summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-03qed: Add iWARP protocol support in context allocationKalderon, Michal
When computing how much memory is required for the different hw clients iWARP protocol should be taken into account Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add error handlingKalderon, Michal
This patch introduces error handling for errors that occurred during connection establishment. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP implement disconnect flowsKalderon, Michal
This patch takes care of active/passive disconnect flows. Disconnect flows can be initiated remotely, in which case a async event will arrive from peer and indicated to qedr driver. These are referred to as exceptions. When a QP is destroyed, it needs to check that it's associated ep has been closed. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add active side connectKalderon, Michal
This patch implements the active side connect. Offload a connection, process MPA reply and send RTR. In some of the common passive/active functions, the active side will work in blocking mode. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add passive side connectKalderon, Michal
This patch implements the passive side connect. It addresses pre-allocating resources, creating a connection element upon valid SYN packet received. Calling upper layer and implementation of the accept/reject calls. Error handling is not part of this patch. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM add listener functions and initial SYN processingKalderon, Michal
This patch adds the ability to add and remove listeners and identify whether the SYN packet received is intended for iWARP or not. If a listener is not found the SYN packet is posted back to the chip. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: iWARP CM - setup a ll2 connection for handling SYN packetsKalderon, Michal
iWARP handles incoming SYN packets using the ll2 interface. This patch implements ll2 setup and teardown. Additional ll2 connections will be used in the future which are not part of this patch series. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Add iWARP support in ll2 connectionsKalderon, Michal
Add a new connection type for iWARP ll2 connections for setting correct ll2 filters and connection type to FW. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Rename some ll2 related definesKalderon, Michal
Make some names more generic as they will be used by iWARP too. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Implement iWARP initialization, teardown and qp operationsKalderon, Michal
This patch adds iWARP support for flows that have common code between RoCE and iWARP, such as initialization, teardown and qp setup verbs: create, destroy, modify, query. It introduces the iWARP specific files qed_iwarp.[ch] and iwarp_common.h Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03qed: Introduce iWARP personalityKalderon, Michal
iWARP personality introduced the need for differentiating in several places in the code whether we are RoCE, iWARP or either. This leads to introducing new macros for querying the personality. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03x86: kvm: mmu: make spte mmio mask more explicitPeter Feiner
Specify both a mask (i.e., bits to consider) and a value (i.e., pattern of bits that indicates a special PTE) for mmio SPTEs. On Intel, this lets us pack even more information into the (SPTE_SPECIAL_MASK | EPT_VMX_RWX_MASK) mask we use for access tracking liberating all (SPTE_SPECIAL_MASK | (non-misconfigured-RWX)) values. Signed-off-by: Peter Feiner <pfeiner@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-03x86: kvm: mmu: dead code thanks to access trackingPeter Feiner
The MMU always has hardware A bits or access tracking support, thus it's unnecessary to handle the scenario where we have neither. Signed-off-by: Peter Feiner <pfeiner@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-03Merge branch 'kvm-ppc-next' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending.
2017-07-03KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving codePaul Mackerras
This fixes a typo where the wrong loop index was used to index the kvmppc_xive_vcpu.queues[] array in xive_pre_save_scan(). The variable i contains the vcpu number; we need to index queues[] using j, which iterates from 0 to KVMPPC_XIVE_Q_COUNT-1. The effect of this bug is that things that save the interrupt controller state, such as "virsh dump", on a VM with more than 8 vCPUs, result in xive_pre_save_queue() getting called on a bogus queue structure, usually resulting in a crash like this: [ 501.821107] Unable to handle kernel paging request for data at address 0x00000084 [ 501.821212] Faulting instruction address: 0xc008000004c7c6f8 [ 501.821234] Oops: Kernel access of bad area, sig: 11 [#1] [ 501.821305] SMP NR_CPUS=1024 [ 