summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-29drm/nv30/fb: split implementation into nv34(nv10)/nv30/nv35 piecesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-29drm/nv20/fb: split implementation into nv20/nv25 piecesBen Skeggs
There's more stuff that can be shared in the constructor, will be merged together again later. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-29drm/nouveau/fb: split tile and compression region handlingBen Skeggs
This is in preparation for extending the support to the remaining chipsets, to allow for sharing more functions. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-29drm/nouveau/bios: attempt to fetch entire acpi rom image in one shotBen Skeggs
v2: fdo#55948 - the _ROM method silently truncates size to 4KiB, perform a checksum test and fall back to slow _ROM access on failure. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-28drm/doc: add new dp helpers into drm DocBookDaniel Vetter
I didn't bother with documenting the really trivial new "extract something from dpcd" helpers, but the i2c over aux ch is now documented a bit. v2: Clarify the comment for i2c_dp_aux_add_bus a bit. v3: Fix more spelling fail spotted by Laurent Pinchart. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/doc: integrate fb helper reference into docsDaniel Vetter
Again only minimal changes to make kerneldoc no longer shout. Plus a little introduction in the form of a inline DOC: section to quickly explain what this is all about. v2: Fixup spelling fail. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/doc: integrate crtc helper api into docbookDaniel Vetter
- Add the missing doc for drm_helper_move_panel_connectors_to_head. - Fixup any outdated stuff in existing sections. I've only looked at those kerneldoc headers that actually resulted in a complaint from the kerneldoc parser tool. v2: - Actually include the docbook snippet in the right patch. - Fix spelling fail. v3: It's now called drm_crtc_helper_set_mode, spotted by Laurent Pinchart. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/doc: Helpers are not a Midlayer!Daniel Vetter
I'm devoting all my wrath to that fight, so don't misname it ;-) v2: Make it clear that this section talks about kms helpers. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/edid: tune down debug message in parse_hdmi_vsdbDaniel Vetter
Those tend to be totally not interesting for end-users, and for debugging we tend to dump the entire noise anyway by enabling all debug messages. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57388 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm: only build ati_pcigart if PCI enabledJames Hogan
Prevent ati_pcigart.c being built unless PCI is enabled. The exported functions in this file are only used by drivers which depend on PCI (namely r128 and radeon), and it tries to use PCI specific functions (pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause compiler errors when PCI is disabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/vmwgfx: Tighten the security around buffer mapsThomas Hellstrom
Make sure that other DRM clients can't map the contents of non-shareable buffer objects. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm: tegra: Add Tegra30 supportThierry Reding
Add support for host1x, the display controllers and HDMI on the Tegra30 SoC. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm: tegra: Use framebuffer pitch as line strideThierry Reding
Instead of using the stride derived from the display mode, use the pitch associated with the currently active framebuffer. This fixes a bug where the LCD display content would be skewed when enabling HDMI with a video mode different from that of the LCD. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/ttm: Optimize vm locking using kref_get_unless_zero v3Thomas Hellstrom
Removes the need for a write lock each time we call ttm_bo_unref(). v2: Remove an unused variable. v3: Really remove the unused variable. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/ttm: Use the hashtab _rcu interface for ttm_objectsThomas Hellstrom
Also move a kref_init() out of spinlocked region Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/ttm: Fix locking in an error pathThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm/vmwgfx: Free user-space fence objects correctlyThomas Hellstrom
They need to be freed after an rcu grace period. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28kref: Add kref_get_unless_zero documentationThomas Hellstrom
Document how kref_get_unless_zero should be used and how it helps solve a typical kref / locking problem. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28drm: Add a hash-tab rcu-safe APIThomas Hellstrom
While hashtab should now be RCU-safe, Add a drm_ht_xxx_api for consumers to use to make it obvious what locking mechanism is used. Document the way the rcu-safe interface should be used. Don't use rcu-safe list traversal in modify operations where we should use a spinlock / mutex anyway. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-21drm/vmwgfx: Add and make use of a header for surface size calculation.Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-21drm/vmwgfx: Break out surface and context management to separate filesThomas Hellstrom
Add a resource-private header for common resource definitions Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-21drm/vmwgfx: Refactor resource managementThomas Hellstrom
Refactor resource management to make it easy to hook up resources that are backed up by buffers. In particular, resources and their backing buffers can be evicted and rebound, if supported by the device. To avoid query deadlocks, the query code is also modified somewhat. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: Make vmw_dmabuf_unreference handle NULL objectsThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: Refactor module load to not require fifo unless fbdev is loadedThomas Hellstrom
This also fixes a bug where the fence manager was left without irq enabled when waiting for fences, causing various errors at module load time Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: Make screen object code not require fifo at init timeThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: Make overlay code not require fifo at init timeThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: Enable traces *after* we've hidden SVGAThomas Hellstrom
