summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-05HID: nintendo: reinitialize USB Pro Controller after resuming from suspendMartino Fontana
When suspending the computer, a Switch Pro Controller connected via USB will lose its internal status. However, because the USB connection was technically never lost, when resuming the computer, the driver will attempt to communicate with the controller as if nothing happened (and fail). Because of this, the user was forced to manually disconnect the controller (or to press the sync button on the controller to power it off), so that it can be re-initialized. With this patch, the controller will be automatically re-initialized after resuming from suspend. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <tinozzo123@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix some missing function calls() in the probe error ↵Christophe JAILLET
handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing calls. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe ↵Christophe JAILLET
error handling path The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing call. Make sure it is safe to call in the probe error handling path by preventing the led_classdev from attempting to set the LED brightness to the off state on unregister. Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: multitouch: Add required quirk for Synaptics 0xcd7e deviceRahul Rameshbabu
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <rain@sunshowers.io> Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/ Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05binder: fix memory leaks of spam and pending workCarlos Llamas
A transaction complete work is allocated and queued for each transaction. Under certain conditions the work->type might be marked as BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when the target is currently frozen. However, these work types are not being handled in binder_release_work() so they will leak during a cleanup. This was reported by syzkaller with the following kmemleak dump: BUG: memory leak unreferenced object 0xffff88810e2d6de0 (size 32): comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s) hex dump (first 32 bytes): e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-..... 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114 [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline] [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline] [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152 [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010 [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline] [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352 [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline] [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline] [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857 [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the leaks by kfreeing these work types in binder_release_work() and handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup. Cc: stable@vger.kernel.org Fixes: 0567461a7a6e ("binder: return pending info for frozen async txns") Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming") Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05Merge branch 'net-mana-fix-some-tx-processing-bugs'Paolo Abeni
Haiyang Zhang says: ==================== net: mana: Fix some TX processing bugs Fix TX processing bugs on error handling, tso_bytes calculation, and sge0 size. ==================== Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05media: mediatek: vcodec: Fix encoder access NULL pointerIrui Wang
Need to set the private data with encoder device, or will access NULL pointer in encoder handler. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-05firmware_loader: Update contact emails for ABI docsRuss Weight
Update the firmware_loader documentation and corresponding section in the MAINTAINERs file with a new email address. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05Documentation: embargoed-hardware-issues.rst: Clarify prenotifactionKees Cook
There has been a repeated misunderstanding about what the hardware embargo list is for. Clarify the language in the process so that it is clear that only fixes are coordinated. There is explicitly no prenotification process. The list members are also expected to keep total radio silence during embargoes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: workflows@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finishedGil Fine
When handling DisplayPort bandwidth request tb_switch_find_by_route() is called and it returns a router structure with reference count increased. In order to avoid resource leak call tb_switch_put() when finished. Fixes: 6ce3563520be ("thunderbolt: Add support for DisplayPort bandwidth allocation mode") Cc: stable@vger.kernel.org Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-10-05dma-buf: add dma_fence_timestamp helperChristian König
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
2023-10-05can: peak_pci: replace deprecated strncpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required since card is already zero-initialized: | card = kzalloc(sizeof(*card), GFP_KERNEL); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20231005-strncpy-drivers-net-can-sja1000-peak_pci-c-v1-1-c36e1702cd56@google.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-10-05mcb: remove is_added flag from mcb_device structJorge Sanjuan Garcia
