| Age | Commit message (Collapse) | Author |
|---|
|
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
Fix it.
Fixes: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
Closes: https://lore.kernel.org/lkml/352f0709-f026-cd45-e60c-60dfd97f73f3@maine.edu/
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org # v6.15+
Link: https://lore.kernel.org/r/20250612143818.2889040-1-kan.liang@linux.intel.com
|
|
The MPC8315E SoC and variants have a GPIO controller at IMMR + 0xc00.
This node was previously missing from the device tree.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250611-mpc-gpio-v1-1-02d1f75336e2@posteo.net
|
|
The standard property for the model name is called "model".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250611-microwatt-v2-1-80847bbc5f9c@posteo.net
|
|
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca2d ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
|
|
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes: 7e3a68be42e1 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1fa3453f07d42a50a70114da9905bf7b73304fca.1747073669.git.christophe.leroy@csgroup.eu
|
|
Fix the compile-time warning
drivers/gpu/drm/mgag200/mgag200_ddc.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612085308.203861-1-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/gpu/drm/ast/ast_mode.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612084257.200907-1-tzimmermann@suse.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc2:
- Fix infinite EPROBE_DEFER loop in vc4 probing.
- Fix amdxdna firmware size.
- mode fixes for meson.
- Kconfig fix for st7171-i2c.
- Fix -EBUSY WARN_ON_ONCE in dma-buf
- Use dma_sync_sgtable_for_cpu in udmabuf.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/62c06195-8bc1-4dae-8777-e86d94e4d9d9@linux.intel.com
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some stress/negative firmware testing around devcmd(s) returning
EAGAIN found that the done bit could get out of sync in the
firmware when it wasn't cleared in a retry case.
While here, change the type of the local done variable to a bool
to match the return type from ionic_dev_cmd_done().
Fixes: ec8ee714736e ("ionic: stretch heartbeat detection")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix regression disallowing 64K SVM migration (Maarten)
- Use a bounce buffer for WA BB (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aEsBQoh5Si3ouPgE@fedora
|
|
While investigating some reports of memory-constrained NUMA machines
failing to mount v3 and v4.0 nfs mounts, we found that svc_init_buffer()
was not attempting to retry allocations from the bulk page allocator.
Typically, this results in a single page allocation being returned and
the mount attempt fails with -ENOMEM. A retry would have allowed the mount
to succeed.
Additionally, it seems that the bulk allocation in svc_init_buffer() is
redundant because svc_alloc_arg() will perform the required allocation and
does the correct thing to retry the allocations.
The call to allocate memory in svc_alloc_arg() drops the preferred node
argument, but I expect we'll still allocate on the preferred node because
the allocation call happens within the svc thread context, which chooses
the node with memory closest to the current thread's execution.
This patch cleans out the bulk allocation in svc_init_buffer() to allow
svc_alloc_arg() to handle the allocation/retry logic for rq_pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: ed603bcf4fea ("sunrpc: Replace the rq_pages array with dynamically-allocated memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The new code neglects to remove a freshly-allocated RCL from the
callback's referring call list when no matching referring call is
found.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505171002.cE46sdj5-lkp@intel.com/
Fixes: 4f3c8d8c9e10 ("NFSD: Implement CB_SEQUENCE referring call lists")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
|
|
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Customer reported that one of their applications started failing to
open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server
hitting the maximum number of opens to same file that it would allow
for a single client connection.
It turned out the client was failing to reuse open handles with
deferred closes because matching ->f_flags directly without masking
off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then
client ended up with thousands of deferred closes to same file. Those
bits are already satisfied on the original open, so no need to check
them against existing open handles.
Reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#define NR_THREADS 4
#define NR_ITERATIONS 2500
#define TEST_FILE "/mnt/1/test/dir/foo"
static char buf[64];
static void *worker(void *arg)
{
int i, j;
int fd;
for (i = 0; i < NR_ITERATIONS; i++) {
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666);
for (j = 0; j < 16; j++)
write(fd, buf, sizeof(buf));
close(fd);
}
}
int main(int argc, char *argv[])
{
pthread_t t[NR_THREADS];
int fd;
int i;
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666);
close(fd);
memset(buf, 'a', sizeof(buf));
for (i = 0; i < NR_THREADS; i++)
pthread_create(&t[i], NULL, worker, NULL);
for (i = 0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
return 0;
}
Before patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1391
After patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: Pierguido Lambri <plambri@redhat.com>
Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations")
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth().
