summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-19MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu moveRoland Dreier
Commit 166e9278a3f9 ("x86/ia64: intel-iommu: move to drivers/iommu/") moved the VT-d driver to drivers/iommu, but left the "F:" line in MAINTAINERS pointing to drivers/pci, which breaks scripts/get_maintainer.pl. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-10-19drm/radeon/kms/atom: fix handling of FB scratch indicesAlex Deucher
FB scratch indices are dword indices, but we were treating them as byte indices. As such, we were getting the wrong FB scratch data for non-0 indices. Fix the indices and guard the indexing against indices larger than the scratch allocation. Fixes memory corruption on some boards if data was written past the end of the FB scratch array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dave Airlie <airlied@redhat.com> Tested-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-19pptp: pptp_rcv_core() misses pskb_may_pull() callEric Dumazet
e1000e uses paged frags, so any layer incorrectly pulling bytes from skb can trigger a BUG in skb_pull() [951.142737] [<ffffffff813d2f36>] skb_pull+0x15/0x17 [951.142737] [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp] [951.152725] [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105 [951.163558] [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp] [951.165092] [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre] [951.165092] [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1 [951.177599] [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1 [951.177599] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.177599] [<ffffffff81410996>] ip_local_deliver+0x51/0x55 [951.177599] [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e [951.177599] [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e [951.204898] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.214651] [<ffffffff81410bb5>] ip_rcv+0x21b/0x246 pptp_rcv_core() is a nice example of a function assuming everything it needs is available in skb head. Reported-by: Bradley Peterson <despite@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Updating driver versionYevgeny Petrilin
Driver version updated to 1.5.4.2 Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Adding rxhash supportYevgeny Petrilin
Moving to Toeplitz function in RSS calculation. Reporting rxhash in skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Recording rx queue for gro packetsYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Checksum counters per ringYevgeny Petrilin
Not updating common counters from data path. The checksum counters are per ring, summarizing them when collecting statistics. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Controlling FCS header removalYevgeny Petrilin
Canceling FCS removal where FW allows for better alignment of incoming data. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4: Fix vlan table overflowYevgeny Petrilin
Prevent overflow when trying to register more Vlans then the Vlan table in HW is configured to. Need to take into acount that the first 2 entries are reserved. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added recovery check of CA wake status.Daniel Martensson
Added recovery check of CA wake status in case of wake up timeout. Added check of CA wake status in case of wake down timeout. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added sanity check for length of CAIF framesDaniel Martensson
Added sanity check for length of CAIF frames, and tear down of CAIF link-layer device upon protocol error. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Make inactivity timeout configurable.Dmitry Tarnyagin
CAIF HSI uses a timer for inactivity. Upon timeout HSI-wake signaling is initiated to allow power-down of the HSI block. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: HSI-Platform device register and unregisters itselfDaniel Martensson
Platform device is no longer removed from caif_hsi at shutdown. The HSI-platform device must do it's own registration and unregistration. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Making read and writes asynchronous.Daniel Martensson
Some platforms do not allow to put HSI block into low-power mode when FIFO is not empty. The patch flushes (by reading) FIFO at wake down sequence. Asynchronous read and write is implemented for that. As a side effect this will also greatly improve performance. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Fix for wakeup condition problemDmitry Tarnyagin
Under stressed conditions a race could happen when del_timer_sync() was called from softirq context at the same time when mod_timer_pending() for the same timer was called from the workqueue. This leaded to a state mismatch in the CAIF HSI driver and following unexpected link wakeup procedure. The fix puts del_timer_sync() and mod_timer_pending() calls under a spin lock to protect against the race condition. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Fixing a race condition in the caif_hsi codeDmitry Tarnyagin
cfhsi->tx_state was not protected by a spin lock. TX soft-irq could interrupt cfhsi_tx_done_work work leading to inconsistent state of the driver. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: HSI Fix uninitialized data in HSI headersjur.brandeland@stericsson.com
