summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-16LZ4 : fix the data abort issueJeHyeon Yeon
If the part of the compression data are corrupted, or the compression data is totally fake, the memory access over the limit is possible. This is the log from my system usning lz4 decompression. [6502]data abort, halting [6503]r0 0x00000000 r1 0x00000000 r2 0xdcea0ffc r3 0xdcea0ffc [6509]r4 0xb9ab0bfd r5 0xdcea0ffc r6 0xdcea0ff8 r7 0xdce80000 [6515]r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0xb9a98000 [6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc 0x820149bc [6528]spsr 0x400001f3 and the memory addresses of some variables at the moment are ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000 As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory over @oend. Signed-off-by: JeHyeon Yeon <tom.yeon@windriver.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16kernfs: handle poll correctly on 'direct_read' files.NeilBrown
Kernfs supports two styles of read: direct_read and seqfile_read. The latter supports 'poll' correctly thanks to the update of '->event' in kernfs_seq_show. The former does not as '->event' is never updated on a read. So add an appropriate update in kernfs_file_direct_read(). This was noticed because some 'md' sysfs attributes were recently changed to use direct reads. Reported-by: Prakash Punnoor <prakash@punnoor.de> Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Fixes: 750f199ee8b578062341e6ddfe36c59ac8ff2dcb Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Merge tag 'mac80211-for-davem-2015-03-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are a few fixes that I'd like to still get in: * disable U-APSD for better interoperability, from Michal Kazior * drop unencrypted frames in mesh forwarding, from Bob Copeland * treat non-QoS/WMM HT stations as non-HT, to fix confusion when they connect and then get QoS packets anyway due to HT * fix counting interfaces for combination checks, otherwise the interface combinations aren't properly enforced (from Andrei) * fix pure ECSA by reacting to the IE change * ignore erroneous (E)CSA to the current channel which sometimes happens due to AP/GO bugs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-03-16 1) Fix the network header offset in _decode_session6 when multiple IPv6 extension headers are present. From Hajime Tazaki. 2) Fix an interfamily tunnel crash. We set outer mode protocol too early and may dispatch to the wrong address family. Move the setting of the outer mode protocol behind the last accessing of the inner mode to fix the crash. 3) Most callers of xfrm_lookup() expect that dst_orig is released on error. But xfrm_lookup_route() may need dst_orig to handle certain error cases. So introduce a flag that tells what should be done in case of error. From Huaibin Wang. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16hwmon: (pwm-fan, vexpress) Constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-16HID: wacom: ask for a in-prox report when it was missedBenjamin Tissoires
If noone listens to the input device when a tool comes in proximity, the tablet does not send the in-prox event when a client becomes available. That means that no events will be sent until the tool is taken out of proximity. In this situation, ask for the report WACOM_REPORT_INTUOSREAD which will read the corresponding feature and generate an in-prox event. To make some generation of hardware working, we need to unset the quirk NO_GET set by hid-core because the interfaces are seen as "boot mouse". We don't schedule this read in a worker while we are in an IO interrupt. We know that usbhid will do it asynchronously. If this is triggered by uhid, then this is obviously a client side bug :) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16dmaengine: dw: append MODULE_ALIAS for platform driverAndy Shevchenko
