| Age | Commit message (Collapse) | Author |
|---|
|
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper for setting up the special_bvec instead of open coding it
in three place, and use the new bvec_set_page helper to initialize
special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A small wrapper around bvec_set_page for callers that have a virtual
address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A smaller wrapper around bvec_set_page that takes a folio instead.
There are only two potential users for this in the tree, but the number
will grow in the future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to initialize a bvec based of a page pointer. This will help
removing various open code bvec initializations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cgroup information only makes sense on a live gendisk that allows
file system I/O (which includes the raw block device). So move over
the cgroup related members.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a gendisk to blkg_lookup and use that to find the match as part
of phasing out usage of the request_queue in the blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to the request_queue here, pass a gendisk and extract the
node ids from that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for storing the blkcg information in the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is what about half of the users already want, and it's only going to
grow more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These op vectors are constant, so mark them const.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch to passing a gendisk, and make rq_qos_add initialize all required
fields and drop the not required q argument from rq_qos_del.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These two functions are rather larger and not in a fast path, so move
them out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
wbt_queue_depth_changed just updates a field and calls another function.
Open code it in wbt_init, so that the local queue variable can be used
instead of the one stored in the rq_qos. This will allow delaying that
rq_qos->queue assignment in a subsequent patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A large part of blk-wbt.h is only used in blk-wbt.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a gendisk to wbt_init to prepare for phasing out usage of the
request_queue in the blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a gendisk to wbt_enable_default and wbt_disable_default to
prepare for phasing out usage of the request_queue in the blk-cgroup
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch from a request_queue pointer and reference to a gendisk once
for the throttle information in struct task_struct.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Link: https://lore.kernel.org/r/20230203150400.3199230-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently each blkcg_gq holds a request_queue reference, which is what
is used in the policies. But a lot of these interfaces will move over to
use a gendisk, so store a disk in struct blkcg_gq and hold a reference to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdi_dev_name already performs the same check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to delay freeing a blkg to a workqueue when freeing it
after an initialization failure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unwind only the previous initialization steps that happened in blkg_alloc
using goto based unwinding. This avoids the need for the !queue special
case in blkg_free and thus ensures that any blkg seens outside of
blkg_alloc is always fully constructed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no need to initialize the cgroup code before the disk is marked
live. Moving the cgroup initialization earlier will help to have a
fully initialized struct device in the gendisk for the cgroup code to
use in the future. Similarly tear the cgroup information down in
del_gendisk to be symmetric and because none of the cgroup tracking is
needed once non-passthrough I/O stops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_throtl_stat_add is called from blk_stat_add explicitly, unlike the
other stats that go through q->stats->callbacks. To prepare for cgroup
data moving to the gendisk, ensure blk_throtl_stat_add is only called
for the plain READ and WRITE commands that it actually handles internally,
as blk_stat_add can also be called for passthrough commands on queues that
do not have a gendisk associated with them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203150400.3199230-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
zero-extended 'old' value
__generic_cmpxchg_local takes unsigned long old/new arguments which
might end up being up-cast from smaller signed types (which will
sign-extend). The loaded compare value must be compared against a
truncated smaller type, so down-cast appropriately for each size.
The issue is apparent on 64-bit machines with code, such as
atomic_dec_unless_positive(), that sign-extends from int.
64-bit machines generally don't use the generic cmpxchg but
development/early ports might make use of it, so make it correct.
Signed-off-by: Matt Evans <mev@rivosinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.
This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
When vdosys1 was initially added, it was incorrectly assumed to be
compatible with vdosys0, and thus both had the same mt8195-mmsys
compatible attached.
This has since been corrected in commit b237efd47df7 ("dt-bindings:
arm: mediatek: mmsys: change compatible for MT8195") and commit
82219cfbef18 ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible
for MT8195"). The device tree needs to be fixed as well, otherwise
the vdosys1 block fails to work, and causes its dependent power domain
controller to not work either.
Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1".
While at it, also add the new "mediatek,mt8195-vdosys0" compatible to
vdosys0.
