summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-22mwifiex: rename mwifiex_free_adapter() routine in init.cAmitkumar Karwar
We have two different static routines with name mwifiex_free_adapter(). The routine in main.c actually frees the adapter structure. We will rename other routine in init.c to mwifiex_adapter_cleanup() to avoid confusion. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22bcma: support SPROM rev 10Rafał Miłecki
This is pretty much the same as rev 9, there are just 2 extra fields we know about, but are not used/stored yet anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22bcma: prepare for supporting more SPROM sizesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22bcma: don't hardcode SPROM lengthRafał Miłecki
Pass it as an argument to all functions. This is requires as newer SPROM revisions have different lengths. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: do not stop Tx queue on packet dropVladimir Kondratiev
Packet drop may be caused by various flows, like disconnect while Tx packets was queued; this should not lead to stopping of the Tx queue, or all Tx get stalled. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: fix remaining use of non-cached copy of tx/rx descriptorsVladimir Kondratiev
- Introduce common code for Tx/Rx descriptor physical address set/parse - Fix endianness for address fields - consistent descriptor naming: '_d' for non-cached memory, 'd' for cached copy - wil_tx_desc_map now modify cached copy, no need for 'volatile' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: use NAPIVladimir Kondratiev
Introduce NAPI for Rx and Tx completion. This fixes packet reordering that happens when Rx handled right in the IRQ: netif_rx puts packet in 'percpu' queue, then network stack fetches packets from 'percpu' queues for processing, with different pattern of queue switching. As result, network stack see packets in different order. This causes hard to understand TCP throughput degradation in about 30min Complete polling if only one packet was processed - this eliminates empty polls that would be otherwise done at the end of each burst Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: trace supportVladimir Kondratiev
Trace the following: - WMI cmd/event - log events - interrupts - Tx/Rx Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22avr32: fix building warnings caused by redefinitions of HZJiang Liu
As suggested by David Howells <dhowells@redhat.com>, use asm-generic/param.h and uapi/asm-generic/param.h for AVR32. It also fixes building warnings caused by redefinitions of HZ: In file included from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:6:1: warning: "HZ" redefined In file included from /ws/linux/kernel/linux.git/arch/avr32/include/asm/param.h:4, from /ws/linux/kernel/linux.git/include/uapi/linux/param.h:4, from include/linux/timex.h:63, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, from include/linux/srcu.h:34, from include/linux/notifier.h:15, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:777, from include/linux/gfp.h:4, from arch/avr32/mm/init.c:10: /ws/linux/kernel/linux.git/arch/avr32/include/uapi/asm/param.h:6:1: warning: this is the location of the previous definition Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2013-05-22wil6210: debug dump packet content right after DMAVladimir Kondratiev
Move packet dump to the earliest location where it is known to have valid data. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: Sanity check for reported DMA lengthVladimir Kondratiev
If Rx descriptor contains garbage, it is possible to access memory beyond allocated buffer. Check this condition and drop Rx if reported length is unreasonable large Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: 'length' in Tx/Rx descriptors is little endianVladimir Kondratiev
Hardware uses little endian for the Tx/Rx descriptors field 'length', do appropriate conversions Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: use ap style beaconing for meshThomas Pedersen
Chun-Yeow and Javier Lopez contributed these changes to make mesh mode use the more similar AP beaconing mode and queue parameters. Should improve PS performance, interface concurrency (AP modes can coexist), and beacon interval stability. AR9271 (ath9k_htc) mesh interfaces also need to be in AP operating mode. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k_htc: Claim support for mgmt frame protectionJavier Cardona
Advertise support for management frame protection in hardware. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k_htc: Add support for mesh interfacesJavier Cardona
More specifically, enable AP-style beaconing on mesh ifaces and change the hw capabilities to reflect mesh support. Coexistence with a virtual STA interface was tested as working fine. Signed-off-by: Javier Cardona <javier@cozybit.com> [rebase, add iface combinations] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: Do not use local_bh_disable in ampdu_actionSujith Manoharan
This was added during the early conversion of ampdu_action to a sleeping callback. There is no need to do this - instead, use the normal mutex that is acquired for all callbacks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: Use bitops for scan flagSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: Remove MAC_DEBUGSujith Manoharan
This option has not been enabled by default in any distribution, has never been enabled in OpenWrt and no developer has asked for this information in a bug report. Dumping pages of random values doesn't help debugging, remove this option (along with the vmalloc() abuse). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00pci: Use PCI MSIs whenever possibleJakub Kicinski
