| Age | Commit message (Collapse) | Author |
|---|
|
I noticed that only 3 out of the 4 input bits were used,
mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked.
In order to avoid a complicated maze, I converted it to
use a 16 byte mapping table.
As shown in the table below the old heuristics doesn't
always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1
then it used to only match follow-up fragment packets.
Here are all the combinations, and their resulting new/old
VCAP key/mask filter:
/- FLOW_DIS_IS_FRAGMENT (key/mask)
| /- FLOW_DIS_FIRST_FRAG (key/mask)
| | /-- new VCAP fragment (key/mask)
v v v v- old VCAP fragment (key/mask)
0/0 0/0 -/- -/- impossible (due to entry cond. on mask)
0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag)
0/0 1/0 -/- -/- impossible (key > mask)
0/0 1/1 1/3 1/3 first fragment
0/1 0/0 0/3 3/3 !! not fragmented
0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment)
0/1 1/0 -/- -/- impossible (key > mask)
0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag)
1/0 0/0 -/- -/- impossible (key > mask)
1/0 0/1 -/- -/- impossible (key > mask)
1/0 1/0 -/- -/- impossible (key > mask)
1/0 1/1 -/- -/- impossible (key > mask)
1/1 0/0 1/1 3/3 !! some fragment
1/1 0/1 3/3 3/3 follow-up fragment
1/1 1/0 -/- -/- impossible (key > mask)
1/1 1/1 1/3 1/3 first fragment
In the datasheet the VCAP fragment values are documented as:
0 = no fragment
1 = initial fragment
2 = suspicious fragment
3 = valid follow-up fragment
Result: 3 combinations match the old behavior,
3 combinations have been corrected,
2 combinations are now invalid, and fail,
8 combinations are impossible.
It should now be aligned with how FLOW_DIS_IS_FRAGMENT
and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in
net/core/flow_dissector.c
Since the VCAP fragment values are not a bitfield, we have
to ignore the suspicious fragment value, eg. when matching
on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1.
Only compile tested, and logic tested in userspace, as I
unfortunately don't have access to this switch chip (yet).
Fixes: d6c2964db3fe ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable err is being assigned a zero value and it is never read
afterwards in either the break path or continue path, the assignment
is redundant and can be removed. With it removed, the if statement
can also be simplified.
Cleans up clang scan warning:
net/tipc/socket.c:3570:5: warning: Value stored to 'err' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240411091704.306752-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When TCP_TW_SYN is processed, we perform a lookup to find
a listener and jump back in tcp_v6_rcv() and tcp_v4_rcv()
Paolo suggested that we do not have to check if the
found socket is a TIME_WAIT or NEW_SYN_RECV one.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/netdev/68085c8a84538cacaac991415e4ccc72f45e76c2.camel@redhat.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240411082530.907113-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix MSG_OOB bugs with MSG_PEEK.
Currently, OOB data can be read without MSG_OOB accidentally
in two cases, and this seris fixes the bugs.
v1: https://lore.kernel.org/netdev/20240409225209.58102-1-kuniyu@amazon.com/
====================
Link: https://lore.kernel.org/r/20240410171016.7621-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, we can read OOB data without MSG_OOB by using MSG_PEEK
when OOB data is sitting on the front row, which is apparently
wrong.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
If manage_oob() is called when no data has been copied, we only
check if the socket enables SO_OOBINLINE or MSG_PEEK is not used.
Otherwise, the skb is returned as is.
However, here we should return NULL if MSG_PEEK is set and no data
has been copied.
Also, in such a case, we should not jump to the redo label because
we will be caught in the loop and hog the CPU until normal data
comes in.
Then, we need to handle skb == NULL case with the if-clause below
the manage_oob() block.
With this patch:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240410171016.7621-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we call recv() for AF_UNIX socket, we first peek one skb and
calls manage_oob() to check if the skb is sent with MSG_OOB.
However, when we fetch the next (and the following) skb, manage_oob()
is not called now, leading a wrong behaviour.
Let's say a socket send()s "hello" with MSG_OOB and the peer tries
to recv() 5 bytes with MSG_PEEK. Here, we should get only "hell"
without 'o', but actually not:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c2.recv(5, MSG_PEEK)
b'hello'
The first skb fills 4 bytes, and the next skb is peeked but not
properly checked by manage_oob().
Let's move up the again label to call manage_oob() for evry skb.