When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-05wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()Dmitry Antipov
Since '!(0x5ea42b & 0xffff0000)' is always false, remove unreachable block in 'rtl92d_dm_check_edca_turbo()' and convert EDCA limits to constant variables. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003043318.11370-1-dmantipov@yandex.ru
2023-10-05wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chipsZong-Zhe Yang
We add TX power table format for Wi-Fi 7 chips. Since Wi-Fi 7 tables are larger, in order to reuse some chunks, we extend code to process nested entries. Now, dbgfs txpwr_table can work with Wi-Fi 7 chips. An output example of dbgfs txpwr_table on Wi-Fi 7 chips is shown below. ... [TX power byrate] << BW20 >> CCK - 1M 2M 5.5M 11M | 20, 20, 20, 20, dBm LEGACY - 6M 9M 12M 18M | 18, 18, 18, 18, dBm LEGACY - 24M 36M 48M 54M | 18, 18, 17, 16, dBm EHT - MCS14 MCS15 | 0, 0, dBm DLRU_EHT - MCS14 MCS15 | 0, 18, dBm MCS_1SS - MCS0 MCS1 MCS2 MCS3 | 18, 18, 18, 18, dBm MCS_1SS - MCS4 MCS5 MCS6 MCS7 | 18, 17, 16, 15, dBm MCS_1SS - MCS8 MCS9 MCS10 MCS11 | 14, 13, 12, 11, dBm MCS_1SS - MCS12 MCS13 | 10, 9, dBm HEDCM_1SS - MCS0 MCS1 MCS3 MCS4 | 18, 18, 18, 18, dBm DLRU_MCS_1SS - MCS0 MCS1 MCS2 MCS3 | 18, 18, 18, 18, dBm DLRU_MCS_1SS - MCS4 MCS5 MCS6 MCS7 | 18, 17, 16, 15, dBm DLRU_MCS_1SS - MCS8 MCS9 MCS10 MCS11 | 14, 13, 12, 11, dBm DLRU_MCS_1SS - MCS12 MCS13 | 10, 9, dBm DLRU_HEDCM_1SS - MCS0 MCS1 MCS3 MCS4 | 18, 18, 18, 18, dBm MCS_2SS - MCS0 MCS1 MCS2 MCS3 | 18, 18, 18, 18, dBm ... [TX power limit] << 1TX >> CCK_20M - NON_BF BF | 0, 0, dBm CCK_40M - NON_BF BF | 0, 0, dBm OFDM - NON_BF BF | 18, 0, dBm MCS_20M_0 - NON_BF BF | 18, 0, dBm MCS_20M_1 - NON_BF BF | 0, 0, dBm ... Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-8-pkshih@realtek.com
2023-10-05wifi: rtw89: debug: show txpwr table according to chip genZong-Zhe Yang
Since current TX power stuffs are for ax chips, add a suffix `_ax` to them. Then, when requested to show txpwr table, select table according to chip generation first. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-7-pkshih@realtek.com
2023-10-05wifi: rtw89: phy: set TX power RU limit according to chip genZong-Zhe Yang
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for TX power RU limit. We rename original setting stuffs with a suffix `_ax`, concentrate related enum declaration in phy.h, and implement setting flow for Wi-Fi 7 chips. Then, we set TX power RU limit according to chip generation. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-6-pkshih@realtek.com
2023-10-05wifi: rtw89: phy: set TX power limit according to chip genZong-Zhe Yang
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for TX power limit. We rename original setting stuffs with a suffix `_ax`, concentrate related enum declaration in phy.h, and implement setting flow for Wi-Fi 7 chips. Then, we set TX power limit according to chip generation. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-5-pkshih@realtek.com
2023-10-05wifi: rtw89: phy: set TX power offset according to chip genZong-Zhe Yang
We have a register to control TX power of each rate section to increase or decrease an offset. But, Wi-Fi 6 chips and Wi-Fi 7 chips have different address and format for this control register. We rename original setting stuffs with a suffix `_ax` and implement setting flow for Wi-Fi 7 chips. Then, we set TX power offset according to chip generation. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-4-pkshih@realtek.com
2023-10-05wifi: rtw89: phy: set TX power by rate according to chip genZong-Zhe Yang
Wi-Fi 6 chips and Wi-Fi 7 chips have different register design for TX power by rate. We rename original setting stuffs with a suffix `_ax` and implement setting flow for Wi-Fi 7 chips. Then, we set TX power by rate according to chip generation. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-3-pkshih@realtek.com
2023-10-05wifi: rtw89: mac: get TX power control register according to chip genZong-Zhe Yang
There are two difference between Wi-Fi 6 and Wi-Fi 7 chips. 1. Address range of TX power control register 2. Checking code to get a TX power control register So, separate the implementation of them, access according to chip generation, and rename original things with a suffix `_ax`. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231003015446.14658-2-pkshih@realtek.com
2023-10-05gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()Bartosz Golaszewski
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2023-10-05wifi: ath12k: fix debug messagesKalle Valo
In ath12k the debug messages were broken, no matter setting what value to the debug_mask module parameter would not get the debug messages printed. The issue is that __ath12k_dbg() uses dev_dbg() to print the debug messages which requires either enabling CONFIG_DYNAMIC_DEBUG or DEBUG symbol in the driver. ath12k is supposed to use debug_mask module to control whether debug messages are printed or not. Using both CONFIG_DYNAMIC_DEBUG and debug_mask parameter does not make any sense so switch to using dev_printk(), just like ath11k does. Now it's enough just to debug_mask module parameter to get the debug messages. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231003150132.187875-1-kvalo@kernel.org
