summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-26i40e: missing priorities for any QoS trafficAleksandr Loktionov
This patch fixes reading f/w LLDP agent status at DCB init time. It's done by removing direct NVM reading in i40e_update_dcb_config() and checking whether f/w LLDP agent is disabled via I40E_FLAG_DISABLE_FW_LLDP flag in i40e_init_pf_dcb(). The function i40e_update_dcb_config() in i40e_main.c is a temporary solution which will be later renamed to i40e_init_dcb() in the i40e_dcb module. Also logging was extended to make visible if f/w LLDP agent is running or not and always log a message when DCB was not initialized. Without this patch for new f/w versions f/w LLDP agent status was always read from NVM as disabled and DCB initialization failed without clear reason in logs. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26i40e: Add log entry while creating or deleting TC0Piotr Kwapulinski
Generate log entry when TC0 is created or deleted. Log entry is generated during main VSI setup. Before there was no log info about adding or deleting TC0. Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26i40e: fix incorrect function documentation commentJacob Keller
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26i40e: Fix for missing "link modes" info in ethtoolMartyna Szapar
Fix for missing "Supported link modes" and "Advertised link modes" info in ethtool after changed speed on X722 devices with BASE-T PHY with FW API version >= 1.7. The same FW API version on X710 and X722 does not mean the same feature set so the change was needed as mac type of the device should also be checked instead of FW API version only. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speedsAleksandr Loktionov
This patch fixes 'NIC Link is Up, Unknown bps' message in dmesg for 2.5Gb/5Gb speeds. This problem is fixed by adding constants for VIRTCHNL_LINK_SPEED_2_5GB and VIRTCHNL_LINK_SPEED_5GB cases in the i40e_virtchnl_link_speed() function. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26ixgbevf: fix possible divide by zero in ixgbevf_update_itrYoung Xiao
The next call to ixgbevf_update_itr will continue to dynamically update ITR. Copy from commit bdbeefe8ea8c ("ixgbe: fix possible divide by zero in ixgbe_update_itr") Signed-off-by: Young Xiao <92siuyang@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26ixgbe: Check DDM existence in transceiver before accessMauro S. M. Rodrigues
Some transceivers may comply with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM) interface described in it. The existence of such area is specified by bit 6 of byte 92, set to 1 if implemented. Currently, due to not checking this bit ixgbe fails trying to read SFP module's eeprom with the follow message: ethtool -m enP51p1s0f0 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it was assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom data was confirmed by Mellanox as correct and present in other Passive DACs in from other manufacturers. Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-26net: stmmac: Fix crash observed if PHY does not support EEEJon Hunter
If the PHY does not support EEE mode, then a crash is observed when the ethernet interface is enabled. The crash occurs, because if the PHY does not support EEE, then although the EEE timer is never configured, it is still marked as enabled and so the stmmac ethernet driver is still trying to update the timer by calling mod_timer(). This triggers a BUG() in the mod_timer() because we are trying to update a timer when there is no callback function set because timer_setup() was never called for this timer. The problem is caused because we return true from the function stmmac_eee_init(), marking the EEE timer as enabled, even when we have not configured the EEE timer. Fix this by ensuring that we return false if the PHY does not support EEE and hence, 'eee_active' is not set. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: stmmac: Fix possible deadlock when disabling EEE supportJon Hunter
When stmmac_eee_init() is called to disable EEE support, then the timer for EEE support is stopped and we return from the function. Prior to stopping the timer, a mutex was acquired but in this case it is never released and so could cause a deadlock. Fix this by releasing the mutex prior to returning from stmmax_eee_init() when stopping the EEE timer. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv6: fix suspicious RCU usage in rt6_dump_route()Eric Dumazet
