| Age | Commit message (Collapse) | Author |
|---|
|
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4a0 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
(cherry picked from commit da9b1c61e7f7b327dd70c5f073ba04d419a55ef8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
3 DSC engines per pipe is currently supported only for BMG.
Add a macro to check whether a platform supports 3 DSC engines per pipe.
v2:Fix Typo in macro argument. (Suraj).
Added fixes tag.
Bspec: 50175
Fixes: be7f5fcdf4a0 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414085701.2802374-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 6998cfce0e1db58c730d08cadc6bfd71e26e2de0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix niu_try_msix() to not cause a fatal trap on sparc systems.
Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to
work around a bug in the hardware or firmware.
For each vector entry in the msix table, niu chips will cause a fatal
trap if any registers in that entry are read before that entries'
ENTRY_DATA register is written to. Testing indicates writes to other
registers are not sufficient to prevent the fatal trap, however the value
does not appear to matter. This only needs to happen once after power up,
so simply rebooting into a kernel lacking this fix will NOT cause the
trap.
NON-RESUMABLE ERROR: Reporting on cpu 64
NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0>
NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff
NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000]
NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff]
NON-RESUMABLE ERROR: type [precise nonresumable]
NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv >
NON-RESUMABLE ERROR: raddr [0xffffffffffffffff]
NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c]
NON-RESUMABLE ERROR: size [0x8]
NON-RESUMABLE ERROR: asi [0x00]
CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63
Workqueue: events work_for_cpu_fn
TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted
TPC: <msix_prepare_msi_desc+0x90/0xa0>
g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100
g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000
o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620
o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128
RPC: <__pci_enable_msix_range+0x3cc/0x460>
l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020
l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734
i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d
i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0
I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]>
Call Trace:
[<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu]
[<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu]
[<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu]
[<00000000005ef3e4>] local_pci_probe+0x28/0x74
[<0000000000469240>] work_for_cpu_fn+0x8/0x1c
[<000000000046b008>] process_scheduled_works+0x144/0x210
[<000000000046b518>] worker_thread+0x13c/0x1c0
[<00000000004710e0>] kthread+0xb8/0xc8
[<00000000004060c8>] ret_from_fork+0x1c/0x2c
[<0000000000000000>] 0x0
Kernel panic - not syncing: Non-resumable error.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-3-dullfire@yahoo.com
|
|
Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
|
|
The user can set any value for 'deadtime'. This affects the arithmetic
expression 'req->deadtime * SMB_ECHO_INTERVAL', which is subject to
overflow. The added check makes the server behavior more predictable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
[ 2110.972290] ------------[ cut here ]------------
[ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280
This patch doesn't allow writing to directory.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a room in smb_break_all_levII_oplock that can cause racy issues
when unlocking in the middle of the loop. This patch use read lock
to protect whole loop.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:
do not call blocking ops when !TASK_RUNNING; state=2 set at
[<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160
mutex lock is not needed in ksmbd_durable_scavenger_alive().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
krb_authenticate frees sess->user and does not set the pointer
to NULL. It calls ksmbd_krb5_authenticate to reinitialise
sess->user but that function may return without doing so. If
that happens then smb2_sess_setup, which calls krb_authenticate,
will be accessing free'd memory when it later uses sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It's not safe to access nla_len(ovs_key) if the data is smaller than
the netlink header. Check that the attribute is OK first.
Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Reported-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b07a9da40df1576b8048
Tested-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250412104052.2073688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix PTM timeout
Christopher S M Hall says:
There have been sporadic reports of PTM timeouts using i225/i226 devices
These timeouts have been root caused to:
1) Manipulating the PTM status register while PTM is enabled
and triggered
2) The hardware retrying too quickly when an inappropriate response
is received from the upstream device
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
The first patch in this series also resolves an issue reported by Corinna
Vinschen relating to kdump:
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not zero, but extremly reduced.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: add lock preventing multiple simultaneous PTM transactions
igc: cleanup PTP module if probe fails
igc: handle the IGC_PTP_ENABLED flag correctly
igc: move ktime snapshot into PTM retry loop
igc: increase wait time before retrying PTM
igc: fix PTM cycle trigger logic
====================
Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f202 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lockdep found the following dependency:
&dev_instance_lock_key#3 -->
&rdev->wiphy.mtx -->
&net->xdp.lock -->
&xs->mutex -->
&dev_instance_lock_key#3
The first dependency is the problem. wiphy mutex should be outside
the instance locks. The problem happens in notifiers (as always)
for CLOSE. We only hold the instance lock for ops locked devices
during CLOSE, and WiFi netdevs are not ops locked. Unfortunately,
when we dev_close_many() during netns dismantle we may be holding
the instance lock of _another_ netdev when issuing a CLOSE for
a WiFi device.
