summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-26net_sched: convert tcindex to call tcf_exts_destroy from rcu callbackAlexei Starovoitov
Adjust destroy path of cls_tcindex to call tcf_exts_destroy() after rcu grace period. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: act_bpf: remove unnecessary copyAlexei Starovoitov
Fix harmless typo and avoid unnecessary copy of empty 'prog' into unused 'strcut tcf_bpf_cfg old'. Fixes: f4eaed28c783 ("act_bpf: fix memory leaks when replacing bpf programs") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26net_sched: make tcf_hash_destroy() staticAlexei Starovoitov
tcf_hash_destroy() used once. Make it static. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26ASoC: tegra: Use devm_ioremap_resource instead of open codeAxel Lin
Use devm_ioremap_resource() to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-26spi: check bits_per_word in spi_setupStefan Brüns
This allows drivers for devices connected via SPI to check if the controller supports a given bits_per_word value during setup. Currently any BPW value is accepted durings setup, and transfers are rejected later. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-26mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detectedSreekanth Reddy
Driver crashes if the BIOS do not set up at least one memory I/O resource. This failure can happen if the device is too slow to respond during POST and is missed by the BIOS, but Linux then detects the device later in the boot process. Based on a patch from Timothy Pearson <tpearson@raptorengineeringinc.com> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26ASoC: omap-hdmi-audio: Set buffer bytes step constraint to 128Jyri Sarha
Set buffer bytes step constraint to 128. A matching constraint has already been set to period size. This helps PCM setup to tolerate ALSA clients that set the PCM hw params in unusual order. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-26lib/Makefile: remove CONFIG_AVERAGE build ruleValentin Rothberg
The Kconfig option AVERAGE and its implementation has been removed by commit f4e774f55fe0 ("average: remove out-of-line implementation"). Remove the dead build rule in lib/Makefile. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26qla2xxx: Avoid that sparse complains about context imbalancesBart Van Assche
Surround conditional locking statements with "#ifndef __CHECKER__" / "#endif" to hide these for the sparse static source code analysis tool. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove dead codeBart Van Assche
The "return QLA_SUCCESS" statement just above the "fw_load_failed" label cannot be reached, hence remove it. Additionally remove the "else" keyword since the code block below the if-statement ends with a return statement. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove a superfluous testBart Van Assche
Avoid that smatch reports the following warning: drivers/scsi/qla2xxx/qla_attr.c:1081: qla2x00_model_desc_show() warn: this array is probably non-NULL. 'vha->hw->model_desc' Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Fix sparse annotationsBart Van Assche
This patch removes 21 casts between an __iomem pointer type and another data type but also introduces five new casts (see also the casts with "__force"). Although this patch does not change any functionality, IMHO the code with __force casts needs further review. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Avoid that sparse complains about duplicate [noderef] attributesBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove __constant_ prefixBart Van Assche
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Replace two macros with an inline functionBart Van Assche
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros with the inline function addr_in_range(). This avoids that the compiler reports the following warning when building with W=1: comparison of unsigned expression >= 0 is always true. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove set-but-not-used variablesBart Van Assche
Detected these variables by building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Declare local functions staticBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Report both rsp_info and rsp_info_lenBart Van Assche
Let the debug statement in qlafx00_tm_iocb_entry() report both rsp_info and rsp_info_len instead of reporting rsp_info_len twice. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26Input: synaptics - fix handling of disabling gesture modeDmitry Torokhov
