| Age | Commit message (Collapse) | Author |
|---|
|
The stacktrace event trigger is not dumping the stacktrace to the instance
where it was enabled, but to the global "instance."
Use the private_data, pointing to the trigger file, to figure out the
corresponding trace instance, and use it in the trigger action, like
snapshot_trigger does.
Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression with RFCOMM
- Fix regression with LE devices using Privacy (RPA)
- Fix regression with LE devices not waiting proper timeout to
establish connections
- Fix race in smp
* tag 'for-net-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Fix not using conn_timeout
Bluetooth: hci_sync: Fix hci_update_accept_list_sync
Bluetooth: assign len after null check
Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks
Bluetooth: fix data races in smp_unregister(), smp_del_chan()
Bluetooth: hci_core: Fix leaking sent_cmd skb
====================
Link: https://lore.kernel.org/r/20220224210838.197787-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple driver fixes in the clk subsystem
- Fix a hang due to bad clk parent in the Ingenic jz4725b driver
- Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that
shouldn't be touched"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: jz4725b: fix mmc0 clock gating
clk: qcom: gcc-msm8994: Remove NoC clocks
|
|
Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty
small.
core:
- edid: Always set RGB444
tegra:
- tegra186 suspend/resume fixes
- syncpoint wait fix
- build warning fix
- eDP on older devices fix
amdgpu:
- Display FP fix
- PCO powergating fix
- RDNA2 OEM SKU stability fixes
- Display PSR fix
- PCI ASPM fix
- Display link encoder fix for TEST_COMMIT
- Raven2 suspend/resume fix
- Fix a regression in virtual display support
- GPUVM eviction fix
i915:
- Fix QGV handling on ADL-P+
- Fix bw atomic check when switching between SAGV vs. no SAGV
- Disconnect PHYs left connected by BIOS on disabled ports
- Fix SAVG to no SAGV transitions on TGL+
- Print PHY name properly on calibration error (DG2)
imx:
- dcss: Select GEM CMA helpers
radeon:
- Fix some variables's type
vc4:
- Fix codec cleanup
- Fix PM reference counting"
* tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
drm/amdgpu: bypass tiling flag check in virtual display case (v2)
Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()"
drm/amdgpu: do not enable asic reset for raven2
drm/amd/display: Fix stream->link_enc unassigned during stream removal
drm/amd: Check if ASPM is enabled from PCIe subsystem
drm/edid: Always set RGB444
drm/tegra: dpaux: Populate AUX bus
drm/radeon: fix variable type
drm/amd/display: For vblank_disable_immediate, check PSR is really used
drm/amd/pm: fix some OEM SKU specific stability issues
drm/amdgpu: disable MMHUB PG for Picasso
drm/amd/display: Protect update_bw_bounding_box FPU code.
drm/i915/dg2: Print PHY name properly on calibration error
drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
drm/i915: Correctly populate use_sagv_wm for all pipes
drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
drm/i915: Widen the QGV point mask
drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER
drm/vc4: crtc: Fix runtime_pm reference counting
...
|
|
If the config options HAS_IOMEM is not set then the driver fails to link
with the following error:
clk-lan966x.c:(.text+0x950): undefined reference to
`devm_platform_ioremap_resource'
Therefor add missing dependencies: HAS_IOMEM and OF.
Fixes: 54104ee02333 ("clk: lan966x: Add lan966x SoC clock driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220219141536.460812-1-horatiu.vultur@microchip.com
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
TE-gpio, if defined, is placed in the panel's node, not the parent DSI
node. Change the devm_gpiod_get_optional() to gpiod_get_optional() and
pass proper device node to it. The code already has a proper cleanup
path, so it looks that the devm_* variant has been applied accidentally
during the conversion to gpiod API.
Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed a typo.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
TE-gpio is optional and if it is not found then gpiod_get_optional()
returns NULL. In such case the code will continue and try to convert NULL
gpiod to irq what in turn fails. The failure is then propagated and driver
is not registered.
Fix this by returning early from exynos_dsi_register_te_irq() if no
TE-gpio is found.
Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.
The recommended transition delay for mdss core gdsc updated for
SC7180/SC7280/SM8250.
Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180")
Fixes: 1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280")
Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-2-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: lowercase hex]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
GDSCs have multiple transition delays which are used for the GDSC FSM
states. Older targets/designs required these values to be updated from
gdsc code to certain default values for the FSM state to work as
expected. But on the newer targets/designs the values updated from the
GDSC driver can hamper the FSM state to not work as expected.
On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.
