summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-01arm64: debug: convert OS lock CPU hotplug notifier to new infrastructureWill Deacon
The arm64 debug monitor initialisation code uses a CPU hotplug notifier to clear the OS lock when CPUs come online. This patch converts the code to the new hotplug mechanism. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01arm64: hw_breakpoint: convert CPU hotplug notifier to new infrastructureWill Deacon
The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to reset the {break,watch}point registers when CPUs come online. This patch converts the code to the new hotplug mechanism, whilst moving the invocation earlier to remove the need to disable IRQs explicitly in the driver (which could cause havok if we trip a watchpoint in an IRQ handler whilst restoring the debug register state). Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01perf probe: Ignore vmlinux buildid if offline kernel is givenMasami Hiramatsu
Ignore the buildid of running kernel when both of --definition and --vmlinux is given because that kernel should be off-line. This also skips post-processing of kprobe event for relocating symbol and checking blacklist, because it can not be done on off-line kernel. E.g. without this fix perf shows an error as below ---- $ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open ./vmlinux-arm with build id 7a1f76dd56e9c4da707cd3d6333f50748141434b not found, continuing without symbols Failed to find symbol do_sys_open in kernel Error: Failed to add events. ---- with this fix, we can get the definition ---- $ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open p:probe/do_sys_open do_sys_open+0 ---- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147214228193.23638.12581984840822162131.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Show trace event definitionMasami Hiramatsu
Add --definition/-D option for showing the trace-event definition in stdout. This can be useful in debugging or combined with a shell script. e.g. ---- # perf probe --definition 'do_sys_open $params' p:probe/do_sys_open _text+2261728 dfd=%di:s32 filename=%si:u64 flags=%dx:s32 mode=%cx:u16 ---- Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147214226712.23638.2240534040014013658.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf config: Show default report configuration in example and docsMilian Wolff
Signed-off-by: Milian Wolff <milian.wolff@kdab.com> LPU-Reference: 20160830134106.21240-2-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Demangle symbols for synthesized @plt entries.Milian Wolff
The symbols in the synthesized @plt entries where not demangled before, i.e. we could end up with entries such as: $ perf report Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141 Children Self Command Shared Object Symbol - 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main - 73.81% main - 33.57% hypot 27.76% __hypot_finite 15.97% __muldc3 2.90% __muldc3@plt 2.40% _ZNK6QImage6heightEv@plt + 2.14% QColor::rgb 1.94% _ZNK6QImage5widthEv@plt 1.92% cabs@plt This patch remedies this issue by also applying demangling to the synthesized symbols. The output for the above is now: $ perf report Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141 Children Self Command Shared Object Symbol - 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main - 73.81% main - 33.57% hypot 27.76% __hypot_finite 15.97% __muldc3 2.90% __muldc3@plt 2.40% QImage::height() const@plt + 2.14% QColor::rgb 1.94% QImage::width() const@plt 1.92% cabs@plt Signed-off-by: Milian Wolff <milian.wolff@kdab.com> LPU-Reference: 20160830114102.30863-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf probe: Do not use map_load filters for functionArnaldo Carvalho de Melo
It is simpler to just do the loop, no need for globals and the last user of such facility disappears. Testing: # perf probe -F [a-z]*recvmsg aead_recvmsg compat_SyS_recvmsg compat_sys_recvmsg hash_recvmsg inet_recvmsg kernel_recvmsg netlink_recvmsg packet_recvmsg ping_recvmsg raw_recvmsg rawv6_recvmsg rng_recvmsg security_socket_recvmsg selinux_socket_recvmsg skcipher_recvmsg sock_common_recvmsg sock_no_recvmsg sock_recvmsg sys_recvmsg tcp_recvmsg udp_recvmsg udpv6_recvmsg unix_dgram_recvmsg unix_seqpacket_recvmsg unix_stream_recvmsg # Without filters: # perf probe -F | tail -5 zswap_pool_create zswap_pool_current zswap_update_total_size zswap_writeback_entry zswap_zpool_param_set # # perf probe -F | wc -l 33311 # Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160831130427.GA13095@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01arm64: remove duplicate macro __KERNEL__ checkzijun_hu
remove duplicate macro __KERNEL__ check Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-01clk: rockchip: add new clock-type for the ddrclkLin Huang