All PCIe devices must support MSIs, make use of them. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2x00dev: defer operational mode detectionGabor Juhos
Only do it after the queues are allocated. This will allow to use the 'rt2x00dev->bcn->limit' instead of 'rt2x00dev->ops->bcn->entry_num'. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2800lib: use rt2x00dev->bcn->winfo_sizeGabor Juhos
The beacon data queue is initialized already when the rt2800_clear_beacon_register() function is called. Fetch the size of the TXWI descriptor from that instead of using the winfo_size field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->bcn->winfo_size value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2800usb: use rt2x00dev->rx->limitGabor Juhos
The RX data queue is initialized already when the rt2800_usb_enable_radio() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->rx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2800pci: use rt2x00dev->tx->limitGabor Juhos
The TX data queue is initialized already when the rt2800pci_txstatus_interrupt() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt61pci: use rt2x00dev->tx->limitGabor Juhos
The TX data queue is initialized already when the rt61pci_txdone() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22rt2x00: rt2x00dev: use rt2x00dev->tx->limitGabor Juhos
The TX data queue is initialized already when the rt2x00lib_probe_hw() function is called. Fetch the number of the queue entries from that instead of using the entry_num field of the data queue descriptor. The two values are the same, and the use of the rt2x00dev->tx->limit value allows us to get rid of a superfluous pointer dereference. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22SUNRPC: Prevent an rpc_task wakeup raceTrond Myklebust
The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2013-05-22atmel: printing bogus informationDan Carpenter
There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ASoC: cs42l52: fix master playback mute mask.Nicolas Schichan
The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-22ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" ↵Nicolas Schichan
controls. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-22ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register.Nicolas Schichan
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-22ath9k: prevent aggregation session deadlocksFelix Fietkau
Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22Samuel Ortiz <sameo@linux.intel.com> says:John W. Linville
"Merge tag 'nfc-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes This is the first batch of NFC fixes for 3.10, and it contains: - 3 fixes for the NFC MEI support: * We now depend on the correct Kconfig symbol. * We register an MEI event callback whenever we enable an NFC device, otherwise we fail to read anything after an enable/disable cycle. * We only disable an MEI device from its disable mey_phy_ops, preventing useless consecutive disable calls. - An NFC Makefile cleanup, as I forgot to remove a commented out line when moving the LLCP code to the NFC top level directory." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22Merge tag 'efi-urgent' into x86/urgentH. Peter Anvin
* Avoid confusing the user by returning -EIO instead of -ENOENT in efivarfs if an EFI variable gets deleted from under us and return EOF when reading from a zero-length file - Lingzhu Xiang * Fix an oops in efivar_update_sysfs_entries() caused by reusing (and therefore corrupting) a kzalloc() allocation - Seiji Aguchi * Initialise the DataSize argument to GetVariable() otherwise it will not be updated with the actual size of the variable on return. Discovered on a Acer Aspire V3 BIOS - Lee, Chun-Yi Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-22tty: mxser: Fix build warning introduced by dfc7b837c7f9 (Re: linux-next: ↵Matwey V. Kornilov
build warning after merge of the tty.current tree) Fix build warning at mxser.c introduced by dfc7b837c7f9 (tty: mxser: fix usage of opmode_ioaddr) Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-22spi: topcliff-pch: fix error return code in pch_spi_probe()Wei Yongjun
Fix to return -ENOMEM in the platform_device_alloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-22mm: Fix virt_to_page() warningRalf Baechle
virt_to_page() is typically implemented as a macro containing a cast so that it will accept both pointers and unsigned long without causing a warning. But MIPS virt_to_page() uses virt_to_phys which is a function so passing an unsigned long will cause a warning: CC mm/page_alloc.o mm/page_alloc.c: In function ‘free_reserved_area’: mm/page_alloc.c:5161:3: warning: passing argument 1 of ‘virt_to_phys’ makes pointer from integer without a cast [enabled by default] arch/mips/include/asm/io.h:119:100: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ All others users of virt_to_page() in mm/ are passing a void *. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Eunbong Song <eunb.song@samsung.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-22Merge tag 'mfd-fixes-3.