syzbot reminded us that rt6_nh_dump_exceptions() needs to be called with rcu_read_lock() net/ipv6/route.c:1593 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor609/8966: #0: 00000000b7dbe288 (rtnl_mutex){+.+.}, at: netlink_dump+0xe7/0xfb0 net/netlink/af_netlink.c:2199 #1: 00000000f2d87c21 (&(&tb->tb6_lock)->rlock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: 00000000f2d87c21 (&(&tb->tb6_lock)->rlock){+...}, at: fib6_dump_table.isra.0+0x37e/0x570 net/ipv6/ip6_fib.c:533 stack backtrace: CPU: 0 PID: 8966 Comm: syz-executor609 Not tainted 5.2.0-rc5+ #43 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5250 fib6_nh_get_excptn_bucket+0x18e/0x1b0 net/ipv6/route.c:1593 rt6_nh_dump_exceptions+0x45/0x4d0 net/ipv6/route.c:5541 rt6_dump_route+0x904/0xc50 net/ipv6/route.c:5640 fib6_dump_node+0x168/0x280 net/ipv6/ip6_fib.c:467 fib6_walk_continue+0x4a9/0x8e0 net/ipv6/ip6_fib.c:1986 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:2034 fib6_dump_table.isra.0+0x38a/0x570 net/ipv6/ip6_fib.c:534 inet6_dump_fib+0x93c/0xb00 net/ipv6/ip6_fib.c:624 rtnl_dump_all+0x295/0x490 net/core/rtnetlink.c:3445 netlink_dump+0x558/0xfb0 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x5b1/0x7d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:226 [inline] rtnetlink_rcv_msg+0x73d/0xb00 net/core/rtnetlink.c:5182 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:646 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:665 sock_write_iter+0x27c/0x3e0 net/socket.c:994 call_write_iter include/linux/fs.h:1872 [inline] new_sync_write+0x4d3/0x770 fs/read_write.c:483 __vfs_write+0xe1/0x110 fs/read_write.c:496 vfs_write+0x20c/0x580 fs/read_write.c:558 ksys_write+0x14f/0x290 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401b9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc8e134978 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401b9 RDX: 000000000000001c RSI: 0000000020000000 RDI: 00 Fixes: 1e47b4837f3b ("ipv6: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ipv4: fix suspicious RCU usage in fib_dump_info_fnhe()Eric Dumazet
sysbot reported that we lack appropriate rcu_read_lock() protection in fib_dump_info_fnhe() net/ipv4/route.c:2875 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor609/8966: #0: 00000000b7dbe288 (rtnl_mutex){+.+.}, at: netlink_dump+0xe7/0xfb0 net/netlink/af_netlink.c:2199 stack backtrace: CPU: 0 PID: 8966 Comm: syz-executor609 Not tainted 5.2.0-rc5+ #43 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5250 fib_dump_info_fnhe+0x9d9/0x1080 net/ipv4/route.c:2875 fn_trie_dump_leaf net/ipv4/fib_trie.c:2141 [inline] fib_table_dump+0x64a/0xd00 net/ipv4/fib_trie.c:2175 inet_dump_fib+0x83c/0xa90 net/ipv4/fib_frontend.c:1004 rtnl_dump_all+0x295/0x490 net/core/rtnetlink.c:3445 netlink_dump+0x558/0xfb0 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x5b1/0x7d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:226 [inline] rtnetlink_rcv_msg+0x73d/0xb00 net/core/rtnetlink.c:5182 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:646 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:665 sock_write_iter+0x27c/0x3e0 net/socket.c:994 call_write_iter include/linux/fs.h:1872 [inline] new_sync_write+0x4d3/0x770 fs/read_write.c:483 __vfs_write+0xe1/0x110 fs/read_write.c:496 vfs_write+0x20c/0x580 fs/read_write.c:558 ksys_write+0x14f/0x290 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401b9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc8e134978 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401b9 RDX: 000000000000001c RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000010 R11: 0000000000000246 R12: 0000000000401a40 R13: 0000000000401ad0 R14: 0000000000000000 R15: 0000000000000000 Fixes: ee28906fd7a1 ("ipv4: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26Revert "net: ena: ethtool: add extra properties retrieval via get_priv_flags"Jakub Kicinski
This reverts commit 315c28d2b714 ("net: ena: ethtool: add extra properties retrieval via get_priv_flags"). As discussed at netconf and on the mailing list we can't allow for the the abuse of private flags for exposing arbitrary device labels. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26Merge branch 'net-hns3-some-code-optimizations-bugfixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: some code optimizations & bugfixes This patch-set includes code optimizations and bugfixes for the HNS3 ethernet controller driver. [patch 1/11] fixes a selftest issue when doing autoneg. [patch 2/11 - 3-11] adds two code optimizations about VLAN issue. [patch 4/11] restores the MAC autoneg state after reset. [patch 5/11 - 8/11] adds some code optimizations and bugfixes about HW errors handling. [patch 9/11 - 11/11] fixes some issues related to driver loading and unloading. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: add exception handling when enable NIC HW error interruptsWeihang Li
If we failed to enable NIC HW error interrupts during client initialization in some cases, we should do exception handling to clear flags and free the resources. Fixes: 00ea6e5fda9d ("net: hns3: delay and separate enabling of NIC and ROCE HW errors") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: fixes wrong place enabling ROCE HW error when loadingHuazhong Tan
