summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-07drm/nouveau/bios: make jump conditionalIlia Mirkin
This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943 Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org
2014-01-07drm/nvce/mc: fix msi rearm on GF114Sid Boyce
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nvc0/gr: fix mthd data submissionKelly Doran
If the initial data element is 0, it will never be written, even though the value from the previous method may be there. Signed-off-by: Kelly Doran <kel.p.doran@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nouveau: populate master subdev pointer only when fully constructedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07extcon: max14577: Add extcon-max14577 driver to support MUIC deviceChanwoo Choi
This patch supports Maxim MAX14577 MUIC(Micro USB Interface Controller) device by using EXTCON subsystem to handle various external connectors. The max14577 device uses regmap method for i2c communication and supports irq domain. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-01-07extcon: fix switch class porting guide (Documentation)MyungJoo Ham
- Unfinished sentence finished. - Incorrect description on the compat-mode condition corrected. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-01-07extcon: arizona: Add support for headphone detection on wm5110 rev DCharles Keepax
wm5110 rev D is the first chip to use headphone detection IP 2, specify such and make a small correction as the impedance value is actually read in 0.5 ohm increments now. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: arizona: No need to switch back down HPDET rangesCharles Keepax
No point in revisiting ranges the detection will be no more accurate the second time simply report that the resistance is right on the range boundry. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: arizona: Fix race with microphone detection and removalCharles Keepax
The microphone detection code is run as delayed work to provide additional debounce, it is possible that the jack could have been removed by the time we process the microphone detection. Turn this case into a no op. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: arizona: Fix reset of HPDET after race with removalCharles Keepax
We need to make sure we reset back to our starting state, especially making sure that we have disabled poll in the register cache. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: arizona: Add defines for microphone detection levelsCharles Keepax
Improve readability by creating a define for each microphone detection level. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: palmas: Handle ID interrupt properly using USB_ID_INT_SRCGeorge Cherian
Always cross check with the ID state and the source of interrupt. Also add a case in which ID Source is ID_GND but LATCH state is set wrongly. This uses the previous Link stat to determine the new state. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: palmas: Added a new compatible type *ti,palmas-usb-vid*Kishon Vijay Abraham I
The Palmas device contains only a USB VBUS-ID detector, so added a compatible type *ti,palmas-usb-vid*. Didn't remove the existing compatible types for backward compatibility. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07MAINTAINERS: Add git repository for extconChanwoo Choi
This patch add git repository url for EXTCON subsystem. Following git repository is currently used to maintain EXTCON. - git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-07extcon: gpio: Request gpio pin before modifying its stateGuenter Roeck
Commit 338de0ca (extcon: gpio: Use gpio driver/chip debounce if supported) introduced a call to gpio_set_debounce() before actually requesting the respective gpio pin from the gpio subsystem. The gpio subsystem expects that a gpio pin was requested before modifying its state. Not doing so results in a warning from gpiolib, and the gpio pin is auto-requested. This in turn causes the subsequent devm_gpio_request_one() to fail. So devm_gpio_request_one() must be called prior to calling gpio_set_debounce(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-01-06agp: Support 64-bit APBASEBjorn Helgaas
Per the AGP 3.0 spec, APBASE is a standard PCI BAR and may be either 32 bits or 64 bits wide. Many drivers read APBASE directly, but they only handled 32-bit BARs. The PCI core reads APBASE at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfix from Ted Ts'o: "Fix a regression introduced in v3.13-rc6" * tag 'ext4_for_linus_stable' of http://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bigalloc regression