Lockdep's "Possible unsafe locking scenario" only prints 3 locks
and we have 4, plus I think we'd need 3 CPUs, like this:
CPU0 CPU1 CPU2
---- ---- ----
lock(&xs->mutex);
lock(&dev_instance_lock_key#3);
lock(&rdev->wiphy.mtx);
lock(&net->xdp.lock);
lock(&xs->mutex);
lock(&rdev->wiphy.mtx);
lock(&dev_instance_lock_key#3);
Tho, I don't think that's possible as CPU1 and CPU2 would
be under rtnl_lock. Even if we have per-netns rtnl_lock and
wiphy can span network namespaces - CPU0 and CPU1 must be
in the same netns to see dev_instance_lock, so CPU0 can't
be installing a socket as CPU1 is tearing the netns down.
Regardless, our expected lock ordering is that wiphy lock
is taken before instance locks, so let's fix this.
Go over the ops locked and non-locked devices separately.
Note that calling dev_close_many() on an empty list is perfectly
fine. All processing (including RCU syncs) are conditional
on the list not being empty, already.
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+6f588c78bf765b62b450@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250412233011.309762-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gpiod_direction_output_raw_commit() function checks if any setter
callback is present before doing anything. As the new GPIO setters with
return values were introduced, make this check also succeed if one is
present.
Fixes: 98ce1eb1fd87 ("gpiolib: introduce gpio_chip setters that return values")
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250411-mdb-gpiolib-setters-fix-v2-1-9611280d8822@bootlin.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Fix hang in bnxt_re due to miscomputing the budget
- Avoid a -Wformat-security message in dev_set_name()
- Avoid an unused definition warning in fs.c with some kconfigs
- Fix error handling in usnic and remove IS_ERR_OR_NULL() usage
- Regression in RXE support foudn by blktests due to missing ODP
exclusions
- Set the dma_segment_size on HNS so it doesn't corrupt DMA when using
very large IOs
- Move a INIT_WORK to near when the work is allocated in cm.c to fix a
racey crash where work in progress was being init'd
- Use __GFP_NOWARN to not dump in kvcalloc() if userspace requests a
very big MR
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Remove unusable nq variable
RDMA/core: Silence oversized kvmalloc() warning
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
RDMA/hns: Fix wrong maximum DMA segment size
RDMA/rxe: Fix null pointer dereference in ODP MR check
RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set
RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()
RDMA/ucaps: Avoid format-security warning
RDMA/bnxt_re: Fix budget handling of notification queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
|
|
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which
completely disregards the cmdline passed from the bootloader/QEMU in favor
of the builtin CONFIG_CMDLINE.
However the kunit tool needs to pass arguments to the in-kernel kunit core,
for filters and other runtime parameters.
Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected.
Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de
Fixes: 8110a3cab05e ("kunit: tool: Add support for SH under QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit b52aaeeadfac ("cpufreq: intel_pstate: Avoid SMP calls to get
cpu-type") introduced two issues into hwp_get_cpu_scaling(). First,
it made that function use the CPU type of the CPU running the code
even though the target CPU is passed as the argument to it and second,
it used smp_processor_id() for that even though hwp_get_cpu_scaling()
runs in preemptible context.
Fix both of these problems by simply passing "cpu" to cpu_data().
Fixes: b52aaeeadfac ("cpufreq: intel_pstate: Avoid SMP calls to get cpu-type")
Link: https://lore.kernel.org/linux-pm/20250412103434.5321-1-xry111@xry111.site/
Reported-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12659608.O9o76ZdvQC@rjwysocki.net
|
|
Starting with Rust 1.86.0 (see upstream commit b151b513ba2b ("Insert null
checks for pointer dereferences when debug assertions are enabled") [1]),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R..._6kernel9workqueue6system()
falls through to next function _R...9workqueue14system_highpri()
due to a call to the `noreturn` symbol:
core::panicking::panic_null_pointer_dereference
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
Link: https://github.com/rust-lang/rust/commit/b151b513ba2b65c7506ec1a80f2712bbd09154d1 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250413002338.1741593-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Typically pdev->irq is consistent with whether the device itself
supports INTx, where device support is reported via the PIN register.
Therefore the PIN register is often already zero if pdev->irq is zero.
Recently virtualization of the PIN register was expanded to include
the case where the device supports INTx but the platform does not
route the interrupt. This is reported by a value of IRQ_NOTCONNECTED
on some architectures. Other architectures just report zero for
pdev->irq.
We already disallow INTx setup if pdev->irq is zero, therefore add
this to the PIN register virtualization criteria so that a consistent
view is provided to userspace through virtualized config space and
ioctls.
