summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-03ASoC: meson: axg-tdm-formatter: add resetJerome Brunet
Add the optional reset line handling which is present on the new SoC families, such as the g12a. Triggering this reset is not critical but it helps solve a channel shift issue on the g12a. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190703120749.32341-3-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03ASoC: meson: axg-tdm-formatter: add reset to the bindings documentationJerome Brunet
Add an optional reset property to the tdm formatter bindings. The dedicated reset line is present on some SoC families, such as the g12a. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190703120749.32341-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03keys: Provide KEYCTL_GRANT_PERMISSIONDavid Howells
Provide a keyctl() operation to grant/remove permissions. The grant operation, wrapped by libkeyutils, looks like: int ret = keyctl_grant_permission(key_serial_t key, enum key_ace_subject_type type, unsigned int subject, unsigned int perm); Where key is the key to be modified, type and subject represent the subject to which permission is to be granted (or removed) and perm is the set of permissions to be granted. 0 is returned on success. SET_SECURITY permission is required for this. The subject type currently must be KEY_ACE_SUBJ_STANDARD for the moment (other subject types will come along later). For subject type KEY_ACE_SUBJ_STANDARD, the following subject values are available: KEY_ACE_POSSESSOR The possessor of the key KEY_ACE_OWNER The owner of the key KEY_ACE_GROUP The key's group KEY_ACE_EVERYONE Everyone perm lists the permissions to be granted: KEY_ACE_VIEW Can view the key metadata KEY_ACE_READ Can read the key content KEY_ACE_WRITE Can update/modify the key content KEY_ACE_SEARCH Can find the key by searching/requesting KEY_ACE_LINK Can make a link to the key KEY_ACE_SET_SECURITY Can set security KEY_ACE_INVAL Can invalidate KEY_ACE_REVOKE Can revoke KEY_ACE_JOIN Can join this keyring KEY_ACE_CLEAR Can clear this keyring If an ACE already exists for the subject, then the permissions mask will be overwritten; if perm is 0, it will be deleted. Currently, the internal ACL is limited to a maximum of 16 entries. For example: int ret = keyctl_grant_permission(key, KEY_ACE_SUBJ_STANDARD, KEY_ACE_OWNER, KEY_ACE_VIEW | KEY_ACE_READ); Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-03spi: pxa2xx: Add support for Intel Elkhart LakeJarkko Nikula
Intel Elkhart Lake has the same LPSS than Intel Broxton. Add support for it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190703114603.22301-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03regulator: max77650: add MODULE_ALIAS()Bartosz Golaszewski
Define a MODULE_ALIAS() in the regulator sub-driver for max77650 so that the appropriate module gets loaded together with the core mfd driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190703084849.9668-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03regulator: max77620: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190703082009.18779-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-03Documentation: ABI: power: Add missing newline at end of fileGeert Uytterhoeven
"git diff" says: \ No newline at end of file after modifying the files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03ACPI / PMIC: intel: Drop double removal of address space handlerAndy Shevchenko
There is no need to remove address space handler twice, because removal is idempotent. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03ACPI: APD: remove redundant assignment to pointer clkColin Ian King
The pointer clk is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03docs: extcon: convert it to ReST and move to ACPI dirMauro Carvalho Chehab
The intel-int3496.txt file is a documentation for an ACPI driver. There's no reason to keep it on a separate directory. So, instead of keeping it on some random location, move it to a sub-directory inside the ACPI documentation dir, renaming it to .rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03bpf, libbpf, smatch: Fix potential NULL pointer dereferenceLeo Yan
Based on the following report from Smatch, fix the potential NULL pointer dereference check: tools/lib/bpf/libbpf.c:3493 bpf_prog_load_xattr() warn: variable dereferenced before check 'attr' (see line 3483) 3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, 3480 struct bpf_object **pobj, int *prog_fd) 3481 { 3482 struct bpf_object_open_attr open_attr = { 3483 .file = attr->file, 3484 .prog_type = attr->prog_type, ^^^^^^ 3485 }; At the head of function, it directly access 'attr' without checking if it's NULL pointer. This patch moves the values assignment after validating 'attr' and 'attr->file'. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03libbpf: fix GCC8 warning for strncpyAndrii Nakryiko