Thus add support to update the transition delay from the clock
controller gdscs as required.
Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Merge series from Krishna Yarlagadda <kyarlagadda@nvidia.com>:
Add ACPI support for Tegra210 QUAD SPI driver and a new compatilbe.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix double free in in the error path when opening perf.data from
multiple files in a directory instead of from a single file
- Sync the msr-index.h copy with the kernel sources
- Fix error when printing 'weight' field in 'perf script'
- Skip failing sigtrap test for arm+aarch64 in 'perf test'
- Fix failure to use a cpu list for uncore events in hybrid systems,
e.g. Intel Alder Lake
* tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf script: Fix error when printing 'weight' field
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf data: Fix double free in perf_session__delete()
perf evlist: Fix failed to use cpu list for uncore events
perf test: Skip failing sigtrap test for arm+aarch64
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 host:
- Expose KVM_CAP_ENABLE_CAP since it is supported
- Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
- Ensure async page fault token is nonzero
- Fix lockdep false negative
- Fix FPU migration regression from the AMX changes
x86 guest:
- Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
- reserve capability id (topic branch for ppc/kvm)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
KVM: x86/mmu: make apf token non-zero to fix bug
KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
x86/kvm: Fix compilation warning in non-x86_64 builds
x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
KVM: Fix lockdep false negative during host resume
KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17, round 2:
- Drop reset signal from i.MX8MM vpumix power domain to fix a system
hang.
- Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP
device tree.
- Fix a clock disabling imbalance in gpcv2 driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Device tree fixes for v5.17-rc6
This contains fixes for the eDP panel found on the Venice 2 and Nyan
boards.
* tag 'tegra-for-5.17-arm-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move panels to AUX bus
Link: https://lore.kernel.org/r/20220223162209.293722-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A
board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well
as a number of dtschema fixes to make the reduce the number of errors.
* tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
ARM: dts: rockchip: reorder rk322x hmdi clocks
arm64: dts: rockchip: reorder rk3399 hdmi clocks
arm64: dts: rockchip: align pl330 node name with dtschema
arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage
arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568
arm64: dts: rockchip: fix dma-controller node names on rk356x
Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Fix a merge error that broke PCI device enumeration on mvebu
platforms, including Turris Omnia (Armada 385) (Pali Rohár)
- Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some
VBIOSes don't account for "harvested" (disabled) parts of the chip
when initializing caches (Alex Deucher)
* tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
PCI: mvebu: Fix device enumeration regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
|
|
When using hci_le_create_conn_sync it shall wait for the conn_timeout
since the connection complete may take longer than just 2 seconds.
Also fix the masking of HCI_EV_LE_ENHANCED_CONN_COMPLETE and
HCI_EV_LE_CONN_COMPLETE so they are never both set so we can predict
which one the controller will use in case of HCI_OP_LE_CREATE_CONN.
Fixes: 6cd29ec6ae5e3 ("Bluetooth: hci_sync: Wait for proper events when connecting LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Add support for Tegra234 and soc data to select capabilities.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20220222175611.58051-4-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string for Tegra234 for Tegra QUAD SPI
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20220222175611.58051-3-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use device_reset api to replace duplicate code in driver to call
reset_control_get api with reset handle.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20220222175611.58051-2-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
hci_update_accept_list_sync is returning the filter based on the error
but that gets overwritten by hci_le_set_addr_resolution_enable_sync
return instead of using the actual result of the likes of
hci_le_add_accept_list_sync which was intended.
Fixes: ad383c2c65a5b ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
len should be assigned after a null check
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Since bt_skb_sendmmsg can be used with the likes of SOCK_STREAM it
shall return the partial chunks it could allocate instead of freeing
everything as otherwise it can cause problems like bellow.
Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/d7206e12-1b99-c3be-84f4-df22af427ef5@molgen.mpg.de
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215594
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> (Nokia N9 (MeeGo/Harmattan)
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Previous commit e04480920d1e ("Bluetooth: defer cleanup of resources
in hci_unregister_dev()") defers all destructive actions to
hci_release_dev() to prevent cocurrent problems like NPD, UAF.
However, there are still some exceptions that are ignored.
