summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-27drm/mediatek: dsi: Reduce the time of dsi from LP11 to sending cmdXinlei Lee
According to Figure 16 Turnaround Procedure on page 36 in [1], you can see the status of LP-00 -> LP10 -> LP11. This state can correspond to the state of DSI from LP00 -> LP11 in mtk_dsi_lane_ready function in mtk_dsi.c. LP-00 -> LP10 -> LP11 takes about 2*TLPX time (refer to [1] page 51 to see that TLPX is 50ns) The delay at the end of the mtk_dsi_lane_ready function should be greater than the 2*TLPX specified by the DSI spec, and less than the time specified by the DSI_RX (generally 6ms to 40ms), to avoid problems caused by the RX specification [1]:mipi_D-PHY_specification_v1-1 Fixes: 39e8d062b03c ("drm/mediatek: Keep dsi as LP00 before dcs cmds transfer") Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1673330093-6771-2-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-01-26drm/msm/dpu: set pdpu->is_rt_pipe early in dpu_plane_sspp_atomic_update()Dmitry Baryshkov
The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes") it sets the flag late, after all the qos functions have updated QoS programming. Move the flag update back to the place where it happened before the mentioned commit to let the pipe be programmed according to its current RT/non-RT state. Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/516239/ Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/dpu: correct the UBWC version on sm6115Dmitry Baryshkov
According to downstream (bengal-sde.dtsi), the sm6115 uses UBWC 1.0. Change the catalog entry accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514337/ Link: https://lore.kernel.org/r/20221207142833.204193-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/dpu: handle UBWC 1.0 in dpu_hw_sspp_setup_formatDmitry Baryshkov
Extend dpu_hw_sspp_setup_format() to also handle the UBWC 1.0 case. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514336/ Link: https://lore.kernel.org/r/20221207142833.204193-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/hdmi: make hdmi_phy_8960 OF clk providerDmitry Baryshkov
On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8960 to use DT clocks properties (rather than global clock names), register the OF clock provider. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/519211/ Link: https://lore.kernel.org/r/20230119132219.2479775-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/hdmi: switch hdmi_pll_8960 to use parent_dataDmitry Baryshkov
Replace parent_names usage with parent_data. Note, that this makes the PLL default to board's `pxo_board' clock rather than just `pxo' clock, as we are on a way to deprecate the global cxo/pxo clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/519210/ Link: https://lore.kernel.org/r/20230119132219.2479775-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26dt-bindings: phy: qcom, hdmi-phy-other: mark it as clock providerDmitry Baryshkov
Eventually all HDMI PHYs are going to provide the HDMI PLL clock to the MMCC. Add #clock-cells property required to provide the HDMI PLL clock to other devices. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/519213/ Link: https://lore.kernel.org/r/20230119132219.2479775-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26dt-bindings: phy: qcom, hdmi-phy-other: use pxo clockDmitry Baryshkov
Add pxo clock to the 8960 bindings (used by the HDMI PLL) Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/519206/ Link: https://lore.kernel.org/r/20230119132219.2479775-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/dsi: properly handle the case of empty OPP table in ↵Dmitry Baryshkov
dsi_mgr_bridge_mode_valid It was left unnoticed during the review that even if there is no OPP table in device tree, one will be created by a call to the function devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid() rejecting all modes if DT contains no OPP table for the DSI host. Rework dsi_mgr_bridge_mode_valid() to handle this case by actually checking that the table is populated with frequency entries before returning an error. Fixes: 8328041b8c82 ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520076/ Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/dpu: Add DSC hardware blocks to register snapshotMarijn Suijten
Add missing DSC hardware block register ranges to the snapshot utility to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the kms debugfs file. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520175/ Link: https://lore.kernel.org/r/20230125101412.216924-1-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26Merge tag 'nvme-6.2-2023-01-26' of git://git.infradead.org/nvme into block-6.2Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.2 - flush initial scan_work for async probe (Keith Busch) - fix passthrough csi check (Keith Busch) - fix nvme-fc initialization order (Ross Lagerwall)" * tag 'nvme-6.2-2023-01-26' of git://git.infradead.org/nvme: nvme: fix passthrough csi check nvme-pci: flush initial scan_work for async probe nvme-fc: fix initialization order
