Age | Commit message (Collapse) | Author |
|
The EM05-G (RS) modem has 2 USB configurations that are configurable via
the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate
with the following interfaces, respectively:
"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem
The detailed description of the USB configuration for each mode as follows:
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0314 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0314 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however,
during code review, we found that bfq_pd_free() update 'bfqg->ref'
without holding the lock, which is problematic:
1) bfq_pd_free() triggered by removing cgroup is called asynchronously;
2) bfqq will grab bfqg reference, and exit bfqq will drop the reference,
which can concurrent with 1).
Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already
be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.
Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.
Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure the poking PGD is pinned for Xen PV as it requires it this
way
- Fixes for two resctrl races when moving a task or creating a new
monitoring group
- Fix SEV-SNP guests running under HyperV where MTRRs are disabled to
not return a UC- type mapping type on memremap() and thus cause a
serious slowdown
- Fix insn mnemonics in bioscall.S now that binutils is starting to fix
confusing insn suffixes
* tag 'x86_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: fix poking_init() for Xen PV guests
x86/resctrl: Fix event counts regression in reused RMIDs
x86/resctrl: Fix task CLOSID/RMID update race
x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix the EDAC device's confusion in the polling setting units
- Fix a memory leak in highbank's probing function
* tag 'edac_urgent_for_v6.2_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/highbank: Fix memory leak in highbank_mc_probe()
EDAC/device: Fix period calculation in edac_device_reset_delay_period()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a build failure with some versions of ld that have an odd version
string
- Fix incorrect use of mutex in the IMC PMU driver
Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and
Yang Yingliang.
* tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/hash: Make stress_hpt_timer_fn() static
powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
powerpc/boot: Fix incorrect version calculation issue in ld_version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Core: Fix an iommu-group refcount leak
- Fix overflow issue in IOVA alloc path
- ARM-SMMU fixes from Will:
- Fix VFIO regression on NXP SoCs by reporting IOMMU_CAP_CACHE_COHERENCY
- Fix SMMU shutdown paths to avoid device unregistration race
- Error handling fix for Mediatek IOMMU driver
* tag 'iommu-fixes-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
iommu/iova: Fix alloc iova overflows issue
iommu: Fix refcount leak in iommu_device_claim_dma_owner
iommu/arm-smmu-v3: Don't unregister on shutdown
iommu/arm-smmu: Don't unregister on shutdown
iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages"
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI hash randomization with KASAN (Sami Tolvanen)
- Check size of coreboot table entry and use flex-array
* tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Just one fix for modules by Nick"
* tag 'modules-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kallsyms: Fix scheduling with interrupts disabled in self-test
|
|
Pull cifs fixes from Steve French:
- memory leak and double free fix
- two symlink fixes
- minor cleanup fix
- two smb1 fixes
* tag '6.2-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix uninitialized memory read for smb311 posix symlink create
cifs: fix potential memory leaks in session setup
cifs: do not query ifaces on smb1 mounts
cifs: fix double free on failed kerberos auth
cifs: remove redundant assignment to the variable match
cifs: fix file info setting in cifs_open_file()
cifs: fix file info setting in cifs_query_path_info()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in the hisi_sas driver which only impact enterprise
style multi-expander and shared disk situations and no core changes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id
scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single fix to prevent building the pata_cs5535 driver with user mode
linux as it uses msr operations that are not defined with UML"
* tag 'ata-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_cs5535: Don't build on UML
|
|
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: userspace pm: create sockets for the right family
Before these patches, the Userspace Path Manager would allow the
creation of subflows with wrong families: taking the one of the MPTCP
socket instead of the provided ones and resulting in the creation of
subflows with likely not the right source and/or destination IPs. It
would also allow the creation of subflows between different families or
not respecting v4/v6-only socket attributes.
Patch 1 lets the userspace PM select the proper family to avoid creating
subflows with the wrong source and/or destination addresses because the
family is not the expected one.
Patch 2 makes sure the userspace PM doesn't allow the userspace to
create subflows for a family that is not allowed.
Patch 3 validates scenarios with a mix of v4 and v6 subflows for the
same MPTCP connection.
These patches fix issues introduced in v5.19 when the userspace path
manager has been introduced.
====================
Link: https://lore.kernel.org/r/20230112-upstream-net-20230112-netlink-v4-v6-v1-0-6a8363a221d2@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.
Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY
option has been set, the userspace PM would allow creating subflows
using IPv4 addresses, e.g. mapped in v6.
The kernel side of userspace PM will also accept creating subflows with
local and remote addresses having different families. Depending on the
subflow socket's family, different behaviours are expected:
- If AF_INET is forced with a v6 address, the kernel will take the last
byte of the IP and try to connect to that: a new subflow is created
but to a non expected address.
- If AF_INET6 is forced with a v4 address, the kernel will try to
connect to a v4 address (v4-mapped-v6). A -EBADF error from the
connect() part is then expected.
It is then required to check the given families can be accepted. This is
done by using a new helper for addresses family matching, taking care of
IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by
the in-kernel path-manager to use mixed IPv4 and IPv6 addresses.
While at it, a clear error message is now reported if there are some
conflicts with the families that have been passed by the userspace.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the caller specify the to-be-created subflow family.
For a given MPTCP socket created with the AF_INET6 family, the current
userspace PM can already ask the kernel to create subflows in v4 and v6.
If "plain" IPv4 addresses are passed to the kernel, they are
automatically mapped in v6 addresses "by accident". This can be
problematic because the userspace will need to pass different addresses,
now the v4-mapped-v6 addresses to destroy this new subflow.
On the other hand, if the MPTCP socket has been created with the AF_INET
family, the command to create a subflow in v6 will be accepted but the
result will not be the one as expected as new subflow will be created in
IPv4 using part of the v6 addresses passed to the kernel: not creating
the expected subflow then.
No functional change intended for the in-kernel PM where an explicit
enforcement is currently in place. This arbitrary enforcement will be
leveraged by other patches in a future version.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This lockdep splat says it better than I could:
================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
_raw_spin_lock+0x5c/0xc0
sch_direct_xmit+0x148/0x37c
__dev_queue_xmit+0x528/0x111c
ip6_finish_output2+0x5ec/0xb7c
ip6_finish_output+0x240/0x3f0
ip6_output+0x78/0x360
ndisc_send_skb+0x33c/0x85c
ndisc_send_rs+0x54/0x12c
addrconf_rs_timer+0x154/0x260
call_timer_fn+0xb8/0x3a0
__run_timers.part.0+0x214/0x26c
run_timer_softirq+0x3c/0x74
__do_softirq+0x14c/0x5d8
____do_softirq+0x10/0x20
call_on_irq_stack+0x2c/0x5c
do_softirq_own_stack+0x1c/0x30
__irq_exit_rcu+0x168/0x1a0
irq_exit_rcu+0x10/0x40
el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(_xmit_ETHER#2);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
3 locks held by kworker/1:3/179:
#0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34
Workqueue: events enetc_tx_onestep_tstamp
Call trace:
print_usage_bug.part.0+0x208/0x22c
mark_lock+0x7f0/0x8b0
__lock_acquire+0x7c4/0x1ce0
lock_acquire.part.0+0xe0/0x220
lock_acquire+0x68/0x84
_raw_spin_lock+0x5c/0xc0
netif_freeze_queues+0x5c/0xc0
netif_tx_lock+0x24/0x34
enetc_tx_onestep_tstamp+0x20/0x100
process_one_work+0x28c/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x11c
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If uhdlc_priv_tsa != 1 then utdm is not initialized.
And if ret != NULL then goto undo_uhdlc_init, where
utdm is dereferenced. Same if dev == NULL.
Found by Astra Linux on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm")
Signed-off-by: Esina Ekaterina <eesina@astralinux.ru>
Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a use-after-free that occurs in kfree_skb() called from
local_cleanup(). This could happen when killing nfc daemon (e.g. neard)
after detaching an nfc device.
When detaching an nfc device, local_cleanup() called from
nfc_llcp_unregister_device() frees local->rx_pending and decreases
local->ref by kref_put() in nfc_llcp_local_put().
In the terminating process, nfc daemon releases all sockets and it leads
to decreasing local->ref. After the last release of local->ref,
local_cleanup() called from local_release() frees local->rx_pending
again, which leads to the bug.