2014-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "I'm hoping this is the very last batch of networking fixes for 3.13, here goes nothing: 1) Fix crashes in VLAN's header_ops passthru. 2) Bridge multicast code needs to use BH spinlocks to prevent deadlocks with timers. From Curt Brune. 3) ipv6 tunnels lack proper synchornization when updating percpu statistics. From Li RongQing. 4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal Kalderon. 5) Avoid undefined operator evaluation order in llc code, from Daniel Borkmann. 6) Error paths in various GSO offload paths do not unwind properly, in particular they must undo any modifications they have made to the SKB. From Wei-Chun Chao. 7) Fix RX refill races during restore in virtio-net, from Jason Wang. 8) Fix SKB use after free in LLC code, from Daniel Borkmann. 9) Missing unlock and OOPS in netpoll code when VLAN tag handling fails. 10) Fix vxlan device attachment wrt ipv6, from Fan Du. 11) Don't allow creating infiniband links to non-infiniband devices, from Hangbin Liu. 12) Revert FEC phy reset active low change, it breaks things. From Fabio Estevam. 13) Fix header pointer handling in 6lowpan header building code, from Daniel Borkmann. 14) Fix RSS handling in be2net driver, from Vasundhara Volam. 15) Fix modem port indexing in HSO driver, from Dan Williams" * http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) bridge: use spin_lock_bh() in br_multicast_set_hash_max ipv6: don't install anycast address for /128 addresses on routers hso: fix handling of modem port SERIAL_STATE notifications isdn: Drop big endian cpp checks from telespci and hfc_pci drivers be2net: fix max_evt_qs calculation for BE3 in SR-IOV config be2net: increase the timeout value for loopback-test FW cmd be2net: disable RSS when number of RXQs is reduced to 1 via set-channels xen-netback: Include header for vmalloc net: 6lowpan: fix lowpan_header_create non-compression memcpy call fec: Revert "fec: Do not assume that PHY reset is active low" bnx2x: fix VLAN configuration for VFs. bnx2x: fix AFEX memory overflow bnx2x: Clean before update RSS arrives bnx2x: Correct number of MSI-X vectors for VFs bnx2x: limit number of interrupt vectors for 57711 qlcnic: Fix bug in Tx completion path infiniband: make sure the src net is infiniband when create new link {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly cxgb4: allow large buffer size to have page size netpoll: Fix missing TXQ unlock and and OOPS. ...
2014-01-06Merge branches 'acpi-battery' and 'pm-cpufreq'Rafael J. Wysocki
* acpi-battery: ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS * pm-cpufreq: intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
2014-01-06bridge: use spin_lock_bh() in br_multicast_set_hash_maxCurt Brune
br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ipv6: don't install anycast address for /128 addresses on routersHannes Frederic Sowa
It does not make sense to create an anycast address for an /128-prefix. Suppress it. As 32019e651c6fce ("ipv6: Do not leave router anycast address for /127 prefixes.") shows we also may not leave them, because we could accidentally remove an anycast address the user has allocated or got added via another prefix. Cc: François-Xavier Le Bail <fx.lebail@yahoo.com> Cc: Thomas Haller <thaller@redhat.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06hso: fix handling of modem port SERIAL_STATE notificationsDan Williams
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ACPI / Battery: Add a _BIX quirk for NEC LZ750/LSLan Tianyu
The AML method _BIX of NEC LZ750/LS returns a broken package which skips the first member "Revision" (ACPI 5.0, Table 10-234). Add a quirk for this machine to skip member "Revision" during parsing the package returned by _BIX. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=67351 Reported-and-tested-by: Francisco Castro <fcr@adinet.com.uy> Cc: 3.8+ <stable@vger.kernel.org> " 3.8+ Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.Dirk Brandewie
KVM environments do not support APERF/MPERF MSRs. intel_pstate cannot operate without these registers. The previous validity checks in intel_pstate_msrs_not_valid() are insufficent in nested KVMs. References: https://bugzilla.redhat.com/show_bug.cgi?id=1046317 Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06isdn: Drop big endian cpp checks from telespci and hfc_pci driversGuenter Roeck
With arm:allmodconfig, building the Teles PCI driver fails with telespci.c:294:2: error: #error "not running on big endian machines now" Similar, building the driver for HFC PCI-Bus cards fails with hfc_pci.c:1647:2: error: #error "not running on big endian machines now" Remove the big endian cpp check from both drivers to fix the build errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06tracing: Remove double-underscore naming in syscall trigger invocationsTom Zanussi
There's no reason to use double-underscores for any variable name in ftrace_syscall_enter()/exit(), since those functions aren't generated and there's no need to avoid namespace collisions as with the event macros, which is where the original invocation code came from. Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-06tracing/kprobes: Add trace event trigger invocationsTom Zanussi
Add code to the kprobe/kretprobe event functions that will invoke any event triggers associated with a probe's ftrace_event_file. The code to do this is very similar to the invocation code already used to invoke the triggers associated with static events and essentially replaces the existing soft-disable checks with a superset that preserves the original behavior but adds the bits needed to support event triggers. Link: http://lkml.kernel.org/r/f2d49f157b608070045fdb26c9564d5a05a5a7d0.1389036657.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-06Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-01-06Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2014-01-06ext4: fix bigalloc regressionEric Whitney