Bit 2 of the mode byte has dual meaning: it can disable reporting of gestures when touchpad works in Relative mode or normal Absolute mode, or it can enable so called Extended W-Mode when touchpad uses enhanced Absolute mode (W-mode). The extended W-Mode confuses our driver and causes missing button presses on some Thinkpads (x250, T450s), so let's make sure we do not enable it. Also, according to the spec W mode "... bit is defined only in Absolute mode on pads whose capExtended capability bit is set. In Relative mode and in TouchPads without this capability, the bit is reserved and should be left at 0.", so let's make sure we respect this requirement as well. Reported-by: Nick Bowler <nbowler@draconx.ca> Suggested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Nick Bowler <nbowler@draconx.ca> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-26Add factory recertified Crucial M500s to blacklistGuillermo A. Amaral
The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral <g@maral.me> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2015-08-26s390/sclp_vt220: support magic sysrequestsHendrik Brueckner
Implement magic sysrequest handling for the VT220 terminal (also known as the Integrated ASCII console on the HMC/SE). To invoke a "magic sysrequest" function, press "Ctrl+o" followed by a second character that designates the debugging function. The handling of the sysrq is scheduled away from the SCLP IRQ context; because large amounts of sysrq output might fill up the console buffers. The console might deadlock because it cannot empty the buffers while still in the receiving IRQ context. This behavior is the same as for the SCLP console. Reported-by: Horst Weber <hweber@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26s390/ctrlchar: improve handling of magic sysrequestsHendrik Brueckner
Extract the sysrq handling from the ctrlchar_handle() into a separate function that can be directly used by other users. Introduce a new sysrq_work structure to embed the work_struct and to specify the magic sysrq function to be invoked. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26s390/numa: remove superfluous ARCH_WANT definesMichael Holzheu
The NUMA system call "__ARCH_WANT" defines are not used by the Linux kernel, therefore remove them. Fixes: 9df62adffeb0 ("s390/numa: add core infrastructure") Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26s390/3270: redraw screen on unsolicited device endMartin Schwidefsky
If a 3270 terminal is disconnected and later reconnected again, it gets an unsolicited device end. This is currently ignored and you have to hit the clear key to get the screen redrawn. Add an automatic full redraw of the screen for this case. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26NVMe: Using PRACT bit to generate and verify PI by controllerAlok Pandey
This patch enables the PRCHK and reftag support when PRACT bit is set, and block layer integrity is disabled. Signed-off-by: Alok Pandey <pandey.alok@samsung.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-26st: Destroy st_index_idr on module exitJohannes Thumshirn
Destroy st_index_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26megaraid_sas: fix whitespace errorsBjorn Helgaas
Fix whitespace and indentation errors. No code change. [jejb: checkpatch fixes] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26megaraid_sas: use dev_printk when possibleBjorn Helgaas
Use dev_printk() when possible to make messages more useful. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26megaraid : use dev_printk when possibleBjorn Helgaas
Use dev_printk() when possible to make messages more useful. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26scsi: Add ALUA state change UA handlingHannes Reinecke
Log the ALUA state change unit attention correctly with the message log and emit an event to allow user-space tools to react to it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26ALSA: usb-audio: Handle normal and auto-suspend equallyTakashi Iwai
In theory, the device may get suspended even at runtime PM suspend. Currently we don't save the mixer state for autopm, and it may bring inconsistency. This patch removes the special handling for autosuspend. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-26mptfusion: prevent some memory corruptionDan Carpenter
These are signed values the come from the user, we put a cap on the upper bounds but not on the lower bounds. We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and proceed as if that means that "karg.dataSgeOffset" is correct but this fails to consider that the "sz" calculations can have integer overflows. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26tracing/uprobes: Do not print '0x (null)' when offset is 0Wang Nan
When manually added uprobe point with zero address, 'uprobe_events' output '(null)' instead of 0x00000000: # echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \ /sys/kernel/debug/tracing/uprobe_events # cat /sys/kernel/debug/tracing/uprobe_events p:probe_libc/abs_0 /path/to/lib.bin:0x (null) arg1=%ax This patch fixes this behavior: # cat /sys/kernel/debug/tracing/uprobe_events p:probe_libc/abs_0 /path/to/lib.bin:0x0000000000000000 Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440586666-235233-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26perf probe: Support probing at absolute addressWang Nan
