| Age | Commit message (Collapse) | Author |
|---|
|
Upgrade domain's handled access masks when creating a domain from a
ruleset, instead of converting them at runtime. This is more consistent
and helps with audit support.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-7-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Move LANDLOCK_ACCESS_FS_INITIALLY_DENIED, access_mask_t, struct
access_mask, and struct access_masks_all to a dedicated access.h file.
Rename LANDLOCK_ACCESS_FS_INITIALLY_DENIED to
_LANDLOCK_ACCESS_FS_INITIALLY_DENIED to make it clear that it's not part
of UAPI. Add some newlines when appropriate.
This file will be extended with following commits, and it will help to
avoid dependency loops.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-6-mic@digikod.net
[mic: Fix rebase conflict because of the new cleanup headers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Merge check_access_path() into current_check_access_path() and make
hook_path_mknod() use it.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250108154338.1129069-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Old toolchains require explicit -lpthread (e.g. on Debian 11).
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Fixes: c8994965013e ("selftests/landlock: Test signal scoping for threads")
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20250115145409.312226-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250114190600.846651-1-krzysztof.kozlowski@linaro.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rename the 'crossed_up' function argument to 'upward', which is more
proper English and a better match for representing temperature change
direction, everywhere in the code.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2360961.ElGaqSPkdT@rjwysocki.net
[ rjw: Rebased ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the regulation logic description from the bang_bang_trip_crossed()
kerneldoc to the preamble.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4987649.31r3eYUQgx@rjwysocki.net
[ rjw: Removed a trailing whitespace ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The names of :trip_crossed() callback functions in the Bang-bang and
User-space thermal governors don't match their current purpose any
more after previous changes, so rename them.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5859084.DvuYhMxLoT@rjwysocki.net
|
|
Introduce a new property to describe the power budget of the regulator.
This property will allow power management support for regulator consumers
like PSE controllers, enabling them to make decisions based on the
available power capacity.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-2-0a44b949e6bc@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce power budget management for the regulator device. Enable tracking
of available power capacity by providing helpers to request and release
power budget allocations.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-1-0a44b949e6bc@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- imx8mp-blk-ctrl: Add missing loop break condition
* tag 'pmdomain-v6.13-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx8mp-blk-ctrl: add missing loop break condition
|
|
Sync if_xdp.h uapi header to remove following warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'
Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250115032248.125742-1-yoong.siang.song@intel.com
|
|
Some versions of kernel were stripping out '.llvm.<hash>' suffix from
kerne symbols (produced by Clang LTO compilation) from function names
reported in available_filter_functions, while kallsyms reported full
original name. This confuses libbpf's multi-kprobe logic of finding all
matching kernel functions for specified user glob pattern by joining
available_filter_functions and kallsyms contents, because joining by
full symbol name won't work for symbols containing '.llvm.<hash>' suffix.
This was eventually fixed by [0] in the kernel, but we'd like to not
regress multi-kprobe experience and add a work around for this bug on
libbpf side, stripping kallsym's name if it matches user pattern and
contains '.llvm.' suffix.
[0] fb6a421fb615 ("kallsyms: Match symbols exactly with CONFIG_LTO_CLANG")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250117003957.179331-1-andrii@kernel.org
|
|
* for-next/perf: (29 commits)
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
drivers/perf: apple_m1: Map generic branch events
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
perf: imx9_perf: Introduce AXI filter version to refactor the driver and better extension
perf/arm-cmn: Permit more exhaustive groups
perf/dwc_pcie: Qualify RAS DES VSEC Capability by Vendor, Revision
drivers/perf: hisi: Delete redundant blank line of DDRC PMU
drivers/perf: hisi: Fix incorrect variable name "hha_pmu" in DDRC PMU driver
drivers/perf: hisi: Export associated CPUs of each PMU through sysfs
drivers/perf: hisi: Provide a generic implementation of cpumask/identifier
drivers/perf: hisi: Add a common function to retrieve topology from firmware
drivers/perf: hisi: Extract topology information to a separate structure
drivers/perf: hisi: Refactor the detection of associated CPUs
drivers/perf: hisi: Migrate to one online CPU if no associated one online
drivers/perf: hisi: Don't update the associated_cpus on CPU offline
drivers/perf: hisi: Define a symbol namespace for HiSilicon Uncore PMUs
perf/marvell: Odyssey LLC-TAD performance monitor support
perf/marvell: Refactor to extract platform data
...
