summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-07drm/amdgpu: remove asymmetrical irq disabling in jpeg 4.0.5 suspendLi Ma
A supplement to commit: 615dd56ac5379f4239940be69139a33e79e59c67 There is an irq warning of jpeg during resume in s2idle process. No irq enabled in jpeg 4.0.5 resume. Fixes: 615dd56ac537 ("drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend") Signed-off-by: Li Ma <li.ma@amd.com> Acked-By: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: reset gpu for s3 suspend abort casePrike Liang
In the s3 suspend abort case some type of gfx9 power rail not turn off from FCH side and this will put the GPU in an unknown power status, so let's reset the gpu to a known good power state before reinitialize gpu device. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: skip to program GFXDEC registers for suspend abortPrike Liang
In the suspend abort cases, the gfx power rail doesn't turn off so some GFXDEC registers/CSB can't reset to default value and at this moment reinitialize GFXDEC/CSB will result in an unexpected error. So let skip those program sequence for the suspend abort case. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: set odm_combine_policy based on context in dcn32 resourceWenjing Liu
[why] When populating dml pipes, odm combine policy should be assigned based on the pipe topology of the context passed in. DML pipes could be repopulated multiple times during single validate bandwidth attempt. We need to make sure that whenever we repopulate the dml pipes it is always aligned with the updated context. There is a case where DML pipes get repopulated during FPO optimization after ODM combine policy is changed. Since in the current code we reinitlaize ODM combine policy, even though the current context has ODM combine enabled, we overwrite it despite the pipes are already split. This causes DML to think that MPC combine is used so we mistakenly enable MPC combine because we apply pipe split with ODM combine policy reset. This issue doesn't impact non windowed MPO with ODM case because the legacy policy has restricted use cases. We don't encounter the case where both ODM and FPO optimizations are enabled together. So we decide to leave it as is because it is about to be replaced anyway. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'Srinivasan Shanmugam
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'Srinivasan Shanmugam
'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/xe: Avoid cryptic message when there's no GuC definitionLucas De Marchi
If there's no GuC firmware entry in the table and the user didn't pass an override path, the error message is very cryptic: xe will simply try to continue and then fail when submitting the default context: xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_LUNARLAKE 64b0:0001 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:no dma_m_s:46 tc:1 gscfi:0 ... xe: probe of 0000:00:02.0 failed with error -22 Add an explicit error message and bail out: xe 0000:00:02.0: [drm:xe_pci_probe [xe]] XE_LUNARLAKE 64b0:0001 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:no dma_m_s:46 tc:1 gscfi:0 xe 0000:00:02.0: [drm] *ERROR* No GuC firmware defined for platform xe 0000:00:02.0: [drm] *ERROR* GuC init failed with -2 ... xe: probe of 0000:00:02.0 failed with error -2 Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240201224724.551130-3-lucas.demarchi@intel.com
2024-02-07drm/xe: Always allow to override firmwareLucas De Marchi
The current logic for firmware selection is reminiscent from i915 where there are 2 backends and several platforms support only 1: execlist or GuC. The xe driver has only the GuC backend and it simply doesn't work without it. Allow developers to override the firmware path even if there isn't a firmware entry in the table yet: this allows developers to more easily test the very first firmware before adding it there. The justification above is only true for GuC, however those override paths should really be viewed as developer aid param. Simply make the same logic for all firmwares and allow the override path to be used for all of them. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240201224724.551130-2-lucas.demarchi@intel.com
2024-02-07netfilter: nft_compat: restrict match/target protocol to u16Pablo Neira Ayuso
xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32. NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range validation to policy"). Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-07netfilter: nft_compat: reject unused compat flagPablo Neira Ayuso
Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL instead. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-07netfilter: nft_compat: narrow down revision to unsigned 8-bitsPablo Neira Ayuso
xt_find_revision() expects u8, restrict it to this datatype. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-02-07fs: relax mount_setattr() permission checksChristian Brauner