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/all/174231895238.2295.12586708771396482526.stgit@linux.ibm.com/
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/r/20250320194145.2816379-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
When registering a queue fails after blk_mq_sysfs_register() is
successful but the function later encounters an error, we need
to clean up the blk_mq_sysfs resources.
Add the missing blk_mq_sysfs_unregister() call in the error path
to properly clean up these resources and prevent a memory leak.
Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250412092554.475218-1-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add an SPDX license identifier line to blk-throttle.h
Use 'GPL-2.0' as the identifier, since blk-throttle.c uses
that, and blk.h (from which some material was copied when
blk-throttle.h was created) also uses that identifier.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/MW5PR13MB5632EE4645BCA24ED111EC0EFDB62@MW5PR13MB5632.namprd13.prod.outlook.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If KASAN is enabled, and one runs in a clean repository e.g.:
make LLVM=1 prepare
make LLVM=1 prepare
Then the Rust code gets rebuilt, which should not happen.
The reason is some of the LLVM KASAN `rustc` flags are added in the
second run:
-Cllvm-args=-asan-instrumentation-with-call-threshold=10000
-Cllvm-args=-asan-stack=0
-Cllvm-args=-asan-globals=1
-Cllvm-args=-asan-kernel-mem-intrinsic-prefix=1
Further runs do not rebuild Rust because the flags do not change anymore.
Rebuilding like that in the second run is bad, even if this just happens
with KASAN enabled, but missing flags in the first one is even worse.
The root issue is that we pass, for some architectures and for the moment,
a generated `target.json` file. That file is not ready by the time `rustc`
gets called for the flag test, and thus the flag test fails just because
the file is not available, e.g.:
$ ... --target=./scripts/target.json ... -Cllvm-args=...
error: target file "./scripts/target.json" does not exist
There are a few approaches we could take here to solve this. For instance,
we could ensure that every time that the config is rebuilt, we regenerate
the file and recompute the flags. Or we could use the LLVM version to
check for these flags, instead of testing the flag (which may have other
advantages, such as allowing us to detect renames on the LLVM side).
However, it may be easier than that: `rustc` is aware of the `-Cllvm-args`
regardless of the `--target` (e.g. I checked that the list printed
is the same, plus that I can check for these flags even if I pass
a completely unrelated target), and thus we can just eliminate the
dependency completely.
Thus filter out the target.
This does mean that `rustc-option` cannot be used to test a flag that
requires the right target, but we don't have other users yet, it is a
minimal change and we want to get rid of custom targets in the future.
We could only filter in the case `target.json` is used, to make it work
in more cases, but then it would be harder to notice that it may not
work in a couple architectures.
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: stable@vger.kernel.org
Fixes: e3117404b411 ("kbuild: rust: Enable KASAN support")
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250408220311.1033475-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.86.0, Clippy's `needless_continue` lint complains
about the last statement of a loop [1], including cases like:
while ... {
match ... {
... if ... => {
...
return ...;
}
_ => continue,
}
}
as well as nested `match`es in a loop.
One solution is changing `continue` for `()` [2], but arguably using
`continue` shows the intent better when it is alone in an arm like that.
Moreover, I am not sure we want to force people to try to find other
ways to write the code either, in cases when that applies.
In addition, the help text does not really apply in the new cases the
lint has introduced, e.g. here one cannot simply "drop" the expression:
warning: this `continue` expression is redundant
--> rust/macros/helpers.rs:85:18
|
85 | _ => continue,
| ^^^^^^^^
|
= help: consider dropping the `continue` expression
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_continue
= note: requested on the command line with `-W clippy::needless-continue`
The examples in the documentation do not show a case like this, either,
so the second "help" line does not help.
In addition, locally disabling the lint is not possible with `expect`,
since the behavior differs across versions. Using `allow` would be
possible, but, even then, an extra line just for this is a bit too much,
especially if there are other ways to satisfy the lint.
Finally, the lint is still in the "pedantic" category and disabled by
default by Clippy.
Thus disable the lint, at least for the time being.
Feedback was submitted to upstream Clippy, in case this can be improved
or perhaps the lint split into several [3].
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/13891 [1]
Link: https://lore.kernel.org/rust-for-linux/20250401221205.52381-1-ojeda@kernel.org/ [2]
Link: https://github.com/rust-lang/rust-clippy/issues/14536 [3]
Link: https://lore.kernel.org/r/20250403163805.67770-1-ojeda@kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We need to provide all six forms of the alternative macros
(ALTERNATIVE, ALTERNATIVE_2, _ALTERNATIVE_CFG, _ALTERNATIVE_CFG_2,
__ALTERNATIVE_CFG, __ALTERNATIVE_CFG_2) for all four cases derived
from the two ifdefs (RISCV_ALTERNATIVE, __ASSEMBLY__) in order to
ensure all configs can compile. Define this missing ones and ensure
all are defined to consume all parameters passed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504130710.3IKz6Ibs-lkp@intel.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250414120947.135173-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
apply_r_riscv_plt32_rela() may need to emit a PLT entry for the
referenced symbol, so there must be space allocated in the PLT.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-2-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression.
