| Age | Commit message (Collapse) | Author |
|---|
|
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new
fb and put the old fb) is not required, as it's taken care by
drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane().
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 674e78acae0d ("drm/amd/display: Add fast path for cursor plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-3-helen.koike@collabora.com
|
|
In the case of async update, modifications are done in place, i.e. in the
current plane state, so the new_state is prepared and the new_state is
cleaned up (instead of the old_state, unlike what happens in a
normal sync update).
To cleanup the old_fb properly, it needs to be placed in the new_state
in the end of async_update, so cleanup call will unreference the old_fb
correctly.
Also, the previous code had a:
plane_state = plane->funcs->atomic_duplicate_state(plane);
...
swap(plane_state, plane->state);
if (plane->state->fb && plane->state->fb != new_state->fb) {
...
}
Which was wrong, as the fb were just assigned to be equal, so this if
statement nevers evaluates to true.
Another details is that the function drm_crtc_vblank_get() can only be
called when vop->is_enabled is true, otherwise it has no effect and
trows a WARN_ON().
Calling drm_atomic_set_fb_for_plane() (which get a referent of the new
fb and pus the old fb) is not required, as it is taken care by
drm_mode_cursor_universal() when calling
drm_atomic_helper_update_plane().
Fixes: 15609559a834 ("drm/rockchip: update cursors asynchronously through atomic.")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-2-helen.koike@collabora.com
|
|
There's no reason to request physically contiguous memory for those
allocations.
[boris: added CC to stable]
Cc: stable@vger.kernel.org
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.
In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:
1. mtk_dsi_encoder_disable()
--> mtk_output_dsi_disable()
--> mtk_dsi_stop(); /* sometimes make vblank timeout in
atomic_disable */
--> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
--> drm_crtc_wait_one_vblank();
...
--> mtk_dsi_ddp_stop()
--> mtk_dsi_poweroff();
mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.
Fixes: 0707632b5bac ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
num_pipes is used for mutex created in mtk_drm_crtc_create(). If we
don't clear num_pipes count, when rebinding driver, the count will
be accumulated. From mtk_disp_mutex_get(), there can only be at most
10 mutex id. Clear this number so it starts from 0 in every rebind.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
shutdown all CRTC when unbinding drm driver.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
Unbinding components (i.e. mtk_dsi and mtk_disp_ovl/rdma/color) will
trigger master(mtk_drm)'s .unbind(), and currently mtk_drm's unbind
won't actually unbind components. During the next bind,
mtk_drm_kms_init() is called, and the components are added back.
.unbind() should call mtk_drm_kms_deinit() to unbind components.
And since component_master_del() in .remove() will trigger .unbind(),
which will also unregister device, it's fine to remove original functions
called here.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.
Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
Some SFP modules do not like reads longer than 16 bytes, so read the
EEPROM in chunks of 16 bytes at a time. This behaviour is not specified
in the SFP MSAs, which specifies:
"The serial interface uses the 2-wire serial CMOS E2PROM protocol
defined for the ATMEL AT24C01A/02/04 family of components."
and
"As long as the SFP+ receives an acknowledge, it shall serially clock
out sequential data words. The sequence is terminated when the host
responds with a NACK and a STOP instead of an acknowledge."
We must avoid breaking a read across a 16-bit quantity in the diagnostic
page, thankfully all 16-bit quantities in that page are naturally
aligned.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sysctl setting bc_forwarding for $rp2 is needed when ping_test_from h2,
otherwise the bc packets from $rp2 won't be forwarded. This patch is to
add this setting for $rp2.
Also, as ping_test_from does grep "$from" only, which could match some
unexpected output, some test case doesn't really work, like:
# ping_test_from $h2 198.51.200.255 198.51.200.2
PING 198.51.200.255 from 198.51.100.2 veth3: 56(84) bytes of data.
64 bytes from 198.51.100.1: icmp_seq=1 ttl=64 time=0.336 ms
When doing grep $form (198.51.200.2), the output could still match.
So change to grep "bytes from $from" instead.
