summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable GFX deviceJoel Stanley
Enable the GFX device with a framebuffer memory region. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-3-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add GFX node to AST2600Joel Stanley
The GFX device is present in the AST2600 SoC. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220302024930.18758-2-tommy_huang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable virtual hubHoward Chiu
Enable Aspeed VHub for HID emulation Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23155E8A6193118544A7DBF3E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable video engineHoward Chiu
Enable video engine and reserve memory for it. Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23159B914BF7EF937FEDD2B5E61E9@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIOBrandon Wyman
The IBM Everest and Rainier systems have a GPIO line that goes to the power supplies. It has a dual function: 1) Fans Full Speed, and 2) Sync input history. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220421213638.1151193-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Add Nuvia DC-SCM BMCGraeme Gregory
Add initial version of device tree for Nuvia DC-SCM BMC which is equipped with Aspeed AST2600 BMC SoC. Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Link: https://lore.kernel.org/r/20220325190247.468079-1-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add sample averaging for ADM1278Potin Lai
set number of sample averaging to 128 for both PWR_AVG and VI_AVG Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add eeprom node on each sledPotin Lai
Add eeprom (24c26) on each sled for storing sled fru information. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: add pca9536 node on each sledPotin Lai
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41. P0: SLEDX_SWD_MUX P1: SLEDX_XRES_SWD_N P2: SLEDX_CLKREQ_N P3: SLEDX_PCIE_PWR_EN Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: update gpio0 line namesPotin Lai
Update GPIO line names based on DVT schematic Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: Enable mdio0 busPotin Lai
Enable mdio0 bus based on DVT schematic. TODO: Add Marvell 88E6191 Switch Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smcPotin Lai
Due to DVT schematic has stable spi signal, switch back to aspeed-smc driver for improving performance. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: bletchley: enable ehci0 device nodePotin Lai
Enable ehci0 node for USB2 host feature Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.Andrew Lunn
It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19ARM: dts: aspeed: Add USB2.0 device controller nodeNeal Liu
Add USB2.0 device controller(udc) node to device tree for AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220518062043.1075360-3-neal_liu@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19USB: serial: option: add Quectel BG95 modemCarl Yin(殷张成)
The BG95 modem has 3 USB configurations that are configurable via the AT command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem enumerate with the following interfaces, respectively: "modem": Diag + GNSS + Modem + Modem "ecm" : Diag + GNSS + Modem + ECM "rmnet": Diag + GNSS + Modem + QMI Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE) A detailed description of the USB configuration for each mode follows: +QCFGEXT: "usbnet","modem" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","ecm" ------------------------ T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +QCFGEXT: "usbnet","rmnet" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-05-18ptp: ocp: change sysfs attr group handlingJonathan Lemon
In the detach path, the driver calls sysfs_remove_group() for the groups it believes has been registered. However, if the group was never previously registered, then this causes a splat. Instead, compute the groups that should be registered in advance, and then call sysfs_create_groups(), which registers them all at once. Update the error handling appropriately. Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating") Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net/mlx5: fix multiple definitions of mlx5_lag_mpesw_init / ↵Jakub Kicinski
mlx5_lag_mpesw_cleanup static inline is needed in the header. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220518183022.2034373-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge tag 'amd-drm-next-5.19-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-18: amdgpu: - Misc code cleanups - Additional SMU 13.x enablement - Smartshift fixes - GFX11 fixes - Support for SMU 13.0.4 - SMU mutex fix - Suspend/resume fix amdkfd: - static checker fix - Doorbell/MMIO resource handling fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518205621.5741-1-alexander.deucher@amd.com
2022-05-19Merge tag 'amd-drm-fixes-5.18-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-18: amdgpu: - Suspend/resume regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518202045.9123-1-alexander.deucher@amd.com
2022-05-19ARM: dts: aspeed-g4: Set spi-max-frequency for all flashesTao Ren
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC controller to ensure the clock frequency is calculated correctly. Suggested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Enable Dual SPI RX transfersCédric Le Goater
All these controllers support at least Dual SPI. Update the DTs. Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllersCédric Le Goater
This is compatible with the current driver and addresses issues when running 'make dt_binding_check'. Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-19ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1Howard Chiu
Since mac0/1 and mac2/3 are physically located on different die, they have different properties by nature, which is mac0/1 has smaller delay step. The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid' which enables the RX interface delay from the PHY chip. Refer page 45 of SDK User Guide v08.00 https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB") Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com> Link: https://lore.kernel.org/r/SG2PR06MB23152A548AAE81140B57DD69E6E09@SG2PR06MB2315.apcprd06.prod.outlook.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-05-18selftests: forwarding: fix missing backslashJoachim Wiberg