With this patch:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c2.recv(5, MSG_PEEK)
b'hell'
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240410171016.7621-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
Support some features for the HNS3 ethernet driver
Currently, the hns3 driver does not have the trace
of the command queue. As a result, it is difficult to
locate the communication between the driver and firmware.
Therefore, the trace function of the command queue is
added in this patch set to facilitate the locating of
communication problems between the driver and firmware.
If a RAS occurs, the driver will automatically reset to attempt
to recover the RAS. Therefore, to locate the cause of the RAS,
it is necessary to save the values of some RAS-related registers
before the reset. So we added a patch in this patch set to
print these information.
====================
Link: https://lore.kernel.org/r/20240410125354.2177067-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to query scc version by devlink info for device V3.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the driver received an interrupte for hardware error,
it will try to restore by resetting. But the hardware registers
will also be reset at this case, which make it hard to analysis
why the hardware error occurs.
This patch dumps these registers before resetting to help
analyze the hardware error occurs.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
some constants are defined in hclge_debugfs.h,
but only used in hclge_debugfs.c.
so move them from hclge_debugfs.h to hclge_debugfs.c.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240410125354.2177067-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to dump command queue trace for hns3.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240410125354.2177067-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Revert "NFC: fix attrs checks in netlink interface"
This reverts commit 18917d51472fe3b126a3a8f756c6b18085eb8130.
Our checks found weird attrs present check in function
nfc_genl_dep_link_down() and nfc_genl_llc_get_params(), which are
introduced by commit 18917d51472f ("NFC: fix attrs checks in netlink
interface").
According to its message, it should add checks for functions
nfc_genl_deactivate_target() and nfc_genl_fw_download(). However, it
didn't do that. In fact, the expected checks are added by
(1) commit 385097a36757 ("nfc: Ensure presence of required attributes in
the deactivate_target handler") and
(2) commit 280e3ebdafb8 ("nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME
attribute in nfc_genl_fw_download()"). Perhaps something went wrong.
Anyway, the attr NFC_ATTR_TARGET_INDEX is never accessed in callback
nfc_genl_dep_link_down() and same for NFC_ATTR_FIRMWARE_NAME and
nfc_genl_llc_get_params(). Thus, remove those checks.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20240410034846.167421-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Uwe Kleine-König says:
====================
ptp: Convert to platform remove callback returning void
this series converts all platform drivers below drivers/ptp/ to not use
struct platform_device::remove() any more. See commit 5c5a7680e67b
("platform: Provide a remove callback that returns no value") for an
extended explanation and the eventual goal.
All conversations are trivial, because the driver's .remove() callbacks
returned zero unconditionally.
====================
Link: https://lore.kernel.org/r/cover.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/477c6995046eee729447d4f88bf042c7577fe100.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/2cc6c137dd43444abb5bdb53693713f7c2c08b71.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/5807d0b11214b35f48908fd35cbb7b31b7655ba6.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/e8a0de7e8e6d642242350360a938132c7ba0488e.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/0f0f5680c1a2a3ef19975935a2c6828a98bc4d25.1712734365.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Even though the command duration limits (CDL) feature was first added
in ACS-5 (major version 12), there are some ACS-4 (major version 11)
drives that implement CDL as well.
IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages
are mandatory in the ACS-4 standard so it should be safe to read these
log pages on older drives implementing the ACS-4 standard.
Fixes: 62e4a60e0cdb ("scsi: ata: libata: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Florian Westphal says:
====================
selftests: move netfilter tests to net
First patch in this series moves selftests/netfilter/
to selftests/net/netfilter/.
Passing this via net-next rather than nf-next for this reason.
Main motivation is that a lot of these scripts only work on my old
development VM, I hope that placing this in net/ will get these
tests to get run in more regular intervals (and tests get more robust).
Changes are:
- make use of existing 'setup_ns' and 'busywait' helpers
- fix shellcheck warnings
- add more SKIP checks to avoid failures
- get rid of netcat in favor of socat, too many test
failures due to 'wrong' netcat flavor
- do not assume rp_filter sysctl is off
I have more patches that fix up the remaining test scripts,
but the series was too large to send them at once (34 patches).
After all scripts are fixed up, tests pass on both my Debian
and Fedora test machines.
MAINTAINERS is updated to reflect that future updates should be handled
via netfilter-devel@.
====================
Link: https://lore.kernel.org/r/20240411233624.8129-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use busywait helper to wait until socat listener is up to avoid "sleep" calls.
