summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-25net_ns: add __rcu annotationsEric Dumazet
add __rcu annotation to (struct net)->gen, and use rcu_dereference_protected() in net_assign_generic() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25rps: add __rcu annotationsEric Dumazet
Add __rcu annotations to : (struct netdev_rx_queue)->rps_map (struct netdev_rx_queue)->rps_flow_table struct rps_sock_flow_table *rps_sock_flow_table; And use appropriate rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25[SCSI] bfa: remove os wrapper functions and macrosJing Huang
This patch replaces register access functions and macros with the the ones provided by linux. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] bfa: replace endian swap macros with the ones provided by linuxJing Huang
Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] bfa: remove os wrapper and unused functionsJing Huang
This patch removes os wrapper and unused functions. bfa_os_assign(), bfa_os_memset(), bfa_os_memcpy(), bfa_os_udelay() bfa_os_vsprintf(), bfa_os_snprintf(), and bfa_os_get_clock() are replaced with direct assignment or native linux functions. Some unused functions related to VF (Vitual fabric) are also removed. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] scsi_dh_rdac: Add two new SUN devices to rdac_dev_listChauhan, Vijay
Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25hwmon: lis3: Short explanations of platform data fieldsSamu Onkalo
Short documentation at kernel doc format. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Enhance lis3 selftest with IRQ line testSamu Onkalo
Configure chip to data ready mode in selftest and count received interrupts to see that interrupt line(s) are working. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: use block read to access data registersSamu Onkalo
Add optional blockread function to interface driver. If available the chip driver uses it for data register access. For 12 bit device it reads 6 bytes to get 3*16bit data. For 8 bit device it reads out 5 bytes since every second byte is dummy. This optimizes bus usage and reduces number of operations and interrupts needed for one data update. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Adjust fuzziness for 8 bit deviceSamu Onkalo
Default fuziness is set smaller for 8 device. In 12 bit device LSB is quite close to 1 mg (mg = 1 / 1000 of earth gravity). In 8bit device LSB is about 18 mg. Set fuziness to 1 for 8 bit device. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: New parameters to platform dataSamu Onkalo
Added default output data rate setting to platform data. If default rate is 0, reset default value is used. Added control for duration via platform data. Added possibility to configure interrupts to trig on both rising and falling edge. The lis3 WU unit can be configured quite many ways and with some configurations it is quite handy to get coordinate refresh when some event trigs and when it reason goes away. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: restore axis enabled bitsSamu Onkalo
All axis enable bits are set to 0 at module remove. Restore reset default value at init. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Power on correctionsSamu Onkalo
Sometimes lis3 chip seems to fail to setup factory tuning at boot up. This probably happens if there is some odd power ramp down ramp up sequence for example in device restart. Set boot bit in control2 register to trig boot sequence manually and wait until it is finished. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Update coordinates at polled device openSamu Onkalo
Call input device poll function at device open to refresh coordinates immediately. This is needed for the case where poll interval is set to zero and coordinate updates happens purely under interrupt control. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Cleanup interrupt handlingSamu Onkalo
Irqcfg moved to chip data instead of platform data. This simplifies access in interrupt handler little bit. Input device open and close functions set status for interrupt threaded handler once. Unnecessary check for interrupt source removed since it is enough that active interrupt line indicates that there was an interrupt. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: regulator controlSamu Onkalo
Based on pm_runtime control, turn lis3 regulators on and off. Perform context save and restore on transitions. Feature is optional and must be enabled in platform data. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: pm_runtime supportSamu Onkalo
Add pm_runtime support to lis3 core driver. Add pm_runtime support to lis3 i2c driver. spi and hp_accel drivers are not yet supported. Old always on functionality remains for those. For sysfs there is 5 second delay before turning off the chip to avoid long ramp up delay. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25Kirkwood: add fan support for Network Space Max v2Simon Guinot
Signed-off-by: Simon Guinot <sguinot@lacie.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: add generic GPIO fan driverSimon Guinot
This patch adds hwmon support for fans connected to GPIO lines. Platform specific information such as GPIO pinout and speed conversion array (rpm from/to GPIO value) are passed to the driver via platform_data. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (coretemp) fix reading of microcode revision (v2)Jan Beulich