2023-10-05wifi: ath11k: fix Tx power value during active CACAditya Kumar Singh
Tx power is fetched from firmware's pdev stats. However, during active CAC, firmware does not fill the current Tx power and sends the max initialised value filled during firmware init. If host sends this power to user space, this is wrong since in certain situations, the Tx power could be greater than the max allowed by the regulatory. Hence, host should not be fetching the Tx power during an active CAC. Fix this issue by returning -EAGAIN error so that user space knows that there's no valid value available. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: 9a2aa68afe3d ("wifi: ath11k: add get_txpower mac ops") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230912051857.2284-4-quic_adisi@quicinc.com
2023-10-05wifi: ath11k: fix CAC running state during virtual interface startAditya Kumar Singh
Currently channel definition's primary channel's DFS CAC time as well as primary channel's state i.e usable are used to set the CAC_RUNNING flag for the ath11k radio structure. However, this is wrong since certain channel definition are possbile where primary channel may not be a DFS channel but, secondary channel is a DFS channel. For example - channel 36 with 160 MHz bandwidth. In such cases, the flag will not be set which is wrong. Fix this issue by using cfg80211_chandef_dfs_usable() function from cfg80211 which return trues if at least one channel is in usable state. While at it, modify the CAC running debug log message to print the CAC time as well in milli-seconds. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230912051857.2284-3-quic_adisi@quicinc.com
2023-10-04ksmbd: fix race condition between tree conn lookup and disconnectNamjae Jeon
if thread A in smb2_write is using work-tcon, other thread B use smb2_tree_disconnect free the tcon, then thread A will use free'd tcon. Time + Thread A | Thread A smb2_write | smb2_tree_disconnect | | | kfree(tree_conn) | // UAF! | work->tcon->share_conf | + This patch add state, reference count and lock for tree conn to fix race condition issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG ↵Samson Tam
pipes only [Why] The edge-case DISPCLK WDIVIDER changes call stream_enc functions. But with MPC pipes, downstream pipes have null stream_enc and will cause crash. [How] Only call stream_enc functions for pipes that are OTG master. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix detection of _PR3 on the PCIe root portMario Limonciello
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma <Jun.Ma2@amd.com> Tested-by: David Perry <David.Perry@amd.com> Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()Mario Limonciello
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: stable@vger.kernel.org # 6.1+ Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amdgpu: Fix a memory leakLuben Tuikov
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd/pm: add unique_id for gc 11.0.3Kenneth Feng
add unique_id for gc 11.0.3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04ksmbd: fix race condition from parallel smb2 lock requestsNamjae Jeon
There is a race condition issue between parallel smb2 lock request. Time + Thread A | Thread A smb2_lock | smb2_lock | insert smb_lock to lock_list | spin_unlock(&work->conn->llist_lock) | | | spin_lock(&conn->llist_lock); | kfree(cmp_lock); | // UAF! | list_add(&smb_lock->llist, &rollback_list) + This patch swaps the line for adding the smb lock to the rollback list and adding the lock list of connection to fix the race issue. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition from parallel smb2 logoff requestsNamjae Jeon
If parallel smb2 logoff requests come in before closing door, running request count becomes more than 1 even though connection status is set to KSMBD_SESS_NEED_RECONNECT. It can't get condition true, and sleep forever. This patch fix race condition problem by returning error if connection status was already set to KSMBD_SESS_NEED_RECONNECT. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix uaf in smb20_oplock_break_ackluosili
drop reference after use opinfo. Signed-off-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition with fpNamjae Jeon
fp can used in each command. If smb2_close command is coming at the same time, UAF issue can happen by race condition. Time + Thread A | Thread B1 B2 .... B5 smb2_open | smb2_close | __open_id | insert fp to file_table | | | atomic_dec_and_test(&fp->refcount) | if fp->refcount == 0, free fp by kfree. // UAF! | use fp | + This patch add f_state not to use freed fp is used and not to free fp in use. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04ksmbd: fix race condition between session lookup and expireNamjae Jeon
