summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-16ath9k: simplify ath9k_hw_get_scaled_power functionGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: introduce ath9k_hw_get_scaled_power helperGabor Juhos
The computation of the scaled power value in various eeprom files uses identical code. Move that code into a helper function and use that instead of code duplication. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: use consistent value for REDUCE_SCALED_POWER_BY_THREE_CHAINGabor Juhos
The REDUCE_SCALED_POWER_BY_THREE_CHAIN symbol is defined in different eeprom files, and the value varies between the different files. In eeprom_def.c and in ar9003_eeprom.c the value of the symbol is 9, however the comments in these files indicates the value should be 10*log10(3)*2 which is 9.54242509439325. Replace the the value to 10 in these files. Also add comments to eeprom_9287.c. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: use ath9k_hw_update_regulatory_maxpower in ath9k_hw_def_set_txpowerGabor Juhos
We have a helper function for updating the max_power_level value. Use that and remove the duplicated code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16net/wireless: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/net/wireless/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Simon Kelley <simon@thekelleys.org.uk> Cc: Jouni Malinen <j@w1.fi> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: add function retrieve average rssiWey-Yi Guy
Add utility function to provide the average rssi per vif Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16rtlwifi: rtl8192ce: Remove false positives for kmemleakLarry Finger
When rtl8192ce is in operation, kmemleak indicates a number of leaks, yet when the driver is removed all are gone. These false positives happen in two locations: unreferenced object 0xffff880041124000 (size 9536): comm "work_for_cpu", pid 9295, jiffies 4295037203 (age 20596.320s) hex dump (first 32 bytes): 33 00 00 01 01 6d 00 00 00 00 b1 0e 21 0b 00 00 3....m......!... 01 01 6d 00 00 00 00 8b 20 c0 e9 00 00 01 01 6d ..m..... ......m backtrace: [<ffffffff8137a1b1>] kmemleak_alloc+0x21/0x50 [<ffffffff8138d01f>] kmalloc_large_node+0x9a/0xa6 [<ffffffff811335a5>] __kmalloc_node_track_caller+0x175/0x3b0 [<ffffffff812ddfe3>] __alloc_skb+0x73/0x230 [<ffffffff812de1b8>] dev_alloc_skb+0x18/0x30 [<ffffffffa091a3b7>] rtl_pci_probe+0x10e0/0x17d2 [rtlwifi] -- snip -- unreferenced object 0xffff8800b4d3f600 (size 256): comm "kworker/u:2", pid 13221, jiffies 4297830173 (age 9424.568s) hex dump (first 32 bytes): 1c d6 45 b1 00 88 ff ff 1c d6 45 b1 00 88 ff ff ..E.......E..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8137a1b1>] kmemleak_alloc+0x21/0x50 [<ffffffff81130f43>] kmem_cache_alloc_node+0x153/0x270 [<ffffffff812ddfb6>] __alloc_skb+0x46/0x230 [<ffffffff812de1b8>] dev_alloc_skb+0x18/0x30 [<ffffffffa093264a>] rtl92c_set_fw_rsvdpagepkt+0x22a/0x5c0 [rtl8192c_common] -- snip -- Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath5k: add PCI idYoshinori Sato
This device works fine of ath5k. Details bellow 05:00.0 0200: 168c:ff1b (rev 01) 05:00.0 Ethernet controller: Atheros Communications Inc. Device ff1b (rev 01) Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at febf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k ath5k 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ath5k 0000:05:00.0: setting latency timer to 64 ath5k 0000:05:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x67 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x67 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: fix beacon descriptorRajkumar Manoharan
The tx interrupt for beacon queue is configured only for edma chips. As the edma chip does not support per descriptor interrupt, no need to set INTREQ for every beacon descriptor. And also clear ps filter for beacon frame. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: skip beaconing when reset work is pendingRajkumar Manoharan
Whenever the reset work is queued up, do not generate beacon. And also clear the beacon miss count once the beacon stuck was observed. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: reset noiseimmunity level to defaultRajkumar Manoharan
After the chip reset, the noise immunity levels are restored with history values. If the immunity levels are lower than the defaults, lets start with the optimal values. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16cfg80211: increse bss expire timeRajkumar Manoharan
The background scan completion takes more time when the station is having heavy uplink traffic. The scan state machine decides to fall back to home channel on every off-channel visit when there are pending frames in tx queue. bgscan completion took ~30sec on dual band US regulatory card. scan period = (20 active channels * probe timeout) + (12 passive channels * passive probe timeout) + (32 * timeout on home channel) + (32 * flush timeout) Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: fix ibss beacon next tbttRajkumar Manoharan
Sync-up ibss beacon timer with the beacon frame's timestamp. When the node acts as joiner, it has to sync with the received beacon timestamp instead of reading tsf from hw. As the hw tsf wont wont be update till bssid is configured. This patch programs hw tsf with the received beacon timestamp if beacon timers are yet to be configured. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: fix ibss fair beacon distribution for AR9462Rajkumar Manoharan
Update AR9462 initval to fix unbalance beacon distribution in Ad-Hoc network. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16tcp: restore formatting of macros for tcp_skb_cb sacked fieldNeal Cardwell
Commit b82d1bb4 inadvertendly placed unrelated new code between TCPCB_EVER_RETRANS and TCPCB_RETRANS and the other macros that refer to the sacked field in the struct tcp_skb_cb (probably because there was a misleading empty line there). This commit fixes up the formatting so that all macros related to the sacked field are adjacent again. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16drm/i915: Hold mode_config lock whilst changing mode for lastclose()Chris Wilson
