summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-30ARM: dts: mxs: Add PWM3 muxing options for i.MX28Julien Boibessot
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-29ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointerPaul Walmsley
The OMAP watchdog timer driver directly calls a function exported by code in arch/arm/mach-omap2. This is not good; it tightly couples this driver to the mach-omap2 integration code. Instead, add a temporary platform_data function pointer to abstract this function call. A subsequent patch will convert the watchdog driver to use this function pointer. This patch also moves the device creation code out of arch/arm/mach-omap2/devices.c and into arch/arm/mach-omap2/wd_timer.c. This is another step towards the removal of arch/arm/mach-omap2/devices.c. Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Wim Van Sebroeck <wim@iguana.be> [paul@pwsan.com: skip wd_timer device creation when DT blob is present] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-29ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return typePaul Walmsley
An older version of the patch "ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)" was sent upstream, which used the wrong return type for the omap1_get_reset_sources() function. Fix it to return a u32, which is what the WDTIMER platform_data function pointer read_reset_sources() expects. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-29hwmon, fam15h_power: Change email address, MAINTAINERS entryAndreas Herrmann
Signed-off-by: Andreas Herrmann <herrmann.der.user@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-29ath9k: fix stale pointers potentially causing access to free'd skbsFelix Fietkau
bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2012-10-29ARM: dts: OMAP: Rename pandaES and var_som for consistencyBenoit Cousson
Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: omap5: Update MMC with address space and interruptsSebastien Guiriec
Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: omap5: Update UART with address space and interruptsSebastien Guiriec
Add base address and interrupt line inside Device Tree data for OMAP5. Fix as well the wrong compatible string on UART5 & 6. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> [b-cousson@ti.com: Update the changelog to reflect the fixes done in the patch] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: omap5: Update I2C with address space and interruptsSebastien Guiriec
Add base address and interrupt line inside Device Tree data for OMAP5 Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: omap5: Update GPIO with address space and interruptsSebastien Guiriec
Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: OMAP: Add counter-32k nodesJon Hunter
Adds the counter-32k timers nodes present in OMAP2/3/4 devices and device-tree binding documentation for OMAP counter-32k. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: OMAP: Add timer nodesJon Hunter
Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplicationBenoit Cousson
The interrupt-parent attribute does not have to be added in each node since the fmwk will check for the parent as well to get it. Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the attributes from every nodes that were using it. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Sebastien Guiriec <s-guiriec@ti.com>
2012-10-29ARM: dts: OMAP4: add *reg* property for ocp2scpKishon Vijay Abraham I
*reg* property for ocp2scp was previously obtained from ti,hwmods property. But that is now explicitly added to the dt node. Also updated the documentation with *reg* info. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: Add twl4030-usb dataKishon Vijay Abraham I
Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: Add twl6030-usb dataKishon Vijay Abraham I
Add twl6030-usb data node in twl6030 device tree file. twl6030-usb is the comparator driver for USB that detects VBUS and ID events. The dt data is comprised of two interrupts, one for ID and one for VBUS and a phandle to the regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29Documentation: dt: i2c: Update trivial-devices listAnilKumar Ch
Update i2c trivial-devices list by adding the description for ti,tmp275 temperature sensor and taos,tsl2550 ambient light sensor. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: Add am335x-evmsk.dtsAnilKumar Ch
Add AM335X EVM-SK device tree source (am335x-sk.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Also adds support for tps65910 regulator and lis331dlh accelerometer. Following drivers/functionality were tested on AM335x-EVM-SK. * I2C * TPS65910 regulators * lis331dlh accelerometer AM335x EVM Starter Kit details can be accessed from: http://www.ti.com/tool/tmdssk3358 Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT dataAnilKumar Ch
In AM335x EVM tsl2550 ambient light sensor is connected to I2C2 bus. Add child node inside i2c2 node with i2c slave address. TAOS tsl2550 sensor is using a two-wire SMBus serial interface. Reduce I2C2 clock frequency to 100kHz from 400kHz because the maximum clock frequency of SMBus is 100kHz. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [b-cousson@ti.com: Clean the changelog] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add temperature sensor device tree data to am335x-evmAnilKumar Ch
