summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-31rsi: remove redundant flash_content variableSiva Rebbagondla
while cleaning up the driver, observed that flash_content pointer is not necessary in rsi_load_firmware(). Instead of this, driver can use 'fw_entry->data' directly.Hence, removed redundant flash_content pointer. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31rsi: remove redundant device idsSiva Rebbagondla
Removing redundant device id's from both usb and sdio idtables, as rsi driver currently supporting only one module(RS9113). Also, replaced ids with specific defines. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31rsi: optimize virtual interfacesSiva Rebbagondla
Due to multiple calls of add interface routine, vif is getting duplicated and at certain instance, we are out of vifs, causing the driver to behave abnormal. Fix: Every vif has a unique mac-id, when we got a vif with same mac-id as the previous id's, we will override the respective vif. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31rsi: fix for WoWLAN wakeup in security mode.Siva Rebbagondla
System is unable to wake-up through magic-packet in secured connections. Because key descriptor is getting corrupted and firmware is unable to decrypt the magic packet. Fixed the issue by properly preparing it before sending it to firmware. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31rsi: fix for 40MHZ connection issue.Ganapathi Raju
Radio capabilities packet is not prepared properly for 40MHZ case, ppe_ack_rate is a two byte variable which is initialized wrongly, hence we are unable to connect, resolved by assigning it properly. Signed-off-by: Ganapathi Raju <ganapathi.kondraju@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31rsi: fix for low throughput issueSiva Rebbagondla
observed low throughput rates during verification. This is because, QoS enable flag is overridden by sequence number in the data descriptor frame. Hence, added the fix for same. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: Fix skipped vendor specific IEsRoman Stratiienko
Mwifiex firmware inserts only Microsoft information element Allow other vendor specific IEs to pass from userspace Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: use atomic bitops to represent adapter status variablesGanapathi Bhat
Driver is using boolean variables to maintain vairous status information of adapter. These status variables are accessed by multiple threads and there is a possibility of a race. To avoid this, convert these variables to a set of bitops flags, to be operated atomically. Below variables of mwifiex_adapter are converted to bitop flags: surprise_removed is_cmd_timedout is_suspended is_hs_configured hs_enabling Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: restructure rx_reorder_tbl_lock usageGanapathi Bhat
Driver must ensure that whenever it holds a pointer to the list entry mwifiex_rx_reorder_tbl, it must protect the same with rx_reorder_tbl_lock. At present there are many places where driver does not ensure this. To cover all cases, spinlocks in below funcions are moved out and made sure that the caller will hold the spinlock: mwifiex_11n_dispatch_pkt_until_start_win() mwifiex_11n_scan_and_dispatch() mwifiex_del_rx_reorder_entry() mwifiex_11n_get_rx_reorder_tbl() mwifiex_11n_find_last_seq_num() Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: replace rx_pkt_lock by rx_reorder_tbl_lockGanapathi Bhat
At present driver spinlock protects iteration of list rx_reorder_tbl_ptr with rx_reorder_tbl_lock. To protect the individual items in this list, it uses rx_pkt_lock. But, we can use a single rx_reorder_tbl_lock for both purposes. This patch replaces rx_pkt_lock by rx_reorder_tbl_lock. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31Merge tag 'perf-urgent-for-mingo-4.18-20180730' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Update the tools copy of several files, including perf_event.h, powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's memcpy_64.s (used in 'perf bench mem'), silencing the respective warnings during the perf tools build. - Fix the build on the alpine:edge distro. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-31perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devicesKan Liang
Masayoshi Mizuma reported that a warning message is shown while a CPU is hot-removed on Broadwell servers: WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988 uncore_pci_remove+0x10b/0x150 Call Trace: pci_device_remove+0x42/0xd0 device_release_driver_internal+0x148/0x220 pci_stop_bus_device+0x76/0xa0 pci_stop_root_bus+0x44/0x60 acpi_pci_root_remove+0x1f/0x80 acpi_bus_trim+0x57/0x90 acpi_bus_trim+0x2e/0x90 acpi_device_hotplug+0x2bc/0x4b0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x174/0x3a0 worker_thread+0x4c/0x3d0 kthread+0xf8/0x130 This bug was introduced by: commit 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs") The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well. To fix the conflict, the hardcoded index needs to be cleaned up: - introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2 filter" on Broadwell, - increase UNCORE_EXTRA_PCI_DEV_MAX by one, - clean up the hardcoded index. Debugged-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: msys.mizuma@gmail.com Cc: stable@vger.kernel.org Fixes: 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs") Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several smallish fixes, I don't think any of this requires another -rc but I'll leave that up to you: 1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric Dumazet. 