summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-03drm/amd/display: fix use of uninitialized variableMartin Leung
tg_inst may be used uninitialized, so initialize it to 0. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: 3.2.51.1Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Add missing HBM support and raise Vega20's uclk.Zhan Liu
[Why] When more than 2 displays are connected to the graphics card, only the minimum memory clock is needed. However, when more displays are connected, the minimum memory clock is not sufficient enough to support the overwhelming bandwidth. System will hang under this circumstance. Also, the old code didn't address HBM cards, which has 2 pseudo channels. We need to add the HBM part here. [How] When graphics card connects to 2 or more displays, switch to high memory clock. Also, choose memory multiplier based on whether its regular DRAM or HBM. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: 3.2.51Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: enable single dp seamless bootMartin Leung
[why] seamless boot didn't work for non edp's before [how] removed edp-specific code, made dp read uefi-set link settings. Also fixed a hubbub code line to be consistent with usage of function. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: update odm mode validation to be in line with policyDmytro Laktyushkin
Previously 8k30 worked with dsc and odm combine due to a workaround that ran the formula a second time with dsc support enable should dsc validation fail. This worked when clocks were low enough for formula to enable odm to lower voltage, however now broke due to increased clocks. This change updates the ODM combine policy within the formula to properly reflect our current policy within DC, only enabling ODM when we have to, as well as adding a check for viewport width when dsc is enabled. As a side effect the redundant call to dml when odm is required is now unnecessary. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Optimize clocks on clock changeWesley Chalmers
[WHY] Presently, there is no way for clocks to be lowered, only raised. [HOW] Compare clock status against previous known clock status, and optimize if different. This requires re-ordering the layout of the dc_clocks structure, as the current ordering allows identical clock states to appear different. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Set number of pipes to 1 if the second pipe was disabledNikola Cornij
[why] Some ODM-related register settings are inconsistently updated by VBIOS, causing the state in DC to be invalid, which would then end up crashing in certain use-cases (such as disable/enable device). [how] Check the enabled status of the second pipe when determining the number of OPTC sources. If the second pipe is disabled, set the number of sources to 1 regardless of other settings (that may not be updated correctly). Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: set minimum abm backlight levelAnthony Koo
[Why] A lot of the time, the backlight characteristic curve maps min backlight to a non-zero value. But there are cases where we want the curve to intersect at 0. In this scenario even if OS never asks to set 0% backlight, the ABM reduction can result in backlight being lowered close to 0. This particularly can cause problems in some LED drivers, and in general just looks like backlight is completely off. [How] Add default cap to disallow backlight from dropping below 1% even after ABM reduction is applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Revert fixup DPP programming sequenceWesley Chalmers
[WHY] This change was made because DTO programming was double-buffered, which is itself an issue. After deactivating the DTO double buffer, this change becomes unnecessary. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Do not double-buffer DTO adjustmentsWesley Chalmers
[WHY] When changing DPP global ref clock, DTO adjustments must take effect immediately, or else underflow may occur. It appears the original decision to double-buffer DTO adjustments was made to prevent underflows that occur when raising DPP ref clock (which is not double-buffered), but that same decision causes similar issues when lowering DPP global ref clock. The better solution is to order the adjustments according to whether clocks are being raised or lowered. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03Revert "drm/sun4i: dsi: Change the start delay calculation"Icenowy Zheng
This reverts commit da676c6aa6413d59ab0a80c97bbc273025e640b2. The original commit adds a start parameter to the calculation of the start delay according to some old BSP versions from Allwinner. However, there're two ways to add this delay -- add it in DSI controller or add it in the TCON. Add it in both controllers won't work. The code before this commit is picked from new versions of BSP kernel, which has a comment for the 1 that says "put start_delay to tcon". By checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has already added this delay, so we shouldn't repeat to add the delay in DSI controller, otherwise the timing won't match. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.io
2019-10-03drm/sun4i: dsi: Fix TCON DRQ set bitsJagan Teki