Call Trace:
[ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550
[ 97.285732]
[ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11
[ 97.287032] Hardware name: linux,dummy-virt (DT)
[ 97.287815] Call trace:
[ 97.288279] dump_backtrace+0xa0/0x128
[ 97.288946] show_stack+0x20/0x38
[ 97.289551] dump_stack_lvl+0x78/0xc8
[ 97.290203] print_address_description.constprop.0+0x84/0x3c8
[ 97.291159] print_report+0xb0/0x280
[ 97.291792] kasan_report+0x84/0xd0
[ 97.292421] __asan_load8+0x9c/0xc0
[ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8
[ 97.293835] process_fetch_insn+0x770/0xa30
[ 97.294562] kprobe_trace_func+0x254/0x3b0
[ 97.295271] kprobe_dispatcher+0x98/0xe0
[ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210
[ 97.296774] call_break_hook+0xc4/0x100
[ 97.297451] brk_handler+0x24/0x78
[ 97.298073] do_debug_exception+0xac/0x178
[ 97.298785] el1_dbg+0x70/0x90
[ 97.299344] el1h_64_sync_handler+0xcc/0xe8
[ 97.300066] el1h_64_sync+0x78/0x80
[ 97.300699] kernel_clone+0x0/0x500
[ 97.301331] __arm64_sys_clone+0x70/0x90
[ 97.302084] invoke_syscall+0x68/0x198
[ 97.302746] el0_svc_common.constprop.0+0x11c/0x150
[ 97.303569] do_el0_svc+0x38/0x50
[ 97.304164] el0_svc+0x44/0x1d8
[ 97.304749] el0t_64_sync_handler+0x100/0x130
[ 97.305500] el0t_64_sync+0x188/0x190
[ 97.306151]
[ 97.306475] The buggy address belongs to stack of task 1.sh/2550
[ 97.307461] and is located at offset 0 in frame:
[ 97.308257] __se_sys_clone+0x0/0x138
[ 97.308910]
[ 97.309241] This frame has 1 object:
[ 97.309873] [48, 184) 'args'
[ 97.309876]
[ 97.310749] The buggy address belongs to the virtual mapping at
[ 97.310749] [ffff800089270000, ffff800089279000) created by:
[ 97.310749] dup_task_struct+0xc0/0x2e8
[ 97.313347]
[ 97.313674] The buggy address belongs to the physical page:
[ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a
[ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff)
[ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000
[ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 97.319445] page dumped because: kasan: bad access detected
[ 97.320371]
[ 97.320694] Memory state around the buggy address:
[ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00
[ 97.325023] ^
[ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
Fixes: 0a8ea52c3eb1 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we call gcs_free() during flush_gcs() to reset the thread
state for GCS. This includes unmapping any kernel allocated GCS, but
this is redundant when doing a flush_thread() since we are
reinitialising the thread memory too. Inline the reinitialisation of the
thread struct.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250611-arm64-gcs-flush-thread-v1-1-cc26feeddabd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In case the BO is in iomem, we can't simply take the vaddr and write to
it. Instead, prepare a separate buffer that is later copied into io
memory. Right now it's just a few words that could be using
xe_map_write32(), but the intention is to grow the WA BB for other
uses.
Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization")
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250604-wa-bb-fix-v1-1-0dfc5dafcef0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit ef48715b2d3df17c060e23b9aa636af3d95652f8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Add some missing pins on the Qualcomm QCM2290, along with a managed
resources patch that make it clean and nice
- Drop an unused function in the ST Micro driver
- Drop bouncing MAINTAINER entry
- Drop of_match_ptr() macro to rid compile warnings in the TB10x
driver
- Fix up calculation of pin numbers from base in the Sunxi driver
* tag 'pinctrl-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin
pinctrl: tb10x: Drop of_match_ptr for ID table
pinctrl: MAINTAINERS: Drop bouncing Jianlong Huang
pinctrl: st: Drop unused st_gpio_bank() function
pinctrl: qcom: pinctrl-qcm2290: Add missing pins
pinctrl: qcom: switch to devm_gpiochip_add_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- arch_atomic64_cmpxchg relaxed variant [Jason]
- use of inbuilt swap in stack unwinder [Yu-Chun Lin]
- use of __ASSEMBLER__ in kernel headers [Thomas Huth]
* tag 'arc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headers
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
ARC: unwind: Use built-in sort swap to reduce code size and improve performance
ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxed
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another quick round of updates:
- revert mwifiex HT40 that was causing issues
- many ath10k/ath11k/ath12k fixes
- re-add some iwlwifi code I lost in a merge
- use kfree_sensitive() on an error path in cfg80211
* tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: use kfree_sensitive() for connkeys cleanup
wifi: iwlwifi: fix merge damage related to iwl_pci_resume
Revert "wifi: mwifiex: Fix HT40 bandwidth issue."