The ROCE HW errors should only be enabled when initializing ROCE's client, the current code enable it no matter initializing NIC or ROCE client. So this patch fixes it. Fixes: 00ea6e5fda9d ("net: hns3: delay and separate enabling of NIC and ROCE HW errors") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: fix race conditions between reset and module loading & unloadingHuazhong Tan
When loading or unloading module, it should wait for the reset task done before it un-initializes the client, otherwise the reset task may cause a NULL pointer reference. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: add check to number of buffer descriptorsWeihang Li
This patch adds check to number of bds before we allocate memory for them. If we get an invalid bd num in some cases, it will cause a memory overflow. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: remove override_pci_need_resetWeihang Li
We add override_pci_need_reset to prevent redundant and unwanted PF resets if a RAS error occurs in commit 69b51bbb03f7 ("net: hns3: fix to stop multiple HNS reset due to the AER changes"). Now in HNS3 driver, we use hw_err_reset_req to record reset level that we need to recover from a RAS error. This variable cans solve above issue as override_pci_need_reset, so this patch removes override_pci_need_reset. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: modify handling of out of memory in hclge_err.cWeihang Li
Users should be informed if HNS driver failed to allocate memory for descriptor when handling hw errors. This patch solve above issues. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: code optimizaition of hclge_handle_hw_ras_error()Weihang Li
This patch optimizes hclge_handle_hw_ras_error() to make the code logic clearer. 1. If there was no NIC or Roce RAS when we read HCLGE_RAS_PF_OTHER_INT_STS_REG, we return directly. 2. Because NIC and Roce RAS may occurs at the same time, so we should check value of revision at first before we handle Roce RAS instead of only checking it in branch of no NIC RAS is detected. 3. Check HCLGE_STATE_RST_HANDLING each time before we want to return PCI_ERS_RESULT_NEED_RESET. 4. Remove checking of HCLGE_RAS_REG_NFE_MASK and HCLGE_RAS_REG_ROCEE_ERR_MASK because if hw_err_reset_req is not zero, it proves that we have set it in handling of NIC or Roce RAS. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: restore the MAC autoneg state after resetJian Shen
When doing global reset, the MAC autoneg state of fibre port is set to default, which may cause user configuration lost. This patch fixes it by restore the MAC autoneg state after reset. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: sync VLAN filter entries when kill VLAN ID failedJian Shen
When HW is resetting, firmware is unable to handle commands from driver. So if remove VLAN device from stack at this time, it will fail to remove the VLAN ID from HW VLAN filter, then the VLAN filter status is unsynced with stack. This patch fixes it by recording the VLAN ID delete failed, and removes them again when reset complete. Fixes: 44e626f720c3 ("net: hns3: fix VLAN offload handle for VLAN inserted by port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: remove VF VLAN filter entry inexistent warning printJian Shen
For VF VLAN filter is disabled when VF VLAN table is full, then the new VLAN ID won't be added into VF VLAN table, it will always print fail log when remove these VLAN IDs. If user has added too many VLANs, it will cause massive verbose print logs. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: hns3: fix selftest fail issue for fibre port with autoneg onJian Shen
When doing selftest for fibre port with autoneg on, the MAC speed may be incorrect, which may cause the selftest failed. This patch fixes it by halting autoneg during the selftest. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26bonding: Always enable vlan tx offloadYueHaibing
We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ath: fix SPDX tagsKalle Valo
Commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig") marked various Makefiles and Kconfig files within ath directories as GPL-2.0. But these modules and drivers are actually ISC: * ath * ar5523 * ath10k * ath5k * ath6kl * ath9k * wcn36xx * wil6210 Fix SPDX tags accordingly. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-26perf tools: Remove trim() implementation, use tools/lib's strim()Arnaldo Carvalho de Melo
Moving more stuff out of tools/perf/util/ and using the kernel idiom. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wpj8rktj62yse5dq6ckny6de@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26cpu/speculation: Warn on unsupported mitigations= parameterGeert Uytterhoeven
