summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-30smsc75xx: fix mdio reads and writesSteve Glendinning
smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod <fillods@users.sf.net> Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30smsc75xx: mark link down on startup and let PHY interrupt deal with carrier ↵Steve Glendinning
changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: remove PHY polling from atl1c_change_mtuHuang, Xiong
PHY polling code for FPGA is considered in every MDIO R/W API. no need to add additional code to atl1c_change_mtu. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: David Liu <dwliu@qca.qaulcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: Disable L0S when no cable linkHuang, Xiong
L0S might be unstable if no cable link, only enable it when link up. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: do MAC-reset when PHY link downHuang, Xiong
There may be tx-skbs still pending in HW when PHY link down. Reset MAC will make the DMA engine go to the start point. and release all pending skbs. Note: Reset MAC will clear any interrupt status and mask. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: cancel task when interface closedHuang, Xiong
common_task might be running while close routine is called, wait/cancel it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: enlarge L1 response waiting timerHuang, Xiong
The hardware incorrectly process L0S/L1 entrance if the chipset/root response after specific/shorter timer and cause system hang. Enlarge the timeout value to avoid this issue. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: refine mac address related codeHuang, Xiong
On some platform with EEPROM/OTP existing, the BIOS could overwrite a new MAC address for the NIC. so, the permanent mac address should be from BIOS. the address is restored when driver removing. Voltage raising isn't applicable for l1d. Replace swab32 with htonl for big/little endian platform. related Registers are refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: remove code of closing register writable attributionHuang, Xiong
The Close-action is done by atl1c_reset_pcie, remove it from atl1c_get_permanent_address. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: clear WoL status when reset pcieHuang, Xiong
WoL status is read-clear and should be cleared when in S0 status. putting it in atl1c_reset_pcie is more suitable than in atl1c_get_permanent_address. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: add PHY link event(up/down) patchHuang, Xiong
On some platforms the PHY settings need to change depending on the cable link status to get better stability. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: add workaround for issue of bit INTX-disable for MSI interruptHuang, Xiong
All supported devices have one issue that msi interrupt doesn't assert if pci command register bit (PCI_COMMAND_INTX_DISABLE) is set. Add workaround in drivers/pci/quirks.c Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30Merge branch 'tipc_net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
2012-04-30bnx2x: remove some bloatEric Dumazet
Before doing skb->head_frag work on bnx2x driver, I found too much stuff was inlined in bnx2x/bnx2x_cmn.h for no good reason and made my work not very easy. Move some big functions out of this include file to the respective .c file. A lot of inline keywords are not needed at all in this huge driver. text data bss dec hex filename 490083 1270 56 491409 77f91 bnx2x/bnx2x.ko.before 484206 1270 56 485532 7689c bnx2x/bnx2x.ko Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30pch_gbe: reprogram multicast address register on resetRongQing.Li
The reset logic after a Rx FIFO overrun will clear the programmed multicast addresses. This patch fixes the issue by reprogramming the registers after the reset. The commit eefc48b ("pch_gbe: reprogram multicast address register on reset") tried to fix this problem, but it introduces unnecessary codes. In fact, all multicast addresses have been saved in netdev->mc, So we can call pch_gbe_set_multi() directly after reset_hw and reset_rx. This commit kills 50+ line codes Cc: Richard Cochran <richardcochran@gmail.com> Cc: Takahiro Shimizu <tshimizu818@gmail.com> Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30net: makes skb_splice_bits() aware of skb->head_fragEric Dumazet
__skb_splice_bits() can check if skb to be spliced has its skb->head mapped to a page fragment, instead of a kmalloc() area. If so we can avoid a copy of the skb head and get a reference on underlying page. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30tcp: makes tcp_try_coalesce aware of skb->head_fragEric Dumazet
TCP coalesce can check if skb to be merged has its skb->head mapped to a page fragment, instead of a kmalloc() area. We had to disable coalescing in this case, for performance reasons. We 'upgrade' skb->head as a fragment in itself. This reduces number of cache misses when user makes its copies, since a less sk_buff are fetched. This makes receive and ofo queues shorter and thus reduce cache line misses in TCP stack. This is a followup of patch "net: allow skb->head to be a page fragment" Tested with tg3 nic, with GRO on or off. We can see "TCPRcvCoalesce" counter being incremented. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30net: make GRO aware of skb->head_fragEric Dumazet
GRO can check if skb to be merged has its skb->head mapped to a page fragment, instead of a kmalloc() area. We 'upgrade' skb->head as a fragment in itself This avoids the frag_list fallback, and permits to build true GRO skb (one sk_buff and up to 16 fragments), using less memory. This reduces number of cache misses when user makes its copy, since a single sk_buff is fetched. This is a followup of patch "net: allow skb->head to be a page fragment" Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30tg3: provide frags as skb headEric Dumazet