Upon lastclose(), we switch back to the fbcon configuration. This requires taking the mode_config lock in order to serialise the change with output probing elsewhere. Reported-by: Oleksij Rempel <bug-track@fisher-privat.net> References: https://bugs.freedesktop.org/show_bug.cgi?id=48652 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-16atl1: remove unused member from atl1_adapter structureTony Zelenoff
Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16hostap: GFP_ATOMIC/GFP_KERNEL cleanupMatt Renzelmann
The driver is allocating memory during initialization with GFP_ATOMIC even though GFP_KERNEL is sufficient. This patch fixes it. Signed-off-by: Matt Renzelmann <mjr@cs.wisc.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: Take into account TSF adjustment latency in Toffset setpointJavier Cardona
When testing mesh synchronization we observed a global TSF slowdown that was dependent on the number of synchronized mesh stations. This seems to be caused by the TSF adjustment (read/write) latency. Adding a small margin to the Toffset setpoint solved the problem. Signed-off-by: Shinichi Hotori <hotorinn@gmail.com> Signed-off-by: Yu Niiro <yu.niiro@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: Choose a new toffset setpoint if a big tsf jump is detected.Javier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211_hwsim: fixup for tsf settingJavier Cardona
Last patch I sent failed to take into account the offset of each phy. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: Set the correct values for hwmp (1) and airtimeLinkMetric (1)Javier Cardona
Per sections 8.4.2.100.2 and 8.4.2.100.3 of Std 802.11-2012 Reported-by: Shinichi Hotori <hotorinn@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: optimize the hardware hang checkFelix Fietkau
Since it's only called when beacons are stuck, move it to the SWBA handler tasklet, to avoid doing redundant checks on every single interrupt. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: do not register LEDs on AR913xFelix Fietkau
LED support is typically handled via system GPIO on these platforms. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k_hw: add support for 8 AP mode interfacesFelix Fietkau
Also tweak beacon response times for better stability with the shorter timer intervals. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath5k: use compare_ether_addr on MAC addresses instead of memcmpJonathan Bither
Following Felix's recent patchset as an example I have replaced memcmp with compare_ether_addr. "Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp." Signed-off-by: Jonathan Bither <jonbither@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: Gather and report IRQ sync_cause errors.Ben Greear
Report all defined sync_cause errors in debugfs to aid with debugging. Use a macro to print out the interrupts file contents to decrease code duplication. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: Use macro to decrease code when priting recv stats.Ben Greear
This hides some repetitive code, and will help if the column widths ever need to change. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mac80211: check IEEE80211_HW_QUEUE_CONTROL in ieee80211_check_queues()Luciano Coelho
Commit 3a25a8c8 (mac80211: add improved HW queue control) introduced a bug when running in AP mode without the IEEE80211_HW_QUEUE_CONTROL flag set. The ieee80211_check_queues() function always returns -EINVAL, preventing AP mode from starting. To fix this, check whether this flag is set before checking if cab_queue is set properly. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16cfg80211: enforce lack of interface combinationsJohannes Berg
My grand plan to allow drivers to gradually move over to advertising virtual interface combinations and only enforce with drivers that do want it enforced doesn't seem to be working out, only Christian ever added the advertising (to carl9170), nobody else did. Begin enforcing combinations in cfg80211 so that users can rely on the information reported about a device. Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi
2012-04-16bcma: use fallback sprom if no on chip sprom is availableHauke Mehrtens
bcma should check for a fallback sprom every time it can not find a sprom on the card itself or a normal external sprom mapped into the memory of the chip. When otp sprom support was introduced it tried to read out the sprom from the wireless chip also if no otp sprom was available. This caused a Data bus error in bcma_sprom_get() when reading out the sprom for the SoC. This fixes a regression introduced in commit: commit 10d8493cd9efd38b1947b7a74276dbdc8311aa1a Author: Arend van Spriel <arend@broadcom.com> Date: Tue Mar 6 15:50:48 2012 +0100 bcma: add support for on-chip OTP memory used for SPROM storage This patch was tested on a Netgear WNDR3400 (Broadcom BCM4718 SoC). Reported-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16mfd: Fix asic3_gpio_to_irqDmitry Artamonow
Assumption that irq numbers of asic3 gpios start at IRQ_BOARD_START is certainly wrong - driver may as well use any other base for its irqs (consider for example the imaginary case of two ASIC3 chips onboard) Furthermore, some platforms even don't have IRQ_BOARD_START defined, so driver will fail to build on them: ------------------------------------------------------- drivers/mfd/asic3.c: In function 'asic3_gpio_to_irq': drivers/mfd/asic3.c:530: error: 'IRQ_BOARD_START' undeclared (first use in this function) drivers/mfd/asic3.c:530: error: (Each undeclared identifier is reported only once drivers/mfd/asic3.c:530: error: for each function it appears in.) ------------------------------------------------------- Fix it by using irq_base from driver data. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issueKeshava Munegowda
It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ext4: address scalability issue by removing extent cache statisticsTheodore Ts'o