When we added mount_setattr() I added additional checks compared to the legacy do_reconfigure_mnt() and do_change_type() helpers used by regular mount(2). If that mount had a parent then verify that the caller and the mount namespace the mount is attached to match and if not make sure that it's an anonymous mount. The real rootfs falls into neither category. It is neither an anoymous mount because it is obviously attached to the initial mount namespace but it also obviously doesn't have a parent mount. So that means legacy mount(2) allows changing mount properties on the real rootfs but mount_setattr(2) blocks this. I never thought much about this but of course someone on this planet of earth changes properties on the real rootfs as can be seen in [1]. Since util-linux finally switched to the new mount api in 2.39 not so long ago it also relies on mount_setattr() and that surfaced this issue when Fedora 39 finally switched to it. Fix this. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2256843 Link: https://lore.kernel.org/r/20240206-vfs-mount-rootfs-v1-1-19b335eee133@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Karel Zak <kzak@redhat.com> Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-07PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignmentDan Carpenter
I recently changed the alignment code in dw_pcie_ep_raise_msix_irq(). The code in dw_pcie_ep_raise_msi_irq() is similar, so update it to match, just for consistency. (No effect on runtime, just a cleanup). Link: https://lore.kernel.org/r/184097e0-c728-42c7-9e8a-556bd33fb612@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-02-07PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()Dan Carpenter
The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org>
2024-02-07nvme-core: fix comment to reflect right functionsChaitanya Kulkarni
The functions and the attribute listed in the comment doesn't exists in the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store() and nvme_passthru_err_log_enabled_show()) Update the comment with right function names and a comment ns->head->passthru_err_log_enabled, nvme_io_passthru_err_log_enabled_store() and nvme_io_passthru_err_log_enabled_show(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-07Merge tag 'wireless-2024-02-06' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc4 This time we have unusually large wireless pull request. Several functionality fixes to both stack and iwlwifi. Lots of fixes to warnings, especially to MODULE_DESCRIPTION(). * tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits) wifi: mt76: mt7996: fix fortify warning wifi: brcmfmac: Adjust n_channels usage for __counted_by wifi: iwlwifi: do not announce EPCS support wifi: iwlwifi: exit eSR only after the FW does wifi: iwlwifi: mvm: fix a battery life regression wifi: mac80211: accept broadcast probe responses on 6 GHz wifi: mac80211: adding missing drv_mgd_complete_tx() call wifi: mac80211: fix waiting for beacons logic wifi: mac80211: fix unsolicited broadcast probe config wifi: mac80211: initialize SMPS mode correctly wifi: mac80211: fix driver debugfs for vif type change wifi: mac80211: set station RX-NSS on reconfig wifi: mac80211: fix RCU use in TDLS fast-xmit wifi: mac80211: improve CSA/ECSA connection refusal wifi: cfg80211: detect stuck ECSA element in probe resp wifi: iwlwifi: remove extra kernel-doc wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers wifi: fill in MODULE_DESCRIPTION()s for wilc1000 wifi: fill in MODULE_DESCRIPTION()s for wl18xx wifi: fill in MODULE_DESCRIPTION()s for p54spi ... ==================== Link: https://lore.kernel.org/r/20240206095722.CD9D2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07nvme: move passthrough logging attribute to headKeith Busch
The namespace does not have attributes, but the head does. Move the new logging attribute to that structure instead of dereferencing the wrong type. And while we're here, fix the reverse-tree coding style. Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging") Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com> Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-02-07riscv: Fix arch_tlbbatch_flush() by clearing the batch cpumaskAlexandre Ghiti
We must clear the cpumask once we have flushed the batch, otherwise cpus get accumulated and we end sending IPIs to more cpus than needed. Fixes: 54d7431af73e ("riscv: Add support for BATCHED_UNMAP_TLB_FLUSH") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20240130115508.105386-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-02-07Merge tag 'loongarch-fixes-6.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix acpi_core_pic[] array overflow, fix earlycon parameter if KASAN enabled, disable UBSAN instrumentation for vDSO build, and two Kconfig cleanups" * tag 'loongarch-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: vDSO: Disable UBSAN instrumentation LoongArch: Fix earlycon parameter if KASAN enabled LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it
2024-02-07riscv: declare overflow_stack as exported from traps.cBen Dooks
