summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-14drm/nouveau/volt: save the voltage range we are able to setKarol Herbst
We shouldn't set voltages below the min or above the max voltage the gpu is able to set, so save the range for future lookups. Signed-off-by: Karol Herbst <karolherbst@gmail.de> Reviewed-by: Martin Peres <martin.peres@free.fr> Tested-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gm20b: add glitchless and DFS supportAlexandre Courbot
This patch adds support for advanced features supported by the Noise-Aware PLL of Maxwell. Glitchless switch allows the PL field to be updated without disabling the PLL first if the SYNC_MODE bit of the CFG register is set. More significantly, DFS allows the PLL to monitor the actual input voltage and to dynamically lower the output frequency accordingly. This allows the clock to be more tolerant of lower voltages. These improvements are only supported for Tegra speedos >= 1. Also add the voltage table that is suitable for GM20B's NAPLL. This change needs to be done atomically for the right voltages to be used by the clock driver. v2. Fix build on non-Tegra platforms Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: rename constructorAlexandre Courbot
Strip the _ prefix off the gk20a clock constructor. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: improve MNP programmingAlexandre Courbot
Split the MNP programming function into two functions for the cases where we allow sliding or not, instead of making it take a parameter for this. This results in less conditionals in the code and makes it easier to read. Also make the MNP programming functions take the PLL parameters as arguments, and move bits of code to more relevant places (previous programming tended to be just-in-time, which added more conditionnals in the code). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: factorize n_lo computation codeAlexandre Courbot
Use a dedicated function instead of always calculating n_lo on the fly. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: parameterize PLL settingsAlexandre Courbot
Make functions manipulating PLL settings take them as an argument, instead of assuming we want to work on the copy in the gk20a_clk structure. This makes these functions more flexible, which we will need in GM20B. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: add and use MNP programming functionsAlexandre Courbot
Add relevant functions to work with the gk20a_pll structure and use them where they ought to be instead of directly manipulating registers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: use nvkm_ functions in slide()Alexandre Courbot
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: reorganize MNP calculation a bitAlexandre Courbot
Move variables declarations to their actual scope of use, and simplify code a bit. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: setup slide once during initAlexandre Courbot
Slide setup needs to be performed only once, during init. Also use the proper parameters for different clock speeds. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/clk/gk20a: properly protect macro argumentAlexandre Courbot
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/volt/gm20b: add support for vmin parameterAlexandre Courbot
Chips may be characterized for a minimum voltage. Support this extra parameter and select the appropriate minimum voltage for the detected GPU speedo. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/volt/gk20a: rename constructorAlexandre Courbot
Strip the _ prefix off the gk20a volt constructor. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/volt/gk20a: constify and name v_scaleAlexandre Courbot
Give a name to this constant so we at least get an idea of what it is for. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/volt/gk20a: make unused public functions staticAlexandre Courbot
Nobody else is using these, so make them private. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/tegra: fetch gpu_speedo_idAlexandre Courbot
The GPU speedo ID is required to select the right clk/volt parameters on GM20B. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/secboot: use nvkm_mc_enable/disable()Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/secboot: use nvkm_mc_intr_mask/unmask()Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc/gk104-: add pmu reset maskBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc/gf100-: support for masking interruptsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc/gt215: support for masking interruptsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc: support for temporarily masking interrupts from a specific ↵Ben Skeggs
device Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc: s/intr_mask/intr_stat/Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc: expose device enable/disable separately, as well as resetBen Skeggs
There are cases where subdevs need to perform additonal actions around the master reset, so we want to expost the operations separately. This commit also adds a flag to the NV_PMC_ENABLE bitfield definitions which allow skipping the automatic reset() called from core/subdev.c. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc: take nvkm_device as argument to public functionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/mc: allow construction of subclassed deviceBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/top: add function to lookup interrupt mask for a given deviceBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-14drm/nouveau/top: take nvkm_device as argument to public functionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-13dma-buf/sync_file: improve Kconfig description for Sync FilesGustavo Padovan
We've got a complaint saying that the description was quite obtuse and indeed it was. This patch tries to improve it. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-07-13MAINTAINERS: add entry for the Sync File FrameworkGustavo Padovan
Add Gustavo as maintainer for the Sync File Framework. Sumit is co-maintainer as he maintains drivers/dma-buf/. It also uses Sumit's tree as base. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-07-13drm/exynos: iommu: add support for ARM64 specific code for IOMMU glueMarek Szyprowski
This patch adds support for ARM 64bit architecture with IOMMU-DMA glue code, so Exynos DRM can be now used on Exynos 5433 with IOMMU enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: move ARM specific code to exynos_drm_iommu.hMarek Szyprowski