The commit 9cade1a46c77 (dma: dw: split driver to library part and platform code) introduced a separate platform driver but missed to add a MODULE_ALIAS("platform:dw_dmac"); to that module. The patch adds this to get driver loaded automatically if platform device is registered. Reported-by: "Blin, Jerome" <jerome.blin@intel.com> Fixes: 9cade1a46c77 (dma: dw: split driver to library part and platform code) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16Revert "Input: synaptics - use dmax in input_mt_assign_slots"Dmitry Torokhov
This reverts commit 6ab17a8484f03c188a93713369912f1545eb26e9 since it, according to Benjamin, causes issues with slot assignment: E: 15.669119 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 15.954242 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 15.954242 0003 0039 0505 # EV_ABS / ABS_MT_TRACKING_ID 505 E: 15.954242 0003 0035 3851 # EV_ABS / ABS_MT_POSITION_X 3851 E: 15.954242 0003 0036 4076 # EV_ABS / ABS_MT_POSITION_Y 4076 E: 15.954242 0003 003a 0034 # EV_ABS / ABS_MT_PRESSURE 34 E: 15.954242 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 15.954242 0003 0000 3851 # EV_ABS / ABS_X 3851 E: 15.954242 0003 0001 4076 # EV_ABS / ABS_Y 4076 E: 15.954242 0003 0018 0034 # EV_ABS / ABS_PRESSURE 34 E: 15.954242 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 15.954242 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- ... (bunch of regular events)... E: 16.020614 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.043601 0003 0035 3873 # EV_ABS / ABS_MT_POSITION_X 3873 E: 16.043601 0003 0036 3903 # EV_ABS / ABS_MT_POSITION_Y 3903 E: 16.043601 0003 003a 0050 # EV_ABS / ABS_MT_PRESSURE 50 E: 16.043601 0003 0035 3032 # EV_ABS / ABS_MT_POSITION_X 3032 E: 16.043601 0003 0036 3832 # EV_ABS / ABS_MT_POSITION_Y 3832 E: 16.043601 0003 003a 0044 # EV_ABS / ABS_MT_PRESSURE 44 E: 16.043601 0003 0000 3032 # EV_ABS / ABS_X 3032 E: 16.043601 0003 0001 3832 # EV_ABS / ABS_Y 3832 E: 16.043601 0003 0018 0044 # EV_ABS / ABS_PRESSURE 44 E: 16.043601 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 16.043601 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 16.043601 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.068837 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 16.068837 0003 0039 0506 # EV_ABS / ABS_MT_TRACKING_ID 506 E: 16.068837 0003 0035 3912 # EV_ABS / ABS_MT_POSITION_X 3912 E: 16.068837 0003 0036 3743 # EV_ABS / ABS_MT_POSITION_Y 3743 E: 16.068837 0003 003a 0056 # EV_ABS / ABS_MT_PRESSURE 56 E: 16.068837 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 16.068837 0003 0035 3026 # EV_ABS / ABS_MT_POSITION_X 3026 E: 16.068837 0003 0036 3708 # EV_ABS / ABS_MT_POSITION_Y 3708 E: 16.068837 0003 003a 0052 # EV_ABS / ABS_MT_PRESSURE 52 E: 16.068837 0003 0000 3026 # EV_ABS / ABS_X 3026 E: 16.068837 0003 0001 3708 # EV_ABS / ABS_Y 3708 E: 16.068837 0003 0018 0052 # EV_ABS / ABS_PRESSURE 52 E: 16.068837 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- Slot 0 and 1 gets inverted in the second report above, which introduces a cursor jump. The problem is that this cursor jump is often enough to leave the current widget, and X sends the scrolling events to whoever is now under the cursor. Reported-by: Benjamin Tissoires <btissoir@redhat.com> Reported-by: Hans de Goede <hdegoede@redhat.com>
2015-03-16Merge branch 'synaptics' into for-linusDmitry Torokhov
Bring in changes needed to properly handle Lenovo 2015 lineup.