Setting local->rx_pending to NULL in local_cleanup() could prevent
use-after-free when local_cleanup() is called twice.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in kfree_skb()
Call Trace:
dump_stack_lvl (lib/dump_stack.c:106)
print_address_description.constprop.0.cold (mm/kasan/report.c:306)
kasan_check_range (mm/kasan/generic.c:189)
kfree_skb (net/core/skbuff.c:955)
local_cleanup (net/nfc/llcp_core.c:159)
nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172)
nfc_llcp_local_put (net/nfc/llcp_core.c:181)
llcp_sock_destruct (net/nfc/llcp_sock.c:959)
__sk_destruct (net/core/sock.c:2133)
sk_destruct (net/core/sock.c:2181)
__sk_free (net/core/sock.c:2192)
sk_free (net/core/sock.c:2203)
llcp_sock_release (net/nfc/llcp_sock.c:646)
__sock_release (net/socket.c:650)
sock_close (net/socket.c:1365)
__fput (fs/file_table.c:306)
task_work_run (kernel/task_work.c:179)
ptrace_notify (kernel/signal.c:2354)
syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278)
syscall_exit_to_user_mode (kernel/entry/common.c:296)
do_syscall_64 (arch/x86/entry/common.c:86)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106)
Allocated by task 4719:
kasan_save_stack (mm/kasan/common.c:45)
__kasan_slab_alloc (mm/kasan/common.c:325)
slab_post_alloc_hook (mm/slab.h:766)
kmem_cache_alloc_node (mm/slub.c:3497)
__alloc_skb (net/core/skbuff.c:552)
pn533_recv_response (drivers/nfc/pn533/usb.c:65)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671)
usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704)
tasklet_action_common.isra.0 (kernel/softirq.c:797)
__do_softirq (kernel/softirq.c:571)
Freed by task 1901:
kasan_save_stack (mm/kasan/common.c:45)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/genericdd.c:518)
__kasan_slab_free (mm/kasan/common.c:236)
kmem_cache_free (mm/slub.c:3809)
kfree_skbmem (net/core/skbuff.c:874)
kfree_skb (net/core/skbuff.c:931)
local_cleanup (net/nfc/llcp_core.c:159)
nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617)
nfc_unregister_device (net/nfc/core.c:1179)
pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846)
pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579)
usb_unbind_interface (drivers/usb/core/driver.c:458)
device_release_driver_internal (drivers/base/dd.c:1279)
bus_remove_device (drivers/base/bus.c:529)
device_del (drivers/base/core.c:3665)
usb_disable_device (drivers/usb/core/message.c:1420)
usb_disconnect (drivers/usb/core.c:2261)
hub_event (drivers/usb/core/hub.c:5833)
process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281)
worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423)
kthread (kernel/kthread.c:319)
ret_from_fork (arch/x86/entry/entry_64.S:301)
Fixes: 3536da06db0b ("NFC: llcp: Clean local timers and works when removing a device")
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Link: https://lore.kernel.org/r/20230111131914.3338838-1-jisoo.jang@yonsei.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.2
Pull MD fix from Song:
"It fixes an issue introduced by recent code refactor."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix incorrect declaration about claim_rdev in md_import_device
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here, just a collection of NVMe fixes and dropping a
wrong might_sleep() that static checkers tripped over but which isn't
valid"
* tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux:
MAINTAINERS: stop nvme matching for nvmem files
nvme: don't allow unprivileged passthrough on partitions
nvme: replace the "bool vec" arguments with flags in the ioctl path
nvme: remove __nvme_ioctl
nvme-pci: fix error handling in nvme_pci_enable()
nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
block: Drop spurious might_sleep() from blk_put_queue()
|
|
Pull io_uring fixes from Jens Axboe:
"A fix for a regression that happened last week, rest is fixes that
will be headed to stable as well. In detail:
- Fix for a regression added with the leak fix from last week (me)
- In writing a test case for that leak, inadvertently discovered a
case where we a poll request can race. So fix that up and mark it
for stable, and also ensure that fdinfo covers both the poll tables
that we have. The latter was an oversight when the split poll table
were added (me)
- Fix for a lockdep reported issue with IOPOLL (Pavel)"
* tag 'io_uring-6.2-2023-01-13' of git://git.kernel.dk/linux:
io_uring: lock overflowing for IOPOLL
io_uring/poll: attempt request issue after racy poll wakeup
io_uring/fdinfo: include locked hash table in fdinfo output
io_uring/poll: add hash if ready poll request can't complete inline
io_uring/io-wq: only free worker if it was allocated for creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Work around apparent firmware issue that made Linux reject MMCONFIG
space, which broke PCI extended config space (Bjorn Helgaas)
- Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a
PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas
Bulwahn)
* tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
x86/pci: Simplify is_mmconf_reserved() messages
PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
|
|
Clang emits a asan.module_ctor constructor to each object file
when KASAN is enabled, and these functions are indirectly called
in do_ctors. With CONFIG_CFI_CLANG, the compiler also emits a CFI
type hash before each address-taken global function so they can
pass indirect call checks.