Commit f5a44db5d2 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: Eric Whitney <enwlinux@gmail.com>
2014-01-06Merge branch 'be2net'David S. Miller
Sathya Perla says: ==================== be2net: patch set Pls apply the following bug fixes to the 'net' tree. Thanks. Suresh Reddy (2): be2net: increase the timeout value for loopback-test FW cmd be2net: fix max_evt_qs calculation for BE3 in SR-IOV config Vasundhara Volam (1): be2net: disable RSS when number of RXQs is reduced to 1 via set-channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: fix max_evt_qs calculation for BE3 in SR-IOV configSuresh Reddy
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: increase the timeout value for loopback-test FW cmdSuresh Reddy
The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06be2net: disable RSS when number of RXQs is reduced to 1 via set-channelsVasundhara Volam
When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ASoC: dpcm: Allow PCMs to omit the set of supported formatsLars-Peter Clausen
Allow PCMs that do not impose any restrictions on the supported formats to set the formats field to 0, Instead of assuming that this means that the PCM does not support any formats (which doesn't make much sense), assume that it supports all formats. This brings the behavior of DPCM closer to that of non-DPCM. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: dpcm: Add helper function for initializing runtime pcmLars-Peter Clausen
We have the same code for initializing the runtime pcm on both the playback and the capture path. Factor this out into a common helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: atmel: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06HID: hidraw: make comment more accurate and nicerJiri Kosina
Reformat and reword some of the comments to make them more understandable. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-06ASoC: mc13783: trivial: Cleanup moduleAlexander Shiyan
This is a trivial cleanup: remove useless variable mc13xxx and extra spaces. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Drop fixed ADC & DAC ports usageAlexander Shiyan
There are no users of this driver without pdata, so stop using constant assignment of ADC and DAC ports. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Use core error messages if registration failsAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Use module_platform_driver_probe()Alexander Shiyan
mc13783-codec is probed only by MC13XXX MFD core driver so use module_platform_driver_probe(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: simple-card: Fix the sysclk selection.Xiubo Li
For spdif there is no need to do the sysclk setting. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07Merge branch 'master' of git://git.infradead.org/users/pcmoore/selinux into nextJames Morris
Conflicts: security/selinux/hooks.c Resolved using request struct. Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-01-06tpm/tpm-sysfs: active_show() can be staticFengguang Wu
so we make it static CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNPJason Gunthorpe
If CONFIG_PM_SLEEP=n, CONFIG_PNP=y we get this warning: drivers/char/tpm/tpm_tis.c:706:13: warning: 'tpm_tis_reenable_interrupts' defined but not used [-Wunused-function] This seems to have been introduced in a2fa3fb0d 'tpm: convert tpm_tis driver to use dev_pm_ops from legacy pm_ops' Also, unpon reviewing, the #ifdefs around tpm_tis_pm are not right, the first reference is protected, the second is not. tpm_tis_pm is always defined so we can drop the #ifdef. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Make tpm-dev allocate a per-file structureJason Gunthorpe
This consolidates everything that is only used within tpm-dev.c into tpm-dev.c and out of the publicly visible struct tpm_chip. The per-file allocation lays the ground work for someday fixing the strange forced O_EXCL behaviour of the current code. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Use the ops structure instead of a copy in tpm_vendor_specificJason Gunthorpe
This builds on the last commit to use the ops structure in the core and reduce the size of tpm_vendor_specific. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Create a tpm_class_ops structure and use it in the driversJason Gunthorpe
This replaces the static initialization of a tpm_vendor_specific structure in the drivers with the standard Linux idiom of providing a const structure of function pointers. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com> [phuewe: did apply manually due to commit 191ffc6bde3 tpm/tpm_i2c_atmel: fix coccinelle warnings] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06tpm: Pull all driver sysfs code into tpm-sysfs.cJason Gunthorpe
The tpm core now sets up and controls all sysfs attributes, instead of having each driver have a unique take on it. All drivers now now have a uniform set of attributes, and no sysfs related entry points are exported from the tpm core module. This also uses the new method used to declare sysfs attributes with DEVICE_ATTR_RO and 'struct attribute *' Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: had to apply the tpm_i2c_atmel part manually due to commit 191ffc6bde3fc tpm/tpm_i2c_atmel: fix coccinelle warnings] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
generated by cgit (git 2.34.1) at 2025-09-19 12:41:14 +0000