| Age | Commit message (Collapse) | Author |
|---|
|
This patch can fix two issues:
Issue 1:
In previous code, div may be overflow when setting clock frequency
as f_min. We can use DIV_ROUND_UP to fix this boundary related
issue.
Issue 2:
In previous code, we can not set the correct clock frequency when
div equals 0xff.
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Set byt rc residency counters high level as chv does by
default. We lose some accuracy on byt but we can do the calculation
without extra hw read on both platforms, as now they behave
identically in this respect.
v2: use ktime
v3: keep comparison u32 (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1489592584-10422-1-git-send-email-mika.kuoppala@intel.com
|
|
We have used cz timestamp register to gain a reference time wrt
to residency calculations. The residency counts are in cz clk ticks
(333Mhz clock) but for some reason the cz timestamp register gives
100us units. Perhaps for some other usage, the base-ten based values
are easier, but in residency calculations raw units would have been
the easiest.
As there is not much advantage of using base-ten clock through
a more costly punit access, take our reference times directly from
kernel clock.
v2: use ktime (Chris, Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Use intel_rc6_residency to get benefit for increased resolution
in byt/chv.
v2: output raw and time (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Vlv and chv residency counters are 40 bits in width.
With a control bit, we can choose between upper or lower
32 bit window into this counter.
Lets toggle this bit on and off on and read both parts.
As a result we can push the wrap from 13 seconds to 54
minutes.
v2: commit msg, loop readability, goto elimination (Chris)
v3: bug ref, divide outside runtime pm lock (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=94852
Reported-by: Len Brown <len.brown@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Change the granularity from milliseconds to microseconds
when returning rc6 residencies. This is in preparation
for increased resolution on some platforms.
v2: use 64bit div macro (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Plan is to make generic residency calculation utility
function for usage outside of sysfs. As a first step
move residency calculation into intel_pm.c
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The current suspend resume implementation is assuming register values are
kept when entering suspend, which is no longer the case with the
suspend-to-RAM on the sama5d2.
While at it, switch to the generic infrastructure to enter suspend mode
(drm_atomic_helper_suspend/resume()).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488371461-22243-1-git-send-email-boris.brezillon@free-electrons.com
|
|
lockdep doesn't like us taking the mm->mmap_sem inside the get_pages
callback for a couple of reasons. The straightforward deadlock:
[13755.434059] =============================================
[13755.434061] [ INFO: possible recursive locking detected ]
[13755.434064] 4.11.0-rc1-CI-CI_DRM_297+ #1 Tainted: G U
[13755.434066] ---------------------------------------------
[13755.434068] gem_userptr_bli/8398 is trying to acquire lock:
[13755.434070] (&mm->mmap_sem){++++++}, at: [<ffffffffa00c988a>] i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434096]
but task is already holding lock:
[13755.434098] (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560
[13755.434105]
other info that might help us debug this:
[13755.434108] Possible unsafe locking scenario:
[13755.434110] CPU0
[13755.434111] ----
[13755.434112] lock(&mm->mmap_sem);
[13755.434115] lock(&mm->mmap_sem);
[13755.434117]
*** DEADLOCK ***
[13755.434121] May be due to missing lock nesting notation
[13755.434126] 2 locks held by gem_userptr_bli/8398:
[13755.434128] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560
[13755.434135] #1: (&obj->mm.lock){+.+.+.}, at: [<ffffffffa00b887d>] __i915_gem_object_get_pages+0x1d/0x70 [i915]
