summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-12net: fec_mpc52xx: Read MAC address from device-treeStefan Roese
Until now, the MPC5200 FEC ethernet driver relied upon the bootloader (U-Boot) to write the MAC address into the ethernet controller registers. The Linux driver should not rely on such a thing. So lets read the MAC address from the DT as it should be done here. The following priority is now used to read the MAC address: 1) First, try OF node MAC address, if not present or invalid, then: 2) Read from MAC address registers, if invalid, then: 3) Log a warning message, and choose a random MAC address. This fixes a problem with a MPC5200 board that uses the SPL U-Boot version without FEC initialization before Linux booting for boot speedup. Additionally a status line is now be printed upon successful driver probing, also displaying this MAC address. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12cxgb4vf: Fix VLAN extraction counter incrementVipul Pandya
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: dual emac interface implementationMugunthan V N
The CPSW switch can act as Dual EMAC by segregating the switch ports using VLAN and port VLAN as per the TRM description in 14.3.2.10.2 Dual Mac Mode Following CPSW components will be common for both the interfaces. * Interrupt source is common for both eth interfaces * Interrupt pacing is common for both interfaces * Hardware statistics is common for all the ports * CPDMA is common for both eth interface * CPTS is common for both the interface and it should not be enabled on both the interface as timestamping information doesn't contain port information. Constrains * Reserved VID of One port should not be used in other interface which will enable switching functionality * Same VID must not be used in both the interface which will enable switching functionality Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: cpsw: make cpts as pointerMugunthan V N
As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as pointer. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12driver: net: ethernet: davinci_cpdma: add support for directed packet and ↵Mugunthan V N
source port detection * Introduced parameter to add port number for directed packet in cpdma_chan_submit * Source port detection macro with DMA descriptor status Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is another handful of late-breaking fixes intended for the 3.8 stream... Hopefully the will still make it! :-) There are three mac80211 fixes pulled from Johannes: "Here are three fixes still for the 3.8 stream, the fix from Cong Ding for the bad sizeof (Stephen Hemminger had pointed it out before but I'd promptly forgotten), a mac80211 managed-mode channel context usage fix where a downgrade would never stop until reaching non-HT and a bug in the channel determination that could cause invalid channels like HT40+ on channel 11 to be used." Also included is a mwl8k fix that avoids an oops when using mwl8k devices that only support the 5 GHz band. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12pstore: Create a convenient mount point for pstoreJosh Boyer
Using /dev/pstore as a mount point for the pstore filesystem is slightly awkward. We don't normally mount filesystems in /dev/ and the /dev/pstore file isn't created automatically by anything. While this method will still work, we can create a persistent mount point in sysfs. This will put pstore on par with things like cgroups and efivarfs. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6Alexander Duyck
The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: fix infinite loop in __skb_recv_datagram()Eric Dumazet
Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf745 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: qmi_wwan: add Yota / Megafon M100-1 4g modemBjørn Mork
Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: sctp: remove unused multiple cookie keysDaniel Borkmann
Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12efi_pstore: Introducing workqueue updating sysfsSeiji Aguchi
[Problem] efi_pstore creates sysfs entries, which enable users to access to NVRAM, in a write callback. If a kernel panic happens in an interrupt context, it may fail because it could sleep due to dynamic memory allocations during creating sysfs entries. [Patch Description] This patch removes sysfs operations from a write callback by introducing a workqueue updating sysfs entries which is scheduled after the write callback is called. Also, the workqueue is kicked in a just oops case. A system will go down in other cases such as panic, clean shutdown and emergency restart. And we don't need to create sysfs entries because there is no chance for users to access to them. efi_pstore will be robust against a kernel panic in an interrupt context with this patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12efivars: Disable external interrupt while holding efivars->lockSeiji Aguchi
[Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-12x86, mm: Redesign get_user with a __builtin_choose_expr hackH. Peter Anvin
Instead of using a bitfield, use an odd little trick using typeof, __builtin_choose_expr, and sizeof. __builtin_choose_expr is explicitly defined to not convert its type (its argument is required to be a constant expression) so this should be well-defined. The code is still not 100% preturbation-free versus the baseline before 64-bit get_user(), but the differences seem to be very small, mostly related to padding and to gcc deciding when to spill registers. Cc: Jamie Lokier <jamie@shareable.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. J. Lu <hjl.tools@gmail.com> Link: http://lkml.kernel.org/r/511A8922.6050908@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12Merge branch 'timers/for-arm' into timers/coreThomas Gleixner