2015-03-16staging: unisys: print MAC address via %pMAndy Shevchenko
This patch converts code to use %pM specifier instead of placing each byte on stack. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: unisys: fix some debugfs outputDan Carpenter
When we removed the ERRDEV() macro we made a small mistake so now it doesn't print the "Virtual PCI devices" section header. Fixes: 0aca78449b58 ('staging: unisys: remove ERRDEV macros') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: unisys: fix checkpatch warningsMichel von Czettritz
This fixes "braces {} are not necessary for single statement blocks" in uislib. Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: nvec: use !x instead of x == NULLSomya Anand
Functions like devm_kzalloc, kmalloc_array, devm_ioremap, usb_alloc_urb, alloc_netdev return NULL as a return value on failure. Generally, When NULL represents failure, !x is commonly used. This patch cleans up the tests on the results of these functions, thereby using !x instead of x == NULL or NULL == x. This is done via following coccinelle script: @prob_7@ identifier x; statement S; @@ ( x = devm_kzalloc(...); | x = usb_alloc_urb(...); | x = kmalloc_array(...); | x = devm_ioremap(...); | x = alloc_netdev(...); ) ... - if(NULL == x) + if(!x) S Further we have used isomorphism characteristics of coccinelle to indicate x == NULL and NULL == x are equivalent. This is done via following iso script. Expression @ is_null @ expression X; @@ X == NULL <=> NULL == X Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: goldfish: use !x instead of x == NULLSomya Anand
Functions like devm_kzalloc, kmalloc_array, devm_ioremap, usb_alloc_urb, alloc_netdev return NULL as a return value on failure. Generally, When NULL represents failure, !x is commonly used. This patch cleans up the tests on the results of these functions, thereby using !x instead of x == NULL or NULL == x. This is done via following coccinelle script: @prob_7@ identifier x; statement S; @@ ( x = devm_kzalloc(...); | x = usb_alloc_urb(...); | x = kmalloc_array(...); | x = devm_ioremap(...); | x = alloc_netdev(...); ) ... - if(NULL == x) + if(!x) S Further we have used isomorphism characteristics of coccinelle to indicate x == NULL and NULL == x are equivalent. This is done via following iso script. Expression @ is_null @ expression X; @@ X == NULL <=> NULL == X Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: gdm72xx: use !x instead of x == NULLSomya Anand
Functions like devm_kzalloc, kmalloc_array, devm_ioremap, usb_alloc_urb, alloc_netdev return NULL as a return value on failure. Generally, When NULL represents failure, !x is commonly used. This patch cleans up the tests on the results of these functions, thereby using !x instead of x == NULL or NULL == x. This is done via following coccinelle script: @prob_7@ identifier x; statement S; @@ ( x = devm_kzalloc(...); | x = usb_alloc_urb(...); | x = kmalloc_array(...); | x = devm_ioremap(...); | x = alloc_netdev(...); ) ... - if(NULL == x) + if(!x) S Further we have used isomorphism characteristics of coccinelle to indicate x == NULL and NULL == x are equivalent. This is done via following iso script. Expression @ is_null @ expression X; @@ X == NULL <=> NULL == X Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: gdm724x: use !x instead of x == NULLSomya Anand
Functions like devm_kzalloc, kmalloc_array, devm_ioremap, usb_alloc_urb, alloc_netdev return NULL as a return value on failure. Generally, When NULL represents failure, !x is commonly used. This patch cleans up the tests on the results of these functions, thereby using !x instead of x == NULL or NULL == x. This is done via following coccinelle script: @prob_7@ identifier x; statement S; @@ ( x = devm_kzalloc(...); | x = usb_alloc_urb(...); | x = kmalloc_array(...); | x = devm_ioremap(...); | x = alloc_netdev(...); ) ... - if(NULL == x) + if(!x) S Further we have used isomorphism characteristics of coccinelle to indicate x == NULL and NULL == x are equivalent. This is done via following iso script. Expression @ is_null @ expression X; @@ X == NULL <=> NULL == X Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: emuxx_udc: replace pr_* with dev_*Haneen Mohammed
dev_* is prefered over pr_* when appropriate dev structure is present. This patch replace pr_info and pr_warn with its dev_ counterpart. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16HID: hid-sensor-hub: Fix sparse warningSrinivas Pandruvada
Since I can't change the type of hid_set_field argument 3, using __force __s32 to remove this warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16Staging: ft1000: Remove parentheses around right side an assignmentHaneen Mohammed
Parentheses are not needed around the right hand side of an assignment. This patch remove parenthese of such occurenses. Issue was detected and solved using the following coccinelle script: @rule1@ identifier x, y, z; expression E1, E2; @@ ( x = (y == z); | x = (E1 == E2); | x = -( ... -) ; ) Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: media: Remove parentheses around right side an assignmentHaneen Mohammed