GCC8 started emitting warning about using strncpy with number of bytes exactly equal destination size, which is generally unsafe, as can lead to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number of bytes to ensure name is always zero-terminated. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03Merge tag 'irqchip-5.3' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for Linux 5.3 from Marc Zyngier: - ACPI support for the exiu and mb86s7x drivers - New Renesas RZ/A1, Amazon al-fic drivers - Add quirk for Amazon Graviton GICv2m widget - Large Renesas driver cleanup - CSky mpintc trigger type fixes - Meson G12A driver support - Various minor cleanups
2019-07-03selftests: bpf: add tests for shifts by zeroLuke Nelson
There are currently no tests for ALU64 shift operations when the shift amount is 0. This adds 6 new tests to make sure they are equivalent to a no-op. The x32 JIT had such bugs that could have been caught by these tests. Cc: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf, x32: Fix bug with ALU64 {LSH, RSH, ARSH} BPF_K shift by 0Luke Nelson
The current x32 BPF JIT does not correctly compile shift operations when the immediate shift amount is 0. The expected behavior is for this to be a no-op. The following program demonstrates the bug. The expexceted result is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r1 <<= 0 if r1 == 1 goto end r0 = 2 end: exit This patch simplifies the code and fixes the bug. Fixes: 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf, x32: Fix bug with ALU64 {LSH, RSH, ARSH} BPF_X shift by 0Luke Nelson
The current x32 BPF JIT for shift operations is not correct when the shift amount in a register is 0. The expected behavior is a no-op, whereas the current implementation changes bits in the destination register. The following example demonstrates the bug. The expected result of this program is 1, but the current JITed code returns 2. r0 = 1 r1 = 1 r2 = 0 r1 <<= r2 if r1 == 1 goto end r0 = 2 end: exit The bug is caused by an incorrect assumption by the JIT that a shift by 32 clear the register. On x32 however, shifts use the lower 5 bits of the source, making a shift by 32 equivalent to a shift by 0. This patch fixes the bug using double-precision shifts, which also simplifies the code. Fixes: 03f5781be2c7 ("bpf, x86_32: add eBPF JIT compiler for ia32") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03bpf: fix precision trackingAlexei Starovoitov
When equivalent state is found the current state needs to propagate precision marks. Otherwise the verifier will prune the search incorrectly. There is a price for correctness: before before broken fixed cnst spill precise precise bpf_lb-DLB_L3.o 1923 8128 1863 1898 bpf_lb-DLB_L4.o 3077 6707 2468 2666 bpf_lb-DUNKNOWN.o 1062 1062 544 544 bpf_lxc-DDROP_ALL.o 166729 380712 22629 36823 bpf_lxc-DUNKNOWN.o 174607 440652 28805 45325 bpf_netdev.o 8407 31904 6801 7002 bpf_overlay.o 5420 23569 4754 4858 bpf_lxc_jit.o 39389 359445 50925 69631 Overall precision tracking is still very effective. Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Tested-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-03clocksource/drivers: Continue making Hyper-V clocksource ISA agnosticMichael Kelley
Continue consolidating Hyper-V clock and timer code into an ISA independent Hyper-V clocksource driver. Move the existing clocksource code under drivers/hv and arch/x86 to the new clocksource driver while separating out the ISA dependencies. Update Hyper-V initialization to call initialization and cleanup routines since the Hyper-V synthetic clock is not independently enumerated in ACPI. Update Hyper-V clocksource users in KVM and VDSO to get definitions from the new include file. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-3-git-send-email-mikelley@microsoft.com
2019-07-03clocksource/drivers: Make Hyper-V clocksource ISA agnosticMichael Kelley
Hyper-V clock/timer code and data structures are currently mixed in with other code in the ISA independent drivers/hv directory as well as the ISA dependent Hyper-V code under arch/x86. Consolidate this code and data structures into a Hyper-V clocksource driver to better follow the Linux model. In doing so, separate out the ISA dependent portions so the new clocksource driver works for x86 and for the in-process Hyper-V on ARM64 code. To start, move the existing clockevents code to create the new clocksource driver. Update the VMbus driver to call initialization and cleanup routines since the Hyper-V synthetic timers are not independently enumerated in ACPI. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
2019-07-03xfrm interface: fix memory leak on creationNicolas Dichtel