Changing the rate of the DDR clock needs special care, as the DDR is of course in use and will react badly if the rate changes under it. Over time different approaches to handle that were used. Past SoCs like the rk3288 and before would store some code in SRAM while the rk3368 used a SCPI variant and let a coprocessor handle that. New rockchip platforms like the rk3399 have a dcf controller to do ddr frequency scaling, and support for this controller will be implemented in the arm-trusted-firmware. This new clock-type should over time handle all these methods for handling DDR rate changes, but right now it will concentrate on the SIP interface used to talk to ARM trusted firmware. The SIP interface counterpart was merged from pull-request #684 [0] into the upstream arm-trusted-firmware codebase. [0] https://github.com/ARM-software/arm-trusted-firmware/pull/684 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-01Merge branch 'v4.9-shared/sip-hdr' into v4.9-clk/nextHeiko Stuebner
2016-09-01ovl: update docMiklos Szeredi
Some of the documented quirks no longer apply. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: listxattr: use strnlen()Miklos Szeredi
Be defensive about what underlying fs provides us in the returned xattr list buffer. If it's not properly null terminated, bail out with a warning insead of BUG. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01ovl: Switch to generic_getxattrAndreas Gruenbacher
Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use those same handlers for iop->getxattr as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: copyattr after setting POSIX ACLMiklos Szeredi
Setting POSIX acl may also modify the file mode, so need to copy that up to the overlay inode. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Switch to generic_removexattrAndreas Gruenbacher
Commit d837a49bd57f ("ovl: fix POSIX ACL setting") switches from iop->setxattr from ovl_setxattr to generic_setxattr, so switch from ovl_removexattr to generic_removexattr as well. As far as permission checking goes, the same rules should apply in either case. While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that this is not an iop->setxattr implementation and remove the unused inode argument. Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the order of handlers in ovl_xattr_handlers. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Get rid of ovl_xattr_noacl_handlers arrayAndreas Gruenbacher
Use an ordinary #ifdef to conditionally include the POSIX ACL handlers in ovl_xattr_handlers, like the other filesystems do. Flag the code that is now only used conditionally with __maybe_unused. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: Fix OVL_XATTR_PREFIXAndreas Gruenbacher
Make sure ovl_own_xattr_handler only matches attribute names starting with "overlay.", not "overlayXXX". Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: fix spelling mistake: "directries" -> "directories"Colin Ian King
Trivial fix to spelling mistake in pr_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: don't cache acl on overlay layerMiklos Szeredi
Some operations (setxattr/chmod) can make the cached acl stale. We either need to clear overlay's acl cache for the affected inode or prevent acl caching on the overlay altogether. Preventing caching has the following advantages: - no double caching, less memory used - overlay cache doesn't go stale when fs clears it's own cache Possible disadvantage is performance loss. If that becomes a problem get_acl() can be optimized for overlayfs. This patch disables caching by pre setting i_*acl to a value that - has bit 0 set, so is_uncached_acl() will return true - is not equal to ACL_NOT_CACHED, so get_acl() will not overwrite it The constant -3 was chosen for this purpose. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: use cached acl on underlying layerMiklos Szeredi
Instead of calling ->get_acl() directly, use get_acl() to get the cached value. We will have the acl cached on the underlying inode anyway, because we do permission checking on the both the overlay and the underlying fs. So, since we already have double caching, this improves performance without any cost. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01ovl: proper cleanup of workdirMiklos Szeredi
When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01ovl: remove posix_acl_default from workdirMiklos Szeredi
Clear out posix acl xattrs on workdir and also reset the mode after creation so that an inherited sgid bit is cleared. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01ovl: handle umask and posix_acl_default correctly on creationMiklos Szeredi
Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to create functions without masking against umask. Another problem when creating over a whiteout is that the default posix acl is not inherited from the parent dir (because the real parent dir at the time of creation is the work directory). Fix these problems by: a) If upper fs does not have MS_POSIXACL, then mask mode with umask. b) If creating over a whiteout, call posix_acl_create() to get the inherited acls. After creation (but before moving to the final destination) set these acls on the created file. posix_acl_create() also updates the file creation mode as appropriate. Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-01EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()York Sun
Replace obsolete simple_strtoul() with kstrtoul(). Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471990593-27536-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, layerscape: Add Layerscape EDAC supportYork Sun
