| Age | Commit message (Collapse) | Author |
|---|
|
For erofs_map_blocks() and erofs_map_blocks_flatmode(), the flags
argument is always EROFS_GET_BLOCKS_RAW. Thus remove the unused flags
parameter for these two functions.
Besides EROFS_GET_BLOCKS_RAW is originally introduced for reading
compressed (raw) data for compressed files. However it's never used
actually and let's remove it now.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209024825.17335-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
As new flags introduced, the corresponding print symbols for trace are
not added accordingly. Add these missing print symbols for these flags.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209024825.17335-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209-kobj_type-erofs-v1-1-078c945e2c4b@weissschuh.net
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Using per-cpu thread pool we can reduce the scheduling latency compared
to workqueue implementation. With this patch scheduling latency and
variation is reduced as per-cpu threads are high priority kthread_workers.
The results were evaluated on arm64 Android devices running 5.10 kernel.
The table below shows resulting improvements of total scheduling latency
for the same app launch benchmark runs with 50 iterations. Scheduling
latency is the latency between when the task (workqueue kworker vs
kthread_worker) became eligible to run to when it actually started
running.
+-------------------------+-----------+----------------+---------+
| | workqueue | kthread_worker | diff |
+-------------------------+-----------+----------------+---------+
| Average (us) | 15253 | 2914 | -80.89% |
| Median (us) | 14001 | 2912 | -79.20% |
| Minimum (us) | 3117 | 1027 | -67.05% |
| Maximum (us) | 30170 | 3805 | -87.39% |
| Standard deviation (us) | 7166 | 359 | |
+-------------------------+-----------+----------------+---------+
Background: Boot times and cold app launch benchmarks are very
important to the Android ecosystem as they directly translate to
responsiveness from user point of view. While EROFS provides
a lot of important features like space savings, we saw some
performance penalty in cold app launch benchmarks in few scenarios.
Analysis showed that the significant variance was coming from the
scheduling cost while decompression cost was more or less the same.
Having per-cpu thread pool we can see from the above table that this
variation is reduced by ~80% on average. This problem was discussed
at LPC 2022. Link to LPC 2022 slides and talk at [1]
[1] https://lpc.events/event/16/contributions/1338/
[ Gao Xiang: At least, we have to add this until WQ_UNBOUND workqueue
issue [2] on many arm64 devices is resolved. ]
[2] https://lore.kernel.org/r/CAJkfWY490-m6wNubkxiTPsW59sfsQs37Wey279LmiRxKt7aQYg@mail.gmail.com
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230208093322.75816-1-hsiangkao@linux.alibaba.com
|
|
Reorder internal.h code so that removing unneeded macros and more.
No logic changes.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-6-hsiangkao@linux.alibaba.com
|
|
The code can be neater without forward declarations. Let's
get rid of z_erofs_do_map_blocks() forward declaration.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-5-hsiangkao@linux.alibaba.com
|
|
Definitions in zdata.h are only used in zdata.c and for internal
use only. No logic changes.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-4-hsiangkao@linux.alibaba.com
|
|
Just open-code the remaining one to simplify the code.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-3-hsiangkao@linux.alibaba.com
|
|
We could just use a boolean in z_erofs_decompressqueue for sync
decompression to simplify the code.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-2-hsiangkao@linux.alibaba.com
|
|
erofs_inode_datablocks() has the only one caller, let's just get
rid of it entirely. No logic changes.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230204093040.97967-1-hsiangkao@linux.alibaba.com
|
|
Actually we could pass in inodes directly to clean up all callers.
Also rename iloc() as erofs_iloc().
Link: https://lore.kernel.org/r/20230114150823.432069-1-xiang@kernel.org
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Since erofsdump is available, no need to keep this debugging
functionality at all.
Also drop a useless comment since it's the VFS behavior.
Link: https://lore.kernel.org/r/20230114125746.399253-1-xiang@kernel.org
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
EROFS actually never uses buffer heads, therefore just get rid of
BH_xxx definitions and linux/buffer_head.h inclusive.
Link: https://lore.kernel.org/r/20230113065226.68801-2-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Move inode hash function into inode.c and simplify erofs_iget().