The following commands produce a backtrace and return an error but the xfrm interface is created (in the wrong netns): $ ip netns add foo $ ip netns add bar $ ip -n foo netns set bar 0 $ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23 RTNETLINK answers: Invalid argument $ ip -n bar link ls xfrmi0 2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 Here is the backtrace: [ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1 [ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$ eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy [ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106 [ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1 [ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66 [ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246 [ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710 [ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710 [ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0 [ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770 [ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea [ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 [ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0 [ 79.896137] Call Trace: [ 79.896464] unregister_netdevice_many+0x12/0x6c [ 79.896998] __rtnl_newlink+0x6e2/0x73b [ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185 [ 79.898039] ? pskb_expand_head+0x5f/0x1fe [ 79.898556] ? stack_access_ok+0xd/0x2c [ 79.899009] ? deref_stack_reg+0x12/0x20 [ 79.899462] ? stack_access_ok+0xd/0x2c [ 79.899927] ? stack_access_ok+0xd/0x2c [ 79.900404] ? __module_text_address+0x9/0x4f [ 79.900910] ? is_bpf_text_address+0x5/0xc [ 79.901390] ? kernel_text_address+0x67/0x7b [ 79.901884] ? __kernel_text_address+0x1a/0x25 [ 79.902397] ? unwind_get_return_address+0x12/0x23 [ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77 [ 79.903772] rtnl_newlink+0x43/0x56 [ 79.904217] rtnetlink_rcv_msg+0x200/0x24c In fact, each time a xfrm interface was created, a netdev was allocated by __rtnl_newlink()/rtnl_create_link() and then another one by xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's why the previous commands produce a backtrace: dev_change_net_namespace() was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the first one). CC: Lorenzo Colitti <lorenzo@google.com> CC: Benedict Wong <benedictwong@google.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Shannon Nelson <shannon.nelson@oracle.com> CC: Antony Antony <antony@phenome.org> CC: Eyal Birger <eyal.birger@gmail.com> Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-03xfrm: policy: fix bydst hlist corruption on hash rebuildFlorian Westphal
syzbot reported following spat: BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221 BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455 BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066 Workqueue: events xfrm_hash_rebuild Call Trace: __write_once_size include/linux/compiler.h:221 [inline] hlist_del_rcu include/linux/rculist.h:455 [inline] xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 process_one_work+0x814/0x1130 kernel/workqueue.c:2269 Allocated by task 8064: __kmalloc+0x23c/0x310 mm/slab.c:3669 kzalloc include/linux/slab.h:742 [inline] xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21 xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline] xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120 ops_init+0x336/0x420 net/core/net_namespace.c:130 setup_net+0x212/0x690 net/core/net_namespace.c:316 The faulting address is the address of the old chain head, free'd by xfrm_hash_resize(). In xfrm_hash_rehash(), chain heads get re-initialized without any hlist_del_rcu: for (i = hmask; i >= 0; i--) INIT_HLIST_HEAD(odst + i); Then, hlist_del_rcu() gets called on the about to-be-reinserted policy when iterating the per-net list of policies. hlist_del_rcu() will then make chain->first be nonzero again: static inline void __hlist_del(struct hlist_node *n) { struct hlist_node *next = n->next; // address of next element in list struct hlist_node **pprev = n->pprev;// location of previous elem, this // can point at chain->first WRITE_ONCE(*pprev, next); // chain->first points to next elem if (next) next->pprev = pprev; Then, when we walk chainlist to find insertion point, we may find a non-empty list even though we're supposedly reinserting the first policy to an empty chain. To fix this first unlink all exact and inexact policies instead of zeroing the list heads. Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh, without fix KASAN catches the corruption as it happens, SLUB poisoning detects it a bit later. Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com Fixes: 1548bc4e0512 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner
so the hyper-v clocksource update can be applied.