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to not be installed. Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18sfc: siena: Have a unique wrapper ifndef for efx channels headerSaeed Mahameed
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be EFX_SIENA_CHANNELS_H to avoid build system confusion. This fixes the following build break: drivers/net/ethernet/sfc/ptp.c:2191:28: error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’? 2191 | .copy = efx_copy_channel, Fixes: 6e173d3b4af9 ("sfc: Copy shared files needed for Siena (part 1)") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'octeon_ep-fix-the-error-handling-path-of-octep_request_irqs'Jakub Kicinski
Christophe says: ==================== octeon_ep: Fix the error handling path of octep_request_irqs() I send a small serie to ease review and because I'm sighly less confident with the 2nd patch. ==================== Link: https://lore.kernel.org/r/cover.1652819974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix irq releasing in the error handling path of octep_request_irqs()Christophe JAILLET
When taken, the error handling path does not undo correctly what has already been allocated. Introduce a new loop index, 'j', in order to simplify the error handling path and rewrite part of it. It is now written with the same logic and intermediate variables used when resources are allocated. This is much more straightforward. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix a memory leak in the error handling path of octep_request_irqs()Christophe JAILLET
'oct->non_ioq_irq_names' is not freed in the error handling path of octep_request_irqs(). Add the missing kfree(). Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Veerasenareddy Burru <vburru@marvell.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'adin-add-support-for-clock-output'Jakub Kicinski
Josua Mayer says: ==================== adin: add support for clock output This patch series adds support for configuring the two clock outputs of adin 1200 and 1300 PHYs. Certain network controllers require an external reference clock which can be provided by the PHY. One of the replies to v1 was asking why the common clock framework isn't used. Currently no PHY driver has implemented providing a clock to the network controller. Instead they rely on vendor extensions to make the appropriate configuration. For example ar8035 uses qca,clk-out-frequency - this patchset aimed to replicate the same functionality. Finally the 125MHz free-running clock is enabled in the device-tree for SolidRun i.MX6 SoMs, to support revisions 1.9 and later, where the original phy has been replaced with an adin 1300. To avoid introducing new warning messages during boot for SoMs before rev 1.9, the status field of the new phy node is disabled by default, and will be enabled by U-Boot on demand. ==================== Link: https://lore.kernel.org/r/20220517085143.3749-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9Josua Mayer
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300, add an entry for it next to the original. As Russell King pointed out, additional phy nodes cause warnings like: mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing To avoid this the new node has its status set to disabled. U-Boot will be modified to enable the appropriate phy node after probing. The existing ar8035 nodes have to stay enabled by default to avoid breaking existing systems when they update Linux only. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net: phy: adin: add support for clock outputJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18dt-bindings: net: adin: document phy clock output propertiesJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add DT properties to configure both pins. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. However SyncE should be configured dynamically at runtime, so it is explicitly omitted in this binding. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Reduce number of hardware offload retries from flowtable datapath which might hog system with retries, from Felix Fietkau. 2) Skip neighbour lookup for PPPoE device, fill_forward_path() already provides this and set on destination address from fill_forward_path for PPPoE device, also from Felix. 4) When combining PPPoE on top of a VLAN device, set info->outdev to the PPPoE device so software offload works, from Felix. 5) Fix TCP teardown flowtable state, races with conntrack gc might result in resetting the state to ESTABLISHED and the time to one day. Joint work with Oz Shlomo and Sven Auhagen. 6) Call dst_check() from flowtable datapath to check if dst is stale instead of doing it from garbage collector path. 7) Disable register tracking infrastructure, either user-space or kernel need to pre-fetch keys inconditionally, otherwise register tracking assumes data is already available in register that might not well be there, leading to incorrect reductions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown netfilter: nft_flow_offload: fix offload with pppoe + vlan net: fix dev_fill_forward_path with pppoe + bridge netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices netfilter: flowtable: fix excessive hw offload attempts after failure ==================== Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18drm/msm/dpu: handle pm_runtime_get_sync() errors in bind pathAbhinav Kumar
If there are errors while trying to enable the pm in the bind path, it will lead to unclocked access of hw revision register thereby crashing the device. This will not address why the pm_runtime_get_sync() fails but at the very least we should be able to prevent the crash by handling the error and bailing out earlier. changes in v2: - use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18clk: mediatek: use en_mask as a pure div_en_maskChun-Jie Chen
We no longer allow en_mask to be a combination of pll_en_bit and div_en_mask, so remove pll_en_bit(bit0) from en_mask to make en_mask a pure en_mask that only used for pll dividers. This commit continues the work done in commit 7cc4e1bbe300 ("clk: mediatek: Fix asymmetrical PLL enable and disable control") and commit f384c44754b7 ("clk: mediatek: Add configurable enable control to mtk_pll_data") to clean up en_mask(bit0) default setting. Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Link: https://lore.kernel.org/r/20220513073621.12923-1-mandyjh.liu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a small fix for a missing fifo time assigment for the head insertion case in mq-deadline" * tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block: block/mq-deadline: Set the fifo_time member also if inserting at head
