| Age | Commit message (Collapse) | Author |
|---|
|
Scenario:
* Multicast frame send from a BLA backbone (multiple nodes with
their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0
For multicast frames received via batman-adv broadcast packets the
originator of the broadcast packet is checked before decapsulating and
forwarding the frame to bat0 (batadv_bla_is_backbone_gw()->
batadv_recv_bcast_packet()). If it came from a node which shares the
same BLA backbone with us then it is not forwarded to bat0 to avoid a
loop.
When sending a multicast frame in a non-4-address batman-adv unicast
packet we are currently missing this check - and cannot do so because
the batman-adv unicast packet has no originator address field.
However, we can simply fix this on the sender side by only sending the
multicast frame via unicasts to interested nodes which do not share the
same BLA backbone with us. This also nicely avoids some unnecessary
transmissions on mesh side.
Note that no infinite loop was observed, probably because of dropping
via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still
utterly confuse switches/bridges, ICMPv6 duplicate address detection and
neighbor discovery and therefore leads to long delays before being able
to establish TCP connections, for instance. And it also leads to the Linux
bridge printing messages like:
"br-lan: received packet on eth1 with own address as source address ..."
Fixes: 2d3f6ccc4ea5 ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
With CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, a system would try to probe,
unregister and probe again a driver.
When ghes_edac is attempted to be loaded on a system which is not on
the safe platforms list, ghes_edac_register() would return early. The
unregister counterpart ghes_edac_unregister() would still attempt to
unregister and exit early at the refcount test, leading to the refcount
underflow below.
In order to not do *anything* on the unregister path too, reuse the
force_load parameter and check it on that path too, before fumbling with
the refcount.
ghes_edac: ghes_edac_register: entry
ghes_edac: ghes_edac_register: return -ENODEV
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 10 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xb9/0x100
Modules linked in:
CPU: 10 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #12
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
RIP: 0010:refcount_warn_saturate+0xb9/0x100
Code: 82 e8 fb 8f 4d 00 90 0f 0b 90 90 c3 80 3d 55 4c f5 00 00 75 88 c6 05 4c 4c f5 00 01 90 48 c7 c7 d0 8a 10 82 e8 d8 8f 4d 00 90 <0f> 0b 90 90 c3 80 3d 30 4c f5 00 00 0f 85 61 ff ff ff c6 05 23 4c
RSP: 0018:ffffc90000037d58 EFLAGS: 00010292
RAX: 0000000000000026 RBX: ffff88840b8da000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff8216b24f RDI: 00000000ffffffff
RBP: ffff88840c662e00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88840ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000800002211000 CR4: 00000000003506e0
Call Trace:
ghes_edac_unregister
ghes_remove
platform_drv_remove
really_probe
driver_probe_device
device_driver_attach
__driver_attach
? device_driver_attach
? device_driver_attach
bus_for_each_dev
bus_add_driver
driver_register
? bert_init
ghes_init
do_one_initcall
? rcu_read_lock_sched_held
kernel_init_freeable
? rest_init
kernel_init
ret_from_fork
...
ghes_edac: ghes_edac_unregister: FALSE, refcount: -1073741824
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200911164950.GB19320@zn.tnic
|
|
Commit
b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()")
didn't clear all the information from the scanned system and, more
specifically, left ghes_hw.num_dimms to its previous value. On a
second load (CONFIG_DEBUG_TEST_DRIVER_REMOVE=y), the driver would use
the leftover num_dimms value which is not 0 and thus the 0 check in
enumerate_dimms() will get bypassed and it would go directly to the
pointer deref:
d = &hw->dimms[hw->num_dimms];
which is, of course, NULL:
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #7
Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
RIP: 0010:enumerate_dimms.cold+0x7b/0x375
Reset the whole ghes_hw on driver unregister so that no stale values are
used on a second system scan.
Fixes: b972fdba8665 ("EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()")
Cc: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200911164817.GA19320@zn.tnic
|
|
When NVME_TCP is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32C
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NVME_TCP [=y] && INET [=y] && BLK_DEV_NVME [=y]
The reason is that NVME_TCP selects CRYPTO_CRC32C without depending on or
selecting CRYPTO while CRYPTO_CRC32C is subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 79fd751d61aa ("nvme: tcp: selects CRYPTO_CRC32C for nvme-tcp")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The write zeros command does not work with 4k range.
