summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-06Bluetooth: btqca: inject command complete event during fw downloadBalakrishna Godavarthi
Latest qualcomm chips are not sending an command complete event for every firmware packet sent to chip. They only respond with a vendor specific event for the last firmware packet. This optimization will decrease the BT ON time. Due to this we are seeing a timeout error message logs on the console during firmware download. Now we are injecting a command complete event once we receive an vendor specific event for the last RAM firmware packet. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Cleanup formatting and coding styleFabian Schindlatz
Fix some warnings and one error reported by checkpatch.pl: - lines longer than 80 characters are wrapped - empty lines inserted to separate variable declarations from the actual code - line break inserted after if (...) Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Cc: linux-kernel@i4.cs.fau.de Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: Refactor download_firmwareFabian Schindlatz
Extract the new function send_command_from_firmware from download_firmware, which helps with the readability of the switch statement. This way the code is less deeply nested and also no longer exceeds the 80 character limit. Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: set operational frequency earlierPhilipp Puschmann
Uploading the firmware needs quite a few seconds if done at 115200 kbps. So set the operational frequency, usually 3 MHz, before uploading the firmware. I have successfully tested this with a wl1837mod. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btsdio: Do not bind to non-removable BCM4356Peter Robinson
BCM4356 devices soldered onto the PCB (non-removable) use an UART connection for bluetooth, such as the Rock960, but it also advertise btsdio support as a sdio function. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06irq/irqdomain: Fix comment typoZenghui Yu
Fix typo in the comment on top of __irq_domain_add(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562388072-23492-1-git-send-email-yuzenghui@huawei.com
2019-07-06genirq: Update irq stats from NMI handlersShijith Thotton
The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi() do not update the interrupt counts. Due to that the NMI interrupt count does not show up correctly in /proc/interrupts. Add the statistics and treat the NMI handlers in the same way as per cpu interrupts and prevent them from updating irq_desc::tot_count as this might be corrupted due to concurrency. [ tglx: Massaged changelog ] Fixes: 2dcf1fbcad35 ("genirq: Provide NMI handlers") Signed-off-by: Shijith Thotton <sthotton@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.com
2019-07-06ACPI: PM: Make acpi_sleep_state_supported() non-staticDexuan Cui
With some upcoming patches to save/restore the Hyper-V drivers related states, a Linux VM running on Hyper-V will be able to hibernate. When a Linux VM hibernates, unluckily we must disable the memory hot-add/remove and balloon up/down capabilities in the hv_balloon driver (drivers/hv/hv_balloon.c), because these can not really work according to the design of the related back-end driver on the host. By default, Hyper-V does not enable the virtual ACPI S4 state for a VM; on recent Hyper-V hosts, the administrator is able to enable the virtual ACPI S4 state for a VM, so we hope to use the presence of the virtual ACPI S4 state as a hint for hv_balloon to disable the aforementioned capabilities. In this way, hibernation will work more reliably, from the user's perspective. By marking acpi_sleep_state_supported() non-static, we'll be able to implement a hv_is_hibernation_supported() API in the always-built-in module arch/x86/hyperv/hv_init.c, and the API will be called by hv_balloon. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-06netfilter: nf_tables: force module load in case select_ops() returns -EAGAINPablo Neira Ayuso
nft_meta needs to pull in the nft_meta_bridge module in case that this is a bridge family rule from the select_ops() path. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-05Revert "mm: page cache: store only head pages in i_pages"Linus Torvalds
This reverts commit 5fd4ca2d84b249f0858ce28cf637cf25b61a398f. Mikhail Gavrilov reports that it causes the VM_BUG_ON_PAGE() in __delete_from_swap_cache() to trigger: page:ffffd6d34dff0000 refcount:1 mapcount:1 mapping:ffff97812323a689 index:0xfecec363 anon flags: 0x17fffe00080034(uptodate|lru|active|swapbacked) raw: 0017fffe00080034 ffffd6d34c67c508 ffffd6d3504b8d48 ffff97812323a689 raw: 00000000fecec363 0000000000000000 0000000100000000 ffff978433ace000 page dumped because: VM_BUG_ON_PAGE(entry != page) page->mem_cgroup:ffff978433ace000 ------------[ cut here ]------------ kernel BUG at mm/swap_state.c:170! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 221 Comm: kswapd0 Not tainted 5.2.0-0.rc2.git0.1.fc31.x86_64 #1 Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 2202 04/11/2019 RIP: 0010:__delete_from_swap_cache+0x20d/0x240 Code: 30 65 48 33 04 25 28 00 00 00 75 4a 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c6 2f dc 0f 8a 48 89 c7 e8 93 1b fd ff <0f> 0b 48 c7 c6 a8 74 0f 8a e8 85 1b fd ff 0f 0b 48 c7 c6 a8 7d 0f RSP: 0018:ffffa982036e7980 EFLAGS: 00010046 RAX: 0000000000000021 RBX: 0000000000000040 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffff97843d657900 RBP: 0000000000000001 R08: ffffa982036e7835 R09: 0000000000000535 R10: ffff97845e21a46c R11: ffffa982036e7835 R12: ffff978426387120 R13: 0000000000000000 R14: ffffd6d34dff0040 R15: ffffd6d34dff0000 FS: 0000000000000000(0000) GS:ffff97843d640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002cba88ef5000 CR3: 000000078a97c000 CR4: 00000000003406e0 Call Trace: delete_from_swap_cache+0x46/0xa0 try_to_free_swap+0xbc/0x110 swap_writepage+0x13/0x70 pageout.isra.0+0x13c/0x350 shrink_page_list+0xc14/0xdf0 shrink_inactive_list+0x1e5/0x3c0 shrink_node_memcg+0x202/0x760 shrink_node+0xe0/0x470 balance_pgdat+0x2d1/0x510 kswapd+0x220/0x420 kthread+0xfb/0x130 ret_from_fork+0x22/0x40 and it's not immediately obvious why it happens. It's too late in the rc cycle to do anything but revert for now. Link: https://lore.kernel.org/lkml/CABXGCsN9mYmBD-4GaaeW_NrDu+FDXLzr_6x+XNxfmFV6QkYCDg@mail.gmail.com/ Reported-and-bisected-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Suggested-by: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "x86 bugfix patches and one compilation fix for ARM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64/sve: Fix vq_present() macro to yield a bool KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC KVM: nVMX: Change KVM_STATE_NESTED_EVMCS to signal vmcs12 is copied from eVMCS KVM: nVMX: Allow restore nested-state to enable eVMCS when vCPU in SMM KVM: x86: degrade WARN to pr_warn_ratelimited
2019-07-05Merge tag 'mtd/fixes-for-5.2-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtf fixes from Miquel Raynal: - Fix the memory organization structure of a Macronix SPI-NAND chip. - Fix a build dependency wrongly described. - Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the faulty commit introducing broken DMA support and (b) applying another commit bringing working DMA support. * tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support" mtd: rawnand: ingenic: Fix ingenic_ecc dependency mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg
2019-07-05Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixlet from Wolfram Sang: "I2C has a MAINTAINERS update which will be benfitial for developers, so let's add it right away" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Add Dmitry as a reviewer
2019-07-05Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Two more quick bugfixes for nfsd: fixing a regression causing mount failures on high-memory machines and fixing the DRC over RDMA" * tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux: nfsd: Fix overflow causing non-working mounts on 1 TB machines svcrdma: Ignore source port when computing DRC hash
2019-07-05Merge branch 'mlx5-TLS-TX-HW-offload-support'David S. Miller
Tariq Toukan says: ==================== mlx5 TLS TX HW offload support This series from Eran and me, adds TLS TX HW offload support to the mlx5 driver. This offloads the kTLS encryption process from kernel to the Mellanox NIC, saving CPU cycles and improving utilization. Upon a new TLS connection request, driver is responsible to create a dedicated HW context and configure it according to the crypto info, so HW can do the encryption itself. When the HW context gets out-of-sync (i.e. due to packets retransmission), driver is responsible for the re-sync process. This is done by posting special resync descriptors to the HW. Feature is supported on Mellanox Connect-X 6DX, and newer. Series was tested on SimX simulator. Series generated against net-next commit [1], with Saeed's request pulled [2]: [1] c4cde5804d51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next [2] git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-updates-2019-07-04-v2 Changes from last pull request: Fixed comments from Jakub: Patch 4: - Replace zero memset with a call to memzero_explicit(). Patch 11: - Fix stats counters names. - Drop TLS SKB with non-matching netdev. ==================== Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Add kTLS TX HW offload supportTariq Toukan
Add support for transmit side kernel-TLS acceleration. Offload the crypto encryption to HW. Per TLS connection: - Use a separate TIS to maintain the HW context. - Use a separate encryption key. - Maintain static and progress HW contexts by posting the proper WQEs at creation time, or upon resync. - Use a special DUMP opcode to replay the previous frags and sync the HW context. To make sure the SQ is able to serve an xmit request, increase SQ stop room to cover: - static params WQE, - progress params WQE, and - resync DUMP per frag. Currently supporting TLS 1.2, and key size 128bit. Tested over SimX simulator. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Introduce a fenced NOP WQE posting functionTariq Toukan
Similar to the existing mlx5e_post_nop(), but marks a fence in the WQE control segment. Added as a separate new function to not hurt the performance of the common case. To be used in a downstream patch of the series. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Re-work TIS creation functionsTariq Toukan
Let the EN TIS creation function (mlx5e_create_tis) be responsible for applying common mdev related fields. Other specific fields must be set by the caller and passed within the inbox. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Unconstify SQ stop roomTariq Toukan