The smp_unregister() in hci_dev_close_sync() (previously in
hci_dev_do_close) will release resources like the sensitive channel
and the smp_dev objects. Consider the situations the device is detaching
or power down while the kernel is still operating on it, the following
data race could take place.
thread-A hci_dev_close_sync | thread-B read_local_oob_ext_data
|
hci_dev_unlock() |
... | hci_dev_lock()
if (hdev->smp_data) |
chan = hdev->smp_data |
| chan = hdev->smp_data (3)
|
hdev->smp_data = NULL (1) | if (!chan || !chan->data) (4)
... |
smp = chan->data | smp = chan->data
if (smp) |
chan->data = NULL (2) |
... |
kfree_sensitive(smp) |
| // dereference smp trigger UFA
That is, the objects hdev->smp_data and chan->data both suffer from the
data races. In a preempt-enable kernel, the above schedule (when (3) is
before (1) and (4) is before (2)) leads to UAF bugs. It can be
reproduced in the latest kernel and below is part of the report:
[ 49.097146] ================================================================
[ 49.097611] BUG: KASAN: use-after-free in smp_generate_oob+0x2dd/0x570
[ 49.097611] Read of size 8 at addr ffff888006528360 by task generate_oob/155
[ 49.097611]
[ 49.097611] Call Trace:
[ 49.097611] <TASK>
[ 49.097611] dump_stack_lvl+0x34/0x44
[ 49.097611] print_address_description.constprop.0+0x1f/0x150
[ 49.097611] ? smp_generate_oob+0x2dd/0x570
[ 49.097611] ? smp_generate_oob+0x2dd/0x570
[ 49.097611] kasan_report.cold+0x7f/0x11b
[ 49.097611] ? smp_generate_oob+0x2dd/0x570
[ 49.097611] smp_generate_oob+0x2dd/0x570
[ 49.097611] read_local_oob_ext_data+0x689/0xc30
[ 49.097611] ? hci_event_packet+0xc80/0xc80
[ 49.097611] ? sysvec_apic_timer_interrupt+0x9b/0xc0
[ 49.097611] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 49.097611] ? mgmt_init_hdev+0x1c/0x240
[ 49.097611] ? mgmt_init_hdev+0x28/0x240
[ 49.097611] hci_sock_sendmsg+0x1880/0x1e70
[ 49.097611] ? create_monitor_event+0x890/0x890
[ 49.097611] ? create_monitor_event+0x890/0x890
[ 49.097611] sock_sendmsg+0xdf/0x110
[ 49.097611] __sys_sendto+0x19e/0x270
[ 49.097611] ? __ia32_sys_getpeername+0xa0/0xa0
[ 49.097611] ? kernel_fpu_begin_mask+0x1c0/0x1c0
[ 49.097611] __x64_sys_sendto+0xd8/0x1b0
[ 49.097611] ? syscall_exit_to_user_mode+0x1d/0x40
[ 49.097611] do_syscall_64+0x3b/0x90
[ 49.097611] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 49.097611] RIP: 0033:0x7f5a59f51f64
...
[ 49.097611] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5a59f51f64
[ 49.097611] RDX: 0000000000000007 RSI: 00007f5a59d6ac70 RDI: 0000000000000006
[ 49.097611] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 49.097611] R10: 0000000000000040 R11: 0000000000000246 R12: 00007ffec26916ee
[ 49.097611] R13: 00007ffec26916ef R14: 00007f5a59d6afc0 R15: 00007f5a59d6b700
To solve these data races, this patch places the smp_unregister()
function in the protected area by the hci_dev_lock(). That is, the
smp_unregister() function can not be concurrently executed when
operating functions (most of them are mgmt operations in mgmt.c) hold
the device lock.
This patch is tested with kernel LOCK DEBUGGING enabled. The price from
the extended holding time of the device lock is supposed to be low as the
smp_unregister() function is fairly short and efficient.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
sent_cmd memory is not freed before freeing hci_dev causing it to leak
it contents.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Make Documentation/admin-guide/reporting-issues.rst point to the newly
created document about regressions
(Documentation/admin-guide/regressions-regressions.rst). This allows to
shorten a few explanations the new document describes better and in more
detail.
While at it move the copyright hint to the end of the file and remove
quotes around links to other places in the documentation. Both issues
came up during the review of the new documents about regressions.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/f20114eaddc356a8c79dd62812a6c7f4ca5d87b9.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a section with a few rules of thumb about how
quickly developers should address regressions to
Documentation/process/handling-regressions.rst; additionally,
add a short paragraph about this to the companion document
Documentation/admin-guide/reporting-regressions.rst as well.
The rules of thumb were written after studying the quotes from Linus
found in handling-regressions.rst and especially influenced by
statements like "Users are literally the _only_ thing that matters" and
"without users, your program is not a program, it's a pointless piece of
code that you might as well throw away". The author interpreted those in
perspective to how the various Linux kernel series are maintained
currently and what those practices might mean for users running into a
regression on a small or big kernel update.