Add temperature sensor DT data to am335x-evm.dts. In AM335x EVM tmp275 temperature sensor is connected to I2C2 bus. So this patch adds child node inside i2c2 node with i2c slave address. This patch is tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evmAnilKumar Ch
Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM lis331dlh accelerometer is connected to I2C2 bus. So this patch change the status of I2C2 node to "okay" to use I2C2 bus. Also added all the required platform data to am335x-evm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add D_CAN device tree dataAnilKumar Ch
Add Bosch D_CAN controller device tree data to AM33XX dtsi file by adding d_can device nodes with all the necessary parameters. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add basic pinctrl device tree dataAnilKumar Ch
Adds basic pinctrl device tree data for AM33XX family of devices. This patch is based on the pinctrl-single driver. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: AM33XX: Add device tree OPP tableAnilKumar Ch
Add DT OPP table for AM33XX family of devices. This data is decoded by OF with of_init_opp_table() helper function. Also adds cpu0 supply name to the corresponding dts files. cpu0-supply name is used by cpufreq-cpu0 driver to get the regulator pointer for voltage modifications. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29ARM: dts: Add omap3-beagle.dtsJon Hunter
Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes form Sage Weil: "There are two fixes in the messenger code, one that can trigger a NULL dereference, and one that error in refcounting (extra put). There is also a trivial fix that in the fs client code that is triggered by NFS reexport." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix dentry reference leak in encode_fh() libceph: avoid NULL kref_put when osd reset races with alloc_msg rbd: reset BACKOFF if unable to re-queue
2012-10-29ceph: fix dentry reference leak in encode_fh()David Zafman
Call to d_find_alias() needs a corresponding dput() This fixes http://tracker.newdream.net/issues/3271 Signed-off-by: David Zafman <david.zafman@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-10-29ARM: davinci: da850: generate dtbs for da850 boardsSekhar Nori
This helps generating device tree blobs for DaVinci DA850 boards with command: 'make ARCH=arm dtbs'. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: add support for am1808 based EnBW CMC boardHeiko Schocher
This board supports: - AM1808 based board - 64 MiB DDR ram - 2 MiB Nor flash - 128 MiB NAND flash - use internal RTC - I2C support - hwmon lm75 support - UBI/UBIFS support - MMC support - USB OTG support This patch adds the basic DTS file enabling the serial ports. Other features will be added in due course of time. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Wolfgang Denk <wd@denx.de> [nsekhar@ti.com: modified after dtsi refactoring and added binding documentation] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850 evm: add DT dataSekhar Nori
Add device tree data for DA850 EVM. At this time, only information on serial ports is added. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: davinci: da850: add SoC DT dataHeiko Schocher
Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accessesWill Deacon
Using the 'o' memory constraint in inline assembly can result in GCC generating invalid immediate offsets for memory access instructions with reduced addressing capabilities (i.e. smaller than 12-bit immediate offsets): http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54983 As there is no constraint to specify the exact addressing mode we need, fallback to using 'Q' exclusively for halfword I/O accesses. This may emit an additional add instruction (using an extra register) in order to construct the address but it will always be accepted by GAS. Reported-by: Bastian Hecht <hechtb@googlemail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-29ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and ↵Paul Walmsley
CONFIG_VFPv3 set After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board started crashing during boot with omap2plus_defconfig: [ 3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.915954] mmcblk0: p1 [ 4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.093719] Modules linked in: [ 4.096954] CPU: 0 Not tainted (3.6.0-02232-g759e00b #570) [ 4.103149] PC is at vfp_reload_hw+0x1c/0x44 [ 4.107666] LR is at __und_usr_fault_32+0x0/0x8 It turns out that the context save/restore fix unmasked a latent bug in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make VFPv3 usable on ARMv6"). When CONFIG_VFPv3 is set, but the kernel is booted on a pre-VFPv3 core, the code attempts to save and restore the d16-d31 VFP registers. These are only present on non-D16 VFPv3+, so this results in an undefined instruction exception. The code didn't crash before commit 846a136 because the save and restore code was only touching d0-d15, present on all VFP. Fix by implementing a request from Russell King to add a new HWCAP flag that affirmatively indicates the presence of the d16-d31 registers: http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2 and some feedback from Måns to clarify the name of the HWCAP flag. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Martin <dave.martin@linaro.org> Cc: Måns Rullgård <mans.rullgard@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-29ARM: 7565/1: sched: stop sched_clock() during suspendFelipe Balbi 2