Add DDR EDAC driver for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471990465-27443-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, fsl_ddr: Fix IRQ dispose warning when module is removedYork Sun
When compiled as a module, removing it causes kernel warnings when irq_dispose_mapping() is called. Instead of calling irq_of_parse_and_map(), use platform_get_irq() to acquire the IRQ number. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: morbidrsa@gmail.com Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-8-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, fsl_ddr: Add support for little endianYork Sun
Get endianness from device tree. Both big endian and little endian are supported. Default to big endian for backwards compatibility to MPC85xx. Signed-off-by: York Sun <york.sun@nxp.com> Acked-by: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: morbidrsa@gmail.com Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-7-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, fsl_ddr: Add missing DDR DRAM typesYork Sun
The compatible DDR controllers may support DDR, DDR2, DDR3, DDR4 DRAM. An individual controller doesn't support all of them. The EDAC driver reads SDRAM_CFG to determine which mode is configured. Add DDR4 and drop the defines used only in the mtype assignment. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: morbidrsa@gmail.com Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-6-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, fsl_ddr: Rename macros and namesYork Sun
Use FSL-specific prefix for macros, variables and functions. Signed-off-by: York Sun <york.sun@nxp.com> Cc: Johannes Thumshirn <morbidrsa@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-5-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xxYork Sun
The mpc85xx-compatible DDR controllers are used on ARM-based SoCs too. Carve out the DDR part from the mpc85xx EDAC driver in preparation to support both architectures. Signed-off-by: York Sun <york.sun@nxp.com> Cc: Johannes Thumshirn <morbidrsa@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470946525-3410-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, mpc85xx: Replace printk() with pr_* formatYork Sun
Replace printk() with pr_err/pr_warn/pr_info macros. Signed-off-by: York Sun <york.sun@nxp.com> Cc: Johannes Thumshirn <morbidrsa@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-3-git-send-email-york.sun@nxp.com [ Boris: unbreak strings for easier greppability. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1York Sun
On e500v1, read fault exception enable (RFXE) controls whether assertion of core_fault_in causes a machine check interrupt. Assertion of core_fault_in can result from uncorrectable data error, such as an L2 multi-bit ECC error. It can also occur from a system error if logic on the integrated device signals a fault for nonfatal errors. RFXE bit is cleared out of reset, and should be left clear for normal operation. Assertion of core_fault_in does not cause a machine check. RFXE is set specifically for RIO (Rapid IO) and PCI for book E to catch the errors by machine check. With this bit set, the EDAC driver can't get the interrupt in case of uncorrectable error. So this bit is cleared in favor of EDAC. However, the benefit of catching such uncorrectable error doesn't outweigh the other errors which may hang the system. Besides, e500v2 has different errors masked by RFXE, and e500mc doesn't support this bit. It is more reasonable to leave RFXE as is in the EDAC driver, and leave the uncorrectable errors triggering machine check for e500v1. Suggested-by: Scott Wood <oss@buserror.net> Signed-off-by: York Sun <york.sun@nxp.com> Cc: Johannes Thumshirn <morbidrsa@gmail.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: oss@buserror.net Cc: stuart.yoder@nxp.com Link: http://lkml.kernel.org/r/1470779760-16483-2-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, altera: Rename MC trigger to common nameThor Thayer
Rename the Memory Controller debug trigger to the same common name as the EDAC devices. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471622666-15197-3-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01EDAC, altera: Rename device trigger to common nameThor Thayer
The L2 and OCRAM devices have different ecc trigger names than the other EDAC devices (FIFO peripherals). Make them all the same and remove the character array from the device structure. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471622666-15197-2-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-09-01x86/platform/intel-mid: Enable SD card detection on MerrifieldAndy Shevchenko
Intel Merrifield platform provides SD card interface. The interface allows user to plug SD card to extend storage capacity. Append the essential data to enable SD card detection on it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160831135713.79066-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-01x86/platform/intel-mid: Enable WiFi on Intel EdisonAndy Shevchenko
Intel Edison board provides built-in WiFi dongle based on Broadcom BCM43340. Append the essential data to enable WiFi on Intel Edison. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160831135713.79066-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-31Merge branch 'qed-fixes'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: dcbx fix series. The series contains several small fixes for qed* dcbx module. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31qed: Clear dcbx memory buffers before the usage.Sudarsana Reddy Kalluru