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull mfd fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.10. It's bigger than I would like, most of it is due to the big ab/db8500 merge that went through during the 3.10 merge window. So we have: - Some build fixes for the tps65912 and ab8500 drivers. - A couple of build fixes for the the si476x driver with pre 4.3 gcc compilers. - A few runtime breakage fixes (probe failures or oopses) for the ab8500 and db8500 drivers. - Some sparse or regular gcc warning fixes for the si476x, ab8500 and cros_ec drivers." * tag 'mfd-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: ab8500-sysctrl: Let sysctrl driver work without pdata mfd: db8500-prcmu: Update stored DSI PLL divider value mfd: ab8500-sysctrl: Always enable pm_power_off handler mfd: ab8500-core: Pass GPADC compatible string to MFD core mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning mfd: ab8500-sysctrl: Set sysctrl_dev during probe mfd: ab8500-sysctrl: Fix sparse warning mfd: abx500-core: Fix sparse warning mfd: ab8500: Debugfs code depends on gpadc mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads mfd: cros_ec_spi: Use %z to format pointer differences mfd: si476x: Do not use binary constants mfd: tps65912: Select MFD_CORE
2013-05-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio fixes from Rusty Russell: "A build fix and a uapi exposure fix. The build fix is later than I liked, but my first version broke linux-next due to overzealous header clean." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: fix uapi header Hoist memcpy_fromiovec/memcpy_toiovec into lib/
2013-05-22MIPS: N64: Wire getdents64(2)Aron Xu
As a relatively new ABI, N64 only had getdents syscall while other modern architectures have getdents64. This was noticed when Python 3.3 shifted to the latter one for aarch64. [ralf@linux-mips.org: The history of getdents64 is a little complicated. Commit 1a1d77dd589de5a567fa95e36aa6999c704ceca4 [Merge with 2.4.0-test7.] added N64 getdents(2) to arch/mips64/kernel/scall_64.S as syscall 5213, then dropped again in 578720675c44e54e8aa7c68f6dce59ed37ce3d3b [Overhaul of the 64-bit syscall interface. Now heritage free.] for 2.5.18 in 2002.] Signed-off-by: Aron Xu <aron@debian.org> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22drm/i915: avoid premature DP AUX timeoutsImre Deak
During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-22drm/i915: avoid premature timeouts in __wait_seqno()Imre Deak
At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-22drm/i915: use msecs_to_jiffies_timeout instead of open coding the sameImre Deak
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-22drm/i915: add msecs_to_jiffies_timeout to guarantee minimum durationImre Deak
We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-22kprobes/mips: Fix to check double free of insn slotMasami Hiramatsu
Fix to check double free of insn_slot at arch_remove_kprobe as other arches do. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Maneesh Soni <manesoni@cisco.com> Cc: Victor Kamensky <kamensky@cisco.com> Cc: linux-mips@linux-mips.org Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: yrl.pp-manager.tt@hitachi.com Cc: systemtap@sourceware.org Patchwork: https://patchwork.linux-mips.org/patch/5293/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22cpufreq: arm_big_little_dt: Instantiate as platform_driverViresh Kumar
As multiplatform build is being adopted by more and more ARM platforms, initcall function should be used very carefully. For example, when both arm_big_little_dt and cpufreq-cpu0 drivers are compiled in, arm_big_little_dt driver may try to register even if we had platform device for cpufreq-cpu0 registered. To eliminate this undesired the effect, the patch changes arm_big_little_dt driver to have it instantiated as a platform_driver. Then it will only run on platforms that create the platform_device "arm-bL-cpufreq-dt". Reported-and-tested-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22cpufreq: arm_big_little_dt: Register driver only if DT has valid dataViresh Kumar
If arm_big_little_dt driver is enabled, then it will always try to register with big LITTLE cpufreq core driver. In case DT doesn't have relevant data for cpu nodes, i.e. operating points aren't present, then we should exit early and shouldn't register with big LITTLE cpufreq core driver. Otherwise we will fail continuously from the driver->init() routine. This patch fixes this issue. Reported-and-tested-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22cpufreq / e_powersaver: Fix linker error when ACPI processor is a moduleRafał Bilski
on i386: CONFIG_ACPI_PROCESSOR=m CONFIG_X86_E_POWERSAVER=y drivers/built-in.o: In function `eps_cpu_init.part.8': e_powersaver.c:(.text.unlikely+0x2243): undefined reference to `acpi_processor_register_performance' e_powersaver.c:(.text.unlikely+0x22a2): undefined reference to `acpi_processor_unregister_performance' e_powersaver.c:(.text.unlikely+0x246b): undefined reference to `acpi_processor_get_bios_limit' X86_E_POWERSAVER should also depend on ACPI_PROCESSOR. Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22KVM/MIPS32: Wrap calls to gfn_to_pfn() with srcu_read_lock/unlock()Sanjay Lal
- As suggested by Gleb, wrap calls to gfn_to_pfn() with srcu_read_lock/unlock(). Memory slots should be acccessed from a SRCU read section. - kvm_mips_map_page() now returns an error code to it's callers, instead of calling panic() if it cannot find a mapping for a particular gfn. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-22KVM/MIPS32: Move include/asm/kvm.h => include/uapi/asm/kvm.h since it is a ↵Sanjay Lal
user visible API. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-22kernel: Fix s390 absolute memory access for /dev/memMichael Holzheu
On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-22 01:37:05 +0000