501.821307] NUMA [ 501.821376] PowerNV [ 501.821470] Modules linked in: vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel kvm_hv nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc kvm tg3 ptp pps_core [ 501.822477] CPU: 3 PID: 3934 Comm: live_migration Not tainted 4.11.0-4.git8caa70f.el7.centos.ppc64le #1 [ 501.822633] task: c0000003f9e3ae80 task.stack: c0000003f9ed4000 [ 501.822745] NIP: c008000004c7c6f8 LR: c008000004c7c628 CTR: 0000000030058018 [ 501.822877] REGS: c0000003f9ed7980 TRAP: 0300 Not tainted (4.11.0-4.git8caa70f.el7.centos.ppc64le) [ 501.823030] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 501.823047] CR: 28022244 XER: 00000000 [ 501.823203] CFAR: c008000004c7c77c DAR: 0000000000000084 DSISR: 40000000 SOFTE: 1 [ 501.823203] GPR00: c008000004c7c628 c0000003f9ed7c00 c008000004c91450 00000000000000ff [ 501.823203] GPR04: c0000003f5580000 c0000003f559bf98 9000000000009033 0000000000000000 [ 501.823203] GPR08: 0000000000000084 0000000000000000 00000000000001e0 9000000000001003 [ 501.823203] GPR12: c00000000008a7d0 c00000000fdc1b00 000000000a9a0000 0000000000000000 [ 501.823203] GPR16: 00000000402954e8 000000000a9a0000 0000000000000004 0000000000000000 [ 501.823203] GPR20: 0000000000000008 c000000002e8f180 c000000002e8f1e0 0000000000000001 [ 501.823203] GPR24: 0000000000000008 c0000003f5580008 c0000003f4564018 c000000002e8f1e8 [ 501.823203] GPR28: 00003ff6e58bdc28 c0000003f4564000 0000000000000000 0000000000000000 [ 501.825441] NIP [c008000004c7c6f8] xive_get_attr+0x3b8/0x5b0 [kvm] [ 501.825671] LR [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] [ 501.825887] Call Trace: [ 501.825991] [c0000003f9ed7c00] [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] (unreliable) [ 501.826312] [c0000003f9ed7cd0] [c008000004c62ec4] kvm_device_ioctl_attr+0x64/0xa0 [kvm] [ 501.826581] [c0000003f9ed7d20] [c008000004c62fcc] kvm_device_ioctl+0xcc/0xf0 [kvm] [ 501.826843] [c0000003f9ed7d40] [c000000000350c70] do_vfs_ioctl+0xd0/0x8c0 [ 501.827060] [c0000003f9ed7de0] [c000000000351534] SyS_ioctl+0xd4/0xf0 [ 501.827282] [c0000003f9ed7e30] [c00000000000b8e0] system_call+0x38/0xfc [ 501.827496] Instruction dump: [ 501.827632] 419e0078 3b760008 e9160008 83fb000c 83db0010 80fb0008 2f280000 60000000 [ 501.827901] 60000000 60420000 419a0050 7be91764 <7d284c2c> 552a0ffe 7f8af040 419e003c [ 501.828176] ---[ end trace 2d0529a5bbbbafed ]--- Cc: stable@vger.kernel.org Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-07-03ALSA: hda/realtek - Fix typo of pincfg for Dell quirkShih-Yuan Lee (FourDollars)
The PIN number for Dell headset mode of ALC3271 is wrong. Fixes: fcc6c877a01f ("ALSA: hda/realtek - Support Dell headset mode for ALC3271") Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-03serial: exar: Add support for IOT2040 deviceJan Kiszka
This implements the setup of RS232 and the switch-over to RS485 or RS422 for the Siemens IOT2040. That uses an EXAR XR17V352 with external logic to switch between the different modes. The external logic is controlled via MPIO pins of the EXAR controller. Only pin 10 can be exported as GPIO on the IOT2040. It is connected to an LED. As the XR17V352 used on the IOT2040 is not equipped with an external EEPROM, it cannot present itself as IOT2040-variant via subvendor/ subdevice IDs. Thus, we have to check via DMI for the target platform. Co-developed with Sascha Weisenberger. Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03gpio-exar/8250-exar: Make set of exported GPIOs configurableJan Kiszka
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the rest is required to operate the UART. To allow modeling this case, expand the platform device data structure to specify a (consecutive) pin subset for exporting by the gpio-exar driver. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03platform: Accept const propertiesJan Kiszka
Aligns us with device_add_properties, the function we call. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03serial: exar: Factor out platform hooksJan Kiszka
This prepares the addition of IOT2040 platform support by preparing the needed setup and rs485_config hooks. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03gpio-exar/8250-exar: Rearrange gpiochip parenthoodJan Kiszka
Set the parent of the exar gpiochip to its platform device, like other gpiochips are doing it. In order to keep the relationship discoverable for ACPI systems, set the platform device companion to the PCI device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio: exar: Fix iomap requestJan Kiszka
The UART driver already maps the resource for us. Trying to do this here only fails and leaves us with a non-working device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cardsJan Kiszka
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03serial: uapi: Add support for bus terminationJan Kiszka