2019-07-03irqchip/gic-pm: Remove PM_CLK dependencySameer Pujar
gic-pm driver does not use pm-clk interface now and hence the dependency is removed from Kconfig. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-03gpio: altera: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Ley Foon Tan <lftan@altera.com> Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Use devm_ managed gpiochipLinus Walleij
By using devm_gpiochip_add_data() we can get rid of the remove() callback. As this driver doesn't use the gpiochip data pointer we simply pass in NULL. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Add struct device *dev helper variableLinus Walleij
This makes the code easier to read. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03gpio: siox: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt ↵Talel Shenhar
Controller Driver The Amazon's Annapurna Labs Fabric Interrupt Controller has 32 inputs. A FIC (Fabric Interrupt Controller) may be cascaded into another FIC or directly to the main CPU Interrupt Controller (e.g. GIC). Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-03dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FICTalel Shenhar
Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-03x86/irq: Seperate unused system vectors from spurious entry againThomas Gleixner
Quite some time ago the interrupt entry stubs for unused vectors in the system vector range got removed and directly mapped to the spurious interrupt vector entry point. Sounds reasonable, but it's subtly broken. The spurious interrupt vector entry point pushes vector number 0xFF on the stack which makes the whole logic in __smp_spurious_interrupt() pointless. As a consequence any spurious interrupt which comes from a vector != 0xFF is treated as a real spurious interrupt (vector 0xFF) and not acknowledged. That subsequently stalls all interrupt vectors of equal and lower priority, which brings the system to a grinding halt. This can happen because even on 64-bit the system vector space is not guaranteed to be fully populated. A full compile time handling of the unused vectors is not possible because quite some of them are conditonally populated at runtime. Bring the entry stubs back, which wastes 160 bytes if all stubs are unused, but gains the proper handling back. There is no point to selectively spare some of the stubs which are known at compile time as the required code in the IDT management would be way larger and convoluted. Do not route the spurious entries through common_interrupt and do_IRQ() as the original code did. Route it to smp_spurious_interrupt() which evaluates the vector number and acts accordingly now that the real vector numbers are handed in. Fixup the pr_warn so the actual spurious vector (0xff) is clearly distiguished from the other vectors and also note for the vectored case whether it was pending in the ISR or not. "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen." "Spurious interrupt vector 0xed on CPU#1. Acked." "Spurious interrupt vector 0xee on CPU#1. Not pending!." Fixes: 2414e021ac8d ("x86: Avoid building unused IRQ entry stubs") Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jan Beulich <jbeulich@suse.com> Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de
2019-07-03x86/irq: Handle spurious interrupt after shutdown gracefullyThomas Gleixner
Since the rework of the vector management, warnings about spurious interrupts have been reported. Robert provided some more information and did an initial analysis. The following situation leads to these warnings: CPU 0 CPU 1 IO_APIC interrupt is raised sent to CPU1 Unable to handle immediately (interrupts off, deep idle delay) mask() ... free() shutdown() synchronize_irq() clear_vector() do_IRQ() -> vector is clear Before the rework the vector entries of legacy interrupts were statically assigned and occupied precious vector space while most of them were unused. Due to that the above situation was handled silently because the vector was handled and the core handler of the assigned interrupt descriptor noticed that it is shut down and returned. While this has been usually observed with legacy interrupts, this situation is not limited to them. Any other interrupt source, e.g. MSI, can cause the same issue. After adding proper synchronization for level triggered interrupts, this can only happen for edge triggered interrupts where the IO-APIC obviously cannot provide information about interrupts in flight. While the spurious warning is actually harmless in this case it worries users and driver developers. Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead of VECTOR_UNUSED when the vector is freed up. If that above late handling happens the spurious detector will not complain and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on that line will trigger the spurious warning as before. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>- Tested-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de
2019-07-03x86/ioapic: Implement irq_get_irqchip_state() callbackThomas Gleixner