This reduces script execution time slighty (12s to 7s).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-16-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use socat, the different nc implementations have too much variance wrt.
supported options.
Avoid sleeping until listener is up, use busywait helper for this,
this also greatly reduces test duration.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-15-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Also lower ping interval, wait times (helpers get called several times)
and set nodad for ipv6 addresses: 20s down to 4s.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-14-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prefer socat over nc, nc has too many incompatible versions around.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-13-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While at it, use checktool helper.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-12-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The setup_ns helper makes the netns names random, so replace nsX with $nsX
everywhere.
Replace nc with socat, otherwise script fails on my system due to
incompatible nc versions ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-11-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
... so it doesn't have to be repeated everywhere.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-10-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-9-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
swap test for "ip" with "conntrack", former is already accounted for
via setup_ns helper. Also switch to bash.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-8-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While at it, address warnings generated by shellcheck and fix following
minor issues:
- some distros place netem in 'extra' modules package, so add a skip check for netem-attach
failure.
- tc prints a warning for the 100mbit class:
"Warning: sch_htb: quantum of class 10001 is big. Consider r2q change."
Silence this by increasing the divisor.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace nc with socat. Too many different implementations of nc
are around with incompatible options ("nc: cannot use -p and -l").
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only relevant change is that netns names have random suffix names,
i.e. its safe to run this in parallel with other tests.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Also, fix two issues reported by Pablo Neira:
1. Must modprobe br_netfilter in case its not loaded,
else sysctl cannot be set.
2. ping for netns4 fails if rp_filter is enabled in bridge netns,
so set all and default to 0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-4-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Doing so gets us dynamically generated netns names.
Also:
* do not assume rp_filter is disabled, if its on script failed
* reduce timeout (-W) for "expected to fail" ping commands
* don't print PASS line for basic sanity ping
* shellcheck cleanups
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
.. so this can start re-using existing lib.sh infra in next patches.
Several of these scripts will not work, e.g. because they assume
rp_filter is disabled, or reliance on a particular version/flavor
of "netcat" tool.
Add config settings for them.
nft_trans_stress.sh script is removed, it also exists in the nftables
userspace selftests. I do not see a reason to keep two versions in
different repositories/projects.
The settings file is removed for now:
It was used to increase the timeout to avoid slow scripts from getting
zapped by the 45s timeout, but some of the slow scripts can be sped up.
Re-add it later for scripts that cannot be sped up easily.
Update MAINTAINERS to reflect that future updates to netfilter
scripts should go through netfilter-devel@.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240411233624.8129-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
incorrectly handles failures of scsi_resume_device() in
ata_scsi_dev_rescan(), leading to a double call to
spin_unlock_irqrestore() to unlock a device port. Fix this by redefining
the goto labels used in case of errors and only unlock the port
scsi_scan_mutex when scsi_resume_device() fails.
Bug found with the Smatch static checker warning:
drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan()
error: double unlocked 'ap->lock' (orig line 4757)
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d Fixes:
- Allocate local memory for PRQ page
- Fix WARN_ON in iommu probe path
- Fix wrong use of pasid config
- AMD IOMMU Fixes:
- Lock inversion fix
- Log message severity fix
- Disable SNP when v2 page-tables are used
- Mediatek driver:
- Fix module autoloading
* tag 'iommu-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Change log message severity
iommu/vt-d: Fix WARN_ON in iommu probe path
iommu/vt-d: Allocate local memory for page request queue
iommu/vt-d: Fix wrong use of pasid config
iommu: mtk: fix module autoloading
iommu/amd: Do not enable SNP when V2 page table is enabled
iommu/amd: Fix possible irq lock inversion dependency issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a quirk that prevented Secondary Bus Reset for LSI / Agere
FW643.
We thought the device was broken, but the reset does work correctly
on other platforms, and the reset avoids leaking data out of VMs
(Bjorn Helgaas)
- Update MAINTAINERS to reflect that Gustavo Pimentel is no longer
reachable (Manivannan Sadhasivam)
* tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Mark LSI FW643 to avoid bus reset"
MAINTAINERS: Drop Gustavo Pimentel as PCI DWC Maintainer
|
|
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The ice physical function driver needs to configure the association of
queues and interrupts on behalf of its virtual functions. This is done over
virtchnl by the VF sending messages during its initialization phase. These
messages contain a vector_id which the VF wants to associate with a given
queue. This ID is relative to the VF space, where 0 indicates the control
IRQ for non-queue interrupts.