2023-01-26Merge tag 'platform-drivers-x86-v6.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Fix false positive apple_gmux backlight detection on older iGPU only MacBook models - Various other small fixes and hardware-id additions * tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms ACPI: video: Fix apple gmux detection platform/x86: apple-gmux: Add apple_gmux_detect() helper platform/x86: apple-gmux: Move port defines to apple-gmux.h platform/x86: hp-wmi: Fix cast to smaller integer type warning platform/x86/amd: pmc: Add a module parameter to disable workarounds platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF platform/x86: hp-wmi: Handle Omen Key event platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table
2023-01-26Merge tag 'net-6.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - sched: sch_taprio: do not schedule in taprio_reset() Previous releases - regressions: - core: fix UaF in netns ops registration error path - ipv4: prevent potential spectre v1 gadgets - ipv6: fix reachability confirmation with proxy_ndp - netfilter: fix for the set rbtree - eth: fec: use page_pool_put_full_page when freeing rx buffers - eth: iavf: fix temporary deadlock and failure to set MAC address Previous releases - always broken: - netlink: prevent potential spectre v1 gadgets - netfilter: fixes for SCTP connection tracking - mctp: struct sock lifetime fixes - eth: ravb: fix possible hang if RIS2_QFF1 happen - eth: tg3: resolve deadlock in tg3_reset_task() during EEH Misc: - Mat stepped out as MPTCP co-maintainer" * tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits) net: mdio-mux-meson-g12a: force internal PHY off on mux switch docs: networking: Fix bridge documentation URL tsnep: Fix TX queue stop/wake for multiple queues net/tg3: resolve deadlock in tg3_reset_task() during EEH net: mctp: mark socks as dead on unhash, prevent re-add net: mctp: hold key reference when looking up a general key net: mctp: move expiry timer delete to unhash net: mctp: add an explicit reference from a mctp_sk_key to sock net: ravb: Fix possible hang if RIS2_QFF1 happen net: ravb: Fix lack of register setting after system resumed for Gen3 net/x25: Fix to not accept on connected socket ice: move devlink port creation/deletion sctp: fail if no bound addresses can be used for a given scope net/sched: sch_taprio: do not schedule in taprio_reset() Revert "Merge branch 'ethtool-mac-merge'" netrom: Fix use-after-free of a listening socket. netfilter: conntrack: unify established states for SCTP paths Revert "netfilter: conntrack: add sctp DATA_SENT state" netfilter: conntrack: fix bug in for_each_sctp_chunk netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE ...
2023-01-26treewide: fix up files incorrectly marked executableLinus Torvalds
I'm not exactly clear on what strange workflow causes people to do it, but clearly occasionally some files end up being committed as executable even though they clearly aren't. This is a reprise of commit 90fda63fa115 ("treewide: fix up files incorrectly marked executable"), just with a different set of files (but with the same trivial shell scripting). So apparently we need to re-do this every five years or so, and Joe needs to just keep reminding me to do so ;) Reported-by: Joe Perches <joe@perches.com> Fixes: 523375c943e5 ("drm/vmwgfx: Port vmwgfx to arm64") Fixes: 5c439937775d ("ASoC: codecs: add support for ES8326") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-26drm/i915/xehp: Annotate a couple more workaround registers as MCRMatt Roper
GAMSTLB_CTRL and GAMCNTRL_CTRL became multicast/replicated registers on Xe_HP. They should be defined accordingly and use MCR-aware operations. These registers have only been used for some dg2/xehpsdv workarounds, so this fix is mostly just for consistency/future-proofing; even lacking the MCR annotation, workarounds will always be properly applied in a multicast manner on these platforms. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Fixes: 58bc2453ab8a ("drm/i915: Define multicast registers as a new type") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-3-matthew.d.roper@intel.com
2023-01-26drm/i915/mtl: Correct implementation of Wa_18018781329Matt Roper
Workaround Wa_18018781329 has applied to several recent Xe_HP-based platforms. However there are some extra gotchas to implementing this properly for MTL that we need to take into account: * Due to the separation of media and render/compute into separate GTs, this workaround needs to be implemented on each GT, not just the primary GT. Since each class of register only exists on one of the two GTs, we should program the appropriate registers on each GT. * As with past Xe_HP platforms, the registers on the primary GT (Xe_LPG IP) are multicast/replicated registers and should be handled with the MCR-aware functions. However the registers on the media GT (Xe_LPM+ IP) are regular singleton registers and should _not_ use MCR handling. We need to create separate register definitions for the Xe_HP multicast form and the Xe_LPM+ singleton form and use each in the appropriate place. * Starting with MTL, workarounds documented by the hardware teams are technically associated with IP versions/steppings rather than top-level platforms. That means we should take care to check the media IP version rather than the graphics IP version when deciding whether the workaround is needed on the Xe_LPM+ media GT (in this case the workaround applies to both IPs and the stepping bounds are identical, but we should still write the code appropriately to set a proper precedent for future workaround implementations). * It's worth noting that the GSC register and the CCS register are defined with the same MMIO offset (0xCF30). Since the CCS is only relevant to the primary GT and the GSC is only relevant to the media GT there isn't actually a clash here (the media GT automatically adds the additional 0x380000 GSI offset). However there's currently a glitch in the bspec where the CCS register doesn't show up at all and the GSC register is listed as existing on both GTs. That's a known documentation problem for several registers with shared GSC/CCS offsets; rest assured that the CCS register really does still exist. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Fixes: 41bb543f5598 ("drm/i915/mtl: Add initial gt workarounds") Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-2-matthew.d.roper@intel.com
2023-01-26drm/i915/xehp: GAM registers don't need to be re-applied on engine resetsMatt Roper
Register reset characteristics (i.e., whether the register maintains or loses its value on engine reset) is an important factor that determines which wa_list we want to add workarounds to. We recently found out that the bspec documentation for the Xe_HP's "GAM" registers in the 0xC800 - 0xCFFF range was misleading; these registers do not actually lose their value on engine resets as the documentation implied. This means there's no need to re-apply workarounds touching these registers after a reset, and the corresponding workarounds should be moved from the 'engine' lists back to the 'gt' list. v2: - Don't add Wa_18018781329 to xehpsdv; the original condition didn't include that platform. (Gustavo) - Move the MTL code to the GT function as-is for now; we'll take care of the additional fixes needed in a follow-up patch. Cc: Gustavo Sousa <gustavo.sousa@intel.com> Fixes: edf176f48d87 ("drm/i915/dg2: Move misplaced 'ctx' & 'gt' wa's to engine wa list") Fixes: b2006061ae28 ("drm/i915/xehpsdv: Move render/compute engine reset domains related workarounds") Fixes: 41bb543f5598 ("drm/i915/mtl: Add initial gt workarounds") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-1-matthew.d.roper@intel.com
2023-01-26drm/tegra: Remove #ifdef guards for PM related functionsPaul Cercueil
Use the RUNTIME_PM_OPS() and pm_ptr() macros to handle the .runtime_suspend/.runtime_resume callbacks. These macros allow the suspend and resume functions to be automatically dropped by the compiler when CONFIG_PM is disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26drm/tegra: Remove redundant null checks before kfreeYushan Zhou
Fix the following coccicheck warning: ./drivers/gpu/drm/tegra/submit.c:689:2-7: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Yushan Zhou <katrinzhou@tencent.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: External timeout/cancellation for fencesMikko Perttunen
Currently all fences have a 30 second timeout to ensure they are cleaned up if the fence never completes otherwise. However, this one size fits all solution doesn't actually fit in every case, such as syncpoint waiting where we want to be able to have timeouts longer than 30 seconds. As such, we want to be able to give control over fence cancellation to the caller (and maybe eventually get rid of the internal timeout altogether). Here we add this cancellation mechanism by essentially adding a function for entering the timeout path by function call, and changing the syncpoint wait function to use it. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: Rewrite syncpoint interrupt handlingMikko Perttunen
Move from the old, complex intr handling code to a new implementation based on dma_fences. While there is a fair bit of churn to get there, the new implementation is much simpler and likely faster as well due to allowing signaling directly from interrupt context. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: Implement job tracking using DMA fencesMikko Perttunen
In anticipation of removal of the intr API, implement job tracking using DMA fences instead. The main two things about this are making cdma_update schedule the work since fence completion can now be called from interrupt context, and some complication in ensuring the callback is not running when we free the fence. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: Implement syncpoint wait using DMA fencesMikko Perttunen
In anticipation of removal of the intr API, move host1x_syncpt_wait to use DMA fences instead. As of this patch, this means that waits have a 30 second maximum timeout because of the implicit timeout we have with fences, but that will be lifted in a follow-up patch. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26drm/tegra: firewall: Check for is_addr_reg existence in IMM checkMikko Perttunen
In the IMM opcode check, don't call is_addr_reg if it's not set. Fixes: 8cc95f3fd35e ("drm/tegra: Add job firewall") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: Don't skip assigning syncpoints to channelsMikko Perttunen
The code to write the syncpoint channel assignment register incorrectly skips the write if hypervisor registers are not available. The register, however, is within the guest aperture so remove the check and assign syncpoints properly even on virtualized systems. Fixes: c3f52220f276 ("gpu: host1x: Enable Tegra186 syncpoint protection") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26gpu: host1x: Fix mask for syncpoint increment registerMikko Perttunen