The Siemens IOT2040 comes with a RS485 interface that allows to enable or disable bus termination via software. Add a bit to the flags field of serial_rs485 that applications can set in order to request this feature from the hardware. This seems generic enough to add it for everyone. Existing driver will simply ignore it when set. Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-02Linux 4.12v4.12Linus Torvalds
2017-07-03kbuild: improve comments on KBUILD_SRCCao jin
Original comments is confusing on "OBJ directory", make it clear. Bonus: move comments close to what it wants to comment. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-03kbuild: create deterministic initramfs directory listingsBjørn Forsman
kbuild runs "find" on each entry in CONFIG_INITRAMFS_SOURCE that is a directory. The order of the file listing output by "find" matter for build reproducability, hence this patch applies "sort" to get deterministic results. Without this patch, two different machines with identical initramfs directory input may produce differing initramfs cpio archives (different hash) due to the different order of the files within the archive. Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-02moduleparam: fix doc: hwparam_irq configures an IRQSylvain 'ythier' Hitier
Signed-off-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-02bpf: fix to bpf_setsockopsLawrence Brakmo
Fixed build error due to misplaced "#ifdef CONFIG_INET" (moved 1 statement up). Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02SMB3: Enable encryption for SMB3.1.1Steve French
We were missing a capability flag for SMB3.1.1 Signed-off-by: Steve French <steve.french@primarydata.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-07-02parisc: Report SIGSEGV instead of SIGBUS when running out of stackHelge Deller
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-02parisc: use compat_sys_keyctl()Eric Biggers
Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Here's a final round of fixes for 4.12: - Fix misordered instructions in assembly code making kenel startup via UHB unreliable. - Fix special case of MADDF and MADDF emulation. - Fix alignment issue in address calculation in pm-cps on 64 bit. - Fix IRQ tracing & lockdep when rescheduling - Systems with MAARs require post-DMA cache flushes. The reordering fix and the MADDF/MSUBF fix have sat in linux-next for a number of days. The others haven't propagated from my pull tree to linux-next yet but all have survived manual testing and Imagination's automated test system and there are no pending bug reports" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Avoid accidental raw backtrace MIPS: Perform post-DMA cache flushes on systems with MAARs MIPS: Fix IRQ tracing & lockdep when rescheduling MIPS: pm-cps: Drop manual cache-line alignment of ready_count MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately MIPS: head: Reorder instructions missing a delay slot
2017-07-02Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fix from Russell King: "One final fix for 4.12 - Doug found a boot failure case triggered by requesting a non-even MB vmalloc size" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8685/1: ensure memblock-limit is pmd-aligned
2017-07-02acpi/nfit: Issue Start ARS to retrieve existing recordsToshi Kani
ACPI 6.2 defines in section 9.20.7.2 that the OSPM may call a Start ARS with Flags Bit [1] set upon receiving the 0x81 notification. Upon receiving the notification, the OSPM may decide to issue a Start ARS with Flags Bit [1] set to prepare for the retrieval of existing records and issue the Query ARS Status function to retrieve the records. Add support to call a Start ARS from acpi_nfit_uc_error_notify() with ND_ARS_RETURN_PREV_DATA set when HW_ERROR_SCRUB_ON is not set. Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-07-02powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8Thiago Jung Bauermann
On POWER9 SMT8 the 24x7 API returns two result elements for physical core and virtual CPU events and we need to add their counts to get the final result. Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Support v2 of the hypervisor APIThiago Jung Bauermann
POWER9 introduces a new version of the hypervisor API to access the 24x7 perf counters. The new version changed some of the structures used for requests and results. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Minor improvementsThiago Jung Bauermann
There's an H24x7_DATA_BUFFER_SIZE constant, so use it in init_24x7_request. There's also an HV_PERF_DOMAIN_MAX constant, so use it in h_24x7_event_init. This makes the comment above the check redundant, so remove it. In add_event_to_24x7_request, a statement is terminated with a comma instead of a semicolon. Fix it. In hv-24x7.h, improve comments in struct hv_24x7_result. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Fix return value of hcallsThiago Jung Bauermann
