added again while the deletion is
not done yet, and sysfs will complain about duplicate filename.
Follow up patches try to fix this problem by flushing workqueue, however,
flush_rdev_wq() is just dead code, the progress in
md_kick_rdev_from_array():
1) list_del_rcu(&rdev->same_set);
2) synchronize_rcu();
3) queue_work(md_rdev_misc_wq, &rdev->del_work);
So in flush_rdev_wq(), if rdev is found in the list, work_pending() can
never pass, in the meantime, if work is queued, then rdev can never be
found in the list.
flush_rdev_wq() can be replaced by flush_workqueue() directly, however,
this approach is not good:
- the workqueue is global, this synchronization for all raid disks is
not necessary.
- flush_workqueue can't be called under 'reconfig_mutex', there is still
a small window between flush_workqueue() and mddev_lock() that other
contexts can queue new work, hence the problem is not solved completely.
sysfs already has apis to support delete itself through writer, and
these apis, specifically sysfs_break/unbreak_active_protection(), is used
to support deleting rdev synchronously. Therefore, the above commit can be
reverted, and sysfs duplicate filename can be avoided.
A new mdadm regression test is proposed as well([1]).
[1] https://lore.kernel.org/linux-raid/20230428062845.1975462-1-yukuai1@huaweicloud.com/
Fixes: 5792a2856a63 ("[PATCH] md: avoid a deadlock when removing a device from an md array via sysfs")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523012727.3042247-1-yukuai1@huaweicloud.com
|
|
Krister Johansen says:
====================
Hi,
Enclosed are a pair of patches for an oops that can occur if an exception is
generated while a bpf subprogram is running. One of the bpf_prog_aux entries
for the subprograms are missing an extable. This can lead to an exception that
would otherwise be handled turning into a NULL pointer bug.
These changes were tested via the verifier and progs selftests and no
regressions were observed.
Changes from v4:
- Ensure that num_exentries is copied to prog->aux from func[0] (Feedback from
Ilya Leoshkevich)
Changes from v3:
- Selftest style fixups (Feedback from Yonghong Song)
- Selftest needs to assert that test bpf program executed (Feedback from
Yonghong Song)
- Selftest should combine open and load using open_and_load (Feedback from
Yonghong Song)
Changes from v2:
- Insert only the main program's kallsyms (Feedback from Yonghong Song and
Alexei Starovoitov)
- Selftest should use ASSERT instead of CHECK (Feedback from Yonghong Song)
- Selftest needs some cleanup (Feedback from Yonghong Song)
- Switch patch order (Feedback from Alexei Starovoitov)
Changes from v1:
- Add a selftest (Feedback From Alexei Starovoitov)
- Move to a 1-line verifier change instead of searching multiple extables
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In certain situations a program with subprograms may have a NULL
extable entry. This should not happen, and when it does, it turns a
single trap into multiple. Add a test case for further debugging and to
prevent regressions.
The test-case contains three essentially identical versions of the same
test because just one program may not be sufficient to trigger the oops.
This is due to the fact that the items are stored in a binary tree and
have identical values so it's possible to sometimes find the ksym with
the extable. With 3 copies, this has been reliable on this author's
test systems.