wifi: ath12k: fix uaf in ath12k_core_init()
wifi: ath12k: Fix hal_reo_cmd_status kernel-doc
wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
wifi: ath11k: consistently use ath11k_mac_get_fw_stats()
wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()
wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()
wifi: ath11k: move some firmware stats related functions outside of debugfs
wifi: ath11k: don't wait when there is no vdev started
wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
wil6210: fix support for sparrow chipsets
wifi: ath10k: Avoid vdev delete timeout when firmware is already down
ath10k: snoc: fix unbalanced IRQ enable in crash recovery
====================
Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
Fix ntuple rules targeting default RSS
This series addresses a regression in ethtool flow steering where rules
targeting the default RSS context (context 0) were incorrectly rejected.
The default RSS context always exists but is not stored in the rss_ctx
xarray like additional contexts. The current validation logic was
checking for the existence of context 0 in this array, causing valid
flow steering rules to be rejected.
This prevented configurations such as:
- High priority rules directing specific traffic to the default context
- Low priority catch-all rules directing remaining traffic to additional
contexts
Patch 1 fixes the validation logic to skip the existence check for
context 0.
Patch 2 adds a selftest that verifies this behavior.
v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com
v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
context
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.
The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.
For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.
Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- eir: Fix NULL pointer deference on eir_get_service_data
- eir: Fix possible crashes on eir_create_adv_data
- hci_sync: Fix broadcast/PA when using an existing instance
- ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
- ISO: Fix not using bc_sid as advertisement SID
- MGMT: Fix sparse errors
* tag 'for-net-2025-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix sparse errors
Bluetooth: ISO: Fix not using bc_sid as advertisement SID
Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
Bluetooth: hci_sync: Fix broadcast/PA when using an existing instance
Bluetooth: Fix NULL pointer deference on eir_get_service_data
====================
Link: https://patch.msgid.link/20250611204944.1559356-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before the cited commit, the kernel unconditionally embedded SCM
credentials to skb for embryo sockets even when both the sender
and listener disabled SO_PASSCRED and SO_PASSPIDFD.
Now, the credentials are added to skb only when configured by the
sender or the listener.
However, as reported in the link below, it caused a regression for
some programs that assume credentials are included in every skb,
but sometimes not now.
The only problematic scenario would be that a socket starts listening
before setting the option. Then, there will be 2 types of non-small
race window, where a client can send skb without credentials, which
the peer receives as an "invalid" message (and aborts the connection
it seems ?):
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s1.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
or
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s3, _ = s1.accept() <-- Inherit cred options
s2.send() <-- w/o cred but not set yet
s3.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
It's unfortunate that buggy programs depend on the behaviour,
but let's restore the previous behaviour.
Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().")
Reported-by: Jacek Łuczak <difrost.kernel@gmail.com>
Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Jacek Łuczak <difrost.kernel@gmail.com>
Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller created an IPv6 route from a malformed packet, which has
a prefix len > 128, triggering the splat below. [0]
This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore
fib6_config validation for SIOCADDRT.").
The cited commit removed fib6_config validation from some callers
of ip6_add_route().
Let's move the validation back to ip6_route_add() and
ip6_route_multipath_add().
[0]:
UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34
index 20 is out of range for type '__u8 [16]'
CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132
[<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138
[<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline]
[<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120
[<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129
[<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233
[<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455
[<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline]
[<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793
[<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889
[<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487
[<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878
[<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570
[<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874
[<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988
[<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436
[<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491
[<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588
[<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline]
[<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309
[<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977
[<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090
[<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline]
[<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235
[<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485
[<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938
[<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984
[<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline]
[<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686
[<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738
[<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline]
[<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline]
[<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746
[<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
[<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
[<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197
Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().")
Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9fb ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails.
Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The veth peer device is RCU protected, but when the peer device gets
deleted (veth_dellink) then the pointer is assigned NULL (via
RCU_INIT_POINTER).