Currently, if the user specifies an unsupported mitigation strategy on the kernel command line, it will be ignored silently. The code will fall back to the default strategy, possibly leaving the system more vulnerable than expected. This may happen due to e.g. a simple typo, or, for a stable kernel release, because not all mitigation strategies have been backported. Inform the user by printing a message. Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
2019-06-26tools lib: Adopt strim() from the kernelArnaldo Carvalho de Melo
Since we're working on moving stuff out of tools/perf/util/ to tools/lib/, take the opportunity to adopt routines from the kernel that are equivalent, so that tools/ code look more like the kernel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: André Goddard Rosa <andre.goddard@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-zqy1zdu2ok17qvi0ytk8z13c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26Merge tag 'timers-v5.4' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/events updates from Daniel Lezcano: - Rewrite of the davinci timer resulting to an immutable branch to be shared with davinci platform specific tree (Bartosz Golaszewski) - Cleanup and improvements of the tegra timer (Dmitry Osipenko) - Add new nxp system counter timer (Bai Ping) - Increase priority for exynos_mct to take over the initialization of the IP the arch ARM timer depends on (Marek Szyprowski) - Change macro use _BITUL() by BIT() on arc timer (Masahiro Yamada) - Implement the delay timer on ixp4xx (Linus Walleij) - Add the SPDX license identifier on the meson timer (Neil Armstrong)
2019-06-26perf tools: Ditch rtrim(), use skip_spaces() to get closer to the kernelArnaldo Carvalho de Melo
No change in behaviour, just using the same kernel idiom for such operation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: André Goddard Rosa <andre.goddard@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-a85lkptkt0ru40irpga8yf54@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26x86/speculation: Allow guests to use SSBD even if host does notAlejandro Jimenez
The bits set in x86_spec_ctrl_mask are used to calculate the guest's value of SPEC_CTRL that is written to the MSR before VMENTRY, and control which mitigations the guest can enable. In the case of SSBD, unless the host has enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in the kernel parameters), the SSBD bit is not set in the mask and the guest can not properly enable the SSBD always on mitigation mode. This has been confirmed by running the SSBD PoC on a guest using the SSBD always on mitigation mode (booted with kernel parameter "spec_store_bypass_disable=on"), and verifying that the guest is vulnerable unless the host is also using SSBD always on mode. In addition, the guest OS incorrectly reports the SSB vulnerability as mitigated. Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports it, allowing the guest to use SSBD whether or not the host has chosen to enable the mitigation in any of its modes. Fixes: be6fcb5478e9 ("x86/bugs: Rework spec_ctrl base and mask logic") Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: bp@alien8.de Cc: rkrcmar@redhat.com Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.com
2019-06-26perf report: Use skip_spaces()Arnaldo Carvalho de Melo
No change in behaviour intended. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lcywlfqbi37nhegmhl1ar6wg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26perf metricgroup: Use strsep()Arnaldo Carvalho de Melo
No change in behaviour intended, trivial optimization done by avoiding looking for spaces in 'g' right after setting it to "No_group". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-f2siadtp3hb5o0l1w7bvd8bk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26perf strfilter: Use skip_spaces()Arnaldo Carvalho de Melo
No change in behaviour. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-p9rtamq7lvre9zhti70azfwe@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26perf probe: Use skip_spaces() for argv handlingArnaldo Carvalho de Melo
The skip_sep() routine has the same implementation as skip_spaces(), recently adopted from the kernel, sources, switch to it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-0ix211a81z2016dl5nmtdci4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-26Merge branch 'timers/drivers/davinci' into timers/drivers/nextDaniel Lezcano
2019-06-26pinctrl: mediatek: Ignore interrupts that are wake only during resumeNicolas Boichat