However, in commit 0c3e806ec0f9 ("x86/cfi: Add boot time hash
randomization"), x86 implemented boot time hash randomization,
which relies on the .cfi_sites section generated by objtool. As
objtool is run against vmlinux.o instead of individual object
files with X86_KERNEL_IBT (enabled by default), CFI types in
object files that are not part of vmlinux.o end up not being
included in .cfi_sites, and thus won't get randomized and trip
CFI when called.
Only .vmlinux.export.o and init/version-timestamp.o are linked
into vmlinux separately from vmlinux.o. As these files don't
contain any functions, disable KASAN for both of them to avoid
breaking hash randomization.
Link: https://github.com/ClangBuiltLinux/linux/issues/1742
Fixes: 0c3e806ec0f9 ("x86/cfi: Add boot time hash randomization")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230112224948.1479453-2-samitolvanen@google.com
|
|
The memcpy() of the data following a coreboot_table_entry couldn't
be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it
easier to reason about, add an explicit flexible array member to struct
coreboot_device so the entire entry can be copied at once. Additionally,
validate the sizes before copying. Avoids this run-time false positive
warning:
memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/
Cc: Jack Rosenthal <jrosenth@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
|
|
kallsyms_on_each* may schedule so must not be called with interrupts
disabled. The iteration function could disable interrupts, but this
also changes lookup_symbol() to match the change to the other timing
code.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Link: https://lore.kernel.org/all/bug-216902-206035@https.bugzilla.kernel.org%2F/
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212251728.8d0872ff-oliver.sang@intel.com
Fixes: 30f3bb09778d ("kallsyms: Add self-test facility")
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This driver uses MSR functions that aren't implemented under UML.
Avoid building it to prevent tripping up allyesconfig.
e.g.
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr'
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the PMCR_EL0 reset value after the PMU rework
- Correctly handle S2 fault triggered by a S1 page table walk by not
always classifying it as a write, as this breaks on R/O memslots
- Document why we cannot exit with KVM_EXIT_MMIO when taking a write
fault from a S1 PTW on a R/O memslot
- Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1 before
it
- Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
- Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
- Documentation improvements
- Do not return host topology information from KVM_GET_SUPPORTED_CPUID"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Avoid deadlock by adding kvm->arch.xen.xen_lock leaf node lock
KVM: Ensure lockdep knows about kvm->lock vs. vcpu->mutex ordering rule
KVM: x86/xen: Fix potential deadlock in kvm_xen_update_runstate_guest()
KVM: x86/xen: Fix lockdep warning on "recursive" gpc locking
Documentation: kvm: fix SRCU locking order docs
KVM: x86: Do not return host topology information from KVM_GET_SUPPORTED_CPUID
KVM: nSVM: clarify recalc_intercepts() wrt CR8
MAINTAINERS: Remove myself as a KVM/arm64 reviewer
MAINTAINERS: Add Zenghui Yu as a KVM/arm64 reviewer
KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations
KVM: arm64: Convert FSC_* over to ESR_ELx_FSC_*
KVM: arm64: Document the behaviour of S1PTW faults on RO memslots
KVM: arm64: Fix S1PTW handling on RO memslots
KVM: arm64: PMU: Fix PMCR_EL0 reset value
|
|
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
open3 ("Same file open/close"):
proc stock no-pause
1 805603 814942 (+%1)
2 1054980 1054781 (-0%)
8 1544802 1822858 (+18%)
24 1191064 2199665 (+84%)
48 851582 1469860 (+72%)
96 609481 1427170 (+134%)
fstat2 ("Same file fstat"):
proc stock no-pause
1 3013872 3047636 (+1%)
2 4284687 4400421 (+2%)
8 3257721 5530156 (+69%)
24 2239819 5466127 (+144%)
48 1701072 5256609 (+209%)
96 1269157 6649326 (+423%)
Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):
proc stock patched patched
+nopause
24 2378041 2005501 5370335 (-15% / +125%)
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <tony.luck@intel.com> # ia64
Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There should be one error return when fail to fetch the perst reset.