Fixes: 080c4324fa5e ("riscv: optimize ELF relocation function in riscv")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409171526.862481-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The /proc/iomem represents the kernel's memory map. Regions marked
with "Reserved" tells the user that the range should not be tampered
with. Kexec-tools, when using the older kexec_load syscall relies on
the "Reserved" regions to build the memory segments, that will be the
target of the new kexec'd kernel.
The RISC-V port tries to expose all reserved regions to userland, but
some regions were not properly exposed: Regions that resided in both
the "regular" and reserved memory block, e.g. the EFI Memory Map. A
missing entry could result in reserved memory being overwritten.
It turns out, that arm64, and loongarch had a similar issue a while
back:
commit d91680e687f4 ("arm64: Fix /proc/iomem for reserved but not memory regions")
commit 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Similar to the other ports, resolve the issue by splitting the regions
in an arch initcall, since we need a working allocator.
Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409182129.634415-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Ensure we only print messages about command line parameters when
the parameters are actually in use. Also complain about the use
of the vector parameter when vector support isn't available.
Fixes: aecb09e091dc ("riscv: Add parameter for skipping access speed tests")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVEp2_ho51gkpLLJG2HimqZ1gZ0fa=JA4uNNZjFFqaPMg@mail.gmail.com/
Closes: https://lore.kernel.org/all/CAMuHMdWVMP0MYCLFq+b7H_uz-2omdFiDDUZq0t_gw0L9rrJtkQ@mail.gmail.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409153650.84433-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Set use_gpio_descriptors to true so that GPIOs can be used for chip
select in accordance with the DT binding.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250410115303.5150-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Prior to commit e614a00117bc2d, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117bc2d ("xfs: cleanup mapping tmpfs folios into the buffer cache")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250410071406.9669-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250410071406.9669-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the initial device tree for the Renesas RZ/V2N EVK board, based on
the R9A09G056N48 SoC. Enable basic board functionality, including:
- Memory mapping (reserve the first 128MB for the secure area)
- Clock inputs (QEXTAL, RTXIN, AUDIO_EXTAL)
- PINCTRL configurations for peripherals
- Serial console (SCIF)
- SDHI1 with power control and UHS modes
Update the Makefile to include the new DTB.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the initial Device Tree Source Include (DTSI) file for the Renesas
RZ/V2N (R9A09G056) SoC. Include support for the following components:
- CPU (Cortex-A55 cores with operating points)
- External clocks (audio, qextal, rtxin)
- Pin controller (GPIO support)
- Clock Pulse Generator (CPG)
- System controller (SYS)
- Serial Communication Interface (SCIF)
- Secure Digital Host Interface (SDHI 0/1/2)
- Generic Interrupt Controller (GIC)
- ARMv8 timer
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Renesas RZ/V2N DT Bindings and Definitions
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
|
|
Add documentation for the pin controller found on the Renesas RZ/V2N
(R9A09G056) SoC. The RZ/V2N PFC differs slightly from the RZ/G2L family
and is almost identical to the RZ/V2H(P) SoC, except that the RZ/V2H(P) SoC
has an additional dedicated pin.
To account for this, a SoC-specific compatible string,
'renesas,r9a09g056-pinctrl', is introduced for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document the device tree bindings for the Renesas RZ/V2N (R9A09G056)
SoC Clock Pulse Generator (CPG).
Update `renesas,rzv2h-cpg.yaml` to include the compatible string for
RZ/V2N SoC and adjust the title and description accordingly.
Additionally, introduce `renesas,r9a09g056-cpg.h` to define core clock
constants for the RZ/V2N SoC. Note the existing RZ/V2H(P) family-specific
clock driver will be reused for this SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System
Controller (SYS) binding, as both IPs are very similar.
However, they have different SoC IDs, and the RZ/V2N does not have
PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle
these differences, introduce a new compatible string
`renesas,r9a09g056-sys`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing
between configurations with and without specific hardware features such
as GPU, ISP, and cryptographic extensions. Also, document the
"renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec503f3 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c37
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The keys are connected to the I2C GPIO extender which has the interrupt
pin not connected. So, we need to poll.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-12-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The actual sensor might differ, but all known are LM75B compatible.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-10-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Schematics mention a 24cs64 on the bus, but I definitely have only a
24c64. So, it is only mentioned as a comment.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