This patch adds a necessary NULL check in veth_xdp_rcv when accessing
the veth peer net_device.
This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc
backpressure on full ptr_ring to reduce TX drops"). The bug is a race
and only triggers when having inflight packets on a veth that is being
deleted.
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/
Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net_sched: no longer use qdisc_tree_flush_backlog()
This series is based on a report from Gerrard Tai.
Essentially, all users of qdisc_tree_flush_backlog() are racy.
We must instead use qdisc_purge_queue().
====================
Link: https://patch.msgid.link/20250611111515.1983366-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.
We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.
Tested:
tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing a non-exact phy_caps lookup, we are looking for a
supported mode that matches as closely as possible the passed speed/duplex.
Blamed patch broke that logic by returning a match too early in case
the caller asks for half-duplex, as a full-duplex linkmode may match
first, and returned as a non-exact match without even trying to mach on
half-duplex modes.
Reported-by: Jijie Shao <shaojijie@huawei.com>
Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576
Tested-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()")
Cc: stable@vger.kernel.org
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix trivial ICC_SRE_EL2 register spelling typo in booting.rst.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
CC: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250610120935.852034-1-lpieralisi@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The sqpoll thread is dereferenced with rcu read protection in one place,
so it needs to be annotated as an __rcu type, and should consistently
use rcu helpers for access and assignment to make sparse happy.
Since most of the accesses occur under the sqd->lock, we can use
rcu_dereference_protected() without declaring an rcu read section.
Provide a simple helper to get the thread from a locked context.
Fixes: ac0b8b327a5677d ("io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250611205343.1821117-1-kbusch@meta.com
[axboe: fold in fix for register.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
MSI Bravo 17 (D7VF), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work properly.
Signed-off-by: Gabriel Santese <santesegabriel@gmail.com>
Link: https://patch.msgid.link/20250530005444.23398-1-santesegabriel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This function takes super_lock in shared mode, so it should release the
same lock.
Cc: stable@vger.kernel.org # v6.16-rc1
Fixes: af7551cf13cf7f ("super: remove pointless s_root checks")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://lore.kernel.org/20250611164044.GF6138@frogsfrogsfrogs
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We want to print the name in case of mkdir failure and now we will
get a cryptic (efault) as name.
Fixes: c54b386969a5 ("VFS: Change vfs_mkdir() to return the dentry.")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250612072245.2825938-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add the new firmware filename suffix used for SoundWire systems with
CS35L57, CS35L63 or CS35L56 later than B0 silicon. This uses the SoundWire
physical address of the amp to identify which firmware file to load on that
amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L56 B0 if .bin files are not found with the older
suffix. Some changes in wm_adsp needed to support this have been included
in this patch because they are trivial.
The allows future products with CS35L56 B0 silicon to use the same firmware
file naming as CS35L57 and cs35L63, while retaining backward compatibility
for firmware that has already been published with the old naming scheme.
The old suffix is searched first, partly because there are already many
files using that naming scheme, but also because they are a smaller subset
of all the possible fallback name options offered by wm_adsp so we know
that it will either find the qualified files or fail. All the firmware
files already published have the wmfw qualified with only the ACPI SSID and
the bin files qualified with both SSID and the suffix.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by the
address pin on the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing a redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There are already many published firmware for CS35L56 B0 silicon so this
first looks for the original name suffix, to keep backward compatibility.
If this doesn't find .bin files it will switch to using the new name suffix
so that future products using CS35L56 B0 can start to use the new suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The
change in wm_adsp needed to support this has been included in this patch
because it is fairly trivial.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by a pin on
the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing the redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There have not been any firmwares published for CS35L57 or CS35L63, so
these can safely be switched to using the SoundWire unique address as the
suffix string. Also note that the machine driver in older kernel version
only has match entries for the CS35L56 Soundwire identity so any future
product with a cs35L57 or CS35L63 would require a new kernel anyway.
There are already many published firmware for CS35L56 B0 silicon so this
keeps the original naming scheme on those, to preserve backward
compatibility.
Note that although sdw_slave.id contains a unique_id field, this cannot
be trusted because the SoundWire core code also puts magic values into it
that it uses as a flag. So the unique ID is read from the chip register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When checking for unsupported expect an error is printed every time.
This spams the log for platforms where this is expected, e.g. ls1028a
having a Vivante (etnaviv) GPU and Mali display processor.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250523064042.3275926-1-alexander.stein@ew.tq-group.com
|