Add the missing error return.
Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/1671433941-2037-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Normally we reject ECAM space unless it is reported as reserved in the E820
table or via a PNP0C02 _CRS method (PCI Firmware, r3.3, sec 4.1.2).
07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"), removes
E820 entries that correspond to EfiMemoryMappedIO regions because some
other firmware uses EfiMemoryMappedIO for PCI host bridge windows, and the
E820 entries prevent Linux from allocating BAR space for hot-added devices.
Some firmware doesn't report ECAM space via PNP0C02 _CRS methods, but does
mention it as an EfiMemoryMappedIO region via EFI GetMemoryMap(), which is
normally converted to an E820 entry by a bootloader or EFI stub. After
07eab0901ede, that E820 entry is removed, so we reject this ECAM space,
which makes PCI extended config space (offsets 0x100-0xfff) inaccessible.
The lack of extended config space breaks anything that relies on it,
including perf, VSEC telemetry, EDAC, QAT, SR-IOV, etc.
Allow use of ECAM for extended config space when the region is covered by
an EfiMemoryMappedIO region, even if it's not included in E820 or PNP0C02
_CRS.
Link: https://lore.kernel.org/r/ac2693d8-8ba3-72e0-5b66-b3ae008d539d@linux.intel.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216891
Fixes: 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Link: https://lore.kernel.org/r/20230110180243.1590045-3-helgaas@kernel.org
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reported-by: Yunying Sun <yunying.sun@intel.com>
Reported-by: Baowen Zheng <baowen.zheng@corigine.com>
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reported-by: Yang Lixiao <lixiao.yang@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156.
This commit introduced an init sequence from downstream DT [1] in the
driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for
this sequence:
/*
* The macro is used to define an initialization sequence. Each tuple
* is meant to program 'value' into phy register at 'offset' with 'delay'
* in us followed.
*/
Instead of corresponding to offsets into the phy register, the sequence
read by the downstream driver [2] is passed into ulpi_write [3] which
crafts the address-value pair into a new value and writes it into the
same register at USB_ULPI_VIEWPORT [4]. In other words, this init
sequence is programmed into the hardware in a totally different way than
downstream and is unlikely to achieve the desired result, if the hsphy
is working at all.
An alternative method needs to be found to write these init values at
the desired location. Fortunately mdm9607 did not land upstream yet [5]
and should have its compatible revised to use the generic one, instead
of a compatible that writes wrong data to the wrong registers.
[1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585
[2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183
[3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468
[4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418
[5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/
Reported-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rockchip_usb2phy_power_on()
The clk_disable_unprepare() should be called in the error handling of
rockchip_usb2phy_power_on().
Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
Remove that variable.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 07a2975c65f2 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113154637.1704116-1-maxime@cerno.tech
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- avoid a potential crash on the efi_subsys_init() error path
- use more appropriate error code for runtime services calls issued
after a crash in the firmware occurred
- avoid READ_ONCE() for accessing firmware tables that may appear
misaligned in memory
* tag 'efi-fixes-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: tpm: Avoid READ_ONCE() for accessing the event log
efi: rt-wrapper: Add missing include
efi: fix userspace infinite retry read efivars after EFI runtime services page fault
efi: fix NULL-deref in init error path
|
|
Pull documentation fixes from Jonathan Corbet:
"Three documentation fixes (or rather two and one warning):
- Sphinx 6.0 broke our configuration mechanism, so fix it
- I broke our configuration for non-Alabaster themes; Akira fixed it
- Deprecate Sphinx < 2.4 with an eye toward future removal"
* tag 'docs-6.2-fixes' of git://git.lwn.net/linux:
docs/conf.py: Use about.html only in sidebar of alabaster theme
docs: Deprecate use of Sphinx < 2.4.x
docs: Fix the docs build with Sphinx 6.0
|
|
To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to
insufficient speculative store bypass mitigation") inserts lfence
instructions after 1) initializing a stack slot and 2) spilling a
pointer to the stack.
However, this does not cover cases where a stack slot is first
initialized with a pointer (subject to sanitization) but then
overwritten with a scalar (not subject to sanitization because
the slot was already initialized). In this case, the second write
may be subject to speculative store bypass (SSB) creating a
speculative pointer-as-scalar type confusion. This allows the
program to subsequently leak the numerical pointer value using,
for example, a branch-based cache side channel.