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c for use in the entry code, but is not declared anywhere. Add the relevant declaration to arch/riscv/include/asm/stacktrace.h to silence the following sparse warning: arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static? We don't add the stackinfo_get_overflow() call as for some of the other architectures as this doesn't seem to be used yet, so just silence the warning. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Fixes: be97d0db5f44 ("riscv: VMAP_STACK overflow detection thread-safe") Link: https://lore.kernel.org/r/20231123134214.81481-1-ben.dooks@codethink.co.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-02-07riscv: Fix arch_hugetlb_migration_supported() for NAPOTAlexandre Ghiti
arch_hugetlb_migration_supported() must be reimplemented to add support for NAPOT hugepages, which is done here. Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240130120114.106003-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-02-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86 guest: - Avoid false positive for check that only matters on AMD processors x86: - Give a hint when Win2016 might fail to boot due to XSAVES && !XSAVEC configuration - Do not allow creating an in-kernel PIT unless an IOAPIC already exists RISC-V: - Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc, scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa) S390: - fix CC for successful PQAP instruction - fix a race when creating a shadow page" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM x86/kvm: Fix SEV check in sev_map_percpu_data() KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum KVM: x86: Check irqchip mode before create PIT KVM: riscv: selftests: Add Zfa extension to get-reg-list test RISC-V: KVM: Allow Zfa extension for Guest/VM KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test RISC-V: KVM: Allow Zihintntl extension for Guest/VM KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test RISC-V: KVM: Allow vector crypto extensions for Guest/VM KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test RISC-V: KVM: Allow scalar crypto extensions for Guest/VM KVM: riscv: selftests: Add Zbc extension to get-reg-list test RISC-V: KVM: Allow Zbc extension for Guest/VM KVM: s390: fix cc for successful PQAP KVM: s390: vsie: fix race during shadow creation
2024-02-07Merge tag 'nfsd-6.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Address a deadlock regression in RELEASE_LOCKOWNER * tag 'nfsd-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: don't take fi_lock in nfsd_break_deleg_cb()
2024-02-07drm/amdgpu: Fix HDP flush for VFs on nbio v7.9Lijo Lazar
HDP flush remapping is not done for VFs. Keep the original offsets in VF environment. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Implement bounds check for stream encoder creation in DCN301Srinivasan Shanmugam
'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn301_stream_encoder_create reported by Smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <Roman.Li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Increase frame-larger-than for all display_mode_vba filesNathan Chancellor
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y and CONFIG_WERROR=y enabled) has a few new instances of -Wframe-larger-than for the mode support and system configuration functions: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. Without the sanitizers enabled, there are no warnings. This was the catalyst for commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2") and that same change was made to dml in commit 5b750b22530f ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml") but the frame_warn_flag variable was not applied to all files. Do so now to clear up the warnings and make all these files consistent. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issue/1990 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Clear phantom stream count and plane countMario Limonciello
When dc_state_destruct() was refactored the new phantom_stream_count and phantom_plane_count members weren't cleared. Fixes: 012a04b1d6af ("drm/amd/display: Refactor phantom resource allocation") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Simplify the calculation of variablesJiapeng Chong
./drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c:236:49-51: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8169 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: Avoid fetching VRAM vendor infoLijo Lazar
The present way to fetch VRAM vendor information turns out to be not reliable on GFX 9.4.3 dGPUs as well. Avoid using the data. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: 3.2.271Aric Cyr
This version brings along the following: - DCN35 fixes - DMUB fixes - Link training fixes - Misc code style fixes - MST fixes - ODM fixes - SubVP fixes Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Drop some unnecessary guardsRodrigo Siqueira
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code, which may cause confusion. This commit dropped some of the unnecessary guards. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Trivial code style adjustmentRodrigo Siqueira