The H_GET_24X7_CATALOG_PAGE hcall can return a signed error code, so fix this in the code. The H_GET_24X7_DATA hcall can return a signed error code, so fix this in the code. Also, don't truncate it to 32 bit to use as return value for make_24x7_request. In case of error h_24x7_event_commit_txn passes that return value to generic code, so it should be a proper errno. The other caller of make_24x7_request is single_24x7_request, whose callers don't actually care which error code is returned so they are not affected by this change. Finally, h_24x7_get_value doesn't use the error code from single_24x7_request, so there's no need to store it. Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc-perf/hx-24x7: Don't log failed hcall twiceThiago Jung Bauermann
make_24x7_request already calls log_24x7_hcall if it fails, so callers don't have to do it again. In fact, since the latter is now only called from the former, there's no need for a separate log_24x7_hcall anymore so remove it. Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Properly iterate through resultsThiago Jung Bauermann
hv-24x7.h has a comment mentioning that result_buffer->results can't be indexed as a normal array because it may contain results of variable sizes, so fix the loop in h_24x7_event_commit_txn to take the variation into account when iterating through results. Another problem in that loop is that it sets h24x7hw->events[i] to NULL. This assumes that only the i'th result maps to the i'th request, but that is not guaranteed to be true. We need to leave the event in the array so that we don't dereference a NULL pointer in case more than one result maps to one request. We still assume that each result has only one result element, so warn if that assumption is violated. Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Fix off-by-one error in request_buffer checkThiago Jung Bauermann
request_buffer can hold 254 requests, so if it already has that number of entries we can't add a new one. Also, define constant to show where the number comes from. Fixes: e3ee15dc5d19 ("powerpc/perf/hv-24x7: Define add_event_to_24x7_request()") Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/perf/hv-24x7: Fix passing of catalog version numberThiago Jung Bauermann
H_GET_24X7_CATALOG_PAGE needs to be passed the version number obtained from the first catalog page obtained previously. This is a 64 bit number, but create_events_from_catalog truncates it to 32-bit. This worked on POWER8, but POWER9 actually uses the upper bits so the call fails with H_P3 because the hypervisor doesn't recognize the version. This patch also adds the hcall return code to the error message, which is helpful when debugging the problem. Fixes: 5c5cd7b50259 ("powerpc/perf/hv-24x7: parse catalog and populate sysfs with events") Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/mm: Enable ZONE_DEVICE on powerpcOliver O'Halloran
Flip the switch. Running around and screaming "IT'S ALIVE" is optional, but recommended. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/mm: Wire up hpte_removebolted for powernvAnton Blanchard
Adds support for removing bolted (i.e kernel linear mapping) mappings on powernv. This is needed to support memory hot unplug operations which are required for the teardown of DAX/PMEM devices. Reviewed-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/mm: Add devmap support for ppc64Oliver O'Halloran
Add support for the devmap bit on PTEs and PMDs for PPC64 Book3S. This is used to differentiate device backed memory from transparent huge pages since they are handled in more or less the same manner by the core mm code. Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/vmemmap: Add altmap supportOliver O'Halloran
Adds support to powerpc for the altmap feature of ZONE_DEVICE memory. An altmap is a driver provided region that is used to provide the backing storage for the struct pages of ZONE_DEVICE memory. In situations where large amount of ZONE_DEVICE memory is being added to the system the altmap reduces pressure on main system memory by allowing the mm/ metadata to be stored on the device itself rather in main memory. Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/vmemmap: Reshuffle vmemmap_free()Oliver O'Halloran
Removes an indentation level and shuffles some code around to make the following patch cleaner. No functional changes. Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02mm, x86: Add ARCH_HAS_ZONE_DEVICE to KconfigOliver O'Halloran
Currently ZONE_DEVICE depends on X86_64 and this will get unwieldly as new architectures (and platforms) get ZONE_DEVICE support. Move to an arch selected Kconfig option to save us the trouble. Cc: linux-mm@kvack.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-02powerpc/hugetlbfs: Export HPAGE_SHIFTOliver O'Halloran
Export it so it can be referenced inside a module. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-12 11:53:45 +0000