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00000200
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 5c 61 5c b0 96 21 1b 5e 85 0c 07 32 9c 8c eb 3c |\a\..!.^...2...<|
00000010 4a a2 06 ca 67 15 2d 8e 29 8d a8 a0 7e 46 8c 62 |J...g.-.)...~F.b|
00000020 bb 4c 6c c1 6b f5 ae a5 e4 a9 bc 93 4f 60 ff 7a |.Ll.k.......O`.z|
Reported-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Tested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Make path to bench_ringbufs.c just a text, not a special link.
Fixes: 97abb2b39682 ("docs/bpf: Add BPF ring buffer design notes")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200915005031.2748397-1-andriin@fb.com
|
|
A discard request that writes zeros using the global kernel internal
ZERO_PAGE will fail for machines with more than 2GB of memory due to the
location of the ZERO_PAGE.
Fix this by using a driver owned global zero page allocated with GFP_DMA
flag set.
Fixes: 28b841b3a7cb ("s390/dasd: Add discard support for FBA devices")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For AF_XDP sockets, there was a discrepancy between the number of of
pinned pages and the size of the umem region.
The size of the umem region is used to validate the AF_XDP descriptor
addresses. The logic that pinned the pages covered by the region only
took whole pages into consideration, creating a mismatch between the
size and pinned pages. A user could then pass AF_XDP addresses outside
the range of pinned pages, but still within the size of the region,
crashing the kernel.
This change correctly calculates the number of pages to be
pinned. Further, the size check for the aligned mode is
simplified. Now the code simply checks if the size is divisible by the
chunk size.
Fixes: bbff2f321a86 ("xsk: new descriptor addressing scheme")
Reported-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200910075609.7904-1-bjorn.topel@gmail.com
|
|
In fl_set_erspan_opt(), all bits of erspan md was set 1, as this
function is also used to set opt MASK. However, when setting for
md->u.index for opt VALUE, the rest bits of the union md->u will
be left 1. It would cause to fail the match of the whole md when
version is 1 and only index is set.
This patch is to fix by initializing with 0 before setting erspan
md->u.
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Xin Long says:
====================
net: improve vxlan option process in net_sched and lwtunnel
This patch is to do some mask when setting vxlan option in net_sched
and lwtunnel, so that only available bits can be set on vxlan md gbp.
This would help when users don't know exactly vxlan's gbp bits, and
avoid some mismatch because of some unavailable bits set by users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So do the mask when set it in lwtunnel, as it does in act_tunnel_key and
cls_flower.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So we'd better do the mask when set it in act_tunnel_key and cls_flower.
Otherwise, when users don't know these bits, they may configure with a
value which can never be matched.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.
Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One of the recent lockdep fixes introduced a bug that breaks the
search ioctl, which is used by some applications (bees, compsize). The
patch made it to stable trees so we need this fixup to make it work
again"
* tag 'for-5.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix wrong address when faulting in pages in the search ioctl
|
|
Add test that a sibling with leader sampling doesn't have its period
cleared.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200912025655.1337192-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If events in a group explicitly set a frequency or period with leader
sampling, don't disable the samples on those events.
Prior to 5.8:
perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S'
would clear the attributes then apply the config terms. In commit
5f34278867b7 leader sampling configuration was moved to after applying the
config terms, in the example, making the instructions' event have its period
cleared.
This change makes it so that sampling is only disabled if configuration
terms aren't present.
Committer testing:
Before:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ]
#
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
After:
# perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ]
# perf evlist -v
cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1
#
Fixes: 5f34278867b7 ("perf evlist: Move leader-sampling configuration")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes from:
645f08975f49441b ("net: Fix some comments")
That don't cause any changes in tooling, its just a typo fix.
This silences this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
15e9e35cd1dec2bc ("KVM: MIPS: Change the definition of kvm type")
004a01241c5a0d37 ("arm64/x86: KVM: Introduce steal-time cap")
That do not result in any change in tooling, as the additions are not
being used in any table generator.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hauke Mehrtens says:
====================
net: lantiq: Fix bugs in NAPI handling
This fixes multiple bugs in the NAPI handling.