This patch converts tg3 driver, one of our reference drivers, to use new build_skb() api in frag mode. Instead of using kmalloc() to allocate the memory block that will be used by build_skb() as skb->head, we use a page fragment. This is a followup of patch "net: allow skb->head to be a page fragment" This allows GRO, TCP coalescing, and splice() to be more efficient. Incidentally, this also removes SLUB slow path contention in kfree() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30net: allow skb->head to be a page fragmentEric Dumazet
skb->head is currently allocated from kmalloc(). This is convenient but has the drawback the data cannot be converted to a page fragment if needed. We have three spots were it hurts : 1) GRO aggregation When a linear skb must be appended to another skb, GRO uses the frag_list fallback, very inefficient since we keep all struct sk_buff around. So drivers enabling GRO but delivering linear skbs to network stack aren't enabling full GRO power. 2) splice(socket -> pipe). We must copy the linear part to a page fragment. This kind of defeats splice() purpose (zero copy claim) 3) TCP coalescing. Recently introduced, this permits to group several contiguous segments into a single skb. This shortens queue lengths and save kernel memory, and greatly reduce probabilities of TCP collapses. This coalescing doesnt work on linear skbs (or we would need to copy data, this would be too slow) Given all these issues, the following patch introduces the possibility of having skb->head be a fragment in itself. We use a new skb flag, skb->head_frag to carry this information. build_skb() is changed to accept a frag_size argument. Drivers willing to provide a page fragment instead of kmalloc() data will set a non zero value, set to the fragment size. Then, on situations we need to convert the skb head to a frag in itself, we can check if skb->head_frag is set and avoid the copies or various fallbacks we have. This means drivers currently using frags could be updated to avoid the current skb->head allocation and reduce their memory footprint (aka skb truesize). (thats 512 or 1024 bytes saved per skb). This also makes bpf/netfilter faster since the 'first frag' will be part of skb linear part, no need to copy data. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Maciej Żenczykowski <maze@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30forcedeth: add transmit timestamping supportWillem de Bruijn
Insert an skb_tx_timestamp call in both ndo_start_xmit routines Tested to work for the nv_start_xmit_optimized case Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30bnx2x: add transmit timestamping supportWillem de Bruijn
Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30e1000e: add transmit timestamping supportWillem de Bruijn
Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30e1000: add transmit timestamping supportWillem de Bruijn
Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victim ARM: 7403/1: tls: remove covert channel via TPIDRURW ARM: 7401/1: mm: Fix section mismatches ARM: OMAP: fix DMA vs memory ordering ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c ARM: 7398/1: l2x0: only write to debug registers on PL310 ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310 ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores
2012-04-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of SAS and SATA fixes; there are one or two longstanding bug fixes, but most of this is regression fixes." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] libfc: update mfs boundry checking [SCSI] Revert "[SCSI] libsas: fix sas port naming" [SCSI] libsas: fix false positive 'device attached' conditions [SCSI] libsas, libata: fix start of life for a sas ata_port [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready [SCSI] libsas: unify domain_device sas_rphy lifetimes [SCSI] libsas: fix sas_get_port_device regression [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work [SCSI] libata: Pass correct DMA device to scsi host [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
2012-04-30efi: Validate UEFI boot variablesMatthew Garrett
A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-30efi: Add new variable attributesMatthew Garrett
More recent versions of the UEFI spec have added new attributes for variables. Add them. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-30tipc: compress out gratuitous extra carriage returnsPaul Gortmaker
Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-30nfsd: fix nfs4recover.c printk format warningRandy Dunlap
Fix printk format warnings -- both items are size_t, so use %zu to print them. fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t' fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: linux-nfs@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-30mac80211: fix AP mode EAP tx for VLAN stationsFelix Fietkau
EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a handful more fixes for powerpc. The irq stuff are all regression fixes, and Gavin's patch is a simple compile fix." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: tty/serial/pmac_zilog: Fix "nobody cared" IRQ message powerpc/pseries: Rivet CONFIG_EEH for pSeries platform powerpc/irqdomain: Fix broken NR_IRQ references powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller
2012-04-30tcp: fix infinite cwnd in tcp_complete_cwr()Yuchung Cheng
When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30bpf jit: Let the powerpc jit handle negative offsetsJan Seiffert
Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30net: fix sk_sockets_allocated_read_positiveEric Dumazet
Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [<c0158b84>] __lock_acquire+0x284/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232c93>] __percpu_counter_add+0x58/0x7c [ 762.904542] [<c02cfde1>] sk_clone_lock+0x1e5/0x200 [ 762.904542] [<c0303ee4>] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [<c0315778>] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [<c031339c>] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [<c031615a>] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [<c0313f77>] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [<c03153bb>] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [<c02fc0c4>] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc652>] ip_local_deliver+0x41/0x45 [ 762.904542] [<c02fc4d1>] ip_rcv_finish+0x31a/0x33c [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc857>] ip_rcv+0x201/0x23e [ 762.904542] [<c02daa3a>] __netif_receive_skb+0x319/0x368 [ 762.904542] [<c02dac07>] netif_receive_skb+0x4e/0x7d [ 762.904542] [<c02dacf6>] napi_skb_finish+0x1e/0x34 [ 762.904542] [<c02db122>] napi_gro_receive+0x20/0x24 [ 762.904542] [<f85d1743>] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [<f85d3464>] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [<f85d3926>] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [<c02db228>] net_rx_action+0x90/0x160 [ 762.904542] [<c012a445>] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [<c019b4f4>] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [<c019b452>] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [<c02ce677>] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [<c0349914>] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] <Interrupt> [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [<c03055c0>] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [<c0347b73>] ? printk+0x18/0x1d [ 762.904542] [<c015873a>] valid_state+0x1f6/0x201 [ 762.904542] [<c0158816>] mark_lock+0xd1/0x1bb [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c015805d>] ? check_usage_forwards+0x77/0x77 [ 762.904542] [<c0158bf8>] __lock_acquire+0x2f8/0xc26 [ 762.904542] [<c0159b8e>] ? mark_held_locks+0x5d/0x7b [ 762.904542] [<c0159cf6>] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [<c0158dd4>] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c02cebc4>] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [<c02d178d>] ? __alloc_skb+0x76/0x100 [ 762.904542] [<c0305e8e>] sk_wmem_schedule+0x21/0x2d [ 762.904542] [<c0306370>] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [<c0306567>] tcp_sendmsg+0x18f/0x68b [ 762.904542] [<c031f3dc>] ? ip_fast_csum+0x30/0x30 [ 762.904542] [<c0320193>] inet_sendmsg+0x53/0x5a [ 762.904542] [<c02cb633>] sock_aio_write+0xd2/0xda [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c01a1017>] do_sync_write+0x9f/0xd9 [ 762.904542] [<c01a2111>] ? file_free_rcu+0x2f/0x2f [ 762.904542] [<c01a17a1>] vfs_write+0x8f/0xab [ 762.904542] [<c01a284d>] ? fget_light+0x75/0x7c [ 762.904542] [<c01a1900>] sys_write+0x3d/0x5e [ 762.904542] [<c0349ec9>] syscall_call+0x7/0xb [ 762.904542] [<c0340000>] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd942ce33 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Sined-off-by: Eric Dumazet <edumazet@google.com> Cc: Glauber Costa <glommer@parallels.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30bridge: Fix fatal typo in setup of multicast_querier_expiredHerbert Xu
Unfortunately it seems that I didn't properly test the case of an expired external querier in the recent multicast bridge series. The setup of the timer in that case is completely broken and leads to a NULL-pointer dereference. This patch fixes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30Merge branch 'master' of git://1984.lsi.us.es/netDavid S. Miller
2012-04-30l2tp: Add missing net/net/ip6_checksum.h include.David S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A simple fix for a recent regression in Synaptics driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - fix regression with "image sensor" trackpads
2012-04-30NFSv4.1: Use the correct hostname in the client identifier stringTrond Myklebust
We need to use the hostname of the process that created the nfs_client. That hostname is now stored in the rpc_client->cl_nodename. Also remove the utsname()->domainname component. There is no reason to include the NIS/YP domainname in a client identifier string. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-30SUNRPC: RPC client must use the current utsname hostname stringTrond Myklebust
Now that the rpc client is namespace aware, it needs to use the utsname of the process that created it instead of using the init_utsname. Both rpc_new_client and rpc_clone_client need to be fixed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
2012-04-30netfilter: xt_CT: fix wrong checking in the timeout assignment pathPablo Neira Ayuso
The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-04-30ipvs: kernel oops - do_ip_vs_get_ctlHans Schillstrom
Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by: "Ryan O'Hara" <rohara@redhat.com> Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-04-30ipvs: take care of return value from protocol init_netnsHans Schillstrom
ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-04-30ipvs: null check of net->ipvs in lblc(r) shedulersHans Schillstrom
Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-04-30ath6kl: Complete failed tx packet in ath6kl_htc_tx_from_queue()Vasanthakumar Thiagarajan
Return status of ath6kl_htc_tx_issue() is ignored in ath6kl_htc_tx_from_queue(), but failed tx packet is is not cleaned up. To fix memory leak in this case, call completion with error. Also, throw an error debug message when tx fails in ath6kl_sdio_write_async() due to shortage in bus request buffer. kvalo: change the error message to WARN_ON_ONCE() Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-30ath6kl: Update netstats for some of the tx failrues in ath6kl_data_tx()Vasanthakumar Thiagarajan
There are few cases where the tx skb is dropped but netstats is not updated, fix this. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-30drm/nv10/gpio: fix thinko in mask for gpio lines 2-9Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30nvc0/fb: shut up PMFB interrupt after the first occurrenceChristoph Bumiller
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-04-30drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvacBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 14:44:30 +0000