[13755.434156]
stack backtrace:
[13755.434161] CPU: 3 PID: 8398 Comm: gem_userptr_bli Tainted: G U 4.11.0-rc1-CI-CI_DRM_297+ #1
[13755.434165] Hardware name: GIGABYTE GB-BKi7(H)A-7500/MFLP7AP-00, BIOS F4 02/20/2017
[13755.434169] Call Trace:
[13755.434174] dump_stack+0x67/0x92
[13755.434178] __lock_acquire+0x133a/0x1b50
[13755.434182] lock_acquire+0xc9/0x220
[13755.434200] ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434204] down_read+0x42/0x70
[13755.434221] ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434238] i915_gem_userptr_get_pages+0x5a/0x2e0 [i915]
[13755.434255] ____i915_gem_object_get_pages+0x25/0x60 [i915]
[13755.434272] __i915_gem_object_get_pages+0x59/0x70 [i915]
[13755.434288] i915_gem_fault+0x397/0x6a0 [i915]
[13755.434304] ? i915_gem_fault+0x1a1/0x6a0 [i915]
[13755.434308] ? __lock_acquire+0x449/0x1b50
[13755.434311] ? __lock_acquire+0x449/0x1b50
[13755.434315] ? vm_mmap_pgoff+0xa9/0xd0
[13755.434318] __do_fault+0x19/0x70
[13755.434321] __handle_mm_fault+0x863/0xe50
[13755.434325] handle_mm_fault+0x17f/0x370
[13755.434329] ? handle_mm_fault+0x40/0x370
[13755.434332] __do_page_fault+0x279/0x560
[13755.434336] do_page_fault+0xc/0x10
[13755.434339] page_fault+0x22/0x30
[13755.434342] RIP: 0033:0x7f5ab91b5880
[13755.434345] RSP: 002b:00007fff62922218 EFLAGS: 00010216
[13755.434348] RAX: 0000000000b74500 RBX: 00007f5ab7f81000 RCX: 0000000000000000
[13755.434352] RDX: 0000000000100000 RSI: 00007f5ab7f81000 RDI: 00007f5aba61c000
[13755.434355] RBP: 00007f5aba61c000 R08: 0000000000000007 R09: 0000000100000000
[13755.434359] R10: 000000000000037d R11: 00007f5ab91b5840 R12: 0000000000000001
[13755.434362] R13: 0000000000000005 R14: 0000000000000001 R15: 0000000000000000
and cyclic deadlocks:
[ 2566.458979] ======================================================
[ 2566.459054] [ INFO: possible circular locking dependency detected ]
[ 2566.459127] 4.11.0-rc1+ #26 Not tainted
[ 2566.459194] -------------------------------------------------------
[ 2566.459266] gem_streaming_w/759 is trying to acquire lock:
[ 2566.459334] (&obj->mm.lock){+.+.+.}, at: [<ffffffffa034bc80>] i915_gem_object_pin_pages+0x0/0xc0 [i915]
[ 2566.459605]
[ 2566.459605] but task is already holding lock:
[ 2566.459699] (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500
[ 2566.459814]
[ 2566.459814] which lock already depends on the new lock.
[ 2566.459814]
[ 2566.459934]
[ 2566.459934] the existing dependency chain (in reverse order) is:
[ 2566.460030]
[ 2566.460030] -> #1 (&mm->mmap_sem){++++++}:
[ 2566.460139] lock_acquire+0xfe/0x220
[ 2566.460214] down_read+0x4e/0x90
[ 2566.460444] i915_gem_userptr_get_pages+0x6e/0x340 [i915]
[ 2566.460669] ____i915_gem_object_get_pages+0x8b/0xd0 [i915]
[ 2566.460900] __i915_gem_object_get_pages+0x6a/0x80 [i915]
[ 2566.461132] __i915_vma_do_pin+0x7fa/0x930 [i915]
[ 2566.461352] eb_add_vma+0x67b/0x830 [i915]
[ 2566.461572] eb_lookup_vmas+0xafe/0x1010 [i915]
[ 2566.461792] i915_gem_do_execbuffer+0x715/0x2870 [i915]
[ 2566.462012] i915_gem_execbuffer2+0x106/0x2b0 [i915]
[ 2566.462152] drm_ioctl+0x36c/0x670 [drm]
[ 2566.462236] do_vfs_ioctl+0x12c/0xa60
[ 2566.462317] SyS_ioctl+0x41/0x70
[ 2566.462399] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2566.462477]
[ 2566.462477] -> #0 (&obj->mm.lock){+.+.+.}:
[ 2566.462587] __lock_acquire+0x1602/0x1790
[ 2566.462661] lock_acquire+0xfe/0x220
[ 2566.462893] i915_gem_object_pin_pages+0x4c/0xc0 [i915]
[ 2566.463116] i915_gem_fault+0x2c2/0x8c0 [i915]
[ 2566.463197] __do_fault+0x42/0x130
[ 2566.463276] __handle_mm_fault+0x92c/0x1280
[ 2566.463356] handle_mm_fault+0x1e2/0x440
[ 2566.463443] __do_page_fault+0x1c4/0x500
[ 2566.463529] do_page_fault+0xc/0x10
[ 2566.463613] page_fault+0x1f/0x30
[ 2566.463693]
[ 2566.463693] other info that might help us debug this:
[ 2566.463693]
[ 2566.463820] Possible unsafe locking scenario:
[ 2566.463820]
[ 2566.463918] CPU0 CPU1
[ 2566.463988] ---- ----
[ 2566.464068] lock(&mm->mmap_sem);
