summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-14Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()Kevin Cernekee
This allows alps_identify() to override these settings based on the device characteristics, if it is ever necessary. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - use function pointers for different protocol handlersKevin Cernekee
In anticipation of adding more ALPS protocols and more per-device quirks, use function pointers instead of switch statements to call functions that differ from one device to the next. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection sequenceKevin Cernekee
If the E6 report test passes, get the E7 and EC reports right away and then try to match an entry in the table. Pass in the alps_data struct, so that the detection code will be able to set operating parameters based on information found during detection. Change the version (psmouse->model) to report the protocol version only, in preparation for supporting models that do not show up in the ID table. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - introduce helper function for repeated commandsKevin Cernekee
Several ALPS driver init sequences repeat a command three times, then issue PSMOUSE_CMD_GETINFO to read the result. Move this into a helper function to simplify the code. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move alps_get_model() down below hw_init codeKevin Cernekee
This will minimize the number of forward declarations needed when alps_get_model() starts assigning function pointers. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - copy "model" info into alps_data structKevin Cernekee
Not every type of ALPS touchpad is well-suited to table-based detection. Start moving the various alps_model_data attributes into the alps_data struct so that we don't need a unique table entry for every possible permutation of protocol version, flags, byte0/mask0, etc. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - document the alps.h data structuresKevin Cernekee
Add kernel-doc markup. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Merge remote-tracking branch 'regmap/topic/no-bus' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/mmio' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/flat' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/debugfs' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/async' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/24bit' into regmap-nextMark Brown
2013-02-14regmap: mmio: add register clock supportPhilipp Zabel
Some mmio devices have a dedicated interface clock that needs to be enabled to access their registers. This patch optionally enables a clock before accessing registers in the regmap_bus callbacks. I added (devm_)regmap_init_mmio_clk variants of the init functions that have an added clk_id string parameter. This is passed to clk_get to request the clock from the clk framework. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-14Merge branch 'usbhost17-for-arm-soc' of git://github.com/rogerq/linux into ↵Tony Lindgren
omap-for-v3.9/usb
2013-02-14regulator: Fix memory garbage dev_err printout.Russ Dill
commit dd8004af: 'regulator: core: Log when a device causes a voltage constraint fail', tried to print out some information about the check consumer min/max uV fixup, however, it uses a garbage pointer left over from list_for_each_entry leading to boot messages in the form: '[ 2.079890] <RANDOM ASCII>: Restricting voltage, 3735899821-4294967295uV' Because it references regulator->dev, it could potentially read memory from anywhere causing a panic. This patch instead uses rdev and the updated min/max uV values. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-14Merge tag 'v3.8-rc7' into regulator-coreMark Brown
Linux 3.8-rc7
2013-02-14tpm/ibmvtpm: build only when IBM pseries is configuredKent Yoder
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-14s390/module: Add missing R_390_NONE relocation typeHendrik Brueckner
Allow loading of kernel modules that have relocations of type R_390_NONE. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14drivers/gpio: add missing GENERIC_HARDIRQ dependencyHeiko Carstens
The VIA VX855/VX875 GPIO and RDC R-321x GPIO support drivers select MFD_CORE which itself depends on GENERIC_HARDIRQ support. So add this dependency to these two drivers as well to prevent selection of MFD_CORE. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14drivers/input: add couple of missing GENERIC_HARDIRQS dependenciesHeiko Carstens
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cleanup: rename SPP to LPPHendrik Brueckner
The set-program-parameter (SPP) instruction has been renamed to load-program-parameter (LPP) (see SA23-2260). Reflect this change and rename all macro/instruction references. Also remove the duplicate SPP/LPP entry in the kernel disassembler instruction list. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/mm: implement software dirty bitsMartin Schwidefsky
The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/mm: Fix crst upgrade of mmap with MAP_FIXEDHendrik Brueckner
Right now the page table upgrade does not happen if the end address of a fixed mapping is greater than TASK_SIZE. Enhance s390_mmap_check() to handle MAP_FIXED mappings correctly. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/linker skript: discard exit.data at runtimeHeiko Carstens
Discard exit.data section at run time, not link time, since exit.text references exit.data and causes this build error: `.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14drivers/media: add missing GENERIC_HARDIRQS dependencyHeiko Carstens
Texas Instruments WL1273 I2C FM Radio (RADIO_WL1273) selects MFD_CORE, which itself depends on GENERIC_HARDIRQS. So add the dependency to the TI driver as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/bpf,jit: add vlan tag supportHeiko Carstens