The LCD timing definitions between Linux DRM vs Allwinner are different, below diagram shows this clear differences. Active Front Sync Back Region Porch Porch <-----------------------><----------------><--------------><--------------> //////////////////////| ////////////////////// | ////////////////////// |.................. ................ ________________ <----- [hv]display -----> <------------- [hv]sync_start ------------> <--------------------- [hv]sync_end ----------------------> <-------------------------------- [hv]total ------------------------------> <----- lcd_[xy] --------> <- lcd_[hv]spw -> <---------- lcd_[hv]bp ---------> <-------------------------------- lcd_[hv]t ------------------------------> The DSI driver misinterpreted the hbp term from the BSP code to refer only to the backporch, when in fact it was backporch + sync. Thus the driver incorrectly used the horizontal front porch plus sync in its calculation of the DRQ set bit value, when it should not have included the sync timing. Including additional sync timings leads to flip_done timed out as: WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 [CRTC:46:crtc-0] vblank wait timed out Modules linked in: CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13 Hardware name: Allwinner sun8i Family Workqueue: events deferred_probe_work_func [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14) [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98) [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114) [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68) [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c) [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128) [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc) [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54) [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac) [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104) [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390) [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4) [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc) [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84) [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60) [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20) [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8) [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8) [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118) [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160) [<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0) [<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140) [<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234) [<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c) [<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8) [<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160) [<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8) [<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c) [<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c) [<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90) [<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420) [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0) [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c) [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xde539fb0 to 0xde539ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace b57eb1e5c64c6b8b ]--- random: fast init done [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out With the terms(as described in above diagram) fixed, the panel displays correctly without any timeouts. Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-2-jagan@amarulasolutions.com
2019-10-03btrfs: fix uninitialized ret in ref-verifyJosef Bacik
Coverity caught a case where we could return with a uninitialized value in ret in process_leaf. This is actually pretty likely because we could very easily run into a block group item key and have a garbage value in ret and think there was an errror. Fix this by initializing ret to 0. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-03drm/sun4i: sun6i_mipi_dsi: Add VCC-DSI regulator supportJagan Teki
Allwinner MIPI DSI controllers are supplied with SoC DSI power rails via VCC-DSI pin. Add support for this supply pin by adding voltage regulator handling code to MIPI DSI driver. Tested-by: Merlijn Wajer <merlijn@wizzup.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-6-jagan@amarulasolutions.com
2019-10-03dt-bindings: sun6i-dsi: Add VCC-DSI supply propertyJagan Teki
Allwinner MIPI DSI controllers are supplied with SoC DSI power rails via VCC-DSI pin. Some board still work without supplying this but give more faith on datasheet and hardware schematics and document this supply property in required property list. Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003064527.15128-5-jagan@amarulasolutions.com
2019-10-03KVM: nVMX: Fix consistency check on injected exception error codeSean Christopherson