On Tegra186+, the syncpoint ID has 10 bits of space. To allow using more than 256 syncpoints, fix the mask. Fixes: 9abdd497cd0a ("gpu: host1x: Tegra234 device data and headers") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26MAINTAINERS: Update Tegra DRM treeThierry Reding
The Tegra DRM tree moved to freedesktop.org's gitlab a few releases ago, so update the MAINTAINERS entry accordingly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-01-26block: ublk: move ublk_chr_class destroying after devices are removedMing Lei
The 'ublk_chr_class' is needed when deleting ublk char devices in ublk_exit(), so move it after devices(idle) are removed. Fixes the following warning reported by Harris, James R: [ 859.178950] sysfs group 'power' not found for kobject 'ublkc0' [ 859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0 Reported-by: "Harris, James R" <james.r.harris@intel.com> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Link: https://lore.kernel.org/linux-block/Y9JlFmSgDl3+zy3N@T590/T/#t Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Jim Harris <james.r.harris@intel.com> Link: https://lore.kernel.org/r/20230126115346.263344-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-26Partially revert "perf/arm-cmn: Optimise DTC counter accesses"Robin Murphy
It turns out the optimisation implemented by commit 4f2c3872dde5 is totally broken, since all the places that consume hw->dtcs_used for events other than cycle count are still not expecting it to be sparsely populated, and fail to read all the relevant DTC counters correctly if so. If implemented correctly, the optimisation potentially saves up to 3 register reads per event update, which is reasonably significant for events targeting a single node, but still not worth a massive amount of additional code complexity overall. Getting it right within the current design looks a fair bit more involved than it was ever intended to be, so let's just make a functional revert which restores the old behaviour while still backporting easily. Fixes: 4f2c3872dde5 ("perf/arm-cmn: Optimise DTC counter accesses") Reported-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/b41bb4ed7283c3d8400ce5cf5e6ec94915e6750f.1674498637.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2023-01-26drm/i915/selftests: Flush all tiles on test exitTvrtko Ursulin
We want to idle all tiles when exiting selftests. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125100003.18243-1-nirmoy.das@intel.com
2023-01-26drm/i915/mtl: Apply Wa_14013475917 for all MTL steppingsJouni Högander
Wa_14013475917 has to be applied for all MTL steppings. Bspec: 66624 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-3-jouni.hogander@intel.com
2023-01-26drm/i915/psr: Implement Wa_14014971492Jouni Högander
Implement Wa_14014971492 and apply it for affected platforms. Bspec: 52890, 54369, 55378, 66624 v2: Adjust platforms where applied Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-2-jouni.hogander@intel.com
2023-01-26drm/i915/panel: move panel fixed EDID to struct intel_panelJani Nikula
It's a bit confusing to have two cached EDIDs in struct intel_connector with slightly different purposes. Make the distinction a bit clearer by moving the EDID cached for eDP and LVDS panels at connector init time to struct intel_panel, and name it fixed_edid. That's what it is, a fixed EDID for the panels. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/opregion: convert intel_opregion_get_edid() to struct drm_edidJani Nikula
Simplify validation and use by converting to drm_edid. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6abb01f1e97d54a3c11bec24377f035df412b492.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/bios: convert intel_bios_init_panel() to drm_edidJani Nikula
Try to use struct drm_edid where possible, even if having to fall back to looking into struct edid down low via drm_edid_raw(). v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/edid: convert DP, HDMI and LVDS to drm_edidJani Nikula
Convert all the connectors that use cached connector edid and detect_edid to drm_edid. Since drm_get_edid() calls drm_connector_update_edid_property() while drm_edid_read*() do not, we need to call drm_edid_connector_update() separately, in part due to the EDID caching behaviour in HDMI and DP. Especially DP depends on the details parsed from EDID. (The big behavioural change conflating EDID reading with parsing and property update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")) v6: Rebase on drm_edid_connector_add_modes() v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>) v4: Call drm_edid_connector_update() after reading HDMI/DP EDID v3: Don't leak vga switcheroo EDID in LVDS init (Ville) v2: Don't leak opregion fallback EDID (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
2023-01-26habanalabs: Fix list of /sys/class/habanalabs/hl<n>/statusBagas Sanjaya
Stephen Rothwell reported htmldocs warnings when merging accel tree: Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation. Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation. Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent. Fix these by fixing alignment of list of card status returned by /sys/class/habanalabs/hl<n>/status. Link: https://lore.kernel.org/linux-next/20230120130634.61c3e857@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26Documentation: accel: escape wildcard in special file pathBagas Sanjaya