|
|
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
|
|
* for-next/misc:
arm64: Remove duplicate included header
arm64/Kconfig: Drop EXECMEM dependency from ARCH_WANTS_EXECMEM_LATE
arm64: asm: Fix typo in pgtable.h
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Drop INIT_MM_CONTEXT()
|
|
* for-next/docs:
Documentation: arm64: Remove stale and redundant virtual memory diagrams
docs: arm64: Document EL3 requirements for FEAT_PMUv3
docs: arm64: Document EL3 requirements for cpu debug architecture
|
|
* for-next/cpufeature:
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
arm64/sysreg: Get rid of the TCR2_EL1x SysregFields
arm64/sysreg: Allow a 'Mapping' descriptor for system registers
arm64/cpufeature: Refactor conditional logic in init_cpu_ftr_reg()
arm64: cpufeature: Add HAFT to cpucap_is_possible()
|
|
* for-next/cca:
arm64: rsi: Add automatic arm-cca-guest module loading
|
|
Reduce duplicate code by using netlink helpers which return the
soft/hard interface directly. Instead of returning an interface index
which we are typically not interested in.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Merge the slab feature branch for 6.14:
- Move the kfree_rcu() implementation from RCU to SLAB subsystem
(Uladzislau Rezki)
|
|
Daniel Golle says:
====================
net: phy: realtek: fix status when link is down
The .read_status method for RealTek RTL822x PHYs (both C22 and C45) has
multilpe issues which result in reporting bogus link partner advertised
modes as well as speed and duplex while the link is down and no cable
is plugged in.
Example: ethtool after disconnecting a 1000M/Full capable link partner,
now with no wire plugged:
Settings for lan1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 7
Transceiver: external
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Link detected: no
Fix this by making sure all of the fields populated by
rtl822x_c45_read_status() or rtl822x_read_status() get reset, also in
case the link is down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear NBase-T link partner advertisement before calling
rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly
setting speed and duplex.
This fixes bogus 2.5G/5G/10G link partner advertisement and thus
speed and duplex being set by phy_resolve_aneg_linkmode() due to stale
NBase-T lpa.
Fixes: 68d5cd09e891 ("net: phy: realtek: change order of calls in C22 read_status()")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtlgen_decode_physr() which sets master_slave_state isn't called in case
the link is down and other than rtlgen_read_status(),
rtl822x_c45_read_status() doesn't implicitely clear master_slave_state.
Avoid stale master_slave_state by always setting it to
MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link
is down.
Fixes: 081c9c0265c9 ("net: phy: realtek: read duplex and gbit master from PHYSR register")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only read 1000Base-T link partner advertisement if autonegotiation has
completed and otherwise 1000Base-T link partner advertisement bits.
This fixes bogus 1000Base-T link partner advertisement after link goes
down (eg. by disconnecting the wire).
Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add check for the return value of clk_enable() to catch the potential
error.
Fixes: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20241215224752.220318-1-zmw12306@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 singleton hotfixes. 6 are MM.
Two are cc:stable and the remainder address post-6.12 issues"
* tag 'mm-hotfixes-stable-2025-01-16-21-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: check dir i_size in ocfs2_find_entry
mailmap: update entry for Ethan Carter Edwards
mm: zswap: move allocations during CPU init outside the lock
mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vma
mm: shmem: use signed int for version handling in casefold option
alloc_tag: skip pgalloc_tag_swap if profiling is disabled
mm: page_alloc: fix missed updates of lowmem_reserve in adjust_managed_page_count
|
|
Pull smb client fixes from Steve French:
- fix double free when reconnect racing with closing session
- fix SMB1 reconnect with password rotation
* tag '6.13-rc7-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix double free of TCP_Server_Info::hostname
cifs: support reconnect with alternate password for SMB1
|
|
Pull drm fixes from Dave Airlie:
"Final(?) set of fixes for 6.13, I think the holidays finally caught up
with everyone, the misc changes are 2 weeks worth, otherwise amdgpu
and xe are most of it. The largest pieces is a new test so I'm not too
worried about that.
