summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-12net-device: move lstats in net_device_read_txrxEric Dumazet
dev->lstats is notably used from loopback ndo_start_xmit() and other virtual drivers. Per cpu stats updates are dirtying per-cpu data, but the pointer itself is read-only. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->tcp_usec_ts to tcp_sock_read_txrx groupEric Dumazet
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->scaling_ratio to tcp_sock_read_txrx groupEric Dumazet
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12drm/i915/dp: Limit SST link rate to <=8.1GbpsVille Syrjälä
Limit the link rate to HBR3 or below (<=8.1Gbps) in SST mode. UHBR (10Gbps+) link rates require 128b/132b channel encoding which we have not yet hooked up into the SST/no-sideband codepaths. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240208154552.14545-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 6061811d72e14f41f71b6a025510920b187bfcca) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-02-12drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg addressManasi Navare
Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10172 Fixes: bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240205204619.1991673-1-navaremanasi@chromium.org (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-02-12tools/rv: Fix curr_reactor uninitialized variableDaniel Bristot de Oliveira
clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -I include -c -o src/in_kernel.o src/in_kernel.c [...] src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 227 | if (!end) | ^~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false 227 | if (!end) | ^~~~~~~~~ 228 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 221 | if (!start) | ^~~~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false 221 | if (!start) | ^~~~~~~~~~~ 222 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning 215 | char *curr_reactor; | ^ | = NULL 2 warnings generated. Which is correct. Setting curr_reactor to NULL avoids the problem. Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rv: Fix Makefile compiler options for clangDaniel Bristot de Oliveira
The following errors are showing up when compiling rv with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -I include -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/in_kernel.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rv] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 4bc4b131d44c ("rv: Add rv tool") Suggested-by: Donald Zickus <dzickus@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Remove unused sched_getattr() functionDaniel Bristot de Oliveira
Clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function] 241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr, | ^~~~~~~~~~~~~ 1 warning generated. Which is correct, so remove the unused function. Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix clang warning about mount_point var sizeDaniel Bristot de Oliveira
clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: a957cbc02531 ("rtla: Add -C cgroup support") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix uninitialized bucket/data->bucket_size warningDaniel Bristot de Oliveira
When compiling rtla with clang, I am getting the following warnings: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [..] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/osnoise_hist.o src/osnoise_hist.c src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/osnoise_hist.c:149:6: note: uninitialized use occurs here 149 | if (bucket < entries) | ^~~~~~ src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 139 | bucket = duration / data->bucket_size; src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning 132 | int bucket; | ^ | = 0 1 warning generated. [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/timerlat_hist.o src/timerlat_hist.c src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/timerlat_hist.c:204:6: note: uninitialized use occurs here 204 | if (bucket < entries) | ^~~~~~ src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 182 | bucket = latency / data->bucket_size; src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning 175 | int bucket; | ^ | = 0 1 warning generated. This is a legit warning, but data->bucket_size is always > 0 (see timerlat_hist_parse_args()), so the if is not necessary. Remove the unneeded if (data->bucket_size) to avoid the warning. Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix Makefile compiler options for clangDaniel Bristot de Oliveira
The following errors are showing up when compiling rtla with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/osnoise.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rtla] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 1a7b22ab15eb ("tools/rtla: Build with EXTRA_{C,LD}FLAGS") Suggested-by: Donald Zickus <dzickus@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12drm/lima: standardize debug messages by ip nameErico Nunes
Some debug messages carried the ip name, or included "lima", or included both the ip name and then the numbered ip name again. Make the messages more consistent by always looking up and showing the ip name first. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-9-nunes.erico@gmail.com
2024-02-12drm/lima: increase default job timeout to 10sErico Nunes
The previous 500ms default timeout was fairly optimistic and could be hit by real world applications. Many distributions targeting devices with a Mali-4xx already bumped this timeout to a higher limit. We can be generous here with a high value as 10s since this should mostly catch buggy jobs like infinite loop shaders, and these don't seem to happen very often in real applications. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-8-nunes.erico@gmail.com
2024-02-12drm/lima: remove guilty drm_sched context handlingErico Nunes