When triggered out of this test case, the oops looks like this:
BUG: kernel NULL pointer dereference, address: 000000000000000c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1132 Comm: test_progs Tainted: G OE 6.4.0-rc3+ #2
RIP: 0010:cmp_ex_search+0xb/0x30
Code: cc cc cc cc e8 36 cb 03 00 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 48 89 e5 48 8b 07 <48> 63 0e 48 01 f1 31 d2 48 39 c8 19 d2 48 39 c8 b8 01 00 00 00 0f
RSP: 0018:ffffb30c4291f998 EFLAGS: 00010006
RAX: ffffffffc00b49da RBX: 0000000000000002 RCX: 000000000000000c
RDX: 0000000000000002 RSI: 000000000000000c RDI: ffffb30c4291f9e8
RBP: ffffb30c4291f998 R08: ffffffffab1a42d0 R09: 0000000000000001
R10: 0000000000000000 R11: ffffffffab1a42d0 R12: ffffb30c4291f9e8
R13: 000000000000000c R14: 000000000000000c R15: 0000000000000000
FS: 00007fb5d9e044c0(0000) GS:ffff92e95ee00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 000000010c3a2005 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
bsearch+0x41/0x90
? __pfx_cmp_ex_search+0x10/0x10
? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c
search_extable+0x3b/0x60
? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c
search_bpf_extables+0x10d/0x190
? bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c
search_exception_tables+0x5d/0x70
fixup_exception+0x3f/0x5b0
? look_up_lock_class+0x61/0x110
? __lock_acquire+0x6b8/0x3560
? __lock_acquire+0x6b8/0x3560
? __lock_acquire+0x6b8/0x3560
kernelmode_fixup_or_oops+0x46/0x110
__bad_area_nosemaphore+0x68/0x2b0
? __lock_acquire+0x6b8/0x3560
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x81/0xa0
exc_page_fault+0xd6/0x210
asm_exc_page_fault+0x2b/0x30
RIP: 0010:bpf_prog_45a7907e7114d0ff_handle_fexit_ret_subprogs3+0x2a/0x6c
Code: f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 7f 08 49 bb 00 00 00 00 00 80 00 00 4c 39 df 73 04 31 f6 eb 04 <48> 8b 77 00 49 bb 00 00 00 00 00 80 00 00 48 81 c7 7c 00 00 00 4c
RSP: 0018:ffffb30c4291fcb8 EFLAGS: 00010282
RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 00000000cddf1af1 RSI: 000000005315a00d RDI: ffffffffffffffea
RBP: ffffb30c4291fcb8 R08: ffff92e644bf38a8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000800000000000 R12: ffff92e663652690
R13: 00000000000001c8 R14: 00000000000001c8 R15: 0000000000000003
bpf_trampoline_251255721842_2+0x63/0x1000
bpf_testmod_return_ptr+0x9/0xb0 [bpf_testmod]
? bpf_testmod_test_read+0x43/0x2d0 [bpf_testmod]
sysfs_kf_bin_read+0x60/0x90
kernfs_fop_read_iter+0x143/0x250
vfs_read+0x240/0x2a0
ksys_read+0x70/0xe0
__x64_sys_read+0x1f/0x30
do_syscall_64+0x68/0xa0
? syscall_exit_to_user_mode+0x77/0x1f0
? do_syscall_64+0x77/0xa0
? irqentry_exit+0x35/0xa0
? sysvec_apic_timer_interrupt+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fb5da00a392
Code: ac 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
RSP: 002b:00007ffc5b3cab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000055bee7b8b100 RCX: 00007fb5da00a392
RDX: 00000000000001c8 RSI: 0000000000000000 RDI: 0000000000000009
RBP: 00007ffc5b3caba0 R08: 0000000000000000 R09: 0000000000000037
R10: 000055bee7b8c2a7 R11: 0000000000000246 R12: 000055bee78f1f60
R13: 00007ffc5b3cae90 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in: bpf_testmod(OE) nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common intel_uncore_frequency_common ppdev nfit crct10dif_pclmul crc32_pclmul psmouse ghash_clmulni_intel sha512_ssse3 aesni_intel parport_pc crypto_simd cryptd input_leds parport rapl ena i2c_piix4 mac_hid serio_raw ramoops reed_solomon pstore_blk drm pstore_zone efi_pstore autofs4 [last unloaded: bpf_testmod(OE)]
CR2: 000000000000000c
Though there may be some variation, depending on which suprogram
triggers the bug.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/4ebf95ec857cd785b81db69f3e408c039ad8408b.1686616663.git.kjlx@templeofstupid.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When subprograms are in use, the main program is not jit'd after the
subprograms because jit_subprogs sets a value for prog->bpf_func upon
success. Subsequent calls to the JIT are bypassed when this value is
non-NULL. This leads to a situation where the main program and its
func[0] counterpart are both in the bpf kallsyms tree, but only func[0]
has an extable. Extables are only created during JIT. Now there are
two nearly identical program ksym entries in the tree, but only one has
an extable. Depending upon how the entries are placed, there's a chance
that a fault will call search_extable on the aux with the NULL entry.