CAIF HSI header may be uninitialized and cause last message to be repeated if transmit size is ~86 bytes long. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19tproxy: copy transparent flag when creating a time waitKOVACS Krisztian
The transparent socket option setting was not copied to the time wait socket when an inet socket was being replaced by a time wait socket. This broke the --transparent option of the socket match and may have caused that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state were being dropped by the packet filter. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19pptp: fix skb leak in pptp_xmit()Eric Dumazet
In case we cant transmit skb, we must free it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19bonding: use local function pointer of bond->recv_probe in bond_handle_frameMitsuo Hayasaka
The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19smsc911x: Add support for SMSC LAN89218Phil Edworthy
LAN89218 is register compatible with LAN911x. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18tg3: negate USE_PHYLIB flag checkJiri Pirko
USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This results tg3_phy_fini->phy_disconnect is never called and when tg3 module is removed. In my case this resulted in panics in phy_state_machine calling function phydev->adjust_link. So correct this check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18netconsole: enable netconsole can make net_device refcnt incorrentGao feng
There is no check if netconsole is enabled current. so when exec echo 1 > enabled; the reference of net_device will increment always. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18xfrm6: Don't call icmpv6_send on local errorSteffen Klassert
Calling icmpv6_send() on a local message size error leads to an incorrect update of the path mtu. So use xfrm6_local_rxpmtu() to notify about the pmtu if the IPV6_DONTFRAG socket option is set on an udp or raw socket, according RFC 3542 and use ipv6_local_error() otherwise. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18ipv6: Fix IPsec slowpath fragmentation problemSteffen Klassert
ip6_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path). On IPsec the effective mtu is lower because we need to add the protocol headers and trailers later when we do the IPsec transformations. So after the IPsec transformations the packet might be too big, which leads to a slowpath fragmentation then. This patch fixes this by building the packets based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr handling to this. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18ipv6: Remove superfluous NULL pointer check in ipv6_local_rxpmtuSteffen Klassert
The pointer to mtu_info is taken from the common buffer of the skb, thus it can't be a NULL pointer. This patch removes this check on mtu_info. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18xfrm: Simplify the replay check and advance functionsSteffen Klassert
The replay check and replay advance functions had some code duplications. This patch removes the duplications. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18net/phy: extra delay only for RGMII interfaces for IC+ IP 1001Giuseppe CAVALLARO
The extra delay of 2ns to adjust RX clock phase is actually needed in RGMII mode. Tested on the HDK7108 (STx7108c2). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18net: allow vlan traffic to be received under bondJohn Fastabend
The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18cs89x0: Move the driver into the Cirrus dirJeff Kirsher
The cs89x0 driver was initial placed in the apple/ when it should have been placed in the cirrus/. This resolves the issue by moving the dirver and fixing up the respective Kconfig(s) and Makefile(s). Thanks to Sascha for reporting the issue. -v2 Fix a config error that was introduced with v1 by removing the dependency on MACE for NET_VENDOR_APPLE. CC: Russell Nelson <nelson@crynwr.com> CC: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18l2tp: give proper headroom in pppol2tp_xmit()Eric Dumazet
pppol2tp_xmit() calls skb_cow_head(skb, 2) before calling l2tp_xmit_skb() Then l2tp_xmit_skb() calls again skb_cow_head(skb, large_headroom) This patchs changes the first skb_cow_head() call to supply the needed headroom to make sure at most one (expensive) pskb_expand_head() is done. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18l2tp: fix a potential skb leak in l2tp_xmit_skb()Eric Dumazet
l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18bridge: fix hang on removal of bridge via netlinkstephen hemminger
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18macvlan: handle fragmented multicast framesEric Dumazet
Fragmented multicast frames are delivered to a single macvlan port, because ip defrag logic considers other samples are redundant. Implement a defrag step before trying to send the multicast frame. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18NFSv4: Translate NFS4ERR_BADNAME into ENOENT when applied to a lookupTrond Myklebust
Both LOOKUP and OPEN operations may return NFS4ERR_BADNAME if we send a an invalid name as a filename argument. As far as the application is concerned, it just has to know that the file doesn't exist, and so ENOENT would be the appropriate reply. We should only return EINVAL if the filename is being used to _create_ a new object on the remote filesystem. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()Trond Myklebust