Fixes: 40f98b9af943 ("selftests: add a selftest for directed broadcast forwarding")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
enabled
Should only enable HW RX_2BYTE_OFFSET function in the case NET_IP_ALIGN
equals to 2.
Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Should hw_feature as hardware capability flags to check if hardware LRO
got support.
Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fix for userspace trying to access kernel vaddr space
- HSDK platform DT updates
- Cleanup some build warnings
* tag 'arc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk] Get rid of inappropriate PHY settings
ARC: [plat-hsdk]: Add support of Vivante GPU
ARC: [plat-hsdk]: enable creg-gpio controller
ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node
ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node
ARC: mm: SIGSEGV userspace trying to access kernel virtual memory
ARC: fix build warnings
|
|
Fix ability to set RX descriptor number, the reason - initially
"tx_max_pending" was set incorrectly, but the issue appears after
adding sanity check, so fix is for "sanity" patch.
Fixes: 37e2d99b59c476 ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Herbert Xu pointed out that commit bb73c52bad36 ("rcu: Don't disable
preemption for Tiny and Tree RCU readers") was incorrect in making the
preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT.
If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is
a no-op, but still is a compiler barrier.
And RCU locking still _needs_ that compiler barrier.
It is simply fundamentally not true that RCU locking would be a complete
no-op: we still need to guarantee (for example) that things that can
trap and cause preemption cannot migrate into the RCU locked region.
The way we do that is by making it a barrier.
See for example commit 386afc91144b ("spinlocks and preemption points
need to be at least compiler barriers") from back in 2013 that had
similar issues with spinlocks that become no-ops on UP: they must still
constrain the compiler from moving other operations into the critical
region.
Now, it is true that a lot of RCU operations already use READ_ONCE() and
WRITE_ONCE() (which in practice likely would never be re-ordered wrt
anything remotely interesting), but it is also true that that is not
globally the case, and that it's not even necessarily always possible
(ie bitfields etc).
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers")
Cc: stable@kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 fixes from Greentime Hu:
- fix warning for math-emu
- fix nds32 fpu exception handling
- fix nds32 fpu emulation implementation
* tag 'nds32-for-linux-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: add new emulations for floating point instruction
nds32: Avoid IEX status being incorrectly modified
math-emu: Use statement expressions to fix Wshift-count-overflow warning
|
|
Pull sparc fixes from David Miller:
"Three bug fixes, and TLB flushing one is of particular brown paper bag
quality..."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
mdesc: fix a missing-check bug in get_vdev_port_node_info()
sparc64: Fix regression in non-hypervisor TLB flush xcall
|
|
Pull virtio fixes from Michael Tsirkin:
"Several fixes, some of them for CVEs"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: scsi: add weight support
vhost: vsock: add weight support
vhost_net: fix possible infinite loop
vhost: introduce vhost_exceeds_weight()
virtio: Fix indentation of VIRTIO_MMIO
virtio: add unlikely() to WARN_ON_ONCE()
|
|
The definitions for DSP oops structures were not aligned
correctly to current FW ABI version 3.6.0, leading to
invalid data being printed out to debug logs. Fix the structs
and update related platform code accordingly.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HDA_DEV_ASOC type codec device refcounts are managed differently
from HDA_DEV_LEGACY devices. The refcount is released explicitly
in snd_hdac_ext_bus_device_remove() for ASOC type devices.
So, remove the put_device() call in snd_hda_codec_dev_free()
for such devices to make the refcount balanced. This will prevent
the NULL pointer exception when the codec driver is released
after the card is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previously the structure used bitfields, which do not guarantee bit
ordering.
This change makes sure the order is clearly defined. It also renames
and repurposes the field for general use.
Signed-off-by: Slawomir Blauciak <slawomir.blauciak@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We had a couple of misses with ABI changes, e.g. for Xtensa oops
information and the integration of sound trigger, before we set-up a
formal process to track evolutions.