Link: https://lore.kernel.org/r/20230113065226.68801-1-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
This reverts commit 84d7d462b16dd5f0bf7c7ca9254bf81db2c952a2.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 821e840c08ad83736eced4037cdad864e95e2584.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 178fa7d49815ea8001f43ade37a22072829fd8ab.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit c43332fe028c252a2a28e46be70a530f64fc3c9d as it is not
needed without moving to disk references in the blkg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 3f13ab7c80fdb0ada86a8e3e818960bc1ccbaa59 as a patch
it depends on caused a few problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230214183308.1658775-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround
has 'BUS' style reset, indicating that it does not lose its value on
engine resets. Furthermore, this register is part of the GT forcewake
domain rather than the RENDER domain, so it should not be impacted by
RCS engine resets. As such, we should implement this on the GT
workaround list rather than an engine list.
Bspec: 19219
Fixes: 3551ff928744 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com
(cherry picked from commit 5f21dc07b52eb54a908e66f5d6e05a87bcb5b049)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Recently I encountered one case where I cannot increase the MTU size
directly from 1500 to a much bigger value with XDP enabled if the
server is equipped with IXGBE card, which happened on thousands of
servers in production environment. After applying the current patch,
we can set the maximum MTU size to 3K.
This patch follows the behavior of changing MTU as i40e/ice does.
References:
[1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP")
[2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Add a missing NULL pointer check to the cpufreq drver for Qualcomm
platforms (Manivannan Sadhasivam)"
* tag 'pm-6.2-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-hw: Add missing null pointer check
|
|
Pull kvm fixes from Paolo Bonzini:
"Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling
threads transitions out of C0 state, the other thread gets access to
twice as many entries in the RSB, but unfortunately the predictions of
the now-halted logical processor are not purged. Therefore, the
executing processor could speculatively execute from locations that
the now-halted processor had trained the RSB on.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM
to prevent exiting guest mode when transitioning out of C0 using the
KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change
this behavior. To mitigate the cross-thread return address predictions
bug, a VMM must not be allowed to override the default behavior to
intercept C0 transitions.
These patches introduce a KVM module parameter that, if set, will
prevent the user from disabling the HLT, MWAIT and CSTATE exits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions
KVM: x86: Mitigate the cross-thread return address predictions bug
x86/speculation: Identify processors vulnerable to SMT RSB predictions
|
|
Reportedly, clang cannot do interprocedural analysis:
https://lore.kernel.org/r/20230213-amd64_edac-wsometimes-uninitialized-v1-1-5bde32b89e02@kernel.org
and see that those arguments won't be used uninitialized.
So, yeah, the code's fine even without this. Normally, such a "fix"
won't be applied but that warning gets automatically enabled in -Wall
builds and when CONFIG_WERROR is set in allmodconfig builds, the build
fails.
So shut it up with a minimal fix as this code will see more
reorganization very soon.
[ bp: Write commit message. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/Y%2BqdVHidnrrKvxiD@dev-arch.thelio-3990X
|
|
On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make its audio LEDs and speaker work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214140432.39654-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
of_device_get_match_data() may return NULL, so add a check to prevent
potential null pointer dereference.
Issue reported by Qualcomm's internal static analysis tool.
Fixes: 4f7961706c63 ("cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214035853.31217-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
syzbot reported a RCU stall which is caused by setting up an alarmtimer
with a very small interval and ignoring the signal. The reproducer arms the
alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a
problem per se, but that's an issue when the signal is ignored because then
the timer is immediately rearmed because there is no way to delay that
rearming to the signal delivery path. See posix_timer_fn() and commit
58229a189942 ("posix-timers: Prevent softirq starvation by small intervals
and SIG_IGN") for details.
The reproducer does not set SIG_IGN explicitely, but it sets up the timers
signal with SIGCONT. That has the same effect as explicitely setting
SIG_IGN for a signal as SIGCONT is ignored if there is no handler set and
the task is not ptraced.
The log clearly shows that:
[pid 5102] --- SIGCONT {si_signo=SIGCONT, si_code=SI_TIMER, si_timerid=0, si_overrun=316014, si_int=0, si_ptr=NULL} ---
It works because the tasks are traced and therefore the signal is queued so
the tracer can see it, which delays the restart of the timer to the signal
delivery path. But then the tracer is killed:
[pid 5087] kill(-5102, SIGKILL <unfinished ...>
...