Before suspending, mtk-eint would set the interrupt mask to the one in wake_mask. However, some of these interrupts may not have a corresponding interrupt handler, or the interrupt may be disabled. On resume, the eint irq handler would trigger nevertheless, and irq/pm.c:irq_pm_check_wakeup would be called, which would try to call irq_disable. However, if the interrupt is not enabled (irqd_irq_disabled(&desc->irq_data) is true), the call does nothing, and the interrupt is left enabled in the eint driver. Especially for level-sensitive interrupts, this will lead to an interrupt storm on resume. If we detect that an interrupt is only in wake_mask, but not in cur_mask, we can just mask it out immediately (as mtk_eint_resume would do anyway at a later stage in the resume sequence, when restoring cur_mask). Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-26x86/kexec: Make variable static and config dependentTiezhu Yang
The following sparse warning is emitted: arch/x86/kernel/crash.c:59:15: warning: symbol 'crash_zero_bytes' was not declared. Should it be static? The variable is only used in this compilation unit, but it is also only used when CONFIG_KEXEC_FILE is enabled. Just making it static would result in a 'defined but not used' warning for CONFIG_KEXEC_FILE=n. Make it static and move it into the existing CONFIG_KEXEC_FILE section. [ tglx: Massaged changelog and moved it into the existing ifdef ] Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call") Signed-off-by: Tiezhu Yang <kernelpatch@126.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dave Young <dyoung@redhat.com> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: kexec@lists.infradead.org Cc: vgoyal@redhat.com Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/117ef0c6.3d30.16b87c9cfbf.Coremail.kernelpatch@126.com
2019-06-26xdp: Make __mem_id_disconnect staticYueHaibing
Fix sparse warning: net/core/xdp.c:88:6: warning: symbol '__mem_id_disconnect' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26samples: bpf: make the use of xdp samples consistentDaniel T. Lee
Currently, each xdp samples are inconsistent in the use. Most of the samples fetch the interface with it's name. (ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.) But some of the xdp samples are fetching the interface with ifindex by command argument. This commit enables xdp samples to fetch interface with it's name without changing the original index interface fetching. (<ifname|ifindex> fetching in the same way as xdp_sample_pkts_user.c does.) Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26x86/speculation/mds: Eliminate leaks by trace_hardirqs_on()Zhenzhong Duan
Move mds_idle_clear_cpu_buffers() after trace_hardirqs_on() to ensure all store buffer entries are flushed. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jgross@suse.com Cc: ndesaulniers@google.com Cc: gregkh@linuxfoundation.org Link: https://lkml.kernel.org/r/1561260904-29669-2-git-send-email-zhenzhong.duan@oracle.com
2019-06-26x86/platform/geode: Drop <linux/gpio.h> includesLinus Walleij
These board files only use gpio_keys not gpio in general. This include is just surplus, delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-gpio@vger.kernel.org Cc: Andres Salomon <dilinger@queued.net> Cc: linux-geode@lists.infradead.org Cc: Andy Shevchenko <andy@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: platform-driver-x86@vger.kernel.org Link: https://lkml.kernel.org/r/20190626092119.3172-1-linus.walleij@linaro.org
2019-06-26rslib: Fix remaining decoder flawsFerdinand Blomqvist
The decoder is flawed in the following ways: - The decoder sometimes fails silently, i.e. it announces success but returns a word that is not a codeword. - The return value of the decoder is incoherent with respect to how fixed erasures are counted. If the word to be decoded is a codeword, then the decoder always returns zero even if some erasures are given. On the other hand, if the word to be decoded contains errors, then the number of erasures is always included in the count of corrected symbols. So the decoder handles erasures without symbol corruption inconsistently. This inconsistency probably doesn't affect anyone using the decoder, but it is inconsistent with the documentation. - The error positions returned in eras_pos include all erasures, but the corrections are only set in the correction buffer if there actually is a symbol error. So if there are erasures without symbol corruption, then the correction buffer will contain errors (unless initialized to zero before calling the decoder) or some values will be unset (if the correction buffer is uninitialized). - When correcting data in-place the decoder does not correct errors in the parity. On the other hand, when returning the errors in correction buffers, errors in the parity are included. The respective fixed are: - The syndrome of a codeword is always zero, and the syndrome is linear, .i.e, S(x+e) = S(x) + S(e). So compute the syndrome for the error and check whether it equals the syndrome of the received word. If it does, then we have decoded to a valid codeword, otherwise we know that we have an uncorrectable error. Fortunately, some