When an interrupt is shut down in free_irq() there might be an inflight interrupt pending in the IO-APIC remote IRR which is not yet serviced. That means the interrupt has been sent to the target CPUs local APIC, but the target CPU is in a state which delays the servicing. So free_irq() would proceed to free resources and to clear the vector because synchronize_hardirq() does not see an interrupt handler in progress. That can trigger a spurious interrupt warning, which is harmless and just confuses users, but it also can leave the remote IRR in a stale state because once the handler is invoked the interrupt resources might be freed already and therefore acknowledgement is not possible anymore. Implement the irq_get_irqchip_state() callback for the IO-APIC irq chip. The callback is invoked from free_irq() via __synchronize_hardirq(). Check the remote IRR bit of the interrupt and return 'in flight' if it is set and the interrupt is configured in level mode. For edge mode the remote IRR has no meaning. As this is only meaningful for level triggered interrupts this won't cure the potential spurious interrupt warning for edge triggered interrupts, but the edge trigger case does not result in stale hardware state. This has to be addressed at the vector/interrupt entry level seperately. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.370295517@linutronix.de
2019-07-03genirq: Add optional hardware synchronization for shutdownThomas Gleixner
free_irq() ensures that no hardware interrupt handler is executing on a different CPU before actually releasing resources and deactivating the interrupt completely in a domain hierarchy. But that does not catch the case where the interrupt is on flight at the hardware level but not yet serviced by the target CPU. That creates an interesing race condition: CPU 0 CPU 1 IRQ CHIP interrupt is raised sent to CPU1 Unable to handle immediately (interrupts off, deep idle delay) mask() ... free() shutdown() synchronize_irq() release_resources() do_IRQ() -> resources are not available That might be harmless and just trigger a spurious interrupt warning, but some interrupt chips might get into a wedged state. Utilize the existing irq_get_irqchip_state() callback for the synchronization in free_irq(). synchronize_hardirq() is not using this mechanism as it might actually deadlock unter certain conditions, e.g. when called with interrupts disabled and the target CPU is the one on which the synchronization is invoked. synchronize_irq() uses it because that function cannot be called from non preemtible contexts as it might sleep. No functional change intended and according to Marc the existing GIC implementations where the driver supports the callback should be able to cope with that core change. Famous last words. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
2019-07-03genirq: Fix misleading synchronize_irq() documentationThomas Gleixner
The function might sleep, so it cannot be called from interrupt context. Not even with care. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
2019-07-03genirq: Delay deactivation in free_irq()Thomas Gleixner
When interrupts are shutdown, they are immediately deactivated in the irqdomain hierarchy. While this looks obviously correct there is a subtle issue: There might be an interrupt in flight when free_irq() is invoking the shutdown. This is properly handled at the irq descriptor / primary handler level, but the deactivation might completely disable resources which are required to acknowledge the interrupt. Split the shutdown code and deactivate the interrupt after synchronization in free_irq(). Fixup all other usage sites where this is not an issue to invoke the combined shutdown_and_deactivate() function instead. This still might be an issue if the interrupt in flight servicing is delayed on a remote CPU beyond the invocation of synchronize_irq(), but that cannot be handled at that level and needs to be handled in the synchronize_irq() context. Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
2019-07-03drivers: gpio: amd-fch: make resource struct constEnrico Weigelt
The struct resource field is statically initialized and may never change. Therefore make it const. Signed-off-by: Enrico Weigelt <info@metux.net> Link: https://lore.kernel.org/r/1560787211-15443-1-git-send-email-info@metux.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03Bluetooth: Fix faulty expression for minimum encryption key size checkMatias Karhumaa
Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is also allowed as stated in the comment. This bug caused connection problems with devices having maximum encryption key size of 7 octets (56-bit). Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997 Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-03devres: allow const resource argumentsArnd Bergmann