Parentheses are not needed around the right hand side of an assignment. This patch remove parenthese of such occurenses. Issue was detected and solved using the following coccinelle script: @rule1@ identifier x, y, z; expression E1, E2; @@ ( x = (y == z); | x = (E1 == E2); | x = -( ... -) ; ) Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rtl8723au: Remove parentheses around right side an assignmentHaneen Mohammed
Parentheses are not needed around the right hand side of an assignment. This patch remove parenthese of such occurenses. Issue was detected and solved using the following coccinelle script: @rule1@ identifier x, y, z; expression E1, E2; @@ ( x = (y == z); | x = (E1 == E2); | x = -( ... -) ; ) Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: gdm72xx: Iterate list using list_for_each_entrySomya Anand
Code using doubly linked list is iterated generally using list_empty and list_entry functions, but it can be better written using list_for_each_entry macro. This patch replaces the while loop containing list_empty and list_entry with list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a macro which is used to iterate over a list of given type. So while loop used to iterate over a list can be replaced with list_for_each_entry macro. However, if list_del is used in the loop, then list_for_each_entry_safe is a better choice. This transformation is done by using the following coccinelle script. @ rule1 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry; @@ - while (list_empty(&E1) == 0) + list_for_each_entry (I1, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ...when != list_del(...); when != list_del_init(...); } @ rule2 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry_safe; @@ T *I1; + T *tmp; ... - while (list_empty(&E1) == 0) + list_for_each_entry_safe (I1, tmp, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ... } Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: emxx_udc: Iterate list using list_for_each_entrySomya Anand
Code using doubly linked list is iterated generally using list_empty and list_entry functions, but it can be better written using list_for_each_entry macro. This patch replaces the while loop containing list_empty and list_entry with list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a macro which is used to iterate over a list of given type. So while loop used to iterate over a list can be replaced with list_for_each_entry macro. However, if list_del is used in the loop, then list_for_each_entry_safe is a better choice. This transformation is done by using the following coccinelle script. @ rule1 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry; @@ - while (list_empty(&E1) == 0) + list_for_each_entry (I1, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ...when != list_del(...); when != list_del_init(...); } @ rule2 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry_safe; @@ T *I1; + T *tmp; ... - while (list_empty(&E1) == 0) + list_for_each_entry_safe (I1, tmp, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ... } Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: ft1000: Iterate list using list_for_each_entrySomya Anand
Code using doubly linked list is iterated generally using list_empty and list_entry functions, but it can be better written using list_for_each_entry macro. This patch replaces the while loop containing list_empty and list_entry with list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a macro which is used to iterate over a list of given type. So while loop used to iterate over a list can be replaced with list_for_each_entry macro. However, if list_del is used in the loop, then list_for_each_entry_safe is a better choice. This transformation is done by using the following coccinelle script. @ rule1 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry; @@ - while (list_empty(&E1) == 0) + list_for_each_entry (I1, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ...when != list_del(...); when != list_del_init(...); } @ rule2 @ expression E1; identifier I1, I2; type T; iterator name list_for_each_entry_safe; @@ T *I1; + T *tmp; ... - while (list_empty(&E1) == 0) + list_for_each_entry_safe (I1, tmp, &E1, I2) { ...when != T *I1; - I1 = list_entry(E1.next, T, I2); ... } Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: i2o: Move assignment out of if statementSomya Anand
Checkpatch.pl suggest to avoid assignment in if statement. This patch moves assignments out of the if statement and place it before the if statement. This is done using following coccinelle script. @@ expression E1; identifier p; statement S; @@ - if ((p = E1)) + p = E1; + if (p) S Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16HID: hid-sensor-hub: fix attribute read for logical usage idSrinivas Pandruvada