Use an SQ field for stop_room, and use the larger value only if TLS is supported. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBBEran Ben Elisha
When polling a CQE of an SKB-less WQE, don't assume it consumed only one WQEBB. Use wi->num_wqebbs directly instead. In the downstream patch, SKB-less WQEs might have more the one WQEBB, thus this change is needed. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Make SQ WQE fetch function type genericTariq Toukan
Change mlx5e_sq_fetch_wqe to be agnostic to the Work Queue Element (WQE) type. Before this patch, it was specific for struct mlx5e_tx_wqe. In order to allow the change, the function now returns the generic void pointer, and gets the WQE size to do the zero memset. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Enforce L4 inline copy when neededTariq Toukan
When ctrl->tisn field exists, this indicates an operation (HW offload) on the TCP payload. For such WQEs, inline the headers up to L4. This is in preparation for kTLS HW offload support, added in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Move helper functions to a new txrx datapath headerTariq Toukan
Take datapath helper functions to a new header file en/txrx.h. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Accel, Add core TLS support for the Connect-X familyTariq Toukan
Add support for the new TLS implementation of the Connect-X family. Introduce a new compilation flag MLX5_TLS for it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Add crypto library to support create/destroy encryption keyTariq Toukan
Encryption key create / destroy is done via CREATE_GENERAL_OBJECT / DESTROY_GENERAL_OBJECT commands. To be used in downstream patches by TLS API wrappers, to configure the TIS context with the encryption key. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Kconfig, Better organize compilation flagsTariq Toukan
Always contain all acceleration functions declarations in 'accel' files, independent to the flags setting. For this, introduce new flags CONFIG_FPGA_{IPSEC/TLS} and use stubs where needed. This obsoletes the need for stubs in 'fpga' files. Remove them. Also use the new flags in Makefile, to decide whether to compile TLS-specific or IPSEC-specific objects, or not. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5: Accel, Expose accel wrapper for IPsec FPGA functionTariq Toukan
Do not directly call fpga version of IPsec function from main.c. Wrap it by an accel version, and call the wrapper. This will allow deprecating the FPGA IPsec stubs in downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge tag 'mlx5-updates-2019-07-04-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-update-2019-07-04 This series adds mlx5 support for devlink fw versions query. 1) Implement the required low level firmware commands 2) Implement the devlink knobs and callbacks for fw versions query. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05ipv4: Fix NULL pointer dereference in ipv4_neigh_lookup()Ido Schimmel
Both ip_neigh_gw4() and ip_neigh_gw6() can return either a valid pointer or an error pointer, but the code currently checks that the pointer is not NULL. Fix this by checking that the pointer is not an error pointer, as this can result in a NULL pointer dereference [1]. Specifically, I believe that what happened is that ip_neigh_gw4() returned '-EINVAL' (0xffffffffffffffea) to which the offset of 'refcnt' (0x70) was added, which resulted in the address 0x000000000000005a. [1] BUG: KASAN: null-ptr-deref in refcount_inc_not_zero_checked+0x6e/0x180 Read of size 4 at addr 000000000000005a by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.2.0-rc6-custom-reg-179657-gaa32d89 #396 Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 Call Trace: <IRQ> dump_stack+0x73/0xbb __kasan_report+0x188/0x1ea kasan_report+0xe/0x20 refcount_inc_not_zero_checked+0x6e/0x180 ipv4_neigh_lookup+0x365/0x12c0 __neigh_update+0x1467/0x22f0 arp_process.constprop.6+0x82e/0x1f00 __netif_receive_skb_one_core+0xee/0x170 process_backlog+0xe3/0x640 net_rx_action+0x755/0xd90 __do_softirq+0x29b/0xae7 irq_exit+0x177/0x1c0 smp_apic_timer_interrupt+0x164/0x5e0 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 5c9f7c1dfc2e ("ipv4: Add helpers for neigh lookup for nexthop") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05nfp: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: netsec: Sync dma for device on buffer allocationIlias Apalodimas
Quoting Arnd, We have to do a sync_single_for_device /somewhere/ before the buffer is given to the device. On a non-cache-coherent machine with a write-back cache, there may be dirty cache lines that get written back after the device DMA's data into it (e.g. from a previous memset from before the buffer got freed), so you absolutely need to flush any dirty cache lines on it first. Since the coherency is configurable in this device make sure we cover all configurations by explicitly syncing the allocated buffer for the device before refilling it's descriptors Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: some cleanups & bugfixes This patch-set includes cleanups and bugfixes for the HNS3 ethernet controller driver. [patch 1/9] fixes VF's broadcast promisc mode not enabled after initializing. [patch 2/9] adds hints for fibre port not support flow control. [patch 3/9] fixes a port capbility updating issue. [patch 4/9 - 9/9] adds some cleanups for HNS3 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: set maximum length to resp_data_len for exceptional casePeng Li