Current versions of Intel's SDM incorrectly state that "bits 31:15 of the VM-Entry exception error-code field" must be zero. In reality, bits 31:16 must be zero, i.e. error codes are 16-bit values. The bogus error code check manifests as an unexpected VM-Entry failure due to an invalid code field (error number 7) in L1, e.g. when injecting a #GP with error_code=0x9f00. Nadav previously reported the bug[*], both to KVM and Intel, and fixed the associated kvm-unit-test. [*] https://patchwork.kernel.org/patch/11124749/ Reported-by: Nadav Amit <namit@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03Merge tag 'kvmarm-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #1 - Remove the now obsolete hyp_alternate_select construct - Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-10-03KVM: x86: omit absent pmu MSRs from MSR listPaolo Bonzini
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since some machines actually have MSRs past the reserved range, these may survive the filtering of msrs_to_save array and would be rejected by KVM_GET/SET_MSR. To avoid this, cut the list to whatever CPUID reports for the host's architectural PMU. Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jim Mattson <jmattson@google.com> Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]", 2019-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03selftests: kvm: Fix libkvm build errorShuah Khan
Fix the following build error from "make TARGETS=kvm kselftest": libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC This error is seen when build is done from the main Makefile using kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS are defined. When build is invoked using: "make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS aren't defined. There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the check to determine if --no-pie is necessary, which is the case when these two aren't defined when "make -C tools/testing/selftests/kvm" runs. Fix it by simplifying the no-pie-option logic. With this change, both build variations work. "make TARGETS=kvm kselftest" "make -C tools/testing/selftests/kvm" Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03mmc: sh_mmcif: Use platform_get_irq_optional() for optional interruptGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, a scary warning may be printed for an optional interrupt: sh_mmcif ee200000.mmc: IRQ index 1 not found Fix this by calling platform_get_irq_optional() instead for the second interrupt, which is optional. Remove the now superfluous error printing for the first interrupt, which is mandatory. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-10-03mmc: renesas_sdhi: Do not use platform_get_irq() to count interruptsGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, counting interrupts by looping until failure causes the printing of scary messages like: renesas_sdhi_internal_dmac ee140000.sd: IRQ index 1 not found Fix this by using the platform_irq_count() helper to avoid touching non-existent interrupts. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-10-03drm/i915: use DRM_DEBUG_KMS() instead of drm_dbg(DRM_UT_KMS, ...)Jani Nikula
Unify on current common usage to allow repurposing drm_dbg() later. Fix newlines while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-2-jani.nikula@intel.com
2019-10-03drm/i915: use DRM_ERROR() instead of drm_err()Jani Nikula
Unify on current common usage to allow repurposing drm_err() later. Fix newlines while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002145405.27848-1-jani.nikula@intel.com
2019-10-03ACPI: HMAT: ACPI_HMAT_MEMORY_PD_VALID is deprecated since ACPI-6.3Daniel Black
ACPI-6.3 corresponds to when HMAT revision was bumped from 1 to 2. In this version ACPI_HMAT_MEMORY_PD_VALID was deprecated and made reserved. As such in revision 2+ we shouldn't be testing this flag. This is as per ACPI-6.3, 5.2.27.3, Table 5-145 "Memory Proximity Domain Attributes Structure" for Flags. Signed-off-by: Daniel Black <daniel@linux.ibm.com> Reviewed-by: Tao Xu <tao3.xu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-03Merge drm-misc-next-fixes-2019-10-02 into drm-misc-fixesMaxime Ripard
One tilcdc fix was left out in drm-misc-next-fixes and didn't make it during the merge window. Let's bring it into drm-misc-fixes. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03drm/omap: fix max fclk divider for omap36xxTomi Valkeinen
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jyri Sarha <jsarha@ti.com>
2019-10-02drm/i915: Fix g4x sprite scaling stride check with GTT remappingVille Syrjälä
I forgot to update the g4x sprite scaling stride check when GTT remapping was introduced. The stride of the original framebuffer is irrelevant when remapping is used and instead we want to check the stride of the remapped view. Also drop the duplicate width_bytes check. We already check that a few lines earlier. Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 006e570128f413759b9df64b51bae79903679c9b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-02drm/i915/dp: Fix dsc bpp calculations, v5.Maarten Lankhorst
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3. As a result our calculated bpp was way too high, and the link width limitation never came into effect. Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again. We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled. This fixes the FIFO underrun we are seeing with FEC enabled. Changes since v2: - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville) - Fix initial hardware readout for FEC. (Ville) Changes since v3: - Remove bogus fec_to_mode_clock. (Ville) Changes since v4: - Use the correct register for icl. (Ville) - Split hw readout to a separate patch. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: <stable@vger.kernel.org> # v5.0+ Cc: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit ed06efb801bd291e935238d3fba46fa03d098f0e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-02block: pg: add header include guardMasahiro Yamada