For defining enumeration values like report or power status events, the enumeration usage ids are enclosed in a logical collection. In this case we need to match logical usage id for pending read on this usage id. For example, in the below field, when read is requested for 0319, the report will contain one of the status usages like 850, 851 etc. In this case the raw event will not match 0319. So when logical collection matches, then wake up the pending thread. Physical(Sensor.OtherCustom) Logical(Sensor.0319) Application(Sensor.Sensor) Usage(6) Sensor.0850 Sensor.0851 Sensor.0852 Sensor.0853 Sensor.0854 Sensor.0855 Logical Minimum(1) Logical Maximum(5) Report Size(8) Report Count(1) Report Offset(24) Flags( Array Absolute ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16Staging: fbtft: Remove unnecessary print messagesVatika Harlalka
These print functions are called at the beginning of the function and do not indicate any abnormal condition. Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rtl8192u: Simplify if conditionKsenija Stanojevic
This patch removes macro true from if condition since variable priv->ieee80211->LinkDetectInfo.bBusyTraffic is already of type bool. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rts5208: Use module_pci_driverVaishali Thakkar
Macro module_pci_driver is used for drivers whose init and exit paths does only register and unregister to pci API. So, here remove some boilerplate code by using module_pci_driver. Also, change driver to rtsx_driver, to avoid implicitly redefining driver_init. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: ft1000: Use module_pcmcia_driverVaishali Thakkar
Macro module_pcmcia_driver is used for drivers whose init and exit paths does only register and unregister to pcmcia API. So, here remove some boilerplate code by using module_pcmcia_driver. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: rtl8723au: remove intialization of static intsSupriya Karanth
static ints are initialized to 0 by the compiler. Explicit initialization is not necessary. Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL changes made using coccinelle script: @@ type T; identifier var; @@ static T var - =0 ; Signed-off-by: Supriya Karanth <iskaranth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: i2o: remove intialization of static intsSupriya Karanth
static ints are initialized to 0 by the compiler. Explicit initialization is not necessary. Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL changes made using coccinelle script: @@ type T; identifier var; @@ static T var - =0 ; Signed-off-by: Supriya Karanth <iskaranth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: dgap: Use setup_timer to combine initializationSomya Anand
The function setup_timer combines the initialization of a timer with the initialization of the timer's function and data fields. So, this patch combines the multiline code for timer initialization using the function setup_timer. This issue is identified via coccinelle script. @@ expression E1, E2, E3; type T; @@ - init_timer(&E1); ... ( - E1.function = E2; ... - E1.data = (T)E3; + setup_timer(&E1, E2, (T)E3); | - E1.data = (T)E3; ... - E1.function = E2; + setup_timer(&E1, E2, (T)E3); | - E1.function = E2; + setup_timer(&E1, E2, 0); ) Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16HID: plantronics: fix Kconfig defaultStefan Richter
This driver didn't exist until before v3.19. Why would suddenly everybody want to build it? Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16Staging: iio: use !x instead of x == NULLSomya Anand
Functions like devm_kzalloc, kmalloc_array, devm_ioremap, usb_alloc_urb, alloc_netdev return NULL as a return value on failure. Generally, When NULL represents failure, !x is commonly used. This patch cleans up the tests on the results of these functions, thereby using !x instead of x == NULL or NULL == x. This is done via following coccinelle script: @prob_7@ identifier x; statement S; @@ ( x = devm_kzalloc(...); | x = usb_alloc_urb(...); | x = kmalloc_array(...); | x = devm_ioremap(...); | x = alloc_netdev(...); ) ... - if(NULL == x) + if(!x) S Further we have used isomorphism characteristics of coccinelle to indicate x == NULL and NULL == x are equivalent. This is done via following iso script. Expression @ is_null @ expression X; @@ X == NULL <=> NULL == X Signed-off-by: Somya Anand <somyaanand214@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Use braces on all arms of if statementCristina Opriceana
Add braces to improve consistency when using if statements. Found by checkpatch.pl: "CHECK: braces {} should be used on all arms of this statement". Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Alignment should match open parenthesisCristina Opriceana
This patch arranges multiple-line parameters in accordance with the parameter above them to improve coding style. Found by checkpatch.pl Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Do not use multiple blank linesCristina Opriceana
This patch removes unnecessary blank lines between functions. Found by checkpatch.pl: "CHECK: Please don't use multiple blank lines". Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Prefer using the BIT macroCristina Opriceana