Fixes: 6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230202104014.2931517-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes to adapt to correct binding behaviour and fixes for devices on some boards
Most notably may be the adaption of lower thermal limits for the pinephone
pro, where the original hiher ones could result in (possibly permanent)
display issues.
* tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 6.3 (part 1)
Do not use anymore "marvell,armada3710" compatible string for the
Armada 3720 boards.
* tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Fix compatible strings for Armada 3720 boards
Link: https://lore.kernel.org/r/87zg9w9j6l.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 6.3 (part 1)
Fix errors reported by dtbs_check on dove boards
* tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: dove.dtsi: Move ethphy to fix schema error
Link: https://lore.kernel.org/r/87357oaxs0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v6.3, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add following peripherals support on stm32mp13:
i2s, SAI, SPDIFRX, DFSDM, Timers
- Add timers support on stm32mp135f-dk board.
- Add decicated BSEC compatible on STM32MP13.
- Rename sound card on STM32MP15 DKx.
- Fix yaml validation issues.
* tag 'stm32-dt-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix compatible for BSEC on STM32MP13
ARM: dts: stm32: Update part number NVMEM description on stm32mp131
ARM: dts: stm32: Use new media bus type macros
ARM: dts: stm32: Fix User button on stm32mp135f-dk
ARM: dts: stm32: add timers support on stm32mp135f-dk
ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk
ARM: dts: stm32: add timers support on stm32mp131
ARM: dts: stm32: add dfsdm node on stm32mp131
ARM: dts: stm32: add spdifrx node on stm32mp131
ARM: dts: stm32: add sai nodes on stm32mp131
ARM: dts: stm32: add i2s nodes on stm32mp131
ARM: dts: stm32: Remove the pins-are-numbered property
ARM: dts: stm32: rename sound card on stm32mp15xx-dkx
ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
Link: https://lore.kernel.org/r/3e815504-e85e-cbd3-6e6d-4e5a7aa7469a@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Two new 32bit SoC were added, the rv1126 and rk3128.
New boards are thr rk3128-eval-board, and a number of rv1126-based compute
modules from Edgeble AI.
Also included are some dt-binding improvements with relevant Acks from
maintainers when the changes touch these areas.
* tag 'v6.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: phy: rename phy-rockchip-inno-usb2.yaml
dt-bindings: soc: rockchip: grf: add rockchip,rk3288-dp-phy.yaml
dt-bindings: phy: rockchip: convert rockchip-dp-phy.txt to yaml
ARM: dts: rockchip: Enable Ethernet on rv1126 Neu2-IO
ARM: dts: rockchip: Add Ethernet GMAC node for RV1126
ARM: dts: rockchip: Add ethernet rgmiim1 pin-control for rv1126
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6
ARM: dts: rockchip: add brcmf node to rk3066a-mk808
ARM: dts: rockchip: add space between label and nodename nfc pinctrl on rk3128
ARM: dts: rockchip: add rk3128-evb
ARM: dts: rockchip: add rk3128 soc dtsi
dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
ARM: dts: rockchip: Add Edgeble Neural Compute Module 2(Neu2) IO board
ARM: dts: rockchip: Add Edgeble RV1126 Neural Compute Module 2(Neu2)
dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 2
dt-bindings: vendor-prefixes: Add Edgeble AI Technologies Pvt. Ltd.
ARM: dts: rockchip: Add Rockchip RV1126 SoC
ARM: dts: rockchip: Add Rockchip RV1126 pinctrl
dt-bindings: arm: rockchip: Add pmu compatible for rv1126
Link: https://lore.kernel.org/r/5651506.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New SoC supported is the rk3588.
New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.
A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.
As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.
* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Correct the model name for Radxa E25
arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
arm64: dts: rockchip: Fix compatible for Radxa CM3
arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
arm64: dts: rockchip: add display to RG503
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
dt-bindings: arm: rockchip: Add Radxa Compute Module 3
arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
arm64: dts: rockchip: fix hdmi cec on rock-3a
arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
...
Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt7986:
- add USB host support
- add support for mmc, pcie
- add support for Bananpi R3
mt8173:
- switch to SMC watchdog for Acer Chromebook R13
- move panel under aux bus
mt8183:
- support detachable keyboards on kukui based Chromebooks
- describe 13 MHz clock correctly
- complete CPU cache information
mt8186:
- Add pm-domains, iommu, dsi
- describe 13 MHz clock correctly
- complete CPU cache information
- add crypto support for the eMMC
- add audio controler, DPI and ADSP mailbox support
- describe CPUs as a single cluster
mt8192:
- describe 13 MHz clock correctly
- complete CPU cache information
- enable display regulators, backlight, internal display and audio on
Acer Chromebook 514
- describe CPUs as a single cluster
mt8195:
- Add power domain to t-phy
- describe 13 MHz clock correctly
- complete CPU cache information
- enable audio for Acer Chromebook Spin 513
- add ethernet support for the demo board
- add JPG enconder and decoder device
- describe CPUs as a single cluster
Smaller changes for mt6795, mt7622, mt8516 and mt6358.
* tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits)
arm64: dts: mediatek: mt8516: Fix the watchdog node name
arm64: dts: mediatek: mt7986: Fix watchdog compatible
arm64: dts: mediatek: mt8195: Fix watchdog compatible
arm64: dts: mediatek: mt8186: Fix watchdog compatible
arm64: dts: mt8173-elm: Switch to SMC watchdog
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
arm64: dts: mt8192: Change idle states names to reflect actual function
arm64: dts: mt8186: Change idle states names to reflect actual function
arm64: dts: mt8195: Change idle states names to reflect actual function
arm64: dts: mt8186: Fix CPU map for single-cluster SoC
arm64: dts: mt8192: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: add jpeg decode device node
arm64: dts: mt8195: add jpeg encode device node
arm64: dts: mediatek: mt8183: drop double interrupts
arm64: dts: mediatek: mt7622: drop serial clock-names
arm64: dts: mt8195: Add efuse node to mt8195
arm64: dts: mt8183: jacuzzi: Move panel under aux-bus
arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus
arm64: dts: mt8195: Add Ethernet controller
...
Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
Clean ups only:
- deleting unsused pins-are-numbered property
- not existing second IRQ
* tag 'v6.2-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: mediatek: Remove pins-are-numbered property
arm: dts: mt7629: Remove extra interrupt from timer node
Link: https://lore.kernel.org/r/17aee808-1f3f-fe75-68d4-adb71915e5cb@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the STMicroelectronics NVMEM drivers used on
STM32 MPU, STM32MP15x and STM32MP13x, to access OTPs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230202130040.25233-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.
Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1be6c ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When running kfence_test, I found some testcases failed like this:
# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read
The corresponding call-trace is:
BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84
Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit 6a00ef449370 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).
With this patch, the call-trace will be:
BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e
Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
test_out_of_bounds_read+0x88/0x19e
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
Fixes: 6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-02-01:
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202042309.24144-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixes for potential use-after-free and double-free (Rob)
- GuC locking and refcount fixes (John)
- Display's reference clock value fix (Chaitanya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9u5pHjOYcxzS5Z7@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for a non-unique CEC adapter name registration in vc4, a
regression breaking the display in ssd130x, a signaling bit issue in
dma-fence, a couple of fixes in nouveau for Turing and Ampere, and a
disable fix for the boe-tv101wum-nl6 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202085724.pz22m7bmei3wyuzp@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"Fix device probe issues with some combination of adapters & devices
that do not report a current link speed, leading to device probe
failures if a link speed was not previously reported and saved (me)"
* tag 'ata-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Fix sata_down_spd_limit() when no link speed is reported
|
|
msi-controller property
Fix typo functionnality -> functionality.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Link: https://lore.kernel.org/r/20230130234335.13952-1-prabhakar.csengg@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The tracked files should not be ignored.
Fixes: 44ec8b20d1e9 ("dt-bindings: Add running yamllint to dt_binding_check")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230127150225.18148-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since Linux 5.19 this error is observed:
sysfs: cannot create duplicate filename '/devices/platform/of-display'
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
|