./strace-static-x86_64: Process 5107 detached
and after it's gone the stall can be observed:
syzkaller login: [ 79.439102][ C0] hrtimer: interrupt took 68471 ns
[ 184.460538][ C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
...
[ 184.658237][ C1] rcu: Stack dump where RCU GP kthread last ran:
[ 184.664574][ C1] Sending NMI from CPU 1 to CPUs 0:
[ 184.669821][ C0] NMI backtrace for cpu 0
[ 184.669831][ C0] CPU: 0 PID: 5108 Comm: syz-executor192 Not tainted 6.2.0-rc6-next-20230203-syzkaller #0
...
[ 184.670036][ C0] Call Trace:
[ 184.670041][ C0] <IRQ>
[ 184.670045][ C0] alarmtimer_fired+0x327/0x670
posix_timer_fn() prevents that by checking whether the interval for
timers which have the signal ignored is smaller than a jiffie and
artifically delay it by shifting the next expiry out by a jiffie. That's
accurate vs. the overrun accounting, but slightly inaccurate
vs. timer_gettimer(2).
The comment in that function says what needs to be done and there was a fix
available for the regular userspace induced SIG_IGN mechanism, but that did
not work due to the implicit ignore for SIGCONT and similar signals. This
needs to be worked on, but for now the only available workaround is to do
exactly what posix_timer_fn() does:
Increase the interval of self-rearming timers, which have their signal
ignored, to at least a jiffie.
Interestingly this has been fixed before via commit ff86bf0c65f1
("alarmtimer: Rate limit periodic intervals") already, but that fix got
lost in a later rework.
Reported-by: syzbot+b9564ba6e8e00694511b@syzkaller.appspotmail.com
Fixes: f2c45807d399 ("alarmtimer: Switch over to generic set/get/rearm routine")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87k00q1no2.ffs@tglx
|
|
disabled case")
Commit
90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
broke the use case of running Xen dom0 kernels on machines with an
external disk enclosure attached via USB, see Link tag.
What this commit was originally fixing - SEV-SNP guests on Hyper-V - is
a more specialized situation which has other issues at the moment anyway
so reverting this now and addressing the issue properly later is the
prudent thing to do.
So revert it in time for the 6.2 proper release.
[ bp: Rewrite commit message. ]
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de
|
|
When setting 'snps,force_thresh_dma_mode' DT property, the following
warning is always emitted, regardless the status of force_sf_dma_mode:
dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
Do not print the rather misleading message when DMA store and forward
mode is already disabled.
Fixes: e2a240c7d3bc ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It's not used anywhere anymore, so remove it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There may only be a single DMA mapped entry from multiple physical
segments, which means we don't allocate a separte SGL list. Check the
number of allocations prior to know if we need to free something.
Freeing a single list allocation is the same for both PRP and SGL
usages, so we don't need to check the use_sgl flag anymore.
Fixes: 01df742d8c5c0 ("nvme-pci: remove SGL segment descriptors")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
|
|
Don't mix NULL and ERR_PTR returns.
Fixes: 2e87570be9d2 ("nvme-pci: factor out a nvme_pci_alloc_dev helper")
Signed-off-by: Irvin Cote <irvin.cote@insa-lyon.fr>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Set the DMA mask before calling dma_addressing_limited, which depends on it.
Note that this stop checking the return value of dma_set_mask_and_coherent
as this function can only fail for masks < 32-bit.
Fixes: 3f30a79c2e2c ("nvme-pci: set constant paramters in nvme_pci_alloc_ctrl")
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Michael Kelley <mikelley@microsoft.com>
|
|
The tc action act_ctinfo was using shared stats, fix it to use percpu stats
since bstats_update() must be called with locks or with a percpu pointer argument.
tdc results:
1..12
ok 1 c826 - Add ctinfo action with default setting
ok 2 0286 - Add ctinfo action with dscp
ok 3 4938 - Add ctinfo action with valid cpmark and zone
ok 4 7593 - Add ctinfo action with drop control
ok 5 2961 - Replace ctinfo action zone and action control
ok 6 e567 - Delete ctinfo action with valid index
ok 7 6a91 - Delete ctinfo action with invalid index
ok 8 5232 - List ctinfo actions
ok 9 7702 - Flush ctinfo actions
ok 10 3201 - Add ctinfo action with duplicate index
ok 11 8295 - Add ctinfo action with invalid index
ok 12 3964 - Replace ctinfo action with invalid goto_chain control
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20230210200824.444856-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
So far changing the period by just setting new period values while
running did not work.