kunit:
- Fix W=1 build for kunit tests
bridge:
- Handle YCbCr420 better in bridge code, with tests
- itee-it6263 error handling fix
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
xe:
- Add steering info support for GuC register lists
- Add means to wait for reset and synchronous reset
- Make changing ccs_mode a synchronous action
- Add missing mux registers
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU
i915:
- Relax clear color alignment to 64 bytes [fb]
v3d:
- Fix warn when unloading v3d
nouveau:
- Fix cross-device fence handling in nouveau
- Fix backlight regression for macbooks 5,1
vmwgfx:
- Fix BO reservation handling in vmwgfx"
* tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/xe: Mark ComputeCS read mode as UC on iGPU
drm/xe/oa: Add missing VISACTL mux registers
drm/xe: make change ccs_mode a synchronous action
drm/xe: introduce xe_gt_reset and xe_gt_wait_for_reset
drm/xe/guc: Adding steering info support for GuC register lists
drm/bridge: ite-it6263: Prevent error pointer dereference in probe()
drm/v3d: Ensure job pointer is set to NULL after job completion
drm/vmwgfx: Add new keep_resv BO param
drm/vmwgfx: Remove busy_places
drm/vmwgfx: Unreserve BO on error
drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}
drm/amdgpu: always sync the GFX pipe on ctx switch
drm/amdgpu: disable gfxoff with the compute workload on gfx12
drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX Isolation
drm/i915/fb: Relax clear color alignment to 64 bytes
drm/amd/display: Disable replay and psr while VRR is enabled
drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
nouveau/fence: handle cross device fences properly
drm/tests: connector: Add ycbcr_420_allowed tests
drm/connector: hdmi: Validate supported_formats matches ycbcr_420_allowed
...
|
|
Add simple CPU Freq driver for Airoha EN7581 SoC that control CPU
frequency scaling with SMC APIs and register a generic "cpufreq-dt"
device.
All CPU share the same frequency and can't be controlled independently.
CPU frequency is controlled by the attached PM domain.
Add SoC compatible to cpufreq-dt-plat block list as a dedicated cpufreq
driver is needed with OPP v2 nodes declared in DTS.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adopt __free() and guard() for trace_fprobe.c to remove gotos.
Link: https://lore.kernel.org/173708043449.319651.12242878905778792182.stgit@mhiramat.roam.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Daniel Xu says:
====================
Support eliding map lookup nullness
This patch allows progs to elide a null check on statically known map
lookup keys. In other words, if the verifier can statically prove that
the lookup will be in-bounds, allow the prog to drop the null check.
This is useful for two reasons:
1. Large numbers of nullness checks (especially when they cannot fail)
unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ.
2. It forms a tighter contract between programmer and verifier.
For (1), bpftrace is starting to make heavier use of percpu scratch
maps. As a result, for user scripts with large number of unrolled loops,
we are starting to hit jump complexity verification errors. These
percpu lookups cannot fail anyways, as we only use static key values.
Eliding nullness probably results in less work for verifier as well.
For (2), percpu scratch maps are often used as a larger stack, as the
currrent stack is limited to 512 bytes. In these situations, it is
desirable for the programmer to express: "this lookup should never fail,
and if it does, it means I messed up the code". By omitting the null
check, the programmer can "ask" the verifier to double check the logic.
=== Changelog ===
Changes in v7:
* Use more accurate frame number when marking precise
* Add test for non-stack key
* Test for marking stack slot precise
Changes in v6:
* Use is_spilled_scalar_reg() helper and remove unnecessary comment
* Add back deleted selftest with different helper to dirty dst buffer
* Check size of spill is exactly key_size and update selftests
* Read slot_type from correct offset into the spi
* Rewrite selftests in C where possible
* Mark constant map keys as precise
Changes in v5:
* Dropped all acks
* Use s64 instead of long for const_map_key
* Ensure stack slot contains spilled reg before accessing spilled_ptr
* Ensure spilled reg is a scalar before accessing tnum const value
* Fix verifier selftest for 32-bit write to write at 8 byte alignment
to ensure spill is tracked
* Introduce more precise tracking of helper stack accesses
* Do constant map key extraction as part of helper argument processing
and then remove duplicated stack checks
* Use ret_flag instead of regs[BPF_REG_0].type
* Handle STACK_ZERO
* Fix bug in bpf_load_hdr_opt() arg annotation
Changes in v4:
* Only allow for CAP_BPF
* Add test for stack growing upwards
* Improve comment about stack growing upwards
Changes in v3:
* Check if stack is (erroneously) growing upwards
* Mention in commit message why existing tests needed change
Changes in v2:
* Added a check for when R2 is not a ptr to stack
* Added a check for when stack is uninitialized (no stack slot yet)
* Updated existing tests to account for null elision
* Added test case for when R2 can be both const and non-const
====================
Link: https://patch.msgid.link/cover.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test that nullness elision works for common use cases. For example, we
want to check that both constant scalar spills and STACK_ZERO functions.