2) Route leak in xfrm_lookup_route(), from Tommi Rantala. 3) Premature poll() returns in AF_XDP, from Björn Töpel. 4) devlink leak in netdevsim, from Jakub Kicinski. 5) Don't BUG_ON in fib_compute_spec_dst, the condition can legitimately happen. From Lorenzo Bianconi. 6) Fix some spectre v1 gadgets in generic socket code, from Jeremy Cline. 7) Don't allow user to bind to out of range multicast groups, from Dmitry Safonov with a follow-up by Dmitry Safonov. 8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) netlink: Don't shift with UB on nlk->ngroups net/ipv6: fix metrics leak xen-netfront: wait xenbus state change when load module manually can: ems_usb: Fix memory leak on ems_usb_disconnect() openvswitch: meter: Fix setting meter id for new entries netlink: Do not subscribe to non-existent groups NET: stmmac: align DMA stuff to largest cache line length tcp_bbr: fix bw probing to raise in-flight data for very small BDPs net: socket: Fix potential spectre v1 gadget in sock_is_registered net: socket: fix potential spectre v1 gadget in socketcall net: mdio-mux: bcm-iproc: fix wrong getter and setter pair ipv4: remove BUG_ON() from fib_compute_spec_dst enic: handle mtu change for vf properly net: lan78xx: fix rx handling before first packet is send nfp: flower: fix port metadata conversion bug bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog() bpf: fix bpf_skb_load_bytes_relative pkt length check perf build: Build error in libbpf missing initialization net: ena: Fix use of uninitialized DMA address bits field bpf: btf: Use exact btf value_size match in map_check_btf() ...
2018-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Some small __init annotation and build fixes from Stephen Rostedt and Thomas Petazzoni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: use asm-generic version of msi.h sparc: move MSI related definitions to where they are used sparc/time: Add missing __init to init_tick_ops()
2018-07-30squashfs: more metadata hardeningLinus Torvalds
Anatoly reports another squashfs fuzzing issue, where the decompression parameters themselves are in a compressed block. This causes squashfs_read_data() to be called in order to read the decompression options before the decompression stream having been set up, making squashfs go sideways. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Acked-by: Phillip Lougher <phillip.lougher@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-31net: xsk: don't return frames via the allocator on errorJakub Kicinski
xdp_return_buff() is used when frame has been successfully handled (transmitted) or if an error occurred during delayed processing and there is no way to report it back to xdp_do_redirect(). In case of __xsk_rcv_zc() error is propagated all the way back to the driver, so there is no need to call xdp_return_buff(). Driver will recycle the frame anyway after seeing that error happened. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-31tools/bpftool: fix a percpu_array map dump problemYonghong Song
I hit the following problem when I tried to use bpftool to dump a percpu array. $ sudo ./bpftool map show 61: percpu_array name stub flags 0x0 key 4B value 4B max_entries 1 memlock 4096B ... $ sudo ./bpftool map dump id 61 bpftool: malloc.c:2406: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || \ ((unsigned long) (old_size) >= MINSIZE && \ prev_inuse (old_top) && \ ((unsigned long) old_end & (pagesize - 1)) == 0)' failed. Aborted Further debugging revealed that this is due to miscommunication between bpftool and kernel. For example, for the above percpu_array with value size of 4B. The map info returned to user space has value size of 4B. In bpftool, the values array for lookup is allocated like: info->value_size * get_possible_cpus() = 4 * get_possible_cpus() In kernel (kernel/bpf/syscall.c), the values array size is rounded up to multiple of 8. round_up(map->value_size, 8) * num_possible_cpus() = 8 * num_possible_cpus() So when kernel copies the values to user buffer, the kernel will overwrite beyond user buffer boundary. This patch fixed the issue by allocating and stepping through percpu map value array properly in bpftool. Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-30audit: fix potential null dereference 'context->module.name'Yi Wang
The variable 'context->module.name' may be null pointer when kmalloc return null, so it's better to check it before using to avoid null dereference. Another one more thing this patch does is using kstrdup instead of (kmalloc + strcpy), and signal a lost record via audit_log_lost. Cc: stable@vger.kernel.org # 4.11 Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-07-30sparc: use asm-generic version of msi.hThomas Petazzoni
This is necessary to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with: In file included from drivers//ata/ahci.c:45:0: >> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*msi_finish)(msi_alloc_info_t *arg, int retval); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*set_desc)(msi_alloc_info_t *arg, ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int virq, int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30sparc: move MSI related definitions to where they are usedThomas Petazzoni