According to the documentation, simply reading the respective MSR isn't sufficient: It should be written with zeros, cpuid(1) be executed, and then read (see arch/x86/kernel/cpu/intel.c for an example). v2: Fail probe when microcode revision cannot be determined, but is needed to check for proper operation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefsChen Gong
CONFIG_HOTPLUG_CPU is used too much in some drivers. This patch clean them up. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (pkgtemp) align driver initialization style with coretempChen Gong
pkgtemp is derived from coretemp, so some reasonable logics should be applied onto pkgtemp, too. Such as the init logic here. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: LTC4261 Hardware monitoring driverGuenter Roeck
This driver adds support for Linear Technology LTC4261 I2C Negative Voltage Hot Swap Controller. Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) add axes module parameter for custom axis-mappingTakashi Iwai
The axis-mapping of lis3dev device on many (rather most) HP machines doesn't follow the standard. When each new model appears, users need to adjust again. Testing this requires the rebuild of kernel, thus it's not trivial for end-users. This patch adds a module parameter "axes" to allow a custom axis-mapping without patching and recompiling the kernel driver. User can pass the parameter such as axes=3,2,1. Also it can be changed via sysfs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (hp_accel) Add HP Mini 510x family supportMasanari Iida
This patch is an enhanced version of Takashi Iwai's [PATCH] hp_accel: Add quirks for HP ProBook 532x and HP Mini 5102 My HP Mini 5101 works fine with this patch. Confirmed with Tux Racer. Signed-off by: Masanari Iida <standby24x7@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) Add support for new LIS3DC / HP3DC chipTakashi Iwai
A new version of LIS3 chip has slight incompatibilities from former versions. This patch adds the minimal support for it. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: remove inclusion of unnecessary headers from {core, pkg, ↵Jan Beulich
via-cpu}temp.c These likely originate from these drivers being clones of one another and/or other drivers which actually needed these includes. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: (coretemp) cosmetic cleanupJan Beulich
"break" after "return" is at best bogus (good compilers even warn about the "break" being unreachable). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: {core, pkg, via}cpu_temp_device_remove() can all be __cpuinitJan Beulich
... as they're being called only from a __cpuinit function. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25[SCSI] cxgb4i: ignore informational act-open-rpl messageKaren Xie
Ignore active open reply with status negative advice. This is an informational message. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Correct PRLI failure response code handling.Andrew Vasquez
This patch fixes an issue which causes the firmware to fail with a 'PRLI failed' status code (iop1 = 405). This status triggers the driver to fall into an incorrect code-path which does not attempt a login retry. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Drop srb reference before waiting for completion.Mike Christie
This patch fixes a regression introduced by commit 083a469db4ecf3b286a96b5b722c37fc1affe0be qla2xxx_eh_wait_on_command() is waiting for an srb to complete, which will never happen as the routine took a reference to the srb previously and will only drop it after this function. So every command abort will fail. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Addition of shutdown callback handler.Madhuranath Iyengar
This patch adds a shutdown handler to qla2xxx driver to make sure that all DMA and firmware activities are stopped, and any associated driver resources are released. The need for this handler arose when executing kexec in specific environments caused the data of the 2nd kernel to be corrupted, due to DMA activities. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Initialize the vport_slock spinlock.Andrew Vasquez
Commit feafb7b1714cf599a6d0fed45801ab3f66046cbd neglected to initialize the spinlock. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Remove scsi_cmnd->serial_number from debug tracesMadhuranath Iyengar
This patch cleans up any printk or debug tracing of the the serial_number field in the qla2xxx driver. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Add flash read/update support using BSG interfaceHarish Zunjarrao
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Group CS_RESET return status with other link level event ↵Chad Dupuis
statuses. Currently when we receive a CS_RESET as a response for a SCSI command the driver will return DID_TRANSPORT_DISRUPTED back to the SCSI mid-layer. There are certain circumstances where this could cause the mid-layer to exhaust all of its retries if the FC port goes away for a short time. This will result in commands being prematurly failed. Moving the CS_RESET return code to be grouped with other link level events will cause the FC transport layer to block that target's queue thus preventing the premature exhaustion of retries. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Change del_timer_sync() to del_timer() in qla2x00_ctx_sp_free().Chad Dupuis
Using del_timer_sync() in the qla2x00_ctx_sp_free() function may cause a kernel panic as it is not interrupt context safe and qla2x00_ctx_sp_free() may be called from a softirq context. Changing the call from del_timer_sync() to del_timer() will make the function interrupt context safe. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25netfilter: fix module dependency issues with IPv6 defragmentation, ip6tables ↵KOVACS Krisztian