With this patch, the SOF kernel patches are officially aligned with
the firmware 3.6 level. Changing this level has no impact on existing
users and is fully backwards-compatible.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add soundwire dai type and update ABI version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We missed these two definitions for GDB support and component
notifications, they are defined for the SOF firmware. Since they are
not used by the kernel so far, we can still add them without any ABI
change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This tablet has an incorrect acpi identifier just like
Thinkpad10 tablet, which is why it is trying to load the RT5640 driver
instead of the RT5762 driver. The RT5640 driver, on the other hand, checks
the hardware ID, so no driver are loaded during boot. This fix resolves to
load the RT5672 driver on this tablet during boot. It also provides the
correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I
would like to thank Pierre-Louis Bossart for helping with this patch.
Signed-off-by: Kovács Tamás <kepszlok@zohomail.eu>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The im_boffset field is in units of bytes, whereas XFS_INO_OFFSET
returns a value in units of inodes. Convert the units so that scrub on
a 64k-block filesystem works correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
In the call to regmap_update_bits() for SLOTTYPE, the mask and value
fields are exchanged. Fix this.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In case memory resources for *fw* were successfully allocated,
release them before return.
Addresses-Coverity-ID: 1445499 ("Resource leak")
Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The debugfs interface for accessing DRAM virtual addresses currently
uses the 12 LSBs of a virtual address as an offset.
However, it should use the 20 LSBs in case the device MMU page size is
2MB instead of 4KB.
This patch fixes the offset calculation to be based on the page size.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Depends on:
- https://patchwork.freedesktop.org/series/58976/
- https://patchwork.freedesktop.org/series/59855/
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
As explained in
0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.
That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.
This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.
That results in triple fault shortly after cr3 is switched, and machine
reboots.
Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.
Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add kerneldoc comments to pm_suspend_via_firmware(),
pm_resume_via_firmware() and pm_suspend_via_s2idle()
to explain what they do.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Save RING_HEAD into vgpu reg when vgpu switched out and report
it's value back to guest.
v6: addressed comment for ring head wrap count support. (Zhenyu)
v5: ring head wrap count support.
v4: updated HEAD/TAIL with guest value, not host value. (Yan Zhao)
v3: save RING HEAD/TAIL vgpu reg in save_ring_hw_state. (Zhenyu Wang)
v2: save RING_TAIL as well during vgpu mmio switch to meet ring_is_idle
condition. (Fred Gao)
v1: based on input from Weinan. (Weinan Li)
[zhenyuw: Include this fix for possible future guest kernel that
would utilize RING_HEAD for hangcheck.]
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the
sample period of a running perf_event. Consequently, when calculating
the next event period, the new period will only be considered after the
previous one has overflowed.
This patch changes the calculation of the remaining event ticks so that
they are offset if the period has changed.
See commit 3581fe0ef37c ("ARM: 7556/1: perf: fix updated event period in
response to PERF_EVENT_IOC_PERIOD") for details.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In get_vdev_port_node_info(), 'node_info->vdev_port.name' is allcoated
by kstrdup_const(), and it returns NULL when fails. So
'node_info->vdev_port.name' should be checked.
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of updating by MMIO write, all of the wa regs are initialized by
wa_ctx. From host side, it should make this behavior as expected, add
'F_CMD_ACCESS' flag to these regs and allow access by commands.
[ 123.557608] gvt: vgpu 2: srm access to non-render register (b11c)
[ 123.563728] gvt: vgpu 2: MI_STORE_REGISTER_MEM handler error
[ 123.569409] gvt: vgpu 2: cmd parser error
[ 123.573424] 0x0
[ 123.573425] 0x24
[ 123.578686] gvt: vgpu 2: scan workload error
[ 123.582958] GVT Internal error for the guest
[ 123.587317] Now vgpu 2 will enter failsafe mode.
[ 123.591938] gvt: vgpu 2: failed to submit desc 0
[ 123.596557] gvt: vgpu 2: fail submit workload on ring 0
[ 123.601786] gvt: vgpu 2: fail to emulate MMIO write 00002230 len 4
Acked-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Previously, %g2 would end up with the value PAGE_SIZE, but after the
commit mentioned below it ends up with the value 1 due to being reused
for a different purpose. We need it to be PAGE_SIZE as we use it to step
through pages in our demap loop, otherwise we set different flags in the
low 12 bits of the address written to, thereby doing things other than a
nucleus page flush.