Since jit_subprogs already copies state from func[0] to the main
program, include the extable pointer in this state duplication.
Additionally, ensure that the copy of the main program in func[0] is not
added to the bpf_prog_kallsyms table. Instead, let the main program get
added later in bpf_prog_load(). This ensures there is only a single
copy of the main program in the kallsyms table, and that its tag matches
the tag observed by tooling like bpftool.
Cc: stable@vger.kernel.org
Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/6de9b2f4b4724ef56efbb0339daaa66c8b68b1e7.1686616663.git.kjlx@templeofstupid.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no input check when echo md/max_read_errors and overflow might
occur. Add check of input number.
Fixes: 1e50915fe0bb ("raid: improve MD/raid10 handling of correctable read errors.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230522072535.1523740-3-linan666@huaweicloud.com
|
|
There is no input check when echo md/safe_mode_delay in safe_delay_store().
And msec might also overflow when HZ < 1000 in safe_delay_show(), Fix it by
checking overflow in safe_delay_store() and use unsigned long conversion in
safe_delay_show().
Fixes: 72e02075a33f ("md: factor out parsing of fixed-point numbers")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230522072535.1523740-2-linan666@huaweicloud.com
|
|
If reshape is in progress and io across reshape_position is issued, such
io will wait for reshape to make progress(see details in the case that
make_stripe_request() return STRIPE_SCHEDULE_AND_RETRY).
It has been reported several times that if system reboot while growing
raid5 to raid6, array assemble will hang infinitely([1, 2]). This is
because following deadlock is triggered:
1) a normal io is waiting for reshape to progress, this io can be from
system-udevd or mdadm.
2) while assemble, mdadm tries to suspend the array, hence
'reconfig_mutex' is held and mddev_suspend() must wait for normal io
to be done.
3) daemon thread can't start reshape because 'reconfig_mutex' can't be
held.
1) and 3) is unbreakable because they're foundation design. In order to
break 2), following is possible solutions that I can think of:
a) Let mddev_suspend() fail is not a good option, because this will
break many scenarios since mddev_suspend() doesn't fail before.
b) Fail the io that is waiting for reshape to make progress from
mddev_suspend().
c) Return false for the io that is waiting for reshape to make
progress from raid5_make_request(), and these io will wait for
suspend to be done in md_handle_request(), where 'active_io' is
not grabbed.
c) sounds better than b), however, b) is used because it's easy and
straightforward, and it's verified that mdadm can assemble in this case.
On the other hand, c) breaks the logic that mddev_suspend() will wait
for submitted io to be completely handled.
Fix the problem by checking reshape in mddev_suspend(), if reshape can't
make progress and there are still some io waiting for reshape, fail
those io.
[1] https://lore.kernel.org/all/CAFig2csUV2QiomUhj_t3dPOgV300dbQ6XtM9ygKPdXJFSH__Nw@mail.gmail.com/
[2] https://lore.kernel.org/all/CAO2ABipzbw6QL5eNa44CQHjiVa-LTvS696Mh9QaTw+qsUKFUCw@mail.gmail.com/
Reported-by: Jove <jovetoo@gmail.com>
Reported-by: David Gilmour <dgilmour76@gmail.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-6-yukuai1@huaweicloud.com
|
|
There are no functional changes, the new api will be used later to do
special handling for raid456 in md_suspend().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-5-yukuai1@huaweicloud.com
|
|
The two apis will be used later to fix a deadlock in raid456, there are
no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-4-yukuai1@huaweicloud.com
|
|
Currently, if reshape is interrupted, echo "reshape" to sync_action will
restart reshape from scratch, for example:
echo frozen > sync_action
echo reshape > sync_action
This will corrupt data before reshape_position if the array is growing,
fix the problem by continue reshape from reshape_position.
Reported-by: Peter Neuwirth <reddunur@online.de>
Link: https://lore.kernel.org/linux-raid/e2f96772-bfbc-f43b-6da1-f520e5164536@online.de/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-3-yukuai1@huaweicloud.com
|