As well as when there's both const and non-const values of R2 leading up
to a lookup. And obviously some bound checks.
Particularly tricky are spills both smaller or larger than key size. For
smaller, we need to ensure verifier doesn't let through a potential read
into unchecked bytes. For larger, endianness comes into play, as the
native endian value tracked in the verifier may not be the bytes the
kernel would have read out of the key pointer. So check that we disallow
both.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/f1dacaa777d4516a5476162e0ea549f7c3354d73.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit allows progs to elide a null check on statically known map
lookup keys. In other words, if the verifier can statically prove that
the lookup will be in-bounds, allow the prog to drop the null check.
This is useful for two reasons:
1. Large numbers of nullness checks (especially when they cannot fail)
unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ.
2. It forms a tighter contract between programmer and verifier.
For (1), bpftrace is starting to make heavier use of percpu scratch
maps. As a result, for user scripts with large number of unrolled loops,
we are starting to hit jump complexity verification errors. These
percpu lookups cannot fail anyways, as we only use static key values.
Eliding nullness probably results in less work for verifier as well.
For (2), percpu scratch maps are often used as a larger stack, as the
currrent stack is limited to 512 bytes. In these situations, it is
desirable for the programmer to express: "this lookup should never fail,
and if it does, it means I messed up the code". By omitting the null
check, the programmer can "ask" the verifier to double check the logic.
Tests also have to be updated in sync with these changes, as the
verifier is more efficient with this change. Notable, iters.c tests had
to be changed to use a map type that still requires null checks, as it's
exercising verifier tracking logic w.r.t iterators.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/68f3ea96ff3809a87e502a11a4bd30177fc5823e.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, the verifier was treating all PTR_TO_STACK registers passed
to a helper call as potentially written to by the helper. However, all
calls to check_stack_range_initialized() already have precise access type
information available.
Rather than treat ACCESS_HELPER as a proxy for BPF_WRITE, pass
enum bpf_access_type to check_stack_range_initialized() to more
precisely track helper arguments.
One benefit from this precision is that registers tracked as valid
spills and passed as a read-only helper argument remain tracked after
the call. Rather than being marked STACK_MISC afterwards.
An additional benefit is the verifier logs are also more precise. For
this particular error, users will enjoy a slightly clearer message. See
included selftest updates for examples.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/ff885c0e5859e0cd12077c3148ff0754cad4f7ed.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
MEM_WRITE attribute is defined as: "Non-presence of MEM_WRITE means that
MEM is only being read". bpf_load_hdr_opt() both reads and writes from
its arg2 - void *search_res.
This matters a lot for the next commit where we more precisely track
stack accesses. Without this annotation, the verifier will make false
assumptions about the contents of memory written to by helpers and
possibly prune valid branches.
Fixes: 6fad274f06f0 ("bpf: Add MEM_WRITE attribute")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/730e45f8c39be2a5f3d8c4406cceca9d574cbf14.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The print was missing a newline.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/59cbe18367b159cd470dc6d5c652524c1dc2b984.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Divya Koppera says:
====================
Add PEROUT library for RDS PTP supported phys
Adds support for PEROUT library, where phy can generate
periodic output signal on supported pin out.
====================
Link: https://patch.msgid.link/20250115090634.12941-1-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
supported Microchip phys
Adds PEROUT feature for RDS PTP supported phys where
we can generate periodic output signal on supported
pin out
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-4-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds support for enabling pin out that is required
to generate periodic output signal on lan887x phy.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-3-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This ptp header file library changes will cover PEROUT
macros that are required to generate periodic output
from pin out
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20250115090634.12941-2-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following tests are failing on debug kernels:
tcp_tcp_info_tcp-info-rwnd-limited.pkt
tcp_tcp_info_tcp-info-sndbuf-limited.pkt
with reports like:
assert 19000 <= tcpi_sndbuf_limited <= 21000, tcpi_sndbuf_limited; \
AssertionError: 18000
and:
assert 348000 <= tcpi_busy_time <= 360000, tcpi_busy_time
AssertionError: 362000
Extend commit 912d6f669725 ("selftests/net: packetdrill: report benign
debug flakes as xfail") to cover them.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250115232129.845884-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: add phylink managed EEE support
Adding managed EEE support to phylink has been on the cards ever since
the idea in phylib was mooted. This overly large series attempts to do
so. I've included all the patches as it's important to get the driver
patches out there.