Marking the context as guilty currently only makes the application which hits a single timeout problem to stop its rendering context entirely. All jobs submitted later are dropped from the guilty context. Lima runs on fairly underpowered hardware for modern standards and it is not entirely unreasonable that a rendering job may time out occasionally due to high system load or too demanding application stack. In this case it would be generally preferred to report the error but try to keep the application going. Other similar embedded GPU drivers don't make use of the guilty context flag. Now that there are reliability improvements to the lima timeout recovery handling, drop the guilty contexts to let the application keep running in this case. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-7-nunes.erico@gmail.com
2024-02-12drm/lima: handle spurious timeouts due to high irq latencyErico Nunes
There are several unexplained and unreproduced cases of rendering timeouts with lima, for which one theory is high IRQ latency coming from somewhere else in the system. This kind of occurrence may cause applications to trigger unnecessary resets of the GPU or even applications to hang if it hits an issue in the recovery path. Panfrost already does some special handling to account for such "spurious timeouts", it makes sense to have this in lima too to reduce the chance that it hit users. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-6-nunes.erico@gmail.com
2024-02-12drm/lima: set gp bus_stop bit before hard resetErico Nunes
This is required for reliable hard resets. Otherwise, doing a hard reset while a task is still running (such as a task which is being stopped by the drm_sched timeout handler) may result in random mmu write timeouts or lockups which cause the entire gpu to hang. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-5-nunes.erico@gmail.com
2024-02-12drm/lima: set pp bus_stop bit before hard resetErico Nunes
This is required for reliable hard resets. Otherwise, doing a hard reset while a task is still running (such as a task which is being stopped by the drm_sched timeout handler) may result in random mmu write timeouts or lockups which cause the entire gpu to hang. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-4-nunes.erico@gmail.com
2024-02-12drm/lima: reset async_reset on gp hard resetErico Nunes
Lima gp jobs use an async reset to avoid having to wait for the soft reset right after a job. The soft reset is done at the end of a job and a reset_complete flag is expected to be set at the next job. However, in case the user runs into a job timeout from any application, a hard reset is issued to the hardware. This hard reset clears the reset_complete flag, which causes an error message to show up before the next job. This is probably harmless for the execution but can be very confusing to debug, as it blames a reset timeout on the next application to submit a job. Reset the async_reset flag when doing the hard reset so that we don't get that message. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-3-nunes.erico@gmail.com
2024-02-12drm/lima: reset async_reset on pp hard resetErico Nunes
Lima pp jobs use an async reset to avoid having to wait for the soft reset right after a job. The soft reset is done at the end of a job and a reset_complete flag is expected to be set at the next job. However, in case the user runs into a job timeout from any application, a hard reset is issued to the hardware. This hard reset clears the reset_complete flag, which causes an error message to show up before the next job. This is probably harmless for the execution but can be very confusing to debug, as it blames a reset timeout on the next application to submit a job. Reset the async_reset flag when doing the hard reset so that we don't get that message. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-2-nunes.erico@gmail.com
2024-02-12accel/ivpu: Fix DevTLB errors on suspend/resume and recoveryJacek Lawrynowicz
Issue IP reset before shutdown in order to complete all upstream requests to the SOC. Without this DevTLB is complaining about incomplete transactions and NPU cannot resume from suspend. This problem is only happening on recent IFWI releases. IP reset in rare corner cases can mess up PCI configuration, so save it before the reset. After this happens it is also impossible to issue PLL requests and D0->D3->D0 cycle is needed to recover the NPU. Add WP 0 request on power up, so the PUNIT is always notified about NPU reset. Use D0/D3 cycle for recovery as it can recover from failed IP reset and FLR cannot. Fixes: 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
2024-02-12Merge tag 'drm-misc-next-2024-02-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: dma-buf: - clean up docs media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header Core Changes: ci: - add tests for msm managed: - add drmm_release_action() with tests ttm: - fix errno codes - simply busy-placement handling - fix page decryption docs: - add new external references - clean up Driver Changes: amdgpu: - clean up bridge: - imx: add i.MX8MP HDMI PVI plus DT bindings, add i.MX8MP HDMI TX plus DT bindings - samsung-dsim: add bsh-smm-s2/pro boards - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface - clean up imx: - use devm_ functions during init - clean up lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface nouveau: - clean up panel: - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization panel-orientation-quirks: - GPD Win Mini vmwgfx: - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime - clean up xlnx: - fix live video input for ZynqMP DPSUB Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240208164242.GA14321@linux.fritz.box
2024-02-12ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHTMark Brown
Merge series from Hans de Goede <hdegoede@redhat.com>: While testing 6.8 on a Bay Trail device with a ALC5640 codec I noticed a regression in 6.8 which causes a NULL pointer deref in probe(). All BYT/CHT Intel machine drivers are affected. Patch 1/2 of this series fixes all of them. Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for issues which I noticed while working on 1/2.