Fixes: a74ad5e660a9 ("sparc64: Handle extremely large kernel TLB range flushes more gracefully.")
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rollover used to use a complex RCU mechanism for assignment, which had
a race condition. The below patch fixed the bug and greatly simplified
the logic.
The feature depends on fanout, but the state is private to the socket.
Fanout_release returns f only when the last member leaves and the
fanout struct is to be freed.
Destroy rollover unconditionally, regardless of fanout state.
Fixes: 57f015f5eccf2 ("packet: fix crash in fanout_demux_rollover()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing a loopback test at copper ports, the serdes loopback
and the phy loopback will fail, because of the adjust link had
not finished, and phy not ready.
Adds sleep between adjust link and test process to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
When non-bridged, non-vlan'ed mv88e6xxx port is moving down, error
message is logged:
failed to kill vid 0081/0 for device eth_cu_1000_4
This is caused by call from __vlan_vid_del() with vin set to zero, over
call chain this results into _mv88e6xxx_port_vlan_del() called with
vid=0, and mv88e6xxx_vtu_get() called from there returns -EINVAL.
On symmetric path moving port up, call goes through
mv88e6xxx_port_vlan_prepare() that calls mv88e6xxx_port_check_hw_vlan()
that returns -EOPNOTSUPP for zero vid.
This patch changes mv88e6xxx_vtu_get() to also return -EOPNOTSUPP for
zero vid, then this error code is explicitly cleared in
dsa_slave_vlan_rx_kill_vid() and error message is no longer logged.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes: a quirk for KVM guests running on certain AMD CPUs, and a
KASAN related build fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
x86/boot: Provide KASAN compatible aliases for string routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"On the kernel side there's a bunch of ring-buffer ordering fixes for a
reproducible bug, plus a PEBS constraints regression fix.
Plus tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two EFI fixes: a quirk for weird systabs, plus add more robust error
handling in the old 1:1 mapping code"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Allow the number of EFI configuration tables entries to be zero
efi/x86/Add missing error handling to old_memmap 1:1 mapping code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull stacktrace fix from Ingo Molnar:
"Fix a stack_trace_save_tsk_reliable() regression"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Unbreak stack_trace_save_tsk_reliable()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX fixes from Greg KH:
"Here are just two small patches, that fix up some found SPDX
identifier issues.
The first patch fixes an error in a previous SPDX fixup patch, that
causes build errors when doing 'make clean' on the tree (the fact that
almost no one noticed it reflects the fact that kernel developers
don't like doing that option very often...)
The second patch fixes up a number of places in the tree where people
mistyped the string "SPDX-License-Identifier". Given that people can
not even type their own name all the time without mistakes, this was
bound to happen, and odds are, we will have to add some type of check
for this to checkpatch.pl to catch this happening in the future.
Both of these have passed testing by 0-day"
* tag 'spdx-5.2-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
treewide: fix typos of SPDX-License-Identifier
crypto: ux500 - fix license comment syntax error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor fix to our IMC PMU code to print a less confusing error
message when the driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling
filter can corrupt PMU state, preventing the PMU from counting
properly.
And finally a fix for a bug in our support for kexec_file_load(),
which prevented loading a kernel and initramfs. Most versions of kexec
don't yet use kexec_file_load().
Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
Bangoria, Thiago Jung Bauermann"
* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
powerpc/perf: Fix MMCRA corruption by bhrb_filter
powerpc/powernv: Return for invalid IMC domain
|
|
Pull KVM fixes from Paolo Bonzini:
"Fixes for PPC and s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
kvm: fix compile on s390 part 2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A memleak fix for the core, two driver bugfixes, as well as fixing
missing file patterns to MAINTAINERS"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: add I2C DT bindings to ARM platforms
MAINTAINERS: add DT bindings to i2c drivers
i2c: synquacer: fix synquacer_i2c_doxfer() return value
i2c: mlxcpld: Fix wrong initialization order in probe
i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr
|