[ 2566.464143] lock(&obj->mm.lock);
[ 2566.464226] lock(&mm->mmap_sem);
[ 2566.464304] lock(&obj->mm.lock);
[ 2566.464378]
[ 2566.464378] *** DEADLOCK ***
[ 2566.464378]
[ 2566.464504] 1 lock held by gem_streaming_w/759:
[ 2566.464576] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500
[ 2566.464699]
[ 2566.464699] stack backtrace:
[ 2566.464801] CPU: 0 PID: 759 Comm: gem_streaming_w Not tainted 4.11.0-rc1+ #26
[ 2566.464881] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016
[ 2566.464983] Call Trace:
[ 2566.465061] dump_stack+0x68/0x9f
[ 2566.465144] print_circular_bug+0x20b/0x260
[ 2566.465234] __lock_acquire+0x1602/0x1790
[ 2566.465323] ? debug_check_no_locks_freed+0x1a0/0x1a0
[ 2566.465564] ? i915_gem_object_wait+0x238/0x650 [i915]
[ 2566.465657] ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
[ 2566.465749] lock_acquire+0xfe/0x220
[ 2566.465985] ? i915_sg_trim+0x1b0/0x1b0 [i915]
[ 2566.466223] i915_gem_object_pin_pages+0x4c/0xc0 [i915]
[ 2566.466461] ? i915_sg_trim+0x1b0/0x1b0 [i915]
[ 2566.466699] i915_gem_fault+0x2c2/0x8c0 [i915]
[ 2566.466939] ? i915_gem_pwrite_ioctl+0xce0/0xce0 [i915]
[ 2566.467030] ? __lock_acquire+0x642/0x1790
[ 2566.467122] ? __lock_acquire+0x642/0x1790
[ 2566.467209] ? debug_lockdep_rcu_enabled+0x35/0x40
[ 2566.467299] ? get_unmapped_area+0x1b4/0x1d0
[ 2566.467387] __do_fault+0x42/0x130
[ 2566.467474] __handle_mm_fault+0x92c/0x1280
[ 2566.467564] ? __pmd_alloc+0x1e0/0x1e0
[ 2566.467651] ? vm_mmap_pgoff+0x160/0x190
[ 2566.467740] ? handle_mm_fault+0x111/0x440
[ 2566.467827] handle_mm_fault+0x1e2/0x440
[ 2566.467914] ? handle_mm_fault+0x5d/0x440
[ 2566.468002] __do_page_fault+0x1c4/0x500
[ 2566.468090] do_page_fault+0xc/0x10
[ 2566.468180] page_fault+0x1f/0x30
[ 2566.468263] RIP: 0033:0x557895ced32a
[ 2566.468337] RSP: 002b:00007fffd6dd8a10 EFLAGS: 00010202
[ 2566.468419] RAX: 00007f659a4db000 RBX: 0000000000000003 RCX: 00007f659ad032da
[ 2566.468501] RDX: 0000000000000000 RSI: 0000000000100000 RDI: 0000000000000000
[ 2566.468586] RBP: 0000000000000007 R08: 0000000000000003 R09: 0000000100000000
[ 2566.468667] R10: 0000000000000001 R11: 0000000000000246 R12: 0000557895ceda60
[ 2566.468749] R13: 0000000000000001 R14: 00007fffd6dd8ac0 R15: 00007f659a4db000
By checking the status of the gup worker (serialized by the
obj->mm.lock) we can determine whether it is still active, has failed or
has succeeded. If the worker is still active (or failed), we know that
it cannot be bound and so we can skip taking struct_mutex (risking
potential recursion). As we check the worker status, we mark it to
discard any partial results, forcing us to restart on the next
get_pages.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Fixes: 1c8782dd313e ("drm/i915/userptr: Disallow wrapping GTT into a userptr")
Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup
Testcase: igt/gem_userptr_blits/dmabuf-sync
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315140150.19432-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Test runs on a ppc64 BE guest succeeded. linux/samples/statx/test-statx
program was executed on the following file types,
1. Regular file
2. Directory
3. device file
4. symlink
5. Named pipe
The test run also included invoking test-statx with the runtime options
provided in the main() function of test-statx.c
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
After commit e9afc746299d ("hwrng: geode - Use linux/io.h instead of
asm/io.h") the geode-rng driver uses devres with pci_dev->dev to keep
track of resources, but does not actually register a PCI driver. This
results in the following issues:
1. The driver leaks memory because the driver does not attach to a
device. The driver only uses the PCI device as a reference. devm_*()
functions will release resources on driver detach, which the geode-rng
driver will never do. As a result,
2. The driver cannot be reloaded because there is always a use of the
ioport and region after the first load of the driver.