Add a header include guard just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-02net: stmmac: Avoid deadlock on suspend/resumeThierry Reding
The stmmac driver will try to acquire its private mutex during suspend via phylink_resolve() -> stmmac_mac_link_down() -> stmmac_eee_init(). However, the phylink configuration is updated with the private mutex held already, which causes a deadlock during suspend. Fix this by moving the phylink configuration updates out of the region of code protected by the private mutex. Fixes: 19e13cb27b99 ("net: stmmac: Hold rtnl lock in suspend/resume callbacks") Suggested-by: Bitan Biswas <bbiswas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03drm/i915/selftests: Exercise potential false lite-restoreChris Wilson
If execlists's lite-restore is based on the common GEM context tag rather than the per-intel_context LRCA, then a context switch between two intel_contexts on the same engine derived from the same GEM context will perform a lite-restore instead of a full context switch. We can exploit this by poisoning the ringbuffer of the first context and trying to trick a simple RING_TAIL update (i.e. lite-restore) v2: Also check what happens if preempt ce[0] with ce[1] (both instances on the same engine from the same parent context) [Tvrtko] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002183459.26614-1-chris@chris-wilson.co.uk
2019-10-02timer-of: don't use conditional expression with mixed 'void' typesLinus Torvalds
Randy Dunlap reports on the sparse list that sparse warns about this expression: of_irq->percpu ? free_percpu_irq(of_irq->irq, clkevt) : free_irq(of_irq->irq, clkevt); and honestly, sparse is correct to warn. The return type of free_percpu_irq() is 'void', while free_irq() returns a 'const void *' that is the devname argument passed in to the request_irq(). You can't mix a void type with a non-void types in a conditional expression according to the C standard. It so happens that gcc seems to accept it - and the resulting type of the expression is void - but there's really no reason for the kernel to have this kind of non-standard expression with no real upside. The natural way to write that expression is with an if-statement: if (of_irq->percpu) free_percpu_irq(of_irq->irq, clkevt); else free_irq(of_irq->irq, clkevt); which is more legible anyway. I'm not sure why that timer-of code seems to have this odd pattern. It does the same at allocation time, but at least there the types match, and it makes sense as an expression. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-02Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a broadcast-timer handling race that can result in spuriously and indefinitely delayed hrtimers and even RCU stalls if the system is otherwise quiet" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: broadcast-hrtimer: Fix a race in bc_set_next
2019-10-02Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull membarrier fix from Ingo Molnar: "Fix broken locking within membarrier_private_expedited()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: membarrier: Fix RCU locking bug caused by faulty merge
2019-10-02net: hisilicon: Fix usage of uninitialized variable in function ↵Yizhuo
mdio_sc_cfg_reg_write() In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02mips: Loongson: Fix the link time qualifier of 'serial_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: chenhc@lemote.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org
2019-10-02Input: goodix - add support for 9-bytes reportsYauhen Kharuzhy
Some variants of Goodix touchscreen firmwares use 9-bytes finger report format instead of common 8-bytes format. This report format may be present as: struct goodix_contact_data { uint8_t unknown1; uint8_t track_id; uint8_t unknown2; uint16_t x; uint16_t y; uint16_t w; }__attribute__((packed)); Add support for such format and use it for Lenovo Yoga Book notebook (which uses a Goodix touchpad as a touch keyboard). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-02MIPS: init: Prevent adding memory before PHYS_OFFSETThomas Bogendoerfer
On some SGI machines (IP28 and IP30) a small region of memory is mirrored to pyhsical address 0 for exception vectors while rest of the memory is reachable at a higher physical address. ARC PROM marks this region as reserved, but with commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") this chunk is used, when searching for start of ram, which breaks at least IP28 and IP30 machines. To fix this add_region_memory() checks for start address < PHYS_OFFSET and ignores these chunks. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-10-02MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem startThomas Bogendoerfer
Fix calculation of the size for reserving memory between PHYS_OFFSET and real memory start. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-10-02MIPS: VDSO: Fix build for binutils < 2.25Paul Burton