The order as indicated by the publicly available reference manual of the i.MX8MP [1]
indicates a sequence:
* initiate the programming sequence
* set the values for PPS period and start time
* start the pulse train generation.
This is currently not used in dwmac5_flex_pps_config(), which instead does:
* initiate the programming sequence and immediately start the pulse train generation
* set the values for PPS period and start time
This caused the period values written not to take effect until the FlexPPS output was
disabled and re-enabled again.
This patch fix the order and allows the period to be set immediately.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM
Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support")
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a slew of kernel-doc warnings in pata_octeon_cf.c by changing
all "/**" comments to "/*" since they are not in kernel-doc format.
Fixes: 3c929c6f5aa7 ("libata: New driver for OCTEON SOC Compact Flash interface (v7).")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202302101722.5O56RClE-lkp@intel.com/
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables
S0ix to work out of the box. Otherwise this isn't working unless the
user manually sets /sys/class/scsi_host/*/link_power_management_policy.
Intel lists a total of 4 SATA controller IDs in [1] for those mobile
PCHs. This commit just adds the "AHCI" variant since I only tested
those.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/631119
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Samsung MZ7LH drives are spewing messages like this in to dmesg with AMD
SATA controllers:
ata1.00: exception Emask 0x0 SAct 0x7e0000 SErr 0x0 action 0x6 frozen
ata1.00: failed command: SEND FPDMA QUEUED
ata1.00: cmd 64/01:88:00:00:00/00:00:00:00:00/a0 tag 17 ncq dma 512 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
Since this was seen previously with SSD 840 EVO drives in
https://bugzilla.kernel.org/show_bug.cgi?id=203475 let's add the same
fix for these drives as the EVOs have, since they likely have very
similar firmwares.
Signed-off-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
On JZ4760 and JZ4760B, SD cards fail to run if the maximum clock
rate is set to 50 MHz, even though the controller officially does
support it.
Until the actual bug is found and fixed, limit the maximum clock rate to
24 MHz.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131210229.68129-1-paul@crapouillou.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If mmc_add_host() fails, it doesn't need to call mmc_remove_host(),
or it will cause null-ptr-deref, because of deleting a not added
device in mmc_remove_host().
To fix this, goto label 'fail_glue_init', if mmc_add_host() fails,
and change the label 'fail_add_host' to 'fail_gpiod_request'.
Fixes: 15a0580ced08 ("mmc_spi host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230131013835.3564011-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().
To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().
In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.
Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.
unreferenced object 0xffff888112514000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s)
hex dump (first 32 bytes):
00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X......
10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core]
[<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core]
[<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]
unreferenced object 0xffff888112511000 (size 2048):
comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s)
hex dump (first 32 bytes):
00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff .@Q......X......
10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q.....
backtrace:
[<000000009e5931da>] kmalloc_trace+0x21/0x110
[<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core]
[<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core]
[<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core]
Fixes: 3d10a1ba0d37 ("sdio: fix reference counting in sdio_remove_func()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230130125808.3471254-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.
Fixes: 066ecde6d826 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
qcom,rpmcc bindings expect RPM clock controller to be named generic
"clock-controller":
rpm-glink: rpm-requests: 'qcom,rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-3-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-2-krzysztof.kozlowski@linaro.org
|
|
Bindings expect (and most of DTS use) the RPM G-Link node name to be
"rpm-requests".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org
|
|
Enable the pinctrl, GCC clock and interconnect drivers in order to allow
booting SA8775P boards. The drivers need to be built-in for QUPv3 and
subsequently UART console to work.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209103531.469809-1-brgl@bgdev.pl
|
|
The interconnect property is already present in the qce node, which
is the consumer of the cryptobam, so no need for an interconnect property
as documented by the bindings.
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Suggested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209-topic-sm8550-upstream-cryptobam-remove-interconnect-v1-1-84587c7bad0f@linaro.org
|