When programming the mapping, the PF driver currently passes this vector_id
directly to the low level functions for programming. This works for SR-IOV,
because the hardware uses the VF-based indexing for interrupts.
This won't work for Scalable IOV, which uses PF-based indexing for
programming its VSIs. To handle this, the driver needs to be able to look
up the proper index to use for programming. For typical IRQs, this would be
the q_vector->reg_idx field.
The q_vector->reg_idx can't be set to a VF relative value, because it is
used when the PF needs to control the interrupt, such as when triggering a
software interrupt on stopping the Tx queue. Thus, introduce a new
q_vector->vf_reg_idx which can store the VF relative index for registers
which expect this.
Use this in ice_cfg_interrupt to look up the VF index from the q_vector.
This allows removing the vector ID parameter of ice_cfg_interrupt. Also
notice that this function returns an int, but then is cast to the virtchnl
error enumeration, virtchnl_status_code. Update the return type to indicate
it does not return an integer error code. We can't use normal error codes
here because the return values are passed across the virtchnl interface.
This will allow the future Scalable IOV VFs to correctly look up the index
needed for programming the VF queues without breaking SR-IOV.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit fe1c5ca2fe76 ("ice: implement num_msix field per VF") updated the
driver to allow for per-VF MSI-X configuration. The initial defaults were
set in ice_create_vf_entries(). This logic is better placed in
ice_initialize_vf_entry(). Indeed, that function already sets
vf->num_vf_qs, as well as initializes the allow list via calling
ice_vc_set_default_allowlist().
Move this logic into ice_initialize_vf_entry(). This makes the code clear,
and ensures that these VF fields will be initialized properly for both
SR-IOV VFs and the upcoming Scalable IOV VFs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for 'flow-type ether' Flow Director rules via ethtool.
Create packet segment info for filter configuration based on ethtool
command parameters. Reuse infrastructure already created for
ipv4 and ipv6 flows to convert packet segment into
extraction sequence, which is later used to program the filter
inside Flow Director block of the Rx pipeline.
Rules not containing masks are processed by the Flow Director,
and support the following set of input parameters in all combinations:
src, dst, proto, vlan-etype, vlan, action.
It is possible to specify address mask in ethtool parameters but only
00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
The same applies to proto, vlan-etype and vlan masks:
only 0x0000 and 0xffff masks are valid.
Testing:
(DUT) iperf3 -s
(DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \
action 10
(DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue'
(LP) iperf3 -c ${DUT_IP}
Counters increase only for:
'rx_queue_10_packets'
'rx_queue_10_bytes'
Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- UAF fix (Yu)
- Avoid out-of-bounds shift in blk-iocost (Rik)
- Fix for q->blkg_list corruption (Ming)
- Relax virt boundary mask/size segment checking (Ming)
* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
block: fix that blk_time_get_ns() doesn't update time after schedule
block: allow device to have both virt_boundary_mask and max segment size
block: fix q->blkg_list corruption during disk rebind
blk-iocost: avoid out of bounds shift
raid1: fix use-after-free for original bio in raid1_write_request()
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for sigmask restoring while waiting for events (Alexey)
- Typo fix in comment (Haiyue)
- Fix for a msg_control retstore on SEND_ZC retries (Pavel)
* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
io_uring/net: restore msg_control on sendzc retry
io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
|
|
Pull ceph fixes from Ilya Dryomov:
"Two CephFS fixes marked for stable and a MAINTAINERS update"
* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
MAINTAINERS: remove myself as a Reviewer for Ceph
ceph: switch to use cap_delay_lock for the unlink delay list
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
|
|
Commit d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.
It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.
In fact, let's make such breakage more obvious than some esoteric ftrace
record size option. If you can't parse tabs, you can't have page sizes.
Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard. But no, that does not
mean that it's ok.
I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary. But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.
Fixes: d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Passing v6 argument is unnecessary as flow_type is still
analyzed inside the function.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the buffer_percent accounting as it is dependent on three
variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active
pages there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched.
But the pages touched was incremented whenever any writer went to the
next subbuffer even if it wasn't the only one, so it was incremented
more than it should be causing the counter for how many subbuffers
currently have content incorrect, which caused the buffer_percent
that holds waiters until the ring buffer is filled to a given
percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Only update pages_touched when a new page is touched
tracing: hide unused ftrace_event_id_fops
tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
eventfs: Fix kernel-doc comments to functions
|