and xt_TPROXY One of the previous tproxy related patches split IPv6 defragmentation and connection tracking, but did not correctly add Kconfig stanzas to handle the new dependencies correctly. This patch fixes that by making the config options mirror the setup we have for IPv4: a distinct config option for defragmentation that is automatically selected by both connection tracking and xt_TPROXY/xt_socket. The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket and xt_TPROXY: we only compile these in case we have ip6tables support enabled. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25[SCSI] qla2xxx: Add module parameter to enable/disable GFF_ID device type check.Chad Dupuis
Add the module parameter ql2xgffidenable to disable/enable the use of the GFF_ID name server command to prevent non FCP SCSI devices from being added to the driver's internal fc_port database. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: Remove port down retry count.Chad Dupuis
This patch removes the use of the port down retry counter as a mechanism to update a fcport state. The internal driver counter is a residual carry-over from pre-FC-transport aware driver inteaction. The ql2xport_down_retry module parameter and NVRAM set ha->port_down_retry_count remain in order to seed the fc-host's default dev-loss-tmo. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla2xxx: locking problem in qla2x00_init_rings()Dan Carpenter
IRQs are already disabled here so we don't need to disable them again. But more importantly, the spin_lock_irqsave() overwrites "flags" and that breaks things when we want to re-enable the IRQs when we call spin_unlock_irqrestore(&ha->hardware_lock, flags); Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[media] IR: initialize ir_raw_event in few more driversMaxim Levitsky
Few drivers still have assumption that ir_raw_event consists of duration and pulse flag. Fix that. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-25[media] Guard a divide in v4l1 compat layerDr. David Alan Gilbert
Hi, I managed to trigger a divide by 0 in the v4l compat code with the mem2mem test module; I suspect perhaps it shouldn't have been returning a 0 pixel wide picture, but either way it seems right to guard this divide by 0 in the compatibility layer. Tested on 2.6.36 (ubuntu build, but the code in this is the same as upstream), but ***not tested with a real video device***. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> cc: stable.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-25Merge branch 'nfs-for-2.6.37' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits) SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred nfs: fix unchecked value Ask for time_delta during fsinfo probe Revalidate caches on lock SUNRPC: After calling xprt_release(), we must restart from call_reserve NFSv4: Fix up the 'dircount' hint in encode_readdir NFSv4: Clean up nfs4_decode_dirent NFSv4: nfs4_decode_dirent must clear entry->fattr->valid NFSv4: Fix a regression in decode_getfattr NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer NFS: Ensure we check all allocation return values in new readdir code NFS: Readdir plus in v4 NFS: introduce generic decode_getattr function NFS: check xdr_decode for errors NFS: nfs_readdir_filler catch all errors NFS: readdir with vmapped pages NFS: remove page size checking code NFS: decode_dirent should use an xdr_stream SUNRPC: Add a helper function xdr_inline_peek NFS: remove readdir plus limit ...
2010-10-25perf python scripting: Improve the syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall names . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia tmp]# perf trace syscall-counts-by-pid Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- automount [1670] futex 2 sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 perf [15178] read 2506 open 794 close 769 write 240 getdents 112 lseek 16 stat 9 perf_counter_open 5 fcntl 5 mmap 5 statfs 2 perf [15179] read 56701 open 499 stat 176 fstat 149 close 109 mmap 98 brk 75 rt_sigaction 66 munmap 42 mprotect 24 lstat 7 lseek 5 getdents 4 ioctl 3 readlink 2 futex 1 statfs 1 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 write 1 [root@emilia tmp]# fg -bash: fg: current: no such job [root@emilia tmp]# perf trace syscall-counts-by-pid 2322 Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# perf trace syscall-counts-by-pid sshd Press control+C to stop and show the summary ^C syscall events for sshd: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: print the syscall name on sctopArnaldo Carvalho de Melo
[root@emilia tmp]# perf trace sctop 1 syscall events: event count ---------------------------------------- ---------- read 215400 futex 4029 write 376 brk 33 rt_sigprocmask 24 select 17 lseek 2 fsync 1 ^C[root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the syscalls-counts scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name Now it looks like this: [root@emilia ~]# perf trace syscall-counts Press control+C to stop and show the summary ^C syscall events: event count ---------------------------------------- ----------- read 102752 open 1293 close 878 write 319 stat 185 fstat 149 getdents 116 mmap 98 brk 80 rt_sigaction 66 munmap 42 mprotect 24 lseek 21 lstat 7 rt_sigprocmask 4 futex 3 statfs 3 ioctl 3 readlink 2 select 2 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
generated by cgit (git 2.34.1) at 2025-09-20 19:01:20 +0000