That for example lead to the paragraph starting with "Aim to get fixes
for regressions mainlined within one week after identifying the culprit,
if the regression was introduced in a stable/longterm release or the
devel cycle for the latest mainline release". Some might see this as
pretty high bar, but on the other hand something like that is needed to
not leave users out in the cold for too long -- which can quickly happen
when updating to the latest stable series, as the previous one is
normally stamped "End of Life" about three or four weeks after a new
mainline release. This makes a lot of users switch during this
timeframe. Any of them thus risk running into regressions not promptly
fixed; even worse, once the previous stable series is EOLed for real,
users that face a regression might be left with only three options:
(1) continue running an outdated and thus potentially insecure kernel
version from an abandoned stable series
(2) run the kernel with the regression
(3) downgrade to an earlier longterm series still supported
This is better avoided, as (1) puts users and their data in danger, (2)
will only be possible if it's a minor regression that doesn't interfere
with booting or serious usage, and (3) might be regression itself or
impossible on the particular machine, as the users might require drivers
or features only introduced after the latest longterm series branched
of.
In the end this lead to the aforementioned "Aim to fix regression within
one week" part. It's also the reason for the "Try to resolve any
regressions introduced in the current development cycle before its
end.".
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/a7b717b52c0d54cdec9b6daf56ed6669feddee2c.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Create two documents explaining various aspects around regression
handling and tracking; one is aimed at users, the other targets
developers.
The texts among others describes the first rule of Linux kernel
development and what it means in practice. They also explain what a
regression actually is and how to report one properly.
Both texts additionally provide a brief introduction to the bot the
kernel's regression tracker uses to facilitate the work, but mention the
use is optional.
To sum things up, provide a few quotes from Linus in the document for
developers to show how serious we take regressions.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/34e56d3588f22d7e0b4d635ef9c9c3b33ca4ac04.1644994117.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit f7df2b1cf03a ("tools/vm/page_owner_sort.c: count and sort by mem")
added a literal text block without the necessary markup, leading to these
warnings in the docs build:
Documentation/vm/page_owner.rst:92: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:96: WARNING: Unexpected indentation.
Documentation/vm/page_owner.rst:107: WARNING: Unexpected indentation.
Add the necessary colons and make the build quieter.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix QGV handling on ADL-P+ (Ville Syrjälä)
- Fix bw atomic check when switching between SAGV vs. no SAGV (Ville Syrjälä)
- Disconnect PHYs left connected by BIOS on disabled ports (Imre Deak)
- Fix SAVG to no SAGV transitions on TGL+ (Ville Syrjälä)
- Print PHY name properly on calibration error (DG2) (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhdyHwRWkOTWwlqi@tursulin-mobl2
|
|
Use past tense as the fonts can be installed after the fact.
Add suggestion to install "Noto Sans CJK" and "Noto Serif CJK"
font families. ("Noto Serif CJK" is optional.)
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/dfefa601-c58d-c86c-953f-5e4454db9409@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Expand comments in LaTeX code and mention some of important points
told in changelogs of conf.py changes.
Hopefully they can help future contributors in this area.
No code change involved.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/bce9261b-1950-3146-07b2-07bd2ec79158@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Quote from Jon's remark [1]:
I do notice that Documentation/conf.py is getting large and
unapproachable. At some future point, it might be nice to pull
all of the latex stuff out into a separate file where it won't
scare people who stumble into it by accident.
Pull LaTeX preamble settings added since commit 3b4c963243b1 ("docs:
conf.py: adjust the LaTeX document output") out into
sphinx/kerneldoc-preamble.sty.
It will be copied to the build directory by the added
"latex_additional_files" setting in conf.py.
As a bonus, LaTeX/TeX code can be maintained without escaping backslashes.