2024-02-11cifs: update the same create_guid on replayShyam Prasad N
File open requests made to the server contain a CreateGuid, which is used by the server to identify the open request. If the same request needs to be replayed, it needs to be sent with the same CreateGuid in the durable handle v2 context. Without doing so, we could end up leaking handles on the server when: 1. multichannel is used AND 2. connection goes down, but not for all channels This is because the replayed open request would have a new CreateGuid and the server will treat this as a new request and open a new handle. This change fixes this by reusing the existing create_guid stored in the cached fid struct. REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-11cifs: fix underflow in parse_server_interfaces()Dan Carpenter
In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that "bytes_left" is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending. Fixes: fe856be475f7 ("CIFS: parse and store info on iface queries") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-11drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculationsDmitry Baryshkov
Provide actual documentation for the pclk and hdisplay calculations in the case of DSC compression being used. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/577534/ Link: https://lore.kernel.org/r/20240208-fd_document_dsc_pclk_rate-v4-1-56fe59d0a2e0@linaro.org
2024-02-11drm/msm/dpu: drop dpu_encoder_phys_ops::atomic_check()Dmitry Baryshkov
Writeback was the last user of dpu_encoder_phys_ops's atomic_check() callback. As the code was moved to the dpu_writeback.c, the callback becomes unused. Drop it now. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577528/ Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-5-caf5dcd125c0@linaro.org
2024-02-11drm/msm/dpu: move writeback's atomic_check to dpu_writeback.cDmitry Baryshkov
dpu_encoder_phys_wb is the only user of encoder's atomic_check callback. Move corresponding checks to drm_writeback_connector's implementation and drop the dpu_encoder_phys_wb_atomic_check() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Paloma Arellano <quic_parellan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/577524/ Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-4-caf5dcd125c0@linaro.org
2024-02-11drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_setDmitry Baryshkov
The atomic_mode_set() callback only sets the phys_enc's IRQ data. As the INTF and WB are statically allocated to each encoder/phys_enc, drop the atomic_mode_set callback and set the IRQs during encoder init. For the CMD panel usecase some of IRQ indexes depend on the selected resources. Move setting them to the irq_enable() callback. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577529/ Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-3-caf5dcd125c0@linaro.org
2024-02-11drm/msm/dpu: split _dpu_encoder_resource_control_helper()Dmitry Baryshkov
Follow the _dpu_encoder_irq_control() change and split the _dpu_encoder_resource_control_helper() into enable and disable parts. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577525/ Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-2-caf5dcd125c0@linaro.org
2024-02-11drm/msm/dpu: split irq_control into irq_enable and _disableDmitry Baryshkov
The single helper for both enable and disable cases is too complicated, especially if we start adding more code to these helpers. Split it into irq_enable and irq_disable cases. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577526/ Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-1-caf5dcd125c0@linaro.org
2024-02-11drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabledMarijn Suijten
When the topology calls for two interfaces on the current fixed topology of 2 DSC blocks, or uses 1 DSC block for a single interface (e.g. SC7280 with only one DSC block), there should be no merging of DSC output. This is already represented by the return value of dpu_encoder_use_dsc_merge(), but not yet used to correctly configure this flag. Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577067/ Link: https://lore.kernel.org/r/20240204-dpu-dsc-multiplex-v1-1-080963233c52@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11drm/msm/dsi: Replace dsi_get_bpp() with mipi_dsi header functionMarijn Suijten
drm_mipi_dsi.h already provides a conversion function from MIPI_DSI_FMT_ to bpp, named mipi_dsi_pixel_format_to_bpp(). Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577065/ Link: https://lore.kernel.org/r/20240204-drm-msm-dsi-remove-open-coded-get-bpp-v1-1-c16212de7e86@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11dt-bindings: display: msm: sm8650-mdss: Add missing explicit ↵Rob Herring
"additionalProperties" In order to check schemas for missing additionalProperties or unevaluatedProperties, cases allowing extra properties must be explicit. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/576954/ Link: https://lore.kernel.org/r/20240202222338.1652333-1-robh@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_ENAbhinav Kumar
Currently INTF_CFG2_DATA_HCTL_EN is coupled with the enablement of widebus but this is incorrect because we should be enabling this bit independent of widebus except for cases where compression is enabled in one pixel per clock mode. Fix this by making the condition checks more explicit and enabling INTF_CFG2_DATA_HCTL_EN for all other cases when supported by DPU. Fixes: 3309a7563971 ("drm/msm/dpu: revise timing engine programming to support widebus feature") Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/576722/ Link: https://lore.kernel.org/r/20240201004737.2478-1-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11drm/msm/dp: drop dp_parserDmitry Baryshkov