2013-02-12clockevents: Fix generic broadcast for FEAT_C3STOPMark Rutland
Commit 12ad100046: "clockevents: Add generic timer broadcast function" made tick_device_uses_broadcast set up the generic broadcast function for dummy devices (where !tick_device_is_functional(dev)), but neglected to set up the broadcast function for devices that stop in low power states (with the CLOCK_EVT_FEAT_C3STOP flag). When these devices enter low power states they will not have the generic broadcast function assigned, and will bring down the system when an attempt is made to broadcast to them. This patch ensures that the broadcast function is also assigned for devices which require broadcast in low power states. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Marc.Zyngier@arm.com Cc: Will.Deacon@arm.com Cc: santosh.shilimkar@ti.com Cc: john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-12ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrlShirish S
This patch corrects the pin function value of sd4_bus8 from 3 to 4. This is verified on origen board for testing eMMC on dw_mci controller. Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-12ARM: SAMSUNG: Silence empty switch warning in fimc-core.hSachin Kamat
Add 'default' case to silence the below warning: arch/arm/plat-samsung/include/plat/fimc-core.h:25:9: warning: switch with no cases Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-12ARM: SAMSUNG: Silence empty switch warning in sdhci.hSachin Kamat
Add 'default' case to silence the following warning: arch/arm/plat-samsung/include/plat/sdhci.h:356:9: warning: switch with no cases Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-02-12clk: tegra: local arrays should be staticPeter De Schrijver
cclk_g_parents, cclk_lp_parents and sclk_parents are only accessed from within clk-tegra30.c. Declare them static to avoid namespace polution. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Add missing spinlock for hclk and pclkPeter De Schrijver
The hclk and pclk clocks are controlled by the same register. Hence a lock is required to avoid corruption. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Implement locking for super clockPeter De Schrijver
Although tegra_clk_register_super_mux() has a lock parameter, the lock is not actually used by the code. Fixed with this patch. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: fix wrong clock index between se to sata_coldJoseph Lo
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to sata_cold. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Three nouveau fixes, all user visible issues, and one radeon regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: enforce use of radeon_get_ib_value when reading user cmd drm/nouveau: add lockdep annotations drm/nv50/fb: Fix nullptr-deref on IGPs drm/nouveau: use different register to wait for secret scrubber
2013-02-12ALSA: hda - Fix broken workaround for HDMI/SPDIF conflictsTakashi Iwai
The commit [dcda58061: ALSA: hda - Add workaround for conflicting IEC958 controls] introduced a workaround for cards that have both SPDIF and HDMI devices for giving device=1 to SPDIF control elements. It turned out, however, that this workaround doesn't work well - - The workaround checks only conflicts in a single codec, but SPDIF and HDMI are provided by multiple codecs in many cases, and - ALSA mixer abstraction doesn't care about the device number in ctl elements, thus you'll get errors from amixer such as % amixer scontrols -c 0 ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958 Playback Switch',0,1,0) appears twice or more amixer: Mixer hw:0 load error: Invalid argument This patch fixes the previous broken workaround. Instead of changing the device number of SPDIF ctl elements, shift the element indices of such controls up to 16. Also, the conflict check is performed over all codecs found on the bus. HDMI devices will be put to dev=0,index=0 as before. Only the conflicting SPDIF device is moved to a different place. The new place of SPDIF device is supposed by the updated alsa-lib HDA-Intel.conf, respectively. Reported-by: Stephan Raue <stephan@openelec.tv> Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> [v3.8] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12rtlwifi: Initialize rate_init member of struct rate_control_opsCatalin Iacob
This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-12iwlwifi: mvm: beautify code in rx_handlersEmmanuel Grumbach
Make the code more readable, and while at it also add a missing "break" to avoid checking handlers that cannot be used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: update station when marked associatedJohannes Berg
In managed mode, the HT/VHT capabilities aren't set when the station is initially added, so update the station when it is marked associated. In AP/GO mode, the station will typically be added with full capabilities today, but an upcoming change in hostapd may mean a similar scenario as for managed mode, therefore do the update unconditionally. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't wait for session protection to startJohannes Berg
Now that mac80211 no longer starts the auth/assoc timeouts when it transmits the frame, but only when the frame status arrives, we no longer need to wait for the session protection time event to start, we can schedule it and enqueue the auth/assoc frame right away. This reduces the amount of time we block mac80211's workqueue. Also, since now we no longer need different behavior for session protection and P2P time events, refactor the code to have just a common implementation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: don't delay the association until after beaconJohannes Berg