Revert the changes made by e9afc746299d ("hwrng: geode - Use linux/io.h
instead of asm/io.h").
Cc: <stable@vger.kernel.org>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Fixes: 6e9b5e76882c ("hwrng: geode - Migrate to managed API")
Cc: Matt Mackall <mpm@selenic.com>
Cc: Corentin LABBE <clabbe.montjoie@gmail.com>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-geode@lists.infradead.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After commit 31b2a73c9c5f ("hwrng: amd - Migrate to managed API"), the
amd-rng driver uses devres with pci_dev->dev to keep track of resources,
but does not actually register a PCI driver. This results in the
following issues:
1. The message
WARNING: CPU: 2 PID: 621 at drivers/base/dd.c:349 driver_probe_device+0x38c
is output when the i2c_amd756 driver loads and attempts to register a PCI
driver. The PCI & device subsystems assume that no resources have been
registered for the device, and the WARN_ON() triggers since amd-rng has
already do so.
2. The driver leaks memory because the driver does not attach to a
device. The driver only uses the PCI device as a reference. devm_*()
functions will release resources on driver detach, which the amd-rng
driver will never do. As a result,
3. The driver cannot be reloaded because there is always a use of the
ioport and region after the first load of the driver.
Revert the changes made by 31b2a73c9c5f ("hwrng: amd - Migrate to managed
API").
Cc: <stable@vger.kernel.org>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Fixes: 31b2a73c9c5f ("hwrng: amd - Migrate to managed API").
Cc: Matt Mackall <mpm@selenic.com>
Cc: Corentin LABBE <clabbe.montjoie@gmail.com>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-geode@lists.infradead.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CCP driver generally uses a round-robin approach when
assigning operations to available CCPs. For the DMA engine,
however, the DMA mappings of the SGs are associated with a
specific CCP. When an IOMMU is enabled, the IOMMU is
programmed based on this specific device.
If the DMA operations are not performed by that specific
CCP then addressing errors and I/O page faults will occur.
Update the CCP driver to allow a specific CCP device to be
requested for an operation and use this in the DMA engine
support.
Cc: <stable@vger.kernel.org> # 4.9.x-
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out
to be perfectly accurate - there are various error paths that miss unlock
of the RTNL.
To fix those, change the locking a bit to not be conditional in all those
nl80211_prepare_*_dump() functions, but make those require the RTNL to
start with, and fix the buggy error paths. This also let me use sparse
(by appropriately overriding the rtnl_lock/rtnl_unlock functions) to
validate the changes.
Cc: stable@vger.kernel.org
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
No one is using the structure imx_drm_component, so let's remove the
definition to save several lines.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Allow the planes to use the PRG/PRE units as linear prefetchers when
possible. This improves DRAM efficiency a bit and reduces the chance
for display underflow when the memory subsystem is under load.
This does not yet support scanning out tiled buffers directly, as this
needs more work, but it already wires up the basic interaction between
imx-drm, the IPUv3 driver and the PRG and PRE drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
On i.MX6 QuadPlus the PRG needs to be clocked in order to pass
through the data access requests from the IDMAC. This call is a
no-op for other all other SoCs.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Using non-zero AXI IDs for anything other than the display channels
collides with the PRG AXI snooping, so only do this if there is no
PRG present.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The i.MX6 QuadPlus IPU needs to PRG unit to gain access to the
data bus. Make sure it is present and available to be used.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Document the valid compatible strings for the IPUv3.