2022-05-18clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCsAidan MacDonald
The TCU clock gate on X1000 wasn't requested by the driver and could be gated automatically later on in boot, which prevents timers from running and breaks PWM. Add a workaround to support old device trees that don't specify the "tcu" clock gate. In this case the kernel will print a warning and attempt to continue without the clock, which is wrong, but it could work if "clk_ignore_unused" is in the kernel arguments. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220412122750.279058-3-aidanmacdonald.0x0@gmail.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: mediatek: update compatible string for MT7986 ethsysSam Shih
Update compatible string of mt7986 ethsys clock driver to fit the devicetree bindings document. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20220509090939.845-2-sam.shih@mediatek.com Fixes: ec97d23c8e22 ("clk: mediatek: add mt7986 clock support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18Merge tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two small changes fixing issues from the 5.18 merge window: - Fix wrong ordering of a tracepoint (Dylan) - Fix MSG_RING on IOPOLL rings (me)" * tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block: io_uring: don't attempt to IOPOLL for MSG_RING requests io_uring: fix ordering of args in io_uring_queue_async_work
2022-05-18Merge tag 'audit-pr-20220518' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "A single audit patch to fix a problem where a task's audit_context was not being properly reset with io_uring" * tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
2022-05-18Merge tag 'selinux-pr-20220518' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "A single SELinux patch to fix an error path that was doing the wrong thing with respect to freeing memory" * tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix bad cleanup on error in hashtab_duplicate()
2022-05-18Merge branch 'arm/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The SoC bug fixes have calmed down sufficiently, there is one minor update for the MAINTAINERS file, and few bug fixes for dts descriptions: - Updates to the BananaPi R2-Pro (rk3568) dts to match production hardware rather than the prototype version. - Qualcomm sm8250 soundwire gets disabled on some machines to avoid crashes - A number of aspeed SoC specific fixes, addressing incorrect pin cotrol settings, some values in the romed8hm board, and a revert for an accidental removal of a DT node" * 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: omap: remove me as a maintainer ARM: dts: aspeed: Add video engine to g6 ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi arm64: dts: qcom: sm8250: don't enable rx/tx macro by default arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro arm64: dts: rockchip: Change io-domains of bpi-r2-pro
2022-05-18selftests/bpf: Add missed ima_setup.sh in MakefileHangbin Liu
When build bpf test and install it to another folder, e.g. make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \ SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests The ima_setup.sh is missed in target folder, which makes test_ima failed. Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
2022-05-18Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull misc fixes from Al Viro: "vhost race fix and a percpu_ref_init-caused cgroup double-free fix. The latter had manifested as buggered struct mount refcounting - those are also using percpu data structures, but anything that does percpu allocations could be hit" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix double fget() in vhost_net_set_backend() percpu_ref_init(): clean ->percpu_count_ref on failure
2022-05-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull mlx5 fix from Michael Tsirkin: "One last minute fixup The patch has been on list for a while but as it was posted as part of a thread it was missed" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Use consistent RQT size
2022-05-18kunit: tool: Use qemu-system-i386 for i386 runsDavid Gow
We're currently using the x86_64 qemu for i386 builds. While this is not incorrect, it's probably more sensible to use the i386 one, which will at least fail properly if we accidentally were to build a 64-bit kernel. Signed-off-by: David Gow <davidgow@google.com> Tested-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-18drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotationsAbhinav Kumar
DRM_MODE_ROTATE_180 was previously marked as supported even for devices not supporting inline rotation. This is true because the SSPPs can always flip the image. After inline rotation support changes, this bit was removed and kms_rotation_crc IGT test starts skipping now whereas it was previously passing. Restore DRM_MODE_ROTATE_180 bit to the supported rotations list. Fixes: dabfdd89eaa92 ("add inline rotation support for sc7280") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/485928/ Link: https://lore.kernel.org/r/20220511222710.22394-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18drm/msm: don't free the IRQ if it was not requestedDmitry Baryshkov
As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/485422/ Link: https://lore.kernel.org/r/20220507010021.1667700-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-05-18drm/msm/dpu: limit writeback modes according to max_linewidthAbhinav Kumar
Writeback modes were being added according to mode_config.max_width but this is assigned to double of max_mixer_width. For compositors/clients using a single SSPP, this will fail the dpu_plane's atomic check as it checks for max_linewidth. Limit writeback modes according to max_linewidth to allow even compositors/clients which use only a single SSPP to use writeback. Fixes: 77b001acdcfeb ("drm/msm/dpu: add the writeback connector layer") Reported-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/486176/ Link: https://lore.kernel.org/r/20220513225959.19004-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
generated by cgit (git 2.34.1) at 2025-10-02 01:06:13 +0000