To compensate the loss of change history in sphinx/kerneldoc-preamble.sty,
here is a list of changes made in conf.py:
- f7ebe6b76940 ("docs: Activate exCJK only in CJK chapters")
- 0afd4df0d16a ("docs: pdfdocs: Prevent column squeezing by tabulary")
- 659653c9e546 ("docs: pdfdocs: Refactor config for CJK document")
- e291ff6f5a03 ("docs: pdfdocs: Add CJK-language-specific font settings")
- 7eb368cc319b ("docs: pdfdocs: Choose Serif font as CJK mainfont if possible")
- 35382965bdd2 ("docs: pdfdocs: Preserve inter-phrase space in Korean translations")
- 77abc2c230b1 ("docs: pdfdocs: One-half spacing for CJK translations")
- 788d28a25799 ("docs: pdfdocs: Permit AutoFakeSlant for CJK fonts")
- 29ac9822358f ("docs: pdfdocs: Teach xeCJK about character classes of quotation marks")
- 7c5c18bdb656 ("docs: pdfdocs: Fix typo in CJK-language specific font settings")
- aa872e0647dc ("docs: pdfdocs: Adjust \headheight for fancyhdr")
- 8716ef413aa5 ("docs: pdfdocs: Tweak width params of TOC")
- 66939df53948 ("docs: pdfdocs: Switch default CJK font to KR variants")
- 7b686a2ea1e4 ("docs: pdfdocs: Enable CJKspace in TOC for Korean titles")
- 5d9158e3c762 ("docs/translations: Skip CJK contents if suitable fonts not found")
- b774cc46313b ("docs: pdfdocs: Move CJK monospace font setting to main conf.py")
[1]: https://lore.kernel.org/all/87zgmr66cn.fsf@meer.lwn.net/
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/aaa9dca1-27c0-c414-77f3-c5587db0cc5b@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
__make_request() and end_that_request_last() do no longer exist. Replace
them with the current call-site.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviwed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220222012751.1933194-1-naohiro.aota@wdc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There are some words that need to be fixed.
Thanks for Shuah Khan's constructive suggestions.
The text has been fixed as follows.
a. So, if you'd like to use it, you need
to add "page_owner=on" into your boot cmdline.
Here, "into" has been replaced with "to".
b. ...page owner is disabled in runtime due to no
enabling, boot option, runtime overhead is marginal.
Here, "no" has been replaced with "not".
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220223134104.2663-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request:
- send H2CData PDUs based on MAXH2CDATA (Varun Prakash)
- fix passthrough to namespaces with unsupported features (Christoph
Hellwig)
- Clear iocb->private at poll completion (Stefano)
* tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block:
nvme-tcp: send H2CData PDUs based on MAXH2CDATA
nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
nvme: don't return an error from nvme_configure_metadata
block: clear iocb->private in blkdev_bio_end_io_async()
|
|
It is easy to hit the below memory leaks in my TigerLake platform:
unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30
Fix it by calling kfree() accordingly.
Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, when there is no FILE argument following a switch such
as -man, -rst, or -none, kernel-doc exits with a warning from perl
(long msg folded):
Use of uninitialized value $ARGV[0] in pattern match (m//)
at ./scripts/kernel-doc line 438.
, which is unhelpful.
Improve the behavior by adding a check at the bottom of parsing
loop.
If the argument is absent, display help text and exit with
the code of 1 (via usage()).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/7b136049-a3ba-0eb5-8717-364d773ff914@gmail.com
[jc: reworked to fix conflict with pod patches]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull io_uring fixes from Jens Axboe:
- Add a conditional schedule point in io_add_buffers() (Eric)
- Fix for a quiesce speedup merged in this release (Dylan)
- Don't convert to jiffies for event timeout waiting, it's way too
coarse when we accept a timespec as input (me)
* tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block:
io_uring: disallow modification of rsrc_data during quiesce
io_uring: don't convert to jiffies for waiting on timeouts
io_uring: add a schedule point in io_add_buffers()
|
|
Pull DTPM (Dynamic Thermal Power Management) changes for 5.18-rc1 from
Daniel Lezcano:
"- Added dtpm hierarchy description (Daniel Lezcano)
- Changed the locking scheme (Daniel Lezcano)
- Fixed dtpm_cpu cleanup at exit time and missing virtual dtpm pointer
release (Daniel Lezcano)"
* tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux:
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for 5.18-rc6 from Viresh Kumar:
"This fixes issues related to throttle IRQ for Qcom SoCs."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull more x86 platform driver fixes from Hans de Goede:
"Two more fixes:
- Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16
- Fix Microsoft Surface 3 battery readings"
* tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
surface: surface3_power: Fix battery readings on batteries without a serial number
platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup
|
|
Obtaining a MAC address may be deferred in cases when the MAC is stored
in an NVMEM block, for example, and it may not be ready upon the first
retrieval attempt and return EPROBE_DEFER.
It is also possible that a port that does not rely on NVMEM has been
already created when getting the defer request. Thus, also the resources
allocated previously must be freed when doing a roll-back.
Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
default value when tsc scaling disabled
If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should
never have non default value.
Due to way nested tsc scaling support was implmented in qemu,
it would set this msr to 0 when nested tsc scaling was disabled.
Ignore that value for now, as it causes no harm.
Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220223115649.319134-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