Changes since:
v1:
- removed stable tag from "net: lantiq: use netif_tx_napi_add() for TX NAPI"
- Check the NAPI budged in "net: lantiq: Use napi_complete_done()"
- Add extra fix "net: lantiq: Disable IRQs only if NAPI gets scheduled"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The napi_schedule() call will only schedule the NAPI if it is not
already running. To make sure that we do not deactivate interrupts
without scheduling NAPI only deactivate the interrupts in case NAPI also
gets scheduled.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use napi_complete_done() and activate the interrupts when this function
returns true. This way the generic NAPI code can take care of activating
the interrupts.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netif_tx_napi_add() should be used for NAPI in the TX direction instead
of the netif_napi_add() function.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The call to netif_wake_queue() when the TX descriptors were freed was
missing. When there are no TX buffers available the TX queue will be
stopped, but it was not started again when they are available again,
this is fixed in this patch.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before:
$ perf record -c 10000 --pfm-events=cycles:period=77777
Would yield a cycles event with period=10000, instead of 77777.
the event string and perf record initializing the event.
This was due to an ordering issue between libpfm4 parsing
events with attr->sample_period != 0 by the time
intent of the author.
perf_evsel__config() is invoked. This seems to have been the
This patch fixes the problem by preventing override for
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evsel__config() would only set PERF_RECORD_PERIOD if it set attr->freq
from perf record options. When it is set by libpfm events, it would not
get set. This changes evsel__config to see if attr->freq is set outside
of whether or not it changes attr->freq itself.
Signed-off-by: David Sharp <dhsharp@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: david sharp <dhsharp@google.com>
Link: http://lore.kernel.org/lkml/20200912025655.1337192-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.
The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Memory sanitizer warns if a write is performed where the memory being
read for the write is uninitialized. Avoid this warning by initializing
the memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200912053725.1405857-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf
test signal':
Program received signal SIGSEGV, Segmentation fault.
0x0000000000c68548 in __test_function ()
(gdb) bt
#0 0x0000000000c68548 in __test_function ()
#1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61
#2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ...
#3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ...
#4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ...
#5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ...
...
It's caused by the symbol __test_function being in the ".bss" section:
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[28] .bss NOBITS 0000000000c356a0 008346a0
00000000000511f8 0000000000000000 WA 0 0 32
$ nm perf | grep __test_function
0000000000c68548 B __test_function
I guess most of the time we're just lucky the inline asm ended up in the
".text" section, so making it specific explicit with push and pop
section clauses.
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[13] .text PROGBITS 0000000000431240 00031240
0000000000306faa 0000000000000000 AX 0 0 16
$ nm perf | grep __test_function
00000000004d62c8 T __test_function
Committer testing:
$ readelf -wi ~/bin/perf | grep producer -m1
<c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all
^^^^^
^^^^^
^^^^^
$
Before:
$ perf test signal
20: Breakpoint overflow signal handler : FAILED!
$
After:
$ perf test signal
20: Breakpoint overflow signal handler : Ok
$
Fixes: 8fd34e1cce18 ("perf test: Improve bp_signal")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On v5.8 when doing seccomp syscall rewrites (e.g. getpid into getppid
as seen in the seccomp selftests), trace (and audit) correctly see the
rewritten syscall on entry and exit:
seccomp_bpf-1307 [000] .... 22974.874393: sys_enter: NR 110 (...
seccomp_bpf-1307 [000] .N.. 22974.874401: sys_exit: NR 110 = 1304
With mainline we see a mismatched enter and exit (the original syscall
is incorrectly visible on entry):
seccomp_bpf-1030 [000] .... 21.806766: sys_enter: NR 39 (...
seccomp_bpf-1030 [000] .... 21.806767: sys_exit: NR 110 = 1027
When ptrace or seccomp change the syscall, this needs to be visible to
trace and audit at that time as well. Update the syscall earlier so they
see the correct value.
Fixes: d88d59b64ca3 ("core/entry: Respect syscall number rewrites")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200912005826.586171-1-keescook@chromium.org
|
|
The fix for receiving (internally generated) bla packets outside the
interrupt context introduced the usage of in_interrupt(). But this
functionality is only defined in linux/preempt.h which was not included
with the same patch.
Fixes: 279e89b2281a ("batman-adv: bla: use netif_rx_ni when not in interrupt context")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Add trackpoint variant IDs to allow supported control on Synaptics
trackpoints.
Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
rxe will hold a refcount on the IB device as long as CQ objects exist,
this causes destruction of a rxe device to hang if the CQ pool has any
cached CQs since they are being destroyed after the refcount must go to
zero.
Treat the CQ pool like a client and create/destroy it before/after all
other clients. No users of CQ pool can exist past a client remove call.
Link: https://lore.kernel.org/r/e8a240aa-9e9b-3dca-062f-9130b787f29b@acm.org
Fixes: c7ff819aefea ("RDMA/core: Introduce shared CQ pool API")
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8c0 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the softscroll code got removed, this argument is always zero and
makes no sense any more.
Tested-by: Yuan Ming <yuanmingbuaa@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This (and the VGA soft scrollback) turns out to have various nasty small
special cases that nobody really is willing to fight. The soft
scrollback code was really useful a few decades ago when you typically
used the console interactively as the main way to interact with the
machine, but that just isn't the case any more.
So it's not worth dragging along.
Tested-by: Yuan Ming <yuanmingbuaa@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This isn't safe, and isn't needed either. We are guaranteed that any
work we queue is on a live task (and will be run), or it goes to
our backup io-wq threads if the task is exiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If task_work ends up being marked for cancelation, we go through a
cancelation helper instead of the queue path. In converting task_work to
always hold a ctx reference, this path was missed. Make sure that
io_req_task_cancel() puts the reference that is being held against the
ctx.
Fixes: 6d816e088c35 ("io_uring: hold 'ctx' reference around task_work queue + execute")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As the only user has been removed in previous patch, let's revert
this one together.
This reverts commit be192209d5a33c912caa4a05d6f92b89328d8db8.
Reported-by: Matthias Weisser <m.weisser.m@gmail.com>
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/1599205640-26690-2-git-send-email-yangyicong@hisilicon.com
|
|
Previous patch intends to restore the flash's QE bit when removed/shutdown,
but may have some problems and break the flash:
- for those originally in Quad mode, this patch will clear the QE bit
when unloaded the flash, which is incorrect.
- even with above problem solved, it may still break the flash as some
flash's QE bit is non-volatile and lots of set/reset will wear out
the bit.
- the restore method cannot be proved to be valid as if a hard
reset or accident crash happened, the spi_nor_restore() won't be
performed the the QE bit will not be restored as we expected to.
So let's revert it to fix this. The discussion can be found at [1].
This reverts commit cc59e6bb6cd69d3347c06ccce088c5c6052e041e.
[1] https://lore.kernel.org/linux-mtd/CAO8h3eFLVLRmw7u+rurKsg7=Nh2q-HVq-HgVXig8gf5Dffk8MA@mail.gmail.com/
Reported-by: Matthias Weisser <m.weisser.m@gmail.com>
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/1599205640-26690-1-git-send-email-yangyicong@hisilicon.com
|
|
When faulting in the pages for the user supplied buffer for the search
ioctl, we are passing only the base address of the buffer to the function
fault_in_pages_writeable(). This means that after the first iteration of
the while loop that searches for leaves, when we have a non-zero offset,
stored in 'sk_offset', we try to fault in a wrong page range.
So fix this by adding the offset in 'sk_offset' to the base address of the
user supplied buffer when calling fault_in_pages_writeable().
Several users have reported that the applications compsize and bees have
started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix
potential deadlock in the search ioctl") was added to stable trees, and
these applications make heavy use of the search ioctls. This fixes their
issues.
Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/
Link: https://github.com/kilobyte/compsize/issues/34
Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl")
CC: stable@vger.kernel.org # 4.4+
Tested-by: A L <mail@lechevalier.se>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The patch partially reverts some of the UAPI bits of the buffer
cache management hints. Namely, the queue consistency (memory
coherency) user-space hint because, as it turned out, the kernel
implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT.
The patch reverts both kernel and user space parts: removes the
DMA consistency attr functions, rolls back changes to v4l2_requestbuffers,
v4l2_create_buffers structures and corresponding UAPI functions
(plus compat32 layer) and cleans up the documentation.
[hverkuil: fixed a few typos in the commit log]
[hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c]
[mchehab: fixed a typo in the commit log: revers->reverts]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message
coming from Hyper-V. But if the message isn't found for some reason,
the panic path gets hung forever. Add a timeout of 10 seconds to prevent
this.