Andi Kleen and Tim Chen have reported that under certain circumstances the extent cache statistics are causing scalability problems due to cache line bounces. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-04-16Merge tag 'fixes-for-v3.4-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v3.4-rc cycle Here are the fixes I have queued for v3.4-rc cycle so far. It includes fixes on many of the gadget drivers and a few of the UDC controller drivers. For musb we have a fix for a kernel oops when unloading omap2430.ko glue layer, proper error checking for pm_runtime_*, fix for the ULPI transfer block, and a bug fix in musb_cleanup_urb routine. For s3c-hsotg we have mostly FIFO-related fixes (proper TX FIFO allocation, TX FIFO corruption fix in DMA mode) but also a couple of minor fixes (fixing maximum packet size for ep0 and fix for big transfers with DMA). For the dwc3 driver we have a memory leak fix, a very important fix for USB30CV with SetFeature tests and the hability to handle ep0 requests bigger than wMaxPacketSize. On top of that there's a bunch of gadget driver minor fixes adding proper section annotations, and fixing up the sysfs interface for doing device-initiated connect/disconnect and so on. All patches have been pending on the mailing list for quite a while and look good for your for-linus branch.
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16mfd : Fix dbx500 compilation errorDaniel Lezcano
The ux500 default config enables the db5500 and the db8500. The incoming cpuidle driver uses the 'prcmu_enable_wakeups' and the 'prcmu_set_power_state' functions but these ones are defined but not implemented for the db5500, leading to an unresolved symbol error at link time. In order to compile, we have to disable the db5500 support which is not acceptable for the default config. I noticed there are also some other functions which are defined but not implemented. This patch fix this by removing the functions definitions and move out of the config section the empty functions which are normally used when the DB550 config is disabled. Only the functions which are not implemented are concerned by this modification. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16perf report: Fix crash showing warning related to kernel mapsDavid Ahern
While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash: (gdb) bt 0 0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380 1 cmd_report (argc=0, argv=<optimized out>, prefix=<optimized out>) at builtin-report.c:759 2 0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273 3 0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345 4 run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389 5 main (argc=3, argv=0x7fff80ceca70) at perf.c:487 kernel_map can be NULL, so need to handle it while dumping a warning to user. v2: - fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-16drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2Alex Deucher
Forget to unreserve after pinning. This can lead to problems in soft reset and resume. v2: rework patch as per Michel's suggestion. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-16drm/radeon: disable MSI on RV515Dave Airlie
My rv515 card is very flaky with msi enabled. Every so often it loses a rearm and never comes back, manually banging the rearm brings it back. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-16Bluetooth: Temporary keys should be retained during connectionVishal Agarwal
If a key is non persistent then it should not be used in future connections but it should be kept for current connection. And it should be removed when connecion is removed. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-16Bluetooth: hci_persistent_key should return boolVishal Agarwal
This patch changes the return type of function hci_persistent_key from int to bool because it makes more sense to return information whether a key is persistent or not as a bool. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-16ARM: at91: fix at91sam9261ek Ethernet dm9000 irqJean-Christophe PLAGNIOL-VILLARD
You need to setup the dm9000 irq via gpio_to_irq() since d0fbda9add (ARM: at91/gpio: drop PIN_BASE). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> [3.2+]
2012-04-16ARM: at91: fix rm9200ek flash sizeJean-Christophe PLAGNIOL-VILLARD
The flash size is 8MiB. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: remove empty at91_init_serial functionJoachim Eastwood
The real function is long gone and the empty one will generate warnings when configured without Atmel serial: arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: 'struct at91_uart_config' declared inside parameter list arch/arm/mach-at91/at91rm9200_devices.c:1176: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: fix typo in at91_pmc_base assembly declarationNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_matrix_baseJoachim Eastwood
at91_matrix_* macro's are used by at91_udc usb gadget driver, which can be built as module, therefore we need to export the variable containing matrix base address. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_pmc_baseJoachim Eastwood
After commit b55149529d26 (ARM: at91/PMC: make register base soc independent) building atmel_usba_udc as a module fails with following message ERROR: "at91_pmc_base" [drivers/usb/gadget/atmel_usba_udc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export symbol to allow driver to be built as a module again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-16ARM: at91: Export at91_ramc_baseJoachim Eastwood
After commit f363c40 (ARM: at91: make sdram/ddr register base soc independent) building at91_cf as a module fails with: ERROR: "at91_ramc_base" [drivers/pcmcia/at91_cf.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Export at91_ramc_base symbol to allow drivers using at91_ramc_* functions to be built as modules again. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> [nicolas.ferre@atmel.com: modify slightly commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit (git 2.34.1) at 2025-09-20 20:49:28 +0000