Stephen Rothwell reported htmldocs warning then merging accel tree: Documentation/accel/introduction.rst:72: WARNING: Inline emphasis start-string without end-string. Sphinx confuses the file wildcards with inline emphasis (italics), hence the warning. Fix the warning by escaping wildcards. Link: https://lore.kernel.org/linux-next/20230120132116.21de1104@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26docs: accel: Fix debugfs pathJeffrey Hugo
The device specific directory in debugfs does not have "accel". For example, the documentation says device 0 should have a debugfs entry as /sys/kernel/debug/accel/accel0/ but in reality the entry is /sys/kernel/debug/accel/0/ Fix the documentation to match the implementation. Fixes: 8c5577a5ccc6 ("doc: add documentation for accel subsystem") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs/gaudi2: find decode error root causeKoby Elbaz
When a decode error happens, we often don't know the exact root cause (the erroneous address that was accessed) and the exact engine that created the erroneous transaction. To find out, we need to go over all the relevant register blocks in the ASIC. Once we find the relevant engine, we print its details and the offending address. This helps tremendously when debugging an error that was created by running a user workload. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs/gaudi2: unsecure tpc kernel_config registersOfir Bitton
This is required in order to allow the kernel to control relevant configuration space via load and store instructions. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: clear in_compute_reset when escalating to hard resetTomer Tayar
If resetting device upon release while the release watchdog work is scheduled, the compute reset is replaced with hard reset. In this case, need to clear the in_compute_reset indication in the device reset information structure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: run error handling if scrub_device_mem fails after resetTomer Tayar
If device memory scrubbing from hl_device_reset() fails, we return with an error code but not perform error handling code. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: enhance info printed on FW load errorsMoti Haimovski
This commit enhances the following error messages to also provide the type of error occurred, this in order to ease debugging of errors detected during firmware-load. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: optimize command submission completion timestampOfir Bitton
Completion timestamp is taken during the actual command submission release. As the release happens in a work queue, the timestamp taken is not accurate. Hence, we will take the timestamp in the interrupt handler itself while propagating it to the release function. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: refactor user interrupt typeOfir Bitton
In order to support more user interrupt types in the future, we enumerate the user interrupt type instead of using a boolean. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs/gaudi2: fix emda range registers razwi handlingDani Liberman
Handling edma razwi is different than all other engines since edma uses sft routers. For hbw transactions sft router contain separate interface for each edma and for lbw there is common interface for both edma engines of the same dcore. To handle the razwi correctly we need to: 1. Simplify the calculation of the sft router address. 2. Add razwi handling for edma qm errors, since edma qman doesn't reports axi error response. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: block soft-reset on an unusable deviceKoby Elbaz
A device with status malfunction indicates that it can't be used. In such a case we do not support certain reset types, e.g., all kinds of soft-resets (compute reset, inference soft-reset), and reset upon device release. A hard-reset is the only way that an unusable device can change its status. All other reset procedures can't put the device in a reset procedure, which might ultimately cause the device to change its status, unintentionally, to become operational again. Such a scenario has recently occurred, when a user requested a hard-reset while another heavy user workload was ongoing (reset request is queued). Since the workload couldn't finish within reset's timeout limits, the reset has failed and set a device status malfunction. Eventually, when the user released the FD, an unsuccessful soft-reset occurred, hence followed by an additional hard-reset that changed the ASICs status back to be operational. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs/gaudi2: print page fault axi transaction idDani Liberman
AXI transaction id holds information about the initiator which caused the page fault. In the future it will be translated automatically by driver to an initiator name. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-01-26habanalabs: update device status sysfs documentationOfir Bitton
As device status was changed recently, we must update the documentation as well. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 03:49:58 +0000