On i.MX6 QuadPlus the IPU needs to know which PRG has to be
used for this IPU instance. Add a "fsl,prg" property containing
a phandle pointing to the correct PRG device.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This adds support for the i.MX6 QUadPlus PRG unit. It glues together the
IPU and the PRE units.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
v4: add missing ipu_soc->prg_priv
|
|
After negative guc fw selection we could leave guc
submission flag still turned on. Reorder some checks
to cover this case. While here, fix info message and
return early if there is no Guc.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
[tursulin: fixup bad alignment]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133741.150420-1-michal.wajdeczko@intel.com
|
|
This field is used to determine which kind of firmware the struct
describes (GuC/HuC) - the name does not reflect.
The enum used here have "type" in the name, so let's go with that.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com
|
|
Avoid adding to the waitqueue and reprobing the current vblank if the
caller is only querying the current vblank sequence and timestamp, where
we know that the wait would return immediately.
v2: Add CRTC identifier to debug messages
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>,
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-2-chris@chris-wilson.co.uk
|
|
On vblank instant-off systems, we can get into a situation where the cost
of enabling and disabling the vblank IRQ around a drmWaitVblank query
dominates. And with the advent of even deeper hardware sleep state,
touching registers becomes ever more expensive. However, we know that if
the user wants the current vblank counter, they are also very likely to
immediately queue a vblank wait and so we can keep the interrupt around
and only turn it off if we have no further vblank requests queued within
the interrupt interval.
After vblank event delivery, this patch adds a shadow of one vblank where
the interrupt is kept alive for the user to query and queue another vblank
event. Similarly, if the user is using blocking drmWaitVblanks, the
interrupt will be disabled on the IRQ following the wait completion.
However, if the user is simply querying the current vblank counter and
timestamp, the interrupt will be disabled after every IRQ and the user
will enabled it again on the first query following the IRQ.
v2: Mario Kleiner -
After testing this, one more thing that would make sense is to move
the disable block at the end of drm_handle_vblank() instead of at the
top.
Turns out that if high precision timestaming is disabled or doesn't
work for some reason (as can be simulated by echo 0 >
/sys/module/drm/parameters/timestamp_precision_usec), then with your
delayed disable code at its current place, the vblank counter won't
increment anymore at all for instant queries, ie. with your other
"instant query" patches. Clients which repeatedly query the counter
and wait for it to progress will simply hang, spinning in an endless
query loop. There's that comment in vblank_disable_and_save:
"* Skip this step if there isn't any high precision timestamp
* available. In that case we can't account for this and just
* hope for the best.
*/
With the disable happening after leading edge of vblank (== hw counter
increment already happened) but before the vblank counter/timestamp
handling in drm_handle_vblank, that step is needed to keep the counter
progressing, so skipping it is bad.
Now without high precision timestamping support, a kms driver must not
set dev->vblank_disable_immediate = true, as this would cause problems
for clients, so this shouldn't matter, but it would be good to still
make this robust against a future kms driver which might have
unreliable high precision timestamping, e.g., high precision
timestamping that intermittently doesn't work.
v3: Patch before coffee needs extra coffee.
Testcase: igt/kms_vblank
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>,
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
|
|
Tvrtko spotted a stale reference to b->lock (now b->rb_lock) so review
the comments and try to improve them in passing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315222259.1469-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.
Daniel's test case had:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
To make it more interesting, I changed it to:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.
Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.
runtime / (deadline - t) > dl_runtime / dl_period
There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:
runtime / (deadline - t) > dl_runtime / dl_deadline
We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".
After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
deadline
During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.
To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.
Reproducer:
--------------- %< ---------------
int main (int argc, char **argv)
{
int ret;
int flags = 0;
unsigned long l = 0;
struct timespec ts;
struct sched_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
ts.tv_sec = 0;
ts.tv_nsec = 2000 * 1000; /* 2 ms */
ret = sched_setattr(0, &attr, flags);
if (ret < 0) {
perror("sched_setattr");
exit(-1);
}
for(;;) {
/* XXX: you may need to adjust the loop */
for (l = 0; l < 150000; l++);
/*
* The ideia is to go to sleep right before the deadline
* and then wake up before the next period to receive
* a new replenishment.
*/
nanosleep(&ts, NULL);
}
exit(0);
}
--------------- >% ---------------
On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).