The definitions in arch/sparc/include/asm/msi.h are only used in arch/sparc/mm/srmmu.c, so it makes sense to have them in the C file directly. In addition, having a custom arch/sparc/include/asm/msi.h prevents from using the asm-generic version of this header, which is necessary to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30sparc/time: Add missing __init to init_tick_ops()Steven Rostedt (VMware)
Code that was added to force gcc not to inline any function that isn't explicitly declared as inline uncovered that init_tick_ops() isn't marked as "__init". It is only called by __init functions and more importantly it too calls an __init function which would require it to be __init as well. Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30netlink: Don't shift with UB on nlk->ngroupsDmitry Safonov
On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d4237c4 ("netlink: Do not subscribe to non-existent groups"). Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30hv_netvsc: Add per-cpu ethtool stats for netvscYidong Ren
This patch implements following ethtool stats fields for netvsc: cpu<n>_tx/rx_packets/bytes cpu<n>_vf_tx/rx_packets/bytes Corresponding per-cpu counters already exist in current code. Exposing these counters will help troubleshooting performance issues. for_each_present_cpu() was used instead of for_each_possible_cpu(). for_each_possible_cpu() would create very long and useless output. It is still being used for internal buffer, but not for ethtool output. There could be an overflow if cpu was added between ethtool call netvsc_get_sset_count() and netvsc_get_ethtool_stats() and netvsc_get_strings(). (still safe if cpu was removed) ethtool makes these three function calls separately. As long as we use ethtool, I can't see any clean solution. Currently and in foreseeable short term, Hyper-V doesn't support cpu hot-plug. Plus, ethtool is for admin use. Unlikely the admin would perform such combo operations. Changes in v2: - Remove cpp style comment - Resubmit after freeze Changes in v3: - Reimplemented with kvmalloc instead of alloc_percpu Changes in v4: - Fixed inconsistent array size - Use kvmalloc_array instead of kvmalloc Signed-off-by: Yidong Ren <yidren@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30Merge tag 'linux-can-fixes-for-4.18-20180730' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-07-30 this is a pull request of one patch for net/master. The patch by Anton Vasilyev and the Linux Driver Verification project fixes a memory leak in the ems_usb driver's disconnect function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - a build race fix - a Xen entry fix - a TSC_DEADLINE quirk future-proofing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix if_changed build flip/flop bug x86/entry/64: Remove %ebx handling from error_entry/exit x86/apic: Future-proof the TSC_DEADLINE quirk for SKX
2018-07-30Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: - a deadline scheduler related bug fix which triggered a kernel warning - an RT_RUNTIME_SHARE fix - a stop_machine preemption fix - a potential NULL dereference fix in sched_domain_debug_one()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE sched/deadline: Update rq_clock of later_rq when pushing a task stop_machine: Disable preemption after queueing stopper threads sched/topology: Check variable group before dereferencing it
2018-07-30arc: fix type warnings in arc/mm/cache.cRandy Dunlap
Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30arc: fix build errors in arc/include/asm/delay.hRandy Dunlap
Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add <asm-generic/types.h> for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30arc: [plat-eznps] fix printk warning in arc/plat-eznps/mtm.cRandy Dunlap
Fix printk format warning in arch/arc/plat-eznps/mtm.c: In file included from ../include/linux/printk.h:7, from ../include/linux/kernel.h:14, from ../include/linux/list.h:9, from ../include/linux/smp.h:12, from ../arch/arc/plat-eznps/mtm.c:17: ../arch/arc/plat-eznps/mtm.c: In function 'set_mtm_hs_ctr': ../include/linux/kern_levels.h:5:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long int' [-Wformat=] #define KERN_SOH "\001" /* ASCII Start Of Header */ ^~~~~~ ../include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH' #define KERN_ERR KERN_SOH "3" /* error conditions */ ^~~~~~~~ ../include/linux/printk.h:308:9: note: in expansion of macro 'KERN_ERR' printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~ ../arch/arc/plat-eznps/mtm.c:166:3: note: in expansion of macro 'pr_err' pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ^~~~~~ ../arch/arc/plat-eznps/mtm.c:166:40: note: format string is defined here pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ~^ %ld The hs_ctr variable can just be int instead of long, so also change kstrtol() to kstrtoint() and leave the format string as %d. Also add 2 header files since they are used in mtm.c and we prefer not to depend on accidental/indirect #includes. Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi <oferle@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30arc: [plat-eznps] fix data type errors in platform headersRandy Dunlap