unrecoverable error conditions can be detected earlier in the decoding, which saves some processing power. - Simply count and return the number of symbols actually corrected. - Make sure to only return positions where symbols were corrected. - Also fix errors in parity when correcting in-place. Another option would be to completely disregard errors in the parity, but then the interface makes it impossible to write tests that test for silent failures. Other changes: - Only fill the correction buffer and error position buffer if both of them are provided. Otherwise correct in place. Previously the error position buffer was always populated with the positions of the corrected errors, irrespective of whether a correction buffer was supplied or not. The rationale for this change is that there seems to be two use cases for the decoder; correct in-place or use the correction buffers. The caller does not need the positions of the corrected errors when in-place correction is used. If in-place correction is not used, then both the correction buffer and error position buffer need to be populated. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-8-ferdinand.blomqvist@gmail.com
2019-06-26rslib: Update documentationFerdinand Blomqvist
The decoder returns the number of corrected symbols, not bits. The caller provided syndrome must be in index form. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-7-ferdinand.blomqvist@gmail.com
2019-06-26rslib: Fix handling of of caller provided syndromeFerdinand Blomqvist
Check if the syndrome provided by the caller is zero, and act accordingly. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-6-ferdinand.blomqvist@gmail.com
2019-06-26rslib: decode_rs: Code cleanupFerdinand Blomqvist
Nothing useful was done after the finish label when count is negative so return directly instead of jumping to finish. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-5-ferdinand.blomqvist@gmail.com
2019-06-26rslib: decode_rs: Fix length parameter checkFerdinand Blomqvist
The length of the data load must be at least one. Or in other words, there must be room for at least 1 data and nroots parity symbols after shortening the RS code. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-4-ferdinand.blomqvist@gmail.com
2019-06-26rslib: Fix decoding of shortened codesFerdinand Blomqvist
The decoding of shortenend codes is broken. It only works as expected if there are no erasures. When decoding with erasures, Lambda (the error and erasure locator polynomial) is initialized from the given erasure positions. The pad parameter is not accounted for by the initialisation code, and hence Lambda is initialized from incorrect erasure positions. The fix is to adjust the erasure positions by the supplied pad. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-3-ferdinand.blomqvist@gmail.com
2019-06-26rslib: Add tests for the encoder and decoderFerdinand Blomqvist
A Reed-Solomon code with minimum distance d can correct any error and erasure pattern that satisfies 2 * #error + #erasures < d. If the error correction capacity is exceeded, then correct decoding cannot be guaranteed. The decoder must, however, return a valid codeword or report failure. There are two main tests: - Check for correct behaviour up to the error correction capacity - Check for correct behaviour beyond error corrupted capacity Both tests are simple: 1. Generate random data 2. Encode data with the chosen code 3. Add errors and erasures to data 4. Decode the corrupted word 5. Check for correct behaviour When testing up to capacity we test for: - Correct decoding - Correct return value (i.e. the number of corrected symbols) - That the returned error positions are correct There are two kinds of erasures; the erased symbol can be corrupted or not. When counting the number of corrected symbols, erasures without symbol corruption should not be counted. Similarly, the returned error positions should only include positions where a correction is necessary. We run the up to capacity tests for three different interfaces of decode_rs: - Use the correction buffers - Use the correction buffers with syndromes provided by the caller - Error correction in place (does not check the error positions) When testing beyond capacity test for silent failures. A silent failure is when the decoder returns success but the returned word is not a valid codeword. There are a couple of options for the tests: - Verbosity. - Whether to test for correct behaviour beyond capacity. Default is to test beyond capacity. - Whether to allow erasures without symbol corruption. Defaults to yes. Note that the tests take a couple of minutes to complete. Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190620141039.9874-2-ferdinand.blomqvist@gmail.com
generated by cgit (git 2.34.1) at 2025-09-23 17:36:18 +0000