For instance:
f.c:
--------------- %< ---------------
int main (void)
{
for(;;);
}
--------------- >% ---------------
# gcc -o f f.c
# trace-cmd record -e sched:sched_switch \
-e syscalls:sys_exit_sched_setattr \
chrt -d --sched-runtime 490000000 \
--sched-deadline 500000000 \
--sched-period 1000000000 0 ./f
# trace-cmd report | grep "{pid of ./f}"
After setting parameters, the task is replenished and continue running
until being throttled:
f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0
The task is throttled after running 492318 ms, as expected:
f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0]
But then, the task is replenished 500719 ms after the first
replenishment:
<idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1]
Running for 490277 ms:
f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120]
Hence, in the first period, the task runs 2 * runtime, and that is a bug.
During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
It returns the number of vectors allocated when successful, so check for
a negative error only.
Fixes: 3bb434cd ("vmw_vmci: switch to pci_irq_alloc_vectors")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Loïc Yhuel <loic.yhuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Usually every parallel port will have a single pardev registered with
it. But ppdev driver is an exception. This userspace parallel port
driver allows to create multiple parrallel port devices for a single
parallel port. And as a result we were having a big warning like:
"sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'".
And with that many parallel port printers stopped working.
We have been using the minor number as the id field while registering
a parralel port device with a parralel port. But when there are
multiple parrallel port device for one single parallel port, they all
tried to register with the same name like 'pardev0.0' and everything
started failing.
Use an incremented index as the id instead of the minor number.
Fixes: 8b7d3a9d903e ("ppdev: use new parport device model")
Cc: stable <stable@vger.kernel.org> # v4.9+
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656
Bugzilla: https://bugs.archlinux.org/task/52322
Tested-by: James Feeney <james@nurealm.net>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Usually every parallel port will have a single pardev registered with
it. But ppdev driver is an exception. This userspace parallel port
driver allows to create multiple parrallel port devices for a single
parallel port. And as a result we were having a nice warning like:
"sysctl table check failed:
/dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists"
Use the same logic as used in parport_register_device() and register
the proc files only once for each parallel port.
Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem")
Cc: stable <stable@vger.kernel.org> # v4.4+
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656
Bugzilla: https://bugs.archlinux.org/task/52322
Tested-by: James Feeney <james@nurealm.net>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We hang if SIGKILL has been sent, but the task is stuck in down_read()
(after do_exit()), even though no task is doing down_write() on the
rwsem in question:
INFO: task libupnp:21868 blocked for more than 120 seconds.
libupnp D 0 21868 1 0x08100008
...
Call Trace:
__schedule()
schedule()
__down_read()
do_exit()
do_group_exit()
__wake_up_parent()
This bug has already been fixed for CONFIG_RWSEM_XCHGADD_ALGORITHM=y in
the following commit:
04cafed7fc19 ("locking/rwsem: Fix down_write_killable()")
... however, this bug also exists for CONFIG_RWSEM_GENERIC_SPINLOCK=y.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Niklas Cassel <niklass@axis.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d47996082f52 ("locking/rwsem: Introduce basis for down_write_killable()")
Link: http://lkml.kernel.org/r/1487981873-12649-1-git-send-email-niklass@axis.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
'calc_load_update' is accessed without any kind of locking and there's
a clear assumption in the code that only a single value is read or
written.
Make this explicit by using READ_ONCE() and WRITE_ONCE(), and avoid
unintentionally seeing multiple values, or having the load/stores
split.
Technically the loads in calc_global_*() don't require this since
those are the only functions that update 'calc_load_update', but I've
added the READ_ONCE() for consistency.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20170217120731.11868-3-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to
the pending sample window time on exit, setting the next update not
one window into the future, but two.
This situation on exiting NO_HZ is described by:
this_rq->calc_load_update < jiffies < calc_load_update
In this scenario, what we should be doing is:
this_rq->calc_load_update = calc_load_update [ next window ]
But what we actually do is:
this_rq->calc_load_update = calc_load_update + LOAD_FREQ [ next+1 window ]
This has the effect of delaying load average updates for potentially
up to ~9seconds.
This can result in huge spikes in the load average values due to
per-cpu uninterruptible task counts being out of sync when accumulated
across all CPUs.