It should be useful to allow 'perf probe' probe at absolute offset of a target. For example, when (u)probing at a instruction of a shared object in a embedded system where debuginfo is not avaliable but we know the offset of that instruction by manually digging. This patch enables following perf probe command syntax: # perf probe 0xffffffff811e6615 And # perf probe /lib/x86_64-linux-gnu/libc-2.19.so 0xeb860 In the above example, we don't need a anchor symbol, so it is possible to compute absolute addresses using other methods and then use 'perf probe' to create the probing points. v1 -> v2: Drop the leading '+' in cmdline; Allow uprobing at offset 0x0; Improve 'perf probe -l' result when uprobe at area without debuginfo. v2 -> v3: Split bugfix to a separated patch. Test result: # perf probe 0xffffffff8119d175 %ax # perf probe sys_write %ax # perf probe /lib64/libc-2.18.so 0x0 %ax # perf probe /lib64/libc-2.18.so 0x5 %ax # perf probe /lib64/libc-2.18.so 0xd8e40 %ax # perf probe /lib64/libc-2.18.so __write %ax # perf probe /lib64/libc-2.18.so 0xd8e49 %ax # cat /sys/kernel/debug/tracing/uprobe_events p:probe_libc/abs_0 /lib64/libc-2.18.so:0x (null) arg1=%ax p:probe_libc/abs_5 /lib64/libc-2.18.so:0x0000000000000005 arg1=%ax p:probe_libc/abs_d8e40 /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax p:probe_libc/__write /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax p:probe_libc/abs_d8e49 /lib64/libc-2.18.so:0x00000000000d8e49 arg1=%ax # cat /sys/kernel/debug/tracing/kprobe_events p:probe/abs_ffffffff8119d175 0xffffffff8119d175 arg1=%ax p:probe/sys_write _text+1692016 arg1=%ax # perf probe -l Failed to find debug information for address 5 probe:abs_ffffffff8119d175 (on sys_write+5 with arg1) probe:sys_write (on sys_write with arg1) probe_libc:__write (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1) probe_libc:abs_0 (on 0x0 in /lib64/libc-2.18.so with arg1) probe_libc:abs_5 (on 0x5 in /lib64/libc-2.18.so with arg1) probe_libc:abs_d8e40 (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1) probe_libc:abs_d8e49 (on __GI___libc_write+9 in /lib64/libc-2.18.so with arg1) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440586666-235233-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26perf probe: Fix error reported when offset without functionWang Nan
This patch fixes a bug that, when offset is provided but function is lost, parse_perf_probe_point() will give a "" string as function name, so the checking code at the end of parse_perf_probe_point() become useless. For example: # perf probe +0x1234 Failed to find symbol in kernel Error: Failed to add events. After this patch: # perf probe +0x1234 Semantic error :Offset requires an entry function. Error: Command Parse Error. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440586666-235233-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26ALSA: usb-audio: Replace probing flag with active refcountTakashi Iwai
We can use active refcount for preventing autopm during probe. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-26perf probe: Fix list result when address is zeroWang Nan
When manually added uprobe point with zero address, 'perf probe -l' reports error. For example: # echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \ /sys/kernel/debug/tracing/uprobe_events # perf probe -l Error: Failed to show event list. Probing at 0x0 is possible and useful when lib.bin is not a normal shared object but is manually mapped. However, in this case kernel report: # cat /sys/kernel/debug/tracing/uprobe_events p:probe_libc/abs_0 /path/to/lib.bin:0x (null) arg1=%ax This patch supports the above kernel output. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440586666-235233-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26ALSA: usb-audio: Avoid nested autoresume callsTakashi Iwai
After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-26perf probe: Fix list result when symbol can't be foundWang Nan
'perf probe -l' reports error if it is unable find symbol through address. Here is an example. # echo 'p:probe_libc/abs_5 /lib64/libc.so.6:0x5' > /sys/kernel/debug/tracing/uprobe_events # cat /sys/kernel/debug/tracing/uprobe_events p:probe_libc/abs_5 /lib64/libc.so.6:0x0000000000000005 # perf probe -l Error: Failed to show event list Also, this situation triggers a logical inconsistency in convert_to_perf_probe_point() that, it returns ENOMEM but actually it never try strdup(). This patch removes !tp->module && !is_kprobe condition, so it always uses address to build function name if symbol not found. Test result: # perf probe -l probe_libc:abs_5 (on 0x5 in /lib64/libc.so.6) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440586666-235233-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26tools build: Allow duplicate objects in the object listJiri Olsa
It's sometimes useful to specify the object affiliation to multiple config options like: libperf-$(CONFIG_X86) += tsc.o libperf-$(CONFIG_AUXTRACE) += tsc.o while the object itself is linked only once. Adding the support for this and ignoring duplicate objects in the object list. Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20150826130103.GF22670@krava.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26perf tools: Remove export.h from MANIFESTJiri Olsa