s390 version of 855ddb56 "x86: bpf_jit_comp: add vlan tag support". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependencyHeiko Carstens
The AT91RM9200 driver call devm_request_irq() and therefore should depend on GENERIC_HARDIRQS to prevent link/compile errors on plaforms without GENERIC_HARDIRQS. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14iucv: fix kernel panic at rebootHendrik Brueckner
The iucv base layer is initialized during the registration of the first iucv handler. If no handler is registered and the iucv_reboot_event() notifier is called, a missing check can cause a kernel panic in iucv_block_cpu(). To solve this issue, check the IRQ masks invoke iucv_block_cpu() for enabled CPUs only. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/Kconfig: sort list of arch selected config optionsHeiko Carstens
Just like on other architectures. The intention is that this will reduce merge conflicts if new config options get added in sorted order as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14phylib: remove !S390 dependeny from KconfigHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14uio: remove !S390 dependency from KconfigHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14dasd: fix sysfs cleanup in dasd_generic_removeStefan Weinhuber
When the DASD devices are detached from the driver, then the dasd_generic_remove function is called. One of the things this function should do is to remove the DASD specific sysfs attributes, but this is not done in all cases. This is likely to cause an oops when at a later point sysfs stumbles over the stale pointers. In particular this happens when when the modules are unloaded and loaded again. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/pci: fix hotplug module initSebastian Ott
Loading the pci hotplug module when no devices are present will fail but unfortunately some hotplug callbacks stay registered to the pci bus level. Fix this by not letting module loading fail when no pci devices are present and provide proper {de}registration functions for these callbacks. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/pci: cleanup clp page allocationSebastian Ott
Use the __get_free_pages wrapper in clp_alloc_block. Also change the allocation to use one page only. This page is used as CLP response block e.g. to list available pci functions. Using one page we can list > 250 pci functions at once and we have code to loop around this CLP command (if not all functions fit into to the CLP block) already in place. Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/pci: cleanup clp inline assemblySebastian Ott
Tell gcc that the memory region pointed to by req will be used (and changed). Also remove the (now) superfluous memory constraint. Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/perf: cpum_cf: fallback to software sampling eventsHendrik Brueckner
The CPU-measurement counter facility does not support sampling events and returns -EINVAL in that case. This return code lets the perf tool fail. To fall back to software sampling events, return -ENOENT instead. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/mm: provide PAGE_SHARED defineHeiko Carstens
Only needed to make some drivers compile... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14parport: disable PC-style parallel port support for s390Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14ata: disable ATA for s390Heiko Carstens
Add s390 to the list of architectures that don' want ATA. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/pci: rename pci_probe to s390_pci_probeHeiko Carstens
pci_probe is too generic and has a name clash with other common code parts. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/dma: remove dma_is_consistent() declarationHeiko Carstens
There is no such function nor any caller in the whole kernel. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/dma: provide dma_cache_sync() functionHeiko Carstens
Provide empty dma_cache_sync() function. Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/barrier: convert mb() to define againHeiko Carstens
Some of the now available common code drivers only compile if mb() is a define. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/time: rename tod clock access functionsHeiko Carstens
Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/scm: use inline dummy functionsSebastian Ott
Convert the defines for the !CONFIG_SCM* stuff to static inline functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: handle unknown pgroup stateSebastian Ott
When an attempt to query or modify the grouping state of a channel path fails due to a timeout, we cannot be sure about its state. To get back to a defined state, disband the whole path group and try again while excluding the offending path. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: export vpm via sysfsSebastian Ott
Add new attribute "vpm" to the subchannel sysfs directory of I/O subchannels. This attribute contains a path mask indicating which channel paths were successfully verified to be usable for I/O. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: skip broken pathsSebastian Ott
Omit known to be broken paths (those set in path_noirq_mask) for the sense/set PGID and nop IO commands. Note: path_noirq_mask will be reset in ccw_device_verify_start (the paths could be healthy again). However if we restart a path verification via verify_start this mask will not be reset (there is no need to let the wait for an interrupt time out again - plus we do not want to loop once we deal with the paths in unknown path group state). Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-16 00:56:08 +0000