It's safe to update the per-cpu active count if we wake between sample
windows because any load that we left in 'calc_load_idle' will have
been zero'd when the idle load was folded in calc_global_load().
This issue is easy to reproduce before,
commit 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")
just by forking short-lived process pipelines built from ps(1) and
grep(1) in a loop. I'm unable to reproduce the spikes after that
commit, but the bug still seems to be present from code review.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: commit 5167e8d ("sched/nohz: Rewrite and fix load-avg computation -- again")
Link: http://lkml.kernel.org/r/20170217120731.11868-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following warning can be triggered by hot-unplugging the CPU
on which an active SCHED_DEADLINE task is running on:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/sched.h:833 replenish_dl_entity+0x71e/0xc40
rq->clock_update_flags < RQCF_ACT_SKIP
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G B 4.11.0-rc1+ #24
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
<IRQ>
dump_stack+0x85/0xc4
__warn+0x172/0x1b0
warn_slowpath_fmt+0xb4/0xf0
? __warn+0x1b0/0x1b0
? debug_check_no_locks_freed+0x2c0/0x2c0
? cpudl_set+0x3d/0x2b0
replenish_dl_entity+0x71e/0xc40
enqueue_task_dl+0x2ea/0x12e0
? dl_task_timer+0x777/0x990
? __hrtimer_run_queues+0x270/0xa50
dl_task_timer+0x316/0x990
? enqueue_task_dl+0x12e0/0x12e0
? enqueue_task_dl+0x12e0/0x12e0
__hrtimer_run_queues+0x270/0xa50
? hrtimer_cancel+0x20/0x20
? hrtimer_interrupt+0x119/0x600
hrtimer_interrupt+0x19c/0x600
? trace_hardirqs_off+0xd/0x10
local_apic_timer_interrupt+0x74/0xe0
smp_apic_timer_interrupt+0x76/0xa0
apic_timer_interrupt+0x93/0xa0
The DL task will be migrated to a suitable later deadline rq once the DL
timer fires and currnet rq is offline. The rq clock of the new rq should
be updated. This patch fixes it by updating the rq clock after holding
the new rq's rq lock.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1488865888-15894-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Make the function get_user_bd_entry() static as it is not used outside of
arch/x86/mm/mpx.c
This fixes a sparse warning.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Ganapathi & Xinming are starting to take a more active role in the
mwifiex driver maintainership here onwards on account of organizational
changes.
CC: Xinming Hu <huxm@marvell.com>
CC: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
We manually init wakeup info, but we don't detach it on device removal.
This means that if we (for example) rmmod + modprobe the driver, the
device framework might return -EEXIST the second time, and we'll
complain in the logs:
[ 839.311881] mwifiex_pcie 0000:01:00.0: fail to init wakeup for mwifiex
AFAICT, there's no other negative effect.
But we can fix this by disabling wakeup on remove, similar to what a few
other drivers do (e.g., the power supply framework).
This code (and bug) has existed on SDIO for a while, but it got moved
around and enabled for PCIe with commit 853402a00823 ("mwifiex: Enable
WoWLAN for both sdio and pcie").
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
The mwifiex_dbg() log handler utilizes the struct device in
adapter->dev. Without it, it decides not to print anything.
As of commit 2e02b5814217 ("mwifiex: Allow mwifiex early access to device
structure"), we started assigning that pointer only after we finished
mwifiex_register() -- this effectively neuters any mwifiex_dbg() logging
done before this point.
Let's move the device assignment into mwifiex_register().
Fixes: 2e02b5814217 ("mwifiex: Allow mwifiex early access to device structure")
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
When PCIe FLR support was added, much of the remove/release code for
PCIe was migrated to ->down_dev(), but ->down_dev() is never called for
device removal. Let's refactor the cleanup to be done in both cases.
Also, drop the comments above mwifiex_cleanup_pcie(), because they were
clearly wrong, and it's better to have clear and obvious code than to
detail the code steps in comments anyway.
Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
The OF device table must be terminated, otherwise we'll be walking past it
and into areas unknown.
Fixes: 0cad855fbd08 ("auxdisplay: img-ascii-lcd: driver for simple ASCII...")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently ILK-BDW explicitly disable LP1+ watermarks from their
.init_clock_gating() hooks. Unfortunately that hook gets called way too
late since by that time we've already initialized all the watermark
state tracking which then gets out of sync with the hardware state.