...and also remove the associated nfs_v4_clientops entry. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-18mm: memory hotplug: Check if pages are correctly reserved on a per-section basisMel Gorman
(Resending as I am not seeing it in -next so maybe it got lost) mm: memory hotplug: Check if pages are correctly reserved on a per-section basis It is expected that memory being brought online is PageReserved similar to what happens when the page allocator is being brought up. Memory is onlined in "memory blocks" which consist of one or more sections. Unfortunately, the code that verifies PageReserved is currently assuming that the memmap backing all these pages is virtually contiguous which is only the case when CONFIG_SPARSEMEM_VMEMMAP is set. As a result, memory hot-add is failing on those configurations with the message; kernel: section number XXX page number 256 not reserved, was it already online? This patch updates the PageReserved check to lookup struct page once per section to guarantee the correct struct page is being checked. [Check pages within sections properly: rientjes@google.com] [original patch by: nfont@linux.vnet.ibm.com] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18Revert "memory hotplug: Correct page reservation checking"Greg Kroah-Hartman
This reverts commit 54f23eb7ba7619de85d8edca6e5336bc33072dbd. Turns out this patch is wrong, another correct one will follow it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18Update email address for stable patch submissionJosh Boyer
The stable@kernel.org email address has been replaced with the stable@vger.kernel.org mailing list. Change the stable kernel rules to reference the new list instead of the semi-defunct email alias. CC: <stable@kernel.org> CC: <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: gadget: midi: memory leak in f_midi_bind_config()Dan Carpenter
There is a small memory leak on the error paths. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: gadget: midi: fix range check in f_midi_out_open()Dan Carpenter
! has higher precedence than >= and since neither 0 nor 1 are greater than 8 the condition is always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18QE/FHCI: fixed the CONTROL bugJerry Huang
For USB CONTROL transaction, when the data length is zero, the IN package is needed to finish this transaction in status stage. Signed-off-by: Jerry Huang <r66093@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18usb: renesas_usbhs: tidyup for smatch warningsKuninori Morimoto
This patch tidyup below smatch complaint drivers/usb/renesas_usbhs/mod_host.c +447 usbhsh_endpoint_free() warn: variable dereferenced before check 'uep' (see line 444) Special thanks to Dan Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platformsXu lei
For FSL PPC SoCs USB_ARCH_HAS_EHCI currently on depends on PPC_83xx. However that excludes support for USB on 85xx & QorIQ devices. Use FSL_SOC insted which will get us 83xx, 85xx, QorIQ, and 5xxx which all have the same USB IP on them. Signed-off-by: Xulei <B33228@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18EHCI: workaround for MosChip controller bugAlan Stern
This patch (as1489) works around a hardware bug in MosChip EHCI controllers. Evidently when one of these controllers increments the frame-index register, it changes the three low-order bits (the microframe counter) before changing the higher order bits (the frame counter). If the register is read at just the wrong time, the value obtained is too low by 8. When the appropriate quirk flag is set, we work around this problem by reading the frame-index register a second time if the first value's three low-order bits are all 0. This gives the hardware a chance to finish updating the register, yielding the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jason N Pitt <jpitt@fhcrc.org> CC: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18usb: gadget: file_storage: fix race on unloadingYauheni Kaliuta
There is a race, reproduced rarely if you unload the module when host finishes mass storage device initialization (reading partition table and so on): fsg_unbind() code first closes lun files then waits for worker thread to finish its work, as the result the thread may operate on already closed device with an oops and backtrace: [ 484.937225] [<b00e403c>] (touch_atime+0x4/0x140) from [<b00a1498>] (generic_file_aio_read+0x678/0x6f0) [ 484.946563] [<b00a1498>] (generic_file_aio_read+0x678/0x6f0) from [<b00d08c4>] (do_sync_read+0xb0/0xf4) [ 484.955963] [<b00d08c4>] (do_sync_read+0xb0/0xf4) from [<b00d1478>] (vfs_read+0xac/0x144) [ 484.964172] [<b00d1478>] (vfs_read+0xac/0x144) from [<af24c6a8>] (fsg_setup+0x7f4/0x900 [g_file_storage]) [ 484.973785] [<af24c6a8>] (fsg_setup+0x7f4/0x900 [g_file_storage]) from [<af24da14>] (fsg_main_thread+0x85c/0x175c [g_file_storage]) [ 484.985626] [<af24da14>] (fsg_main_thread+0x85c/0x175c [g_file_storage]) from [<b0077c48>] (kthread+0x7c/0x84) [ 484.995666] [<b0077c48>] (kthread+0x7c/0x84) from [<b002f950>] (kernel_thread_exit+0x0/0x8) [ 485.004028] Code: eaffffd0 e28dd008 e8bd8df0 e92d40f7 (e591400c) Change the order in unbind: wait for the thread first, then close the files. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other ↵Uwe Bonnes
drivers Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structureUwe Bonnes
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 10:16:32 +0000