We don't carry an export.h wrapper anymore, remove it from the MANIFEST file to avoid breaking the make perf-tar targets. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20150826080750.GD22670@krava.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26perf probe: Prevent segfault when reading probe point with absolute addressWang Nan
'perf probe -l' panic if there is a manually inserted probing point with absolute address. For example: # echo 'p:probe/abs_ffffffff811e6615 0xffffffff811e6615' > /sys/kernel/debug/tracing/kprobe_events # perf probe -l Segmentation fault (core dumped) This patch fix this problem by considering the situation that "tp->symbol == NULL" in find_perf_probe_point_from_dwarf() and find_perf_probe_point_from_map(). After this patch: # perf probe -l probe:abs_ffffffff811e6615 (on SyS_write+5@fs/read_write.c) And when debug info is missing: # rm -rf ~/.debug # mv /lib/modules/4.2.0-rc1+/build/vmlinux /lib/modules/4.2.0-rc1+/build/vmlinux.bak # perf probe -l probe:abs_ffffffff811e6615 (on sys_write+5) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1440509256-193590-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26MIPS: MT: Remove "weak" from vpe_run() declarationBjorn Helgaas
Weak header file declarations are error-prone because they make every definition weak, and the linker chooses one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). That's not a problem for vpe_run() because Kconfig ensures there's never more than one definition: - vpe_run() is defined in arch/mips/kernel/vpe-mt.c if CONFIG_MIPS_VPE_LOADER_MT=y - vpe_run() is defined in arch/mips/mti-malta/malta-amon.c if CONFIG_MIPS_CMP=y - CONFIG_MIPS_VPE_LOADER_MT cannot be set if CONFIG_MIPS_CMP=y But it's simpler to verify correctness if we remove "weak" from the picture and test the config symbols directly. Remove "weak" from the vpe_run() declaration and use #if to test whether a definition should be present. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: VPE: Exit vpe_release() early if vpe_run() isn't definedBjorn Helgaas
vpe_run() is a weak symbol. If there's no definition of it, its value is zero. If vpe_run is zero, return failure early. We're going to fail anyway, so there's no point in getting a VPE and attempting to load it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10683/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Remove "weak" from platform_maar_init() declarationBjorn Helgaas
Weak header file declarations are error-prone because they make every definition weak, and the linker chooses one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). platform_maar_init() is defined in: - arch/mips/mm/init.c (where it is marked "weak") - arch/mips/mti-malta/malta-memory.c (without annotation) The "weak" attribute on the platform_maar_init() extern declaration applies to the platform-specific definition in arch/mips/mti-malta/malta-memory.c, so both definitions are weak, and which one we get depends on link order. Remove the "weak" attribute from the declaration. That makes the malta definition strong, so it will always be preferred if it is present. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: linux-mips@linux-mips.org Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: CPC: Remove "weak" from mips_cpc_phys_base() and make it staticBjorn Helgaas
There's only one implementation of mips_cpc_phys_base(), and it's only used within the same file, so it doesn't need to be weak, and it doesn't need an extern declaration. Remove the extern mips_cpc_phys_base() declaration and make it static. [ralf@linux-mips.org: Fixed conflict.] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10681/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: Drop CONFIG_RUNTIME_DEBUG & debug.hPaul Burton
The debug.h header provided some MIPS-specific debug macros, which are no longer used at all. Remove them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10693/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: ops-emma2rh: Drop nonsensical db_assertPaul Burton
The db_assert call checks whether the bus_num pointer is non-NULL, but does so after said pointer has been dereferenced by the assignment on the previous line. Thus the check is pointless & likely to have been optimised out by the compiler anyway. The check_args function is static & only ever called from the local file with bus_num being a pointer to an on-stack variable, so the check seems somewhat overzealous anyway. Simply remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10692/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: rt3883: Prepare rt3883_pci_irq_handler for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: netlogic: Prepare ipi handlers for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:50:32 +0000