Thread A + Thread B ksmbd_session_lookup | smb2_sess_setup sess = xa_load | | | xa_erase(&conn->sessions, sess->id); | | ksmbd_session_destroy(sess) --> kfree(sess) | // UAF! | sess->last_active = jiffies | + This patch add rwsem to fix race condition between ksmbd_session_lookup and ksmbd_expire_session. Reported-by: luosili <rootlab@huawei.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-10-04Merge tag 'rtla-v6.6-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux Pull rtla fixes from Daniel Bristot de Oliveira: "rtla (Real-Time Linux Analysis) tool fixes. Timerlat auto-analysis: - Timerlat is reporting thread interference time without thread noise events occurrence. It was caused because the thread interference variable was not reset after the analysis of a timerlat activation that did not hit the threshold. - The IRQ handler delay is estimated from the delta of the IRQ latency reported by timerlat, and the timestamp from IRQ handler start event. If the delta is near-zero, the drift from the external clock and the trace event and/or the overhead can cause the value to be negative. If the value is negative, print a zero-delay. - IRQ handlers happening after the timerlat thread event but before the stop tracing were being reported as IRQ that happened before the *current* IRQ occurrence. Ignore Previous IRQ noise in this condition because they are valid only for the *next* timerlat activation. Timerlat user-space: - Timerlat is stopping all user-space thread if a CPU becomes offline. Do not stop the entire tool if a CPU is/become offline, but only the thread of the unavailable CPU. Stop the tool only, if all threads leave because the CPUs become/are offline. man-pages: - Fix command line example in timerlat hist man page" * tag 'rtla-v6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bristot/linux: rtla: fix a example in rtla-timerlat-hist.rst rtla/timerlat: Do not stop user-space if a cpu is offline rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread sample rtla/timerlat_aa: Fix negative IRQ delay rtla/timerlat_aa: Zero thread sum after every sample analysis
2023-10-04Merge branch 'ynl-makefile-cleanup'Jakub Kicinski
Jakub Kicinski says: ==================== ynl Makefile cleanup While catching up on recent changes I noticed unexpected changes to Makefiles in YNL. Indeed they were not working as intended but the fixes put in place were not what I had in mind :) ==================== Link: https://lore.kernel.org/r/20231003153416.2479808-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tools: ynl: use uAPI include magic for samplesJakub Kicinski
Makefile.deps provides direct includes in CFLAGS_$(obj). We just need to rewrite the rules to make use of the extra flags, no need to hard-include all of tools/include/uapi. Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231003153416.2479808-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tools: ynl: don't regen on every makeJakub Kicinski
As far as I can tell the normal Makefile dependency tracking works, generated files get re-generated if the YAML was updated. Let make do its job, don't force the re-generation. make hardclean can be used to force regeneration. Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231003153416.2479808-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04ynl: netdev: drop unnecessary enum-as-flagsJakub Kicinski
enum-as-flags can be used when enum declares bit positions but we want to carry bitmask in an attribute. If the definition is already provided as flags there's no need to indicate the flag-iness of the attribute. Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231003153416.2479808-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003183455.3410550-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04net: skb_queue_purge_reason() optimizationsEric Dumazet
1) Exit early if the list is empty. 2) splice the list into a local list, so that we block hard irqs only once. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003181920.3280453-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-10-03 (i40e, iavf) This series contains updates to i40e and iavf drivers. Yajun Deng aligns reporting of buffer exhaustion statistics to follow documentation for i40e. Jake removes undesired 'inline' from functions in iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: iavf: remove "inline" functions from iavf_txrx.c i40e: Add rx_missed_errors for buffer exhaustion ==================== Link: https://lore.kernel.org/r/20231003223610.2004976-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge branch ↵Jakub Kicinski
'fix-a-couple-recent-instances-of-wincompatible-function-pointer-types-strict-from-mode_get-implementations' Nathan Chancellor says: ==================== Fix a couple recent instances of -Wincompatible-function-pointer-types-strict from ->mode_get() implementations This series fixes a couple of instances of -Wincompatible-function-pointer-types-strict that were introduced by a recent series that added a new type of ops, struct dpll_device_ops, along with implementations of the callback ->mode_get() that had a mismatched mode type. This warning is not currently enabled for any build but I am planning on submitting a patch to add it to W=1 to prevent new instances of the warning from popping up while we try and fix the existing instances in other drivers. This series is based on current net-next but if they need to go into individual maintainer trees, please feel free to take the patches individually. ==================== Link: https://lore.kernel.org/r/20231002-net-wifpts-dpll_mode_get-v1-0-a356a16413cf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 12:09:15 +0000