Fixes: 415719160de3 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1600026449-23651-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
If CONFIG_NO_DMA=y (e.g. Sun-3 allmodconfig):
drivers/mmc/host/mmc_spi.c:1323:15: warning: return type defaults to ‘int’ [-Wreturn-type]
static inline mmc_spi_dma_alloc(struct mmc_spi_host *host) { return 0; }
^~~~~~~~~~~~~~~~~
Fix this by adding the missing return type.
Fixes: a395acf0f6dc6409 ("mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200914094243.3912-1-geert@linux-m68k.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The x86-64 psABI [0] specifies special relocation types
(R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
can take advantage of for optimization (relaxation) at link time. This
is supported by LLD and binutils versions 2.26 onwards.
The compressed kernel is position-independent code, however, when using
LLD or binutils versions before 2.27, it must be linked without the -pie
option. In this case, the linker may optimize certain instructions into
a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.
This potential issue has been present with LLD and binutils-2.26 for a
long time, but it has never manifested itself before now:
- LLD and binutils-2.26 only relax
movq foo@GOTPCREL(%rip), %reg
to
leaq foo(%rip), %reg
which is still position-independent, rather than
mov $foo, %reg
which is permitted by the psABI when -pie is not enabled.
- GCC happens to only generate GOTPCREL relocations on mov instructions.
- CLang does generate GOTPCREL relocations on non-mov instructions, but
when building the compressed kernel, it uses its integrated assembler
(due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
which has so far defaulted to not generating the GOTPCRELX
relocations.
Nick Desaulniers reports [1,2]:
"A recent change [3] to a default value of configuration variable
(ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
relocations. LLD will relax instructions with these relocations based
on whether the image is being linked as position independent or not.
When not, then LLD will relax these instructions to use absolute
addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
Clang and linked with LLD to fail to boot."
Patch series [4] is a solution to allow the compressed kernel to be
linked with -pie unconditionally, but even if merged is unlikely to be
backported. As a simple solution that can be applied to stable as well,
prevent the assembler from generating the relaxed relocation types using
the -mrelax-relocations=no option. For ease of backporting, do this
unconditionally.
[0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
[1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
[2] https://github.com/ClangBuiltLinux/linux/issues/1121
[3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
[4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu
|
|
Current BDW virtual display port is initialized as PORT_B, so need
to use same port for VFIO EDID region, otherwise invalid EDID blob
pointer is assigned which caused kernel null pointer reference. We
might evaluate actual display hotplug for BDW to make this function
work as expected, anyway this is always required to be fixed first.
Reported-by: Alejandro Sior <aho@sior.be>
Cc: Alejandro Sior <aho@sior.be>
Fixes: 0178f4ce3c3b ("drm/i915/gvt: Enable vfio edid for all GVT supported platform")
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200914030302.2775505-1-zhenyuw@linux.intel.com
|
|
Program exception 3f (secure storage violation) can only be detected
when the CPU is running in SIE with a format 4 state description,
e.g. running a protected guest. Because of this and because user
space partly controls the guest memory mapping and can trigger this
exception, we want to send a SIGSEGV to the process running the guest
and not panic the kernel.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Switch order so that locking state is consistent even
if the IRQ tracer calls into lockdep again.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
commit f606b3ef47c9 ("s390/pci: adapt events for zbus") removed the
zpci_disable_device() call for a zPCI event with PEC 0x0304 because
the device is already deconfigured by the platform.
This however skips the Linux side of the disable in particular it leads
to leaking the DMA tables and bitmaps because zpci_dma_exit_device() is
never called on the device.
If the device transitions to the Reserved state we call zpci_zdev_put()
but zpci_release_device() will not call zpci_disable_device() because
the state of the zPCI function is already ZPCI_FN_STATE_STANDBY.
If the device is put into the Standby state, zpci_disable_device() is
not called and the device is assumed to have been put in Standby through
platform action.
At this point the device may be removed by a subsequent event with PEC
0x0308 or 0x0306 which calls zpci_zdev_put() with the same problem
as above or the device may be configured again in which case
zpci_disable_device() is also not called.
Fix this by calling zpci_disable_device() explicitly for PEC 0x0304 as
before. To make it more clear that zpci_disable_device() may be called,
even if the lower level device has already been disabled by the
platform, add a comment to zpci_disable_device().
Cc: <stable@vger.kernel.org> # 5.8
Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