This patch replaces bit shifting on 1 with the BIT(x) macro as it's extensively used by other function in this driver. This was done with coccinelle: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Remove explicit comparison to NULLCristina Opriceana
This patch simplifies pointer comparison to NULL and makes code easier to read. Warning found by checkpatch.pl. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Remove space after type castCristina Opriceana
This patch removes unnecessary space after type casts. Warning found by checkpatch.pl. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16HID: pidff: support more than one concurrent effectJim Keir
The PID driver (usbhid/hid-pidff.c) does not set the effect ID when uploading an effect. The result is that the initial upload works but subsequent uploads to modify effect parameters are all directed at the last-created effect. The targeted effect ID must be passed back to the device when effect parameters are changed. This is done at the start of "pidff_set_condition_report", "pidff_set_periodic_report" etc. based on the value of "pidff->block_load[PID_EFFECT_ BLOCK_INDEX].value[0]". This value is only ever set during pidff_request_effect_upload. The result is stored in "pidff->pid_id[effect->id]" at the end of pid_upload_effect, for later use. However, if an effect is modified and re-sent then this identifier is not being copied back from pidff->pid_id[effect->id] before sending the command to the device. The fix is to do this at the start of pidff_upload_effect. Signed-off-by: Jim Keir <jimkeir@oracledbadirect.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16Staging: iio: Simplify return logicCristina Opriceana
This patch removes the conditional return of the ade77*_probe functions based on the return values of iio_device_register as the latter returns 0 or ret, the same as the checked values. Warning found by coccinelle. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: Remove parentheses around right side an assignmentHaneen Mohammed
Parentheses are not needed around the right hand side of an assignment. This patch remove parenthese of such occurenses. Issue was detected and solved using the following coccinelle script: @rule1@ identifier x, y, z; expression E1, E2; @@ ( x = (y == z); | x = (E1 == E2); | x = -( ... -) ; ) Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: iio: ade7758: Remove braces on a single statement ifTaiane Coelho Ramos
This patch fixes the checkpatch.pl warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Taiane Coelho Ramos <exhora.tat@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rtl8188eu: Remove parentheses around right side an assignmentHaneen Mohammed
Parentheses are not needed around the right hand side of an assignment. This patch remove parenthese of such occurenses. Issue was detected and solved using the following coccinelle script: @rule1@ identifier x, y, z; expression E1, E2; @@ ( x = (y == z); | x = (E1 == E2); | x = -( ... -) ; ) Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: rtl8188eu: remove break after returnSupriya Karanth
Remove "break" statement after a "return" statement as it does not get executed. Found by checkpatch.pl - break is not useful after a goto or return Signed-off-by: Supriya Karanth <iskaranth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16staging: rtl8188eu: remove intialization of static intsSupriya Karanth
static ints are initialized to 0 by the compiler. Explicit initialization is not necessary. Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL changes made using coccinelle script: @@ type T; identifier var; @@ static T var - =0 ; Signed-off-by: Supriya Karanth <iskaranth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rtl8188eu: Eliminate use of _init_timerVaishali Thakkar
This patch introduces the use of API function setup_timer instead of driver specific function init_timer as it is the preferred and standard way to set and setup the timer. To be compatible with the changes, argument types of referenced functions are changed. Also, definition of function _init_timer is removed as it is no longer needed after this change. Here, these cases are handled using Coccinelle and semantic patch used for this is as follows: @@ expression x, y; identifier a, b;@@ - _init_timer (&x, y, a, b); + setup_timer (&x, a, (unsigned long)b); Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16Staging: rtl8188eu: Eliminate use of _set_timerVaishali Thakkar
This patch introduces the use of API function mod_timer instead of driver specific function _set_timer as it is a more efficient and standard way to update the expire field of an active timer. Also, definition of function _set_timer is removed as it is no longer needed after this change. Here, these cases are handled using Coccinelle and semantic patch used for this is as follows: @@ expression x; expression y;@@ - _set_timer (&x, y); + mod_timer (&x, jiffies + msecs_to_jiffies (y)); Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-21 16:47:36 +0000