devm_ioremap_resource() does not currently take 'const' arguments, which results in a warning from the first driver trying to do it anyway: drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe': drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores); ^~~~~~~~~~~~~~~~~~~ Change the prototype to allow it, as there is no real reason not to. Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviwed-By: Enrico Weigelt <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03Merge tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fix from Steve French: "SMB3 fix (for stable as well) for crash mishandling one of the Windows reparse point symlink tags" * tag '5.2-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix crash querying symlinks stored as reparse-points
2019-07-03Merge tag 'for-linus-20190701' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd fork() fix from Christian Brauner: "A single small fix for copy_process() in kernel/fork.c: With Al's removal of ksys_close() from cleanup paths in copy_process() a bug was introduced. When anon_inode_getfile() failed the cleanup was correctly performed but the error code was not propagated to callers of copy_process() causing them to operate on a nonsensical pointer. The fix is a simple on-liner which makes sure that a proper negative error code is returned from copy_process(). syzkaller has also verified that the bug is not reproducible with this fix" * tag 'for-linus-20190701' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: return proper negative error code
2019-07-03Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Fix a build failure with the LLVM linker and a module allocation failure when KASLR is active: - Fix module allocation when running with KASLR enabled - Fix broken build due to bug in LLVM linker (ld.lld)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitly arm64: kaslr: keep modules inside module region when KASAN is enabled
2019-07-03stacktrace: Use PF_KTHREAD to check for kernel threadsThomas Gleixner
!current->mm is not a reliable indicator for kernel threads as they might temporarily use a user mm. Check for PF_KTHREAD instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021750100.1802@nanos.tec.linutronix.de
2019-07-03gfs2: remove the unused gfs2_stuffed_write_end functionChristoph Hellwig
This function was overlooked when the write_begin and write_end address space operations were removed as part of gfs2's iomap conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03gfs2: use page_offset in gfs2_page_mkwriteChristoph Hellwig
Without casting page->index to a guaranteed 64-bit type, the value might be treated as 32-bit on 32-bit platforms and thus get truncated. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-07-03perf script: Allow specifying the files to process guest samplesArnaldo Carvalho de Melo
The 'perf kvm' command set up things so that we can record, report, top, etc, but not 'script', so make 'perf script' be able to process samples by allowing to pass guest kallsyms, vmlinux, modules, etc, and if at least one of those is provided, set perf_guest to true so that guest samples get properly resolved. Testing it: # perf kvm --guest --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules record -e cycles:Gk ^C[ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 3.602 MB perf.data.guest (10492 samples) ] # # perf evlist -i perf.data.guest cycles:Gk # perf evlist -v -i perf.data.guest cycles:Gk: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_host: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # # perf kvm --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules report --stdio -s sym | head -30 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 10K of event 'cycles:Gk' # Event count (approx.): 2434201408 # # Overhead Symbol # ........ .............................................. # 11.93% [g] avtab_search_node 3.95% [g] sidtab_context_to_sid 2.41% [g] n_tty_write 2.20% [g] _spin_unlock_irqrestore 1.37% [g] _aesni_dec4 1.33% [g] kmem_cache_alloc 1.07% [g] native_write_cr0 0.99% [g] kfree 0.95% [g] _spin_lock 0.91% [g] __memset 0.87% [g] schedule 0.83% [g] _spin_lock_irqsave 0.76% [g] __kmalloc 0.67% [g] avc_has_perm_noaudit 0.66% [g] kmem_cache_free 0.65% [g] glue_xts_crypt_128bit 0.59% [g] __d_lookup 0.59% [g] __audit_syscall_exit 0.56% [g] __memcpy # Then, when trying to use perf script to generate a python script and then process the events after adding a python hook for non-tracepoint events: # perf script -i perf.data.guest -g python generated Python script: perf-script.py # vim perf-script.py # tail -2 perf-script.py def process_event(param_dict): print(param_dict["symbol"]) # # perf script -i perf.data.guest -s perf-script.py | head in trace_begin vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit vmx_vmexit 231 # We'd see just the vmx_vmexit, i.e. the samples from the guest don't show up. After this patch: # perf script --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules -i perf.data.guest -s perf-script.py 2> /dev/null | head -30 in trace_begin apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt save_args do_timer drain_array inode_permission avc_has_perm_noaudit run_timer_softirq apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt apic_timer_interrupt kvm_guest_apic_eoi_write run_posix_cpu_timers _spin_lock