Add <linux/types.h> to fix build errors. Both ctop.h and <soc/nps/common.h> use u32 types and cause many errors. Examples: ../include/soc/nps/common.h:71:4: error: unknown type name 'u32' u32 __reserved:20, cluster:4, core:4, thread:4; ../include/soc/nps/common.h:76:3: error: unknown type name 'u32' u32 value; ../include/soc/nps/common.h:124:4: error: unknown type name 'u32' u32 base:8, cl_x:4, cl_y:4, ../include/soc/nps/common.h:127:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32' u32 gen:1, gdis:1, clk_gate_dis:1, asb:1, ../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32' u32 csa:22, dmsid:6, __reserved:3, cs:1; ../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32' u32 value; Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi <oferle@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - AMD IBS data corruptor fix (uncovered by UBSAN) - an Intel PEBS entry unwind error fix - a HW-tracing crash fix - a MAINTAINERS update" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix crash when using HW tracing kernel filters perf/x86/intel: Fix unwind errors from PEBS entries (mk-II) MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer perf/x86/amd/ibs: Don't access non-started event
2018-07-30Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code i2c/mux, locking/core: Annotate the nested rt_mutex usage locking/rtmutex: Allow specifying a subclass for nested locking
2018-07-30Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "An UEFI variables fix for SEV guests" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Access EFI MMIO data as unencrypted when SEV is active
2018-07-30ARC: [plat-eznps] Add missing struct nps_host_reg_aux_dpcOfer Levi
Fixing compilation issue caused by missing struct nps_host_reg_aux_dpc definition. Fixes: 3f9cd874dcc87 ("ARC: [plat-eznps] avoid toggling of DPC register") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ofer Levi <oferle@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30Merge branch 'selftests-mirror-to-gretap-with-team'David S. Miller
Petr Machata says: ==================== A test for mirror-to-gretap with team in UL packet path This patchset adds a test for "tc action mirred mirror" where the mirrored-to device is a gretap, and underlay path contains a team device. In patch #1 require_command() is added, which should henceforth be used to declare dependence on a certain tool. In patch #2, two new functions, team_create() and team_destroy(), are added to lib.sh. The newly-added test uses arping, which isn't necessarily available. Therefore patch #3 introduces $ARPING, and a preexisting test is fixed to require_command $ARPING. In patches #4 and #5, two new tests are added. In both cases, a team device is on egress path of a mirrored packet in a mirror-to-gretap scenario. In the first one, the team device is in loadbalance mode, in the second one it's in lacp mode. (The difference in modes necessitates a different testing strategy, hence two test cases instead of just parameterizing one.) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: Test mirror-to-gretap w/ UL team LACPPetr Machata
This tests mirror-to-gretap when an underlay packet path includes a team device which is not in loadbalance mode, but in LACP mode. The test manipulates LAG membership to achieve changes in txability, thus making sure that a driver that offloads mirror-to-gretap doesn't just consider upness of a device. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: Test mirror-to-gretap w/ UL teamPetr Machata
Test for "tc action mirred egress mirror" that mirrors to gretap when the underlay route points at a VLAN-aware bridge (802.1q), and the traffic egresses the bridge through a team device. Test upping and downing individual team device slaves and verify the traffic flows as expected. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: Introduce $ARPINGPetr Machata
Instead of relying on "arping" being installed everywhere under that name, introduce a variable $ARPING like the other tools do. Convert an existing test, mirror_gre_vlan_bridge_1q.sh to require_command $ARPING and then invoke arping through the variable. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: lib: Support team devicesPetr Machata
Add team_create() and team_destroy() to manage team netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30selftests: forwarding: lib: Add require_command()Petr Machata
The logic for testing whether a certain command is available is used several times in the current code base. The tests in follow-up patches add more requirements like that. Therefore extract the logic into a named function, require_command(), that can be used directly from lib.sh as well as from any test that wishes to declare dependence on some command. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30ARC: add SMP_CACHE_BYTES value validateEugeniy Paltsev
Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger or equal to any cache line length by comparing it with values previously read from ARC cache BCR registers. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-07-30net/ipv6: fix metrics leakSabrina Dubroca
Since commit d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from() assigns the rt->from pointer and increases the refcount on from's metrics. This reference is never released. Introduce the fib6_metrics_release() helper and use it to release the metrics. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30fib_rules: NULL check before kfree is not neededYueHaibing