To fix this, also sanitize scalars if they write a stack slot
that previously contained a pointer. Assuming that pointer-spills
are only generated by LLVM on register-pressure, the performance
impact on most real-world BPF programs should be small.
The following unprivileged BPF bytecode drafts a minimal exploit
and the mitigation:
[...]
// r6 = 0 or 1 (skalar, unknown user input)
// r7 = accessible ptr for side channel
// r10 = frame pointer (fp), to be leaked
//
r9 = r10 # fp alias to encourage ssb
*(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked
// lfence added here because of pointer spill to stack.
//
// Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor
// for no r9-r10 dependency.
//
*(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr
// 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID,
// store may be subject to SSB
//
// fix: also add an lfence when the slot contained a ptr
//
r8 = *(u64 *)(r9 - 8)
// r8 = architecturally a scalar, speculatively a ptr
//
// leak ptr using branch-based cache side channel:
r8 &= 1 // choose bit to leak
if r8 == 0 goto SLOW // no mispredict
// architecturally dead code if input r6 is 0,
// only executes speculatively iff ptr bit is 1
r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast)
SLOW:
[...]
After running this, the program can time the access to *(r7 + 0) to
determine whether the chosen pointer bit was 0 or 1. Repeat this 64
times to recover the whole address on amd64.
In summary, sanitization can only be skipped if one scalar is
overwritten with another scalar. Scalar-confusion due to speculative
store bypass can not lead to invalid accesses because the pointer
bounds deducted during verification are enforced using branchless
logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on
pointer arithmetic") for details.
Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks}
because speculative leaks are likely unexpected if these were enabled.
For example, leaking the address to a protected log file may be acceptable
while disabling the mitigation might unintentionally leak the address
into the cached-state of a map that is accessible to unprivileged
processes.
Fixes: 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Henriette Hofmeier <henriette.hofmeier@rub.de>
Link: https://lore.kernel.org/bpf/edc95bad-aada-9cfc-ffe2-fa9bb206583c@cs.fau.de
Link: https://lore.kernel.org/bpf/20230109150544.41465-1-gerhorst@cs.fau.de
|
|
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
syzbot reports an issue with overflow filling for IOPOLL:
WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
io_fill_cqe_req io_uring/io_uring.h:168 [inline]
io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly big update, but it's more or less expected, as
the first batch after holidays.
All changes (but for the last two last-minute fixes) have been stewed
in linux-next long enough, so it's fairly safe to take:
- PCM UAF fix in 32bit compat layer
- ASoC board-specific fixes for Intel, AMD, Medathek, Qualcomm
- SOF power management fixes
- ASoC Intel link failure fixes
- A series of fixes for USB-audio regressions
- CS35L41 HD-audio codec regression fixes
- HD-audio device-specific fixes / quirks
Note that one SPI patch has been taken in ASoC subtree mistakenly, and
the same fix is found in spi tree, but it should be OK to apply"
* tag 'sound-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Spectre x360 13-aw0xxx
ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets
ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC
ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list
ALSA: control-led: use strscpy in set_led_id()
ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format()
ASoC: dt-bindings: qcom,lpass-tx-macro: correct clocks on SC7280
ASoC: dt-bindings: qcom,lpass-wsa-macro: correct clocks on SM8250
ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE
ALSA: hda: cs35l41: Check runtime suspend capability at runtime_idle
ALSA: hda: cs35l41: Don't return -EINVAL from system suspend/resume
ASoC: fsl_micfil: Correct the number of steps on SX controls
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform
Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"
ALSA: usb-audio: More refactoring of hw constraint rules
ALSA: usb-audio: Relax hw constraints for implicit fb sync
ALSA: usb-audio: Make sure to stop endpoints before closing EPs
ALSA: hda - Enable headset mic on another Dell laptop with ALC3254
...
|
|
SourceForge.JP was renamed to OSDN in May 2015.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix assorted issues in the ARM cpufreq drivers and in the AMD
P-state driver.