handle_pte_fault rcu_irq_enter delay_tsc delay_tsc native_read_tsc apic_timer_interrupt sys_open internal_add_timer list_del rcu_exit_nohz # Jiri Olsa noticed we need to set 'perf_guest' to true if we want to process guest samples and I made it be set if one of the guest files settings get set via the command line options added in this patch, that match those present in the 'perf kvm' command. We probably want to have 'perf record', 'perf report' etc to notice that there are guest samples and do the right thing, which is to look for files with some suffix that make it be associated with the guest used to collect the samples, i.e. if a vmlinux file is passed, we can get the build-id from it, if not some other identifier or simply looking for "kallsyms.guest", for instance, in the current directory. Reported-by: Mariano Pache <npache@redhat.com> Tested-by: Mariano Pache <npache@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: Ali Raza <alirazabhutta.10@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Mario <jmario@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Orran Krieger <okrieger@redhat.com> Cc: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Yunlong Song <yunlong.song@huawei.com> Link: https://lkml.kernel.org/n/tip-d54gj64rerlxcqsrod05biwn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-02blk-mq: simplify blk_mq_make_request()Bart Van Assche
Move the blk_mq_bio_to_request() call in front of the if-statement. Cc: Hannes Reinecke <hare@suse.com> Cc: Omar Sandoval <osandov@fb.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-02blk-mq: remove blk_mq_put_ctx()Bart Van Assche
No code that occurs between blk_mq_get_ctx() and blk_mq_put_ctx() depends on preemption being disabled for its correctness. Since removing the CPU preemption calls does not measurably affect performance, simplify the blk-mq code by removing the blk_mq_put_ctx() function and also by not disabling preemption in blk_mq_get_ctx(). Cc: Hannes Reinecke <hare@suse.com> Cc: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-02selftests/net: skip psock_tpacket test if KALLSYMS was not enabledPo-Hsu Lin
The psock_tpacket test will need to access /proc/kallsyms, this would require the kernel config CONFIG_KALLSYMS to be enabled first. Apart from adding CONFIG_KALLSYMS to the net/config file here, check the file existence to determine if we can run this test will be helpful to avoid a false-positive test result when testing it directly with the following commad against a kernel that have CONFIG_KALLSYMS disabled: make -C tools/testing/selftests TARGETS=net run_tests Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02mlxsw: spectrum_ptp: Fix validation in mlxsw_sp1_ptp_packet_finish()Petr Machata
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates whether the corresponding port is still valid. However the condition is incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to compare it to skb->dev. The condition needs to check whether the port is present and skb->dev still refers to that port (or else is NULL). If that does not hold, bail out. Add a pair of parentheses to fix the condition. Fixes: d92e4e6e33c8 ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02rxrpc: Fix oops in tracepointDavid Howells
If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the trace line that rxrpc_extract_header() tries to emit when a protocol error occurs (typically because the packet is short) because the call argument is NULL. Fix this by using ?: to assume 0 as the debug_id if call is NULL. This can then be induced by: echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001 where addr has the following program running on it: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> int main(void) { struct sockaddr_rxrpc srx; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = AF_RXRPC; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = sizeof(srx.transport.sin); srx.transport.sin.sin_family = AF_INET; srx.transport.sin.sin_port = htons(0x4e21); fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6); bind(fd, (struct sockaddr *)&srx, sizeof(srx)); sleep(20); return 0; } It results in the following oops. BUG: kernel NULL pointer dereference, address: 0000000000000340 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac ... Call Trace: <IRQ> rxrpc_extract_header+0x86/0x171 ? rcu_read_lock_sched_held+0x5d/0x63 ? rxrpc_new_skb+0xd4/0x109 rxrpc_input_packet+0xef/0x14fc ? rxrpc_input_data+0x986/0x986 udp_queue_rcv_one_skb+0xbf/0x3d0 udp_unicast_rcv_skb.isra.8+0x64/0x71 ip_protocol_deliver_rcu+0xe4/0x1b4 ip_local_deliver+0xf0/0x154 __netif_receive_skb_one_core+0x50/0x6c netif_receive_skb_internal+0x26b/0x2e9 napi_gro_receive+0xf8/0x1da rtl8169_poll+0x303/0x4c4 net_rx_action+0x10e/0x333 __do_softirq+0x1a5/0x38f irq_exit+0x54/0xc4 do_IRQ+0xda/0xf8 common_interrupt+0xf/0xf </IRQ> ... ? cpuidle_enter_state+0x23c/0x34d cpuidle_enter+0x2a/0x36 do_idle+0x163/0x1ea cpu_startup_entry+0x1d/0x1f start_secondary+0x157/0x172 secondary_startup_64+0xa4/0xb0 Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 16:29:45 +0000