This patch takes care of clearing the uninitialized buffer before using it. 1. pfc pri-enable bitmap need to be cleared before setting the requested enable bits. Without this, the un-touched values will be merged with requested values and sent to MFW. 2. The data in app-entry field need to be cleared before using it. 3. Clear the output data buffer used in qed_dcbx_query_params(). Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31qed: Set selection-field while configuring the app entry in ieee mode.Sudarsana Reddy Kalluru
Management firmware requires the selection-field (SF) to be set for configuring the application/protocol entry in IEEE mode. Without this setting, the app entry will be configured incorrectly in MFW. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31qed*: Disallow dcbx configuration for VF interfaces.Sudarsana Reddy Kalluru
Dcbx configuration is not supported for VF interfaces. Hence don't populate the callbacks for VFs and also fail the dcbx-query for VFs. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31kcm: fix a socket double freeWANG Cong
Dmitry reported a double free on kcm socket, which could be easily reproduced by: #include <unistd.h> #include <sys/syscall.h> int main() { int fd = syscall(SYS_socket, 0x29ul, 0x5ul, 0x0ul, 0, 0, 0); syscall(SYS_ioctl, fd, 0x89e2ul, 0x20a98000ul, 0, 0, 0); return 0; } This is because on the error path, after we install the new socket file, we call sock_release() to clean up the socket, which leaves the fd pointing to a freed socket. Fix this by calling sys_close() on that fd directly. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31Merge branch 'mediatek-fixes'David S. Miller
Sean Wang says: ==================== net: ethernet: mediatek: a couple of fixes a couple of fixes come out from integrating with linux-4.8 rc1 they all are verified and workable on linux-4.8 rc1 Changes since v1: - usage of loops to work out if all required clock are ready instead of tedious coding - remove redundant pinctrl setup that is already done by core driver thanks for careful and patient reviewing by Andrew Lunn - splitting distinct changes into the separate patches - change variable naming from err to ret for readable coding Changes since v2: - restore to original clock disabling sequence that is changed accidentally in the last version - refine the commit log that would cause misunderstanding what has been done in the changes - refine the commit log that would cause footnote losing due to improper delimiter use Changes since v3: - fix git rejects caused by mixing a change from net-next, so remake the patch set based on the current net branch again. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix error handling inside mtk_mdio_initSean Wang
Return -ENODEV if the MDIO bus is disabled in the device tree. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: use devm_mdiobus_alloc instead of mdiobus_alloc ↵Sean Wang
inside mtk_mdio_init a lot of parts in the driver uses devm_* APIs to gain benefits from the device resource management, so devm_mdiobus_alloc is also used instead of mdiobus_alloc to have more elegant code flow. Using common code provided by the devm_* helps to 1) have simplified the code flow as [1] says 2) decrease the risk of incorrect error handling by human 3) only a few drivers used it since it was proposed on linux 3.16, so just hope to promote for this. Ref: [1] https://patchwork.ozlabs.org/patch/344093/ Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix the missing of_node_put() after node is used ↵Sean Wang
done inside mtk_mdio_init This patch adds the missing of_node_put() after finishing the usage of of_get_child_by_name. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix issue of driver removal with interface is upSean Wang
mtk_stop() must be called to stop for freeing DMA resources acquired and restoring state changed by mtk_open() firstly when module removal. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix logic unbalance between probe and removeSean Wang
original mdio_cleanup is not in the symmetric place against where mdio_init is, so relocate mdio_cleanup to the right one. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: remove redundant free_irq for devm_request_irq ↵Sean Wang
allocated irq these irqs are not used for shared irq and disabled during ethernet stops. irq requested by devm_request_irq is safe to be freed automatically on driver detach. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix API usage with skb_free_fragSean Wang
use skb_free_frag() instead of legacy put_page() Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: mediatek: fix incorrect return value of devm_clk_get with ↵Sean Wang
EPROBE_DEFER 1) If the return value of devm_clk_get is EPROBE_DEFER, we should defer probing the driver. The change is verified and works based on 4.8-rc1 staying with the latest clk-next code for MT7623. 2) Changing with the usage of loops to work out if all clocks required are fine Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 19:40:46 +0000