This patch moves all ARM 32bit DMA-mapping/IOMMU dependant code from exynos_drm_iommu.c to .h, to let it compile conditionally and prepare for adding support for other architectures/IOMMU glue code (like ARM 64bit with IOMMU-DMA glue). Later, when ARM 32bit and 64bit will be unified, this code can be removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: remove unused entries from exynos_drm_private strcutureMarek Szyprowski
This patch removes unused entries from exynos_drm_private strcuture. da_start/da_space_size were only used in drm_create_iommu_mapping() function and never set to other value than the defaults. Instead use default values directly in arm_iommu_create_mapping() call. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: add a check if all sub-devices have iommu controllerMarek Szyprowski
This patch adds a check if all devices belonging to Exynos DRM have the same dma_map_ops set. This is required to enable operation with IOMMU enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm/exynos: iommu: move dma_params configuration code to separate functionsMarek Szyprowski
Move code for managing DMA max segment size parameter to separate functions. This patch also replaces devm_kzalloc() with kzalloc() and adds proper kfree call. devm_kzalloc() cannot be used for dma_params structure, because it will be freed on driver remove not on device release. This means in case of Exynos DRM being compiled as module and loaded 2 times, a user-after-free issue will happen. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-13drm: Resurrect atomic rmfb codeDaniel Vetter
This was somehow lost between v3 and the merged version in Maarten's patch merged as: commit f2d580b9a8149735cbc4b59c4a8df60173658140 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Wed May 4 14:38:26 2016 +0200 drm/core: Do not preserve framebuffer on rmfb, v4. Actual code copied from Maarten's patch, but with the slight change to just use dev->mode_config.funcs->atomic_commit to decide whether to use the atomic path or not. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-24-git-send-email-daniel.vetter@ffwll.ch
2016-07-12drm/imx: parallel-display: check return code from of_get_drm_display_mode()Lothar Waßmann
of_get_drm_display_mode() may fail. Check its return code and bail out on error. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12gpu: ipu-v3: ipu-dc: don't bug out on invalid bus_formatPhilipp Zabel
If imx-drm is combined with a bridge or panel that requests an unsupported format, warn and use a default mapping instead of hanging the machine. The worst that can happen here are wrong colors. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: imx-tve: fix the error messageFabio Estevam
The error message should say "hsync" instead of "vsync" as we have just checked the "fsl,hsync-pin" property. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: imx-tve: remove unneeded 'or' operationFabio Estevam
There is no need for doing an extra 'or' operation when reading the return value from of_property_read_u32(). Just do a simple read instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: imx-tve: check the value returned by regulator_set_voltage()Fabio Estevam
regulator_set_voltage() may fail, so we better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: imx-ldb: check return code on panel attachLucas Stach
Check the return code on panel attach. Avoids a kernel crash later on if the attach failed. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: turn remaining container_of macros into inline functionsPhilipp Zabel
This allows the compiler to do type checking. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: store internal bus configuration in crtc statePhilipp Zabel
The internal bus configuration is imx-drm specific crtc state. Store it in imx_crtc_state and let the encoder atomic_check callbacks determine bus_flags, bus_format and the sync pins, possibly taking into account the mode and the connector display info. The custom imx_drm_encoder structure can be replaced again with drm_encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: remove empty mode_set encoder callbacksPhilipp Zabel
With atomic modeset support, these callbacks are optional. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 3: Advertise DRIVER_ATOMICLiu Ying
With all the beforehand phases and steps done, we can adverstise DRIVER_ATOMIC. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 2: Legacy callback fixupsLiu Ying
Now that we can use atomic configurations, all the legacy callbacks of CRTCs, encoders and connectors can be switched to the atomic version. For the imx-ldb driver, there is a clock parent setting mismatch bewteen ->enable and ->disable after the switch, so a fixup is added. For the imx-tve driver, since the encoder's callback ->dpms is replaced by ->disable, we need to move the setting for the IPU_CLK_EN bit(in register TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the relevant CRTC cannot be disabled correctly with a warning on DC stop timeout. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/bridge: dw-hdmi: Remove the legacy drm_connector_funcs structureLiu Ying
There is no one using the legacy drm_connector_funcs structure since the imx-drm has been converted to atomic, so we may remove it. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: atomic phase 3 step 1: Use atomic configurationLiu Ying
Replacing drm_crtc_helper_set_config() by drm_atomic_helper_set_config() and converting the suspend/resume operations to atomic make us be able to use atomic configurations. All of these allow us to remove the crtc_funcs->mode_set callback as it is no longer used. Also, change the plane_funcs->update/disable_plane callbacks from the transitional version to the atomic version. Furthermore, switching to the pure atomic version of set_config callback means that we may implement CRTC/plane atomic checks by using the new CRTC/plane states instead of the legacy ones and we may remove the private ipu_crtc->enabled state which was left there for the transitional atomic helpers in phase 1. Page flip is also switched to the atomic version. Last, the legacy function drm_helper_disable_unused_functions() is removed from ->load in order not to confuse the atomic driver. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-07-12drm/imx: Remove encoders' ->prepare callbacksLiu Ying
The main task of imx encoders' ->prepare callbacks is to set bus_format, bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named imx_encoder to cache them. The atomic encoder callback ->disable may replace ->prepare later, so let's remove ->prepare. Signed-off-by: Liu Ying <gnuiyl@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-11 20:13:06 +0000