Patch 1 adds a definition for the clock stop capable bit in the PCS
MMD status register.
Patch 2 adds a phylib API to query whether the PHY allows the transmit
xMII clock to be stopped while in LPI mode. This capability is for MAC
drivers to save power when LPI is active, to allow them to stop their
transmit clock.
Patch 3 extracts a phylink internal helper for determining whether the
link is up.
Patch 4 adds basic phylink managed EEE support. Two new MAC APIs are
added, to enable and disable LPI. The enable method is passed the LPI
timer setting which it is expected to program into the hardware, and
also a flag ehther the transmit clock should be stopped.
I have taken the decision to make enable_tx_lpi() to return an error
code, but not do much with it other than report it - the intention
being that we can later use it to extend functionality if needed
without reworking loads of drivers.
I have also dropped the validation/limitation of the LPI timer, and
left that in the driver code prior to calling phylink_ethtool_set_eee().
The remainder of the patches convert mvneta, lan743x and stmmac, and
add support for mvneta.
====================
Link: https://patch.msgid.link/Z4gdtOaGsBhQCZXn@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert stmmac to use phylink managed EEE support rather than delving
into phylib:
1. Move the stmmac_eee_init() calls out of mac_link_down() and
mac_link_up() methods into the new mac_{enable,disable}_lpi()
methods. We leave the calls to stmmac_set_eee_pls() in place as
these change bits which tell the EEE hardware when the link came
up or down, and is used for a separate hardware timer. However,
symmetrically conditionalise this with priv->dma_cap.eee.
2. Update the current LPI timer each time LPI is enabled - which we
need for software-timed LPI.
3. With phylink managed EEE, phylink manages the receive clock stop
configuration via phylink_config.eee_rx_clk_stop_enable. Set this
appropriately which makes the call to phy_eee_rx_clock_stop()
redundant.
4. From what I can work out, all supported interfaces support LPI
signalling on stmmac (there's no restriction implemented.) It
also appears to support LPI at all full duplex speeds at or over
100M. Set these capabilities.
5. The default timer appears to be derived from a module parameter.
Set this the same, although we keep code that reconfigures the
timer in stmmac_init_phy().
6. Remove the direct call to phy_support_eee(), which phylink will do
on the drivers behalf if phylink_config.eee_enabled_default is set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEG-0014QH-9O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert lan743x to phylink managed EEE:
- Set the lpi_capabilties.
- Move the call to lan743x_mac_eee_enable() into the enable/disable
tx_lpi functions.
- Ensure that EEEEN is clear during probe.
- Move the setting of the LPI timer into mac_enable_tx_lpi().
- Move reading of LPI timer to phylink initialisation to set the
default timer value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEB-0014QB-4s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the netdev that we already have in lan743x_phylink_mac_link_down().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE5-0014Q5-Up@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add EEE support for mvpp2, using phylink's EEE implementation, which
means we just need to implement the two methods for LPI control, and
with the initial configuration. Only SGMII mode is supported, so only
100M and 1G speeds.
Disabling LPI requires clearing a single bit. Enabling LPI needs a full
configuration of several values, as the timer values are dependent on
the MAC operating speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert mvneta to use phylink's EEE implementation by implementing the
two LPI control methods, and adding the initial configuration and
capabilities.
Although disabling LPI requires clearing a single bit, for safety we
clear the manual mode and force bits to ensure that auto mode will be
used.
Enabling LPI needs a full configuration of several values, as the timer
values are dependent on the MAC operating speed, as per the original
code.
As Armada 388 states that EEE is only supported in "SGMII" modes, mark
this in lpi_interfaces. Testing with RGMII on the Clearfog platform
indicates that the receive path fails to detect LPI over RGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