kfree(NULL) is safe,so this removes NULL check before freeing the mem Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net: phy: mscc: the extended page access register is 16 bitsQuentin Schulz
The Extended Page Access is a 16-bit register, so change the page parameter of vsc85xx_phy_page_set to a u16. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net/tls: Use socket data_ready callback on record availabilityVakul Garg
On receipt of a complete tls record, use socket's saved data_ready callback instead of state_change callback. In function tls_queue(), the TLS record is queued in encrypted state. But the decryption happen inline when tls_sw_recvmsg() or tls_sw_splice_read() get invoked. So it should be ok to notify the waiting context about the availability of data as soon as we could collect a full TLS record. For new data availability notification, sk_data_ready callback is more appropriate. It points to sock_def_readable() which wakes up specifically for EPOLLIN event. This is in contrast to the socket callback sk_state_change which points to sock_def_wakeup() which issues a wakeup unconditionally (without event mask). Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30xen-netfront: wait xenbus state change when load module manuallyXiao Liang
When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: Xiao Liang <xiliang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30Merge branch 'TC-refactor-act_mirred-packets-re-injection'David S. Miller
Paolo Abeni says: ==================== TC: refactor act_mirred packets re-injection This series is aimed at improving the act_mirred redirect performances. Such action is used by OVS to represent TC S/W flows, and it's current largest bottle-neck is the need for a skb_clone() for each packet. The first 2 patches introduce some cleanup and safeguards to allow extending tca_result - we will use it to store RCU protected redirect information - and introduce a clear separation between user-space accessible tcfa_action values and internal values accessible only by the kernel. Then a new tcfa_action value is introduced: TC_ACT_REINJECT, similar to TC_ACT_REDIRECT, but preserving the mirred semantic. Such value is not accessible from user-space. The last patch exploits the newly introduced infrastructure in the act_mirred action, to avoid a skb_clone, when possible. Overall this the above gives a ~10% performance improvement in forwarding tput, when using the TC S/W datapath. v1 -> v2: - preserve the rcu lock in act_bpf - add and use a new action value to reinject the packets, preserving the mirred semantic v2 -> v3: - renamed to new action as TC_ACT_REINJECT - TC_ACT_REINJECT is not exposed to user-space v3 -> v4: - dropped the TC_ACT_REDIRECT patch - report failure via extack, too - rename the new action as TC_ACT_REINSERT - skip clone only if the control action don't touch tcf_result v4 -> v5: - fix a couple of build issue reported by kbuild bot - dont split messages ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30act_mirred: use TC_ACT_REINSERT when possiblePaolo Abeni
When mirred is invoked from the ingress path, and it wants to redirect the processed packet, it can now use the TC_ACT_REINSERT action, filling the tcf_result accordingly, and avoiding a per packet skb_clone(). Overall this gives a ~10% improvement in forwarding performance for the TC S/W data path and TC S/W performances are now comparable to the kernel openvswitch datapath. v1 -> v2: use ACT_MIRRED instead of ACT_REDIRECT v2 -> v3: updated after action rename, fixed typo into the commit message v3 -> v4: updated again after action rename, added more comments to the code (JiriP), skip the optimization if the control action need to touch the tcf_result (Paolo) v4 -> v5: fix sparse warning (kbuild bot) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net/tc: introduce TC_ACT_REINSERT.Paolo Abeni
This is similar TC_ACT_REDIRECT, but with a slightly different semantic: - on ingress the mirred skbs are passed to the target device network stack without any additional check not scrubbing. - the rcu-protected stats provided via the tcf_result struct are updated on error conditions. This new tcfa_action value is not exposed to the user-space and can be used only internally by clsact. v1 -> v2: do not touch TC_ACT_REDIRECT code path, introduce a new action type instead v2 -> v3: - rename the new action value TC_ACT_REINJECT, update the helper accordingly - take care of uncloned reinjected packets in XDP generic hook v3 -> v4: - renamed again the new action value (JiriP) v4 -> v5: - fix build error with !NET_CLS_ACT (kbuild bot) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30tc/act: remove unneeded RCU lock in action callbackPaolo Abeni
Each lockless action currently does its own RCU locking in ->act(). This allows using plain RCU accessor, even if the context is really RCU BH. This change drops the per action RCU lock, replace the accessors with the _bh variant, cleans up a bit the surrounding code and documents the RCU status in the relevant header. No functional nor performance change is intended. The goal of this patch is clarifying that the RCU critical section used by the tc actions extends up to the classifier's caller. v1 -> v2: - preserve rcu lock in act_bpf: it's needed by eBPF helpers, as pointed out by Daniel v3 -> v4: - fixed some typos in the commit message (JiriP) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 11:44:54 +0000