If HCLGE_MBX_MAX_RESP_DATA_SIZE > HCLGE_MBX_MAX_RESP_DATA_SIZE, the memcpy will cause out of memory. So this patch just set resp_data_len to the maximum length for this case. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: bitwise operator should use unsigned typeYonglong Liu
There are some bitwise operator used signed type, this patch fixes them with unsigned type. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: add default value for tc_size and tc_offsetPeng Li
This patch adds default value for tc_size and tc_offset, or it may get random value and used later. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: check msg_data before memcpy in hclgevf_send_mbx_msgWeihang Li
The value of msg_data may be NULL in some cases, which will cause errors reported by some compiler. So this patch adds a check to fix it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: set default value for param "type" in hclgevf_bind_ring_to_vectorPeng Li
The value of param type is always not changed in hclgevf_bind_ring_to_vector, move the assignment to front of "for {}" can reduce the redundant assignment. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: add all IMP return codePeng Li
Currently, the HNS3 driver just defines part of IMP return code, This patch supplements all the remaining IMP return code, and adds a function to convert this code to the error number. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix port capbility updating issueJian Shen
Currently, the driver queries the media port information, and updates the port capability periodically. But it sets an error mac->speed_type value, which stops update port capability. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: fix flow control configure issue for fibre portJian Shen
Flow control autoneg is unsupported for fibre port. It takes no effect for flow control when restart autoneg. This patch fixes it, return -EOPNOTSUPP when user tries to enable flow control autoneg. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: hns3: enable broadcast promisc mode when initializing VFJian Shen
For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: remove unused parameter from skb_checksum_try_convertLi RongQing
the check parameter is never used Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05Merge branch 'mlxsw-Enable-disable-PTP-shapers'David S. Miller
Ido Schimmel says: ==================== mlxsw: Enable/disable PTP shapers Shalom says: In order to get more accurate hardware time stamping in Spectrum-1, the driver needs to apply a shaper on the port for speeds lower than 40Gbps. This shaper is called a PTP shaper and it is applied on hierarchy 0, which is the port hierarchy. This shaper may affect the shaper rates of all hierarchies. This patchset adds the ability to enable or disable the PTP shaper on the port in two scenarios: 1. When the user wants to enable/disable the hardware time stamping 2. When the port is brought up or down (including port speed change) Patch #1 adds the QEEC.ptps field that is used for enabling or disabling the PTP shaper on a port. Patch #2 adds a note about disabling the PTP shaper when calling to mlxsw_sp_port_ets_maxrate_set(). Patch #3 adds the QPSC register that is responsible for configuring the PTP shaper parameters per speed. Patch #4 sets the PTP shaper parameters during the ptp_init(). Patch #5 adds new operation for getting the port's speed. Patch #6 enables/disables the PTP shaper when turning on or off the hardware time stamping. Patch #7 enables/disables the PTP shaper when the port's status has changed (including port speed change). Patch #8 applies the PTP shaper enable/disable logic by filling the PTP shaper parameters array. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Apply the PTP shaper enable/disable logicShalom Toledo
Apply by filling the PTP shaper parameters array. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Set up PTP shaper when port status has changedShalom Toledo
When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Enable/disable PTP shaper on a port when getting ↵Shalom Toledo
HWTSTAMP on/off In order to get more accurate hardware time stamping, the driver needs to enable PTP shaper on the port, for speeds lower than 40 Gbps. Enable the PTP shaper on the port when the user turns on the hardware time stamping, and disable it when the user turns off the hardware time stamping. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Add new operation for getting the port's speedShalom Toledo
New operation for getting the port's speed as part of port-type-speed operations. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum_ptp: Set the PTP shaper parametersShalom Toledo
Set the PTP shaper parameters during the ptp_init(). For different speeds, there are different parameters. When the port's speed changes and PTP shaper is enabled, the firmware changes the ETS shaper values according to the PTP shaper parameters for this new speed. The PTP shaper parameters array is left empty for now, will be filled in a follow-up patch. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 17:33:11 +0000