Finally drop separate "parsing" submodule. There is no need in it anymore. All submodules handle DT properties directly rather than passing them via the separate structure pointer. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576116/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-15-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move next_bridge handling to dp_displayDmitry Baryshkov
Remove two levels of indirection and fetch next bridge directly in dp_display_probe_tail(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576126/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-14-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move link property handling to dp_panelDmitry Baryshkov
Instead of passing link properties through the separate struct, parse them directly in the dp_panel. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576117/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-13-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move all IO handling to dp_catalogDmitry Baryshkov
Rather than parsing the I/O addresses from dp_parser and then passing them via a struct pointer to dp_catalog, handle I/O region parsing in dp_catalog and drop it from dp_parser. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576108/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-12-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: handle PHY directly in dp_ctrlDmitry Baryshkov
There is little point in going trough dp_parser->io indirection each time the driver needs to access the PHY. Store the pointer directly in dp_ctrl_private. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576119/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-11-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: remove PHY handling from dp_catalog.cDmitry Baryshkov
Inline dp_catalog_aux_update_cfg() and call phy_calibrate() from dp_aux functions directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576106/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-10-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move phy_configure_opts to dp_ctrlDmitry Baryshkov
There is little point in sharing phy configuration structure between several modules. Move it to dp_ctrl, which becomes the only submodule re-configuring the PHY. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576124/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-9-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: split dp_ctrl_clk_enable into four functuionsDmitry Baryshkov
Split the dp_ctrl_clk_enable() beast into four functions, each of them doing just a single item: enabling or disabling core or link clocks. This allows us to cleanup the dss_module_power structure and makes several dp_ctrl functions return void. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576105/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-8-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: stop parsing clock names from DTDmitry Baryshkov
All supported platforms use the same clocks configuration. Instead of parsing names from DT in a pretty complex manner, use the static configuration. If at some point newer (or older) platforms have different clock configuration, this clock config can be moved to the device data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576115/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-7-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: simplify stream clocks handlingDmitry Baryshkov
There is only a single DP_STREAM_PM clock, stream_pixel. Instead of using a separate dss_module_power instance for this single clock, handle this clock directly. This allows us to drop several wrapping functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576102/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-6-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: fold dp_power into dp_ctrl moduleDmitry Baryshkov
The dp_power submodule is limited to handling the clocks only following previous cleanups. Fold it into the dp_ctrl submodule, removing one unnecessary level of indirection. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576104/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-5-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: inline dp_power_(de)initDmitry Baryshkov
In preparation to cleanup of the dp_power module, inline dp_power_init() and dp_power_deinit() functions, which are now just turning the clocks on and off. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576113/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-4-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: parse DT from dp_parser_getDmitry Baryshkov
It makes little sense to split the submodule get and actual DT parsing. Call dp_parser_parse() directly from dp_parser_get(), so that the parser data is fully initialised once it is returned to the caller. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576101/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-3-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: drop unused fields from dp_power_privateDmitry Baryshkov
Drop unused and obsolete fields from struct dp_power_private. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576100/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-2-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: drop unused parser definitionsDmitry Baryshkov
Drop several unused and obsolete definitions from the dp_parser module. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576110/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-1-098d5f581dd3@linaro.org
2024-02-11dt-bindings: msm: qcom, mdss: Include ommited fam-b compatibleAdam Skladowski
During conversion 28nm-hpm-fam-b compat got lost, add it. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Fixes: f7d46c5efee2 ("dt-bindings: display/msm: split qcom, mdss bindings") Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/575290/ Link: https://lore.kernel.org/r/20240121194221.13513-4-a39.skl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 03:25:50 +0000