If we haven't heard a beacon before we associate we can still start the association process and set the MAC in the firmware to associated only after having received a beacon with DTIM period by reacting to the new change flag (BSS_CHANGED_DTIM_PERIOD) from mac80211. This reduces the association time in these cases. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: apply beacon changes immediatelyJohannes Berg
If the AP/GO beacon changes, apply such a change immediately, otherwise the AP/GO beacon can be stale for a long time. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: mvm: report wakeup reasonsJohannes Berg
Query the wakeup reasons properly and then report them to mac80211. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12iwlwifi: dvm: query and report WoWLAN wakeup reasonJohannes Berg
Implement proper WoWLAN wakeup and query the wakeup reasons, then report them to userspace. Note that this is tricky: a firmware bug (that has been fixed in later versions) means that the status command response isn't properly closed in hardware and thus won't arrive at the host. Sending another command after it closes the status response but the next command gets stuck, etc. We reset the device after querying though, so this is not a big issue, just makes for strange code. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-02-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-12iwlwifi: mvm: use atomic interface iteration to avoid deadlockEmmanuel Grumbach
Using the non-atomic version creates a dependency between mac80211's iflist_mtx and mvm->mutex. Use the atomic version instead which doesn't take iflist_mtx but can't sleep, so send the HCMD in ASYNC. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12mfd: db8500-prcmu: update resource passingLinus Walleij
When trying to get rid of the cross-includes of <mach/id.h> from different drivers, so we can localize ASIC/CPU detection to the mach-ux500 folder, we run into the way the PRCMU handles base addresses and firmware detection. This patch updates the firmware version detection to pass the required information as platform data instead of relying on cpu_is_* macros. Now the PRCMU base address, the secondary TCDM area, the TCPM area and the IRQ are passed as resources instead of being grabbed from <mach/*> files. Incidentally this also removes part of the reliance on <mach/irqs.h>. Further it updates the firmware version detection, since the location of the firmware ID bytes in the designated memory are is now passed from the platform data instead. There is no reason not to include the nice split-off of a struct to hold the firmware information and a separate function to populate it. The patch actually rids the need to use the external db8500_prcmu_early_init call at all, but I'm keepin back that removal as I don't want the patch to be too big. Cc: arm@kernel.org Cc: Michel Jaoen <michel.jaouen@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Loic Pallardy <loic.pallardy@stericsson.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-12drivers/db8500-cpufreq: delete dangling includeLinus Walleij
There was a dangling #include <mach/id.h> in the cpufreq file missing from commit 7a4f26097d389c16c9956bc03b81532698d97d64 "ARM: ux500: de-globalize <mach/id.h>" Causing build regressions when building with cpufreq support. Cc: arm@kernel.org Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-12ALSA: hda/ca0132 - Add missing \n to debug printsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESSTakashi Iwai
The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as an unsigned long. This makes dsp_chip_to_dsp_addx() misbehaving on 64bit architectures. Fix the INVALID_CHIP_ADDRESS definition to be 32bit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - update documentation for no-primary-hp fixupFernando Luis Vázquez Cao
The problem addressed by this fixup is not specific to Vaio Z, affecting some Vaio all-in-one desktop PCs too. Update the code comments accordingly. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - Workaround for silent output on Sony Vaio VGC-LN51JGB with ALC889Fernando Luis Vázquez Cao
Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by the same issue that caused Vaio Z laptops to become silent: the speaker pin must be connected to the first DAC even though the codec itself advertises flexible routing through any of the DACs. Use the no-primary-hp fixup for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Cc: stable@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12mac80211: allow driver to be stateless wrt. SMSP requestsEmmanuel Grumbach
Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12nl80211: minor correction in sample wowlan mask calculationAmitkumar Karwar
The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12ARM: imx_v4_v5_defconfig: Add VPU supportFabio Estevam
Let the VPU driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-12ARM: imx: configs: enable netfilter supportJavier Martinez Canillas
The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-11x86: Be consistent with data size in getuser.SH. Peter Anvin
Consistently use the data register by name and use a sized assembly instruction in getuser.S. There is never any reason to macroize it, and being inconsistent in the same file is just annoying. No actual code change. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2013-02-12drm/radeon: enforce use of radeon_get_ib_value when reading user cmdJerome Glisse
When ever parsing cmd buffer supplied by userspace we need to use radeon_get_ib_value rather than directly accessing the ib as the user cmd might not yet be copied into the ib thus the parser might read value that does not correspond to what user is sending and possibly allowing user to send malicious command undected. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:55:28 +0000