Versions of binutils prior to 2.25 are unable to link our VDSO due to an unsupported R_MIPS_PC32 relocation generated by the ".word _start - ." line of the inline asm in get_vdso_base(). As such, the intent is that when building with binutils older than 2.25 we don't build code for gettimeofday() & friends in the VDSO that rely upon get_vdso_base(). Commit 24640f233b46 ("mips: Add support for generic vDSO") converted us to using generic VDSO infrastructure, and as part of that the gettimeofday() functionality moved to a new vgettimeofday.c file. The check for binutils < 2.25 wasn't updated to handle this new filename, and so it continues trying to remove the old unused filename from the build. The end result is that we try to include the gettimeofday() code in builds that will fail to link. Fix this by updating the binutils < 2.25 case to remove vgettimeofday.c from obj-vdso-y, rather than gettimeofday.c. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-mips@vger.kernel.org
2019-10-02MIPS: VDSO: Remove unused gettimeofday.cPaul Burton
arch/mips/vdso/gettimeofday.c has been unused since commit 24640f233b46 ("mips: Add support for generic vDSO"). Remove the dead code. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-mips@vger.kernel.org
2019-10-02MIPS: Wire up clone3 syscallPaul Burton
Wire up the new clone3 syscall for MIPS, using save_static_function() to generate a wrapper that saves registers $s0-$s7 prior to invoking the generic sys_clone3 function just like we do for plain old clone. Tested atop 64r6el_defconfig using o32, n32 & n64 builds of the simple test program from: https://lore.kernel.org/lkml/20190716130631.tohj4ub54md25dys@brauner.io/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Christian Brauner <christian@brauner.io> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: linux-mips@vger.kernel.org
2019-10-02Input: da9063 - fix capability and drop KEY_SLEEPMarco Felsch
Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This caused input device to not generate any events if "dlg,disable-key-power" is set. Fix this by unconditionally setting KEY_POWER capability, and not declaring KEY_SLEEP. Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-02Merge tag 'erofs-for-5.4-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "Three patches to address regressions due to recent cleanups, mainly found by stress test on latest mainline kernel (no more regression out compared with older kernels for more than a week) One additional patch updates sub-entries in MAINTAINERS. Summary: - Fix error handling in erofs_read_superblock - Fix locking in erofs_get_meta_page - Fix inplace behavior due to decompression frontend cleanup - Update sub-entries in MAINTAINERS in order to better blame" * tag 'erofs-for-5.4-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix mis-inplace determination related with noio chain erofs: fix erofs_get_meta_page locking due to a cleanup MAINTAINERS: erofs: complete sub-entries for erofs erofs: fix return value check in erofs_read_superblock()
2019-10-02char/random: Add a newline at the end of the fileBorislav Petkov
On Tue, Oct 01, 2019 at 10:14:40AM -0700, Linus Torvalds wrote: > The previous state of the file didn't have that 0xa at the end, so you get that > > > -EXPORT_SYMBOL_GPL(add_bootloader_randomness); > \ No newline at end of file > +EXPORT_SYMBOL_GPL(add_bootloader_randomness); > > which is "the '-' line doesn't have a newline, the '+' line does" marker. Aaha, that makes total sense, thanks for explaining. Oh well, let's fix it then so that people don't scratch heads like me. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-02xen/xenbus: fix self-deadlock after killing user processJuergen Gross
In case a user process using xenbus has open transactions and is killed e.g. via ctrl-C the following cleanup of the allocated resources might result in a deadlock due to trying to end a transaction in the xenbus worker thread: [ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds. [ 2551.492215] Tainted: P OE 5.0.0-29-generic #5 [ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2551.528585] xenbus D 0 37 2 0x80000080 [ 2551.528590] Call Trace: [ 2551.528603] __schedule+0x2c0/0x870 [ 2551.528606] ? _cond_resched+0x19/0x40 [ 2551.528632] schedule+0x2c/0x70 [ 2551.528637] xs_talkv+0x1ec/0x2b0 [ 2551.528642] ? wait_woken+0x80/0x80 [ 2551.528645] xs_single+0x53/0x80 [ 2551.528648] xenbus_transaction_end+0x3b/0x70 [ 2551.528651] xenbus_file_free+0x5a/0x160 [ 2551.528654] xenbus_dev_queue_reply+0xc4/0x220 [ 2551.528657] xenbus_thread+0x7de/0x880 [ 2551.528660] ? wait_woken+0x80/0x80 [ 2551.528665] kthread+0x121/0x140 [ 2551.528667] ? xb_read+0x1d0/0x1d0 [ 2551.528670] ? kthread_park+0x90/0x90 [ 2551.528673] ret_from_fork+0x35/0x40 Fix this by doing the cleanup via a workqueue instead. Reported-by: James Dingwall <james@dingwall.me.uk> Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Remove the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). Patch from Florian Westphal. 2) Fix deadlock in nft_connlimit between packet path updates and the garbage collector. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02selftests: watchdog: Add command line option to show watchdog_infoGeorge G. Davis
With the new ioctl(WDIOC_GETSUPPORT) call in place, add a command line option to show the watchdog_info. Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 13:09:13 +0000