Specifics:
- Fix cpufreq policy reference counting in amd-pstate to prevent it
from crashing on removal (Perry Yuan)
- Fix double initialization and set suspend-freq for Apple's cpufreq
driver (Arnd Bergmann, Hector Martin)
- Fix reading of "reg" property, update cpufreq-dt's blocklist and
update DT documentation for Qualcomm's cpufreq driver (Konrad
Dybcio, Krzysztof Kozlowski)
- Replace 0 with NULL in the Armada cpufreq driver (Miles Chen)
- Fix potential overflows in the CPPC cpufreq driver (Pierre Gondois)
- Update blocklist for the Tegra234 Soc cpufreq driver (Sumit Gupta)"
* tag 'pm-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: fix kernel hang issue while amd-pstate unregistering
cpufreq: armada-37xx: stop using 0 as NULL pointer
cpufreq: apple-soc: Switch to the lowest frequency on suspend
dt-bindings: cpufreq: cpufreq-qcom-hw: document interrupts
cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist
cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
cpufreq: qcom-hw: Fix reading "reg" with address/size-cells != 2
cpufreq: CPPC: Add u64 casts to avoid overflowing
cpufreq: apple: remove duplicate intializer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add one more ACPI IRQ override quirk, improve ACPI companion
lookup for backlight devices and add missing kernel command line
option values for backlight detection.
Specifics:
- Improve ACPI companion lookup for backlight devices in the cases
when there is more than one candidate ACPI device object (Hans de
Goede)
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede)
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan)"
* tag 'acpi-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of assorted fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
platform/x86/amd: Fix refcount leak in amd_pmc_probe
platform/x86: intel/pmc/core: Add Meteor Lake mobile support
platform/x86: simatic-ipc: add another model
platform/x86: simatic-ipc: correct name of a model
platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting
platform/x86: asus-wmi: Don't load fan curves without fan
platform/x86: asus-wmi: Ignore fan on E410MA
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
platform/surface: aggregator: Ignore command messages not intended for us
platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
|
|
Pull drm fixes from Dave Airlie:
"There is a bit of a post-holiday build up here I expect, small fixes
across the board, amdgpu and msm being the main leaders, with others
having a few. One code removal patch for nouveau:
buddy:
- benchmark regression fix for top-down buddy allocation
panel:
- add Lenovo panel orientation quirk
ttm:
- fix kernel oops regression
amdgpu:
- fix missing fence references
- fix missing pipeline sync fencing
- SMU13 fan speed fix
- SMU13 fix power cap handling
- SMU13 BACO fix
- Fix a possible segfault in bo validation error case
- Delay removal of firmware framebuffer
- Fix error when unloading
amdkfd:
- SVM fix when clearing vram
- GC11 fix for multi-GPU
i915:
- Reserve enough fence slot for i915_vma_unbind_vsync
- Fix potential use after free
- Reset engines twice in case of reset failure
- Use multi-cast registers for SVG Unit registers
msm:
- display:
- doc warning fixes
- dt attribs cleanups
- memory leak fix
- error handing in hdmi probe fix
- dp_aux_isr incorrect signalling fix
- shutdown path fix
- accel:
- a5xx: fix quirks to be a bitmask
- a6xx: fix gx halt to avoid 1s hang
- kexec shutdown fix
- fix potential double free
vmwgfx:
- drop rcu usage to make code more robust
virtio:
- fix use-after-free in gem handle code
nouveau:
- drop unused nouveau_fbcon.c"
* tag 'drm-fixes-2023-01-13' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm: Optimize drm buddy top-down allocation method
drm/ttm: Fix a regression causing kernel oops'es
drm/i915/gt: Cover rest of SVG unit MCR registers
drm/nouveau: Remove file nouveau_fbcon.c
drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
drm/amd/pm/smu13: BACO is supported when it's in BACO state
drm/amdkfd: Add sync after creating vram bo
drm/i915/gt: Reset twice
drm/amdgpu: fix pipeline sync v2
drm/vmwgfx: Remove rcu locks from user resources
drm/virtio: Fix GEM handle creation UAF
drm/amdgpu: Fixed bug on error when unloading amdgpu
drm/amd: Delay removal of the firmware framebuffer
drm/amdgpu: Fix potential NULL dereference
drm/i915: Fix potential context UAFs
drm/i915: Reserve enough fence slot for i915_vma_unbind_async
drm: Add orientation quirk for Lenovo ideapad D330-10IGL
drm/msm/a6xx: Avoid gx gbit halt during rpm suspend
drm/msm/adreno: Make adreno quirks not overwrite each other
drm/msm: another fix for the headless Adreno GPU
...
|