We may eventually want to consider killing off the explicit LP1+
disable from .init_clock_gating(). In the meantime however, we can
avoid the problem by reordering the init sequence such that
intel_modeset_init_hw()->intel_init_clock_gating() gets called
prior to the hardware state takeover.
I suppose prior to the two stage watermark programming we were
magically saved by something that forced the watermarks to be
reprogrammed fully after .init_clock_gating() got called. But
now that no longer happens.
Note that the diff might look a bit odd as it kills off one
call of intel_update_cdclk(), but that's fine because
intel_modeset_init_hw() does the exact same thing. Previously
we just did it twice.
Actually even this new init sequence is pretty bogus as
.init_clock_gating() really should be called before any gem
hardware init since it can configure various clock gating
workarounds and whatnot that affect the GT side as well. Also
intel_modeset_init() really should get split up into better
defined init stages. Another "fun" detail is that
intel_modeset_gem_init() is where RPS/RC6 gets configured.
Why that is done from the display code is beyond me. I've
decided to leave all this be for now, and just try to fix
the init sequence enough for watermarks to work.
Cc: stable@vger.kernel.org
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: David Purton <dcpurton@marshwiggle.net>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96645
Fixes: ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220140443.30891-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315143158.31780-1-ville.syrjala@linux.intel.com
(cherry picked from commit 5be6e33400992d3450e1c8234a5af353e1560580)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When a station is asleep, the fw will set it as "asleep".
All queues that are used only by one station will be stopped by
the fw.
In pre-DQA mode this was relevant for aggregation queues. However,
in DQA mode a queue is owned by one station only, so all queues
will be stopped.
As a result, we don't expect to get filtered frames back to
mac80211 and don't have to maintain the entire pending_frames
state logic, the same way as we do in aggregations.
The correct behavior is to align DQA behavior with the aggregation
queue behaviour pre-DQA:
- Don't count pending frames.
- Let mac80211 know we have frames in these queues so that it can
properly handle trigger frames.
When a trigger frame is received, mac80211 tells the driver to send
frames from the queues using release_buffered_frames.
The driver will tell the fw to let frames out even if the station
is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
When we close a channel that has been rescinded, we will leak memory since
vmbus_teardown_gpadl() returns an error. Fix this so that we can properly
cleanup the memory allocated to the ring buffers.
Fixes: ccb61f8a99e6 ("Drivers: hv: vmbus: Fix a rescind handling bug")
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we cannot allocate memory for the channel, free the relid
associated with the channel.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without the patch, I always get a "BUG: spinlock bad magic" warning.
Fixes: 3716a49a81ba ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Waiting for release_event in all three drivers introduced issues on release
as on_reset() hook is not always called. E.g. if the device was never
opened we will never get the completion.
Move the waiting code to hvutil_transport_destroy() and make sure it is
only called when the device is open. hvt->lock serialization should
guarantee the absence of races.
Fixes: 5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue")
Fixes: 20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue")
Fixes: d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue")
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the recent introduction of per-channel tasklet, we need to update
the way we handle the 3 concurrency issues:
1. hv_process_channel_removal -> percpu_channel_deq vs.
vmbus_chan_sched -> list_for_each_entry(..., percpu_list);
2. vmbus_process_offer -> percpu_channel_enq/deq vs. vmbus_chan_sched.
3. vmbus_close_internal vs. the per-channel tasklet vmbus_on_event;
The first 2 issues can be handled by Stephen's recent patch
"vmbus: use rcu for per-cpu channel list", and the third issue
can be handled by calling tasklet_disable in vmbus_close_internal here.
We don't need the original hv_event_tasklet_disable/enable since we
now use per-channel tasklet instead of the previous per-CPU tasklet,
and actually we must remove them due to the side effect now:
vmbus_process_offer -> hv_event_tasklet_enable -> tasklet_schedule will
start the per-channel callback prematurely, cauing NULL dereferencing
(the channel may haven't been properly configured to run the callback yet).
Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The per-cpu channel list is now referred to in the interrupt
routine. This is mostly safe since the host will not normally generate
an interrupt when channel is being deleted but if it did then there
would be a use after free problem.
To solve, this use RCU protection on ther per-cpu list.
Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