Just adjust the code indentation in the header and add a simple comment in the dm_cp_psp file. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Disable ODM by default for DCN35Rodrigo Siqueira
Just ensure that ODM optimization is disabled by default. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Drop legacy codeRodrigo Siqueira
Display code keeps getting improvements, and because of that, some legacy code is left behind. This commit drops some of those unused codes. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Update phantom pipe enable / disable sequenceAlvin Lee
Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07Revert "drm/amd/display: For FPO and SubVP/DRR configs program vmin/max sel"Alvin Lee
This reverts commit 6b2b782ad6a25734ae847d1659bea3f613dbb563. Since, it was causing regression for some DRR scenarios. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Adjust set_p_state calls to fix loggingEthan Bitnun
Update the p_state type before update_clocks is called to ensure accurate values are used for logging. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ethan Bitnun <etbitnun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Add delay before logging clks from hwEthan Bitnun
Add a small delay before reading clks from hw, to ensure correct values are used for logging. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ethan Bitnun <etbitnun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo
The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: correct comment in set_default_brightness_aux()Camille Cho
0 nits is a valid default value for OLED panels. So, update the relevant comment to account for that fact. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Camille Cho <camille.cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe splitGeorge Shen
[Why] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [How] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Add debug option to force 1-tap chroma subsamplingGeorge Shen
[Why] Default driver behaviour is 3-tap subsampling, so we should keep it the same for test patterns as well. However, it is also useful to force 1-tap subsampling for testing purposes. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Disable idle reallow as part of command/gpint executionNicholas Kazlauskas
[Why] Workaroud for a race condition where DMCUB is in the process of committing to IPS1 during the handshake causing us to miss the transition into IPS2 and touch the INBOX1 RPTR causing a HW hang. [How] Disable the reallow to ensure that we have enough of a gap between entry and exit and we're not seeing back-to-back wake_and_executes. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: Fix shared buff copy to userStanley.Yang
ta if invoke node buffer |-------- ta type ----------| |-------- ta id ----------| |-------- cmd id ----------| |------ shared buf len -----| |------ shared buffer ------| ta if invoke node buffer is as above, copy shared buffer data to correct location Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Increase eval/entry delay for DCN35Nicholas Kazlauskas
[Why] To match firmware measurements and avoid hanging when accessing HW that's in idle. [How] Increase the delays to what we've measured. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Disable timeout in more places for dc_dmub_srvNicholas Kazlauskas
[Why] We're still missing a few and we'd like to avoid continuining when a hang occurs for debug purposes. [How] Add the loop anywhere we try to wait on rptr == wptr in dc_dmub_srv. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: Fix potential out-of-bounds access in ↵Srinivasan Shanmugam
'amdgpu_discovery_reg_base_init()' The issue arises when the array 'adev->vcn.vcn_config' is accessed before checking if the index 'adev->vcn.num_vcn_inst' is within the bounds of the array. The fix involves moving the bounds check before the array access. This ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array before it is used as an index. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use. Fixes: a0ccc717c4ab ("drm/amdgpu/discovery: validate VCN and SDMA instances") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/pm: Retrieve UMC ODECC error count from aca bankCandice Li
Instead of software managed counters. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Add more checks for exiting idle in DCNicholas Kazlauskas
[Why] Any interface that touches registers needs to wake up the system. [How] Add a new interface dc_exit_ips_for_hw_access that wraps the check for IPS support and insert it into the public DC interfaces that touch registers. We don't re-enter, since we expect that the enter/exit to have been done on the DM side. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: correct static screen event maskAllen Pan
[Why] Hardware register definition changed Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 20:10:42 +0000