Hiding SVGA seems to trigger a VGA screen clear, and with no traces dirty it doesn't seem to repaint Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: alter cpu_writers to return -EBUSY in ttm_execbuf_util reservationsMaarten Lankhorst
This is similar to other platforms that don't allow command submission to buffers locked on the cpu. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: Optimize reservation slightlyThomas Hellstrom
Reservation locking currently always takes place under the LRU spinlock. Hence, strictly there is no need for an atomic_cmpxchg call; we can use atomic_read followed by atomic_write since nobody else will ever reserve without the lru spinlock held. At least on Intel this should remove a locked bus cycle on successful reserve. Note that thit commit may be obsoleted by the cross-device reservation work. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm, drm/vmwgfx: Use RCU locking for object lookups v3Thomas Hellstrom
The mostly used lookup+get put+potential_destroy path of TTM objects is converted to use RCU locks. This will substantially decrease the amount of locked bus cycles during normal operation. Since we use kfree_rcu to free the objects, no rcu synchronization is needed at module unload time. v2: Don't touch include/linux/kref.h v3: Adapt to kref_get_unless_zero return value change Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20kref: Implement kref_get_unless_zero v3Thomas Hellstrom
This function is intended to simplify locking around refcounting for objects that can be looked up from a lookup structure, and which are removed from that lookup structure in the object destructor. Operations on such objects require at least a read lock around lookup + kref_get, and a write lock around kref_put + remove from lookup structure. Furthermore, RCU implementations become extremely tricky. With a lookup followed by a kref_get_unless_zero *with return value check* locking in the kref_put path can be deferred to the actual removal from the lookup structure and RCU lookups become trivial. v2: Formatting fixes. v3: Invert the return value. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm: Make hashtab rcu-safeThomas Hellstrom
TTM base objects will be the first consumer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove sync_arg from driver functionsMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove sync_obj_arg from ttm_bo_move_accel_cleanupMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove sync_obj_arg memberMaarten Lankhorst
vmwgfx was its only user and always sets it to the same.. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/vmwgfx: remove use of fence_obj_argsMaarten Lankhorst
It's always hardcoded to the same value. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20DRM/KMS: Add Bail-Out Conditions for Loop.Egbert Eich
When trying to obtain an accurate timestamp for the last vsync interrupt in vblank_disable_and_save() we loop until the vsync counter after reading the time stamp is identical to the one before. In the case where no hardware timestamp can be obtained there is probably no point in trying to make sure we remain within the same vsync during the time we obtain the counter. Furthermore we should make sure there's an 'emergency exit' so that we don't end up in an endless loop when the driver get_vblank_timestamp() function doesn't manage to return within the same vsync. This may happen when this function prints out debugging information over a slow (ie serial) line. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm: don't unnecessarily enable the polling workDaniel Vetter
... by properly checking connector->polled. This doesn't matter too much because the polling work itself gets this slightly more right and doesn't set repoll if there's nothing to do. But we can do better. v2: Chris Wilson noticed that I broke polling, since repoll will never ever be set true. Fix this up, and simplify the logic a bit while at it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20vga_switcheroo: Drop unused include and unused variables.Igor Murzov
Signed-off-by: Igor Murzov <e-mail@date.by> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/nouveau: free memory allocated with alloc_apertures()Tommi Rantala
Fix a memory leak by deallocating the memory we got from alloc_apertures(). Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/radeon: check alloc_apertures() success in radeon_kick_out_firmware_fb()Tommi Rantala
Check for alloc_apertures() memory allocation failure, and propagate an error code in case the allocation failed. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/mgag200: remove unneeded aper->count assignment after alloc_apertures()Tommi Rantala
alloc_apertures() already does the assignment for us, so assigning the count member after the alloc_apertures() call is not needed. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/mgag200: free memory allocated with alloc_apertures()Tommi Rantala
Fix a memory leak by deallocating the memory we got from alloc_apertures(). Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/mgag200: check alloc_apertures() success in mga_vram_init()Tommi Rantala
Check for alloc_apertures() memory allocation failure, and propagate an error code in case the allocation failed. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/cirrus: check alloc_apertures() success in cirrus_kick_out_firmware_fb()Tommi Rantala
Check for alloc_apertures() memory allocation failure, and propagate an error code in case the allocation failed. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove ttm_mem_global->queueMarcin Slusarz
It's unused. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove ttm_bo_device->nice_modeMarcin Slusarz
It's unused. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/ttm: remove ttm_buffer_object->buffer_startMarcin Slusarz
All drivers set it to 0 and nothing uses it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm/radeon: Use hweight32Akinobu Mita
Use hweight32 instead of counting for each bit Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm: use memchr_inv()Akinobu Mita
Use memchr_inv() to check the specified memory region is filled with zero. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-10-01 10:14:48 +0000