The scheduler imposes a requirement to sched_clock() which is to stop the clock during suspend, if we don't do that any RT thread will be rescheduled in the future which might cause any sort of problems. This became an issue on OMAP when we converted omap-i2c.c to use threaded IRQs, it turned out that depending on how much time we spent on suspend, the I2C IRQ thread would end up being rescheduled so far in the future that I2C transfers would timeout and, because omap_hsmmc depends on an I2C-connected device to detect if an MMC card is inserted in the slot, our rootfs would just vanish. arch/arm/kernel/sched_clock.c already had an optional implementation (sched_clock_needs_suspend()) which would handle scheduler's requirement properly, what this patch does is simply to make that implementation non-optional. Note that this has the side-effect that printk timings won't reflect the actual time spent on suspend so other methods to measure that will have to be used. This has been tested with beagleboard XM (OMAP3630) and pandaboard rev A3 (OMAP4430). Suspend to RAM is now working after this patch. Thanks to Kevin Hilman for helping out with debugging. Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-29ARM: davinci: da850: add DT boot supportSekhar Nori
Add support for booting DA850 using flattened device tree to describe the hardware. At this time only the very basic bootup using a serial console is supported. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29zynq: move static peripheral mappingsJosh Cartwright
Shifting them up into the vmalloc region prevents the following warning, when booting a zynq qemu target with more than 512mb of RAM: BUG: mapping for 0xe0000000 at 0xe0000000 out of vmalloc space In addition, it allows for reuse of these mappings when the proper drivers issue requests via ioremap(). There are currently unknown issues with the early uart mapping. For now, the uart will be mapped to a known working address. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: remove use of CLKDEV_LOOKUPJosh Cartwright
The Zynq support in mainline does not (yet) make use of any of the generic clk or clk lookup functionality. Remove what is upstream for now, until the out-of-tree implementation is in suitable form for merging. An important side effect of this patch is that it allows the building of a Zynq kernel without running into unresolved symbol problems: drivers/built-in.o: In function `amba_get_enable_pclk': clkdev.c:(.text+0x444): undefined reference to `clk_enable' drivers/built-in.o: In function `amba_remove': clkdev.c:(.text+0x488): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_probe': clkdev.c:(.text+0x540): undefined reference to `clk_disable' drivers/built-in.o: In function `amba_device_add': clkdev.c:(.text+0x77c): undefined reference to `clk_disable' drivers/built-in.o: In function `enable_clock': clkdev.c:(.text+0x29738): undefined reference to `clk_enable' drivers/built-in.o: In function `disable_clock': clkdev.c:(.text+0x29778): undefined reference to `clk_disable' drivers/built-in.o: In function `__pm_clk_remove': clkdev.c:(.text+0x297f8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_suspend': clkdev.c:(.text+0x29bc8): undefined reference to `clk_disable' drivers/built-in.o: In function `pm_clk_resume': clkdev.c:(.text+0x29c28): undefined reference to `clk_enable' make[2]: *** [vmlinux] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 In addition, eliminate Zynq's "use" of the versatile platform, as it is no longer needed. As Nick Bowler points out: For the record, I think this was introduced by commit 56a34b03ff427 ("ARM: versatile: Make plat-versatile clock optional") which forgot to select PLAT_VERSATILE_CLOCK on Zynq. This is not all that surprising, because the fact that Zynq "uses" PLAT_VERSATILE is secretly hidden in the Makefile. Nevertheless, the only feature from versatile that Zynq needed was the clock support, so this patch should *also* delete the secret use of plat-versatile by removing this line from arch/arm/Makefile: plat-$(CONFIG_ARCH_ZYNQ) += versatile Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use pl310 device tree bindingsJosh Cartwright
The Zynq has a PL310 L2 cache controller. Convert in-tree uses to using the device tree. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-29zynq: use GIC device tree bindingsJosh Cartwright
The Zynq uses the cortex-a9-gic. This eliminates the need to hardcode register addresses. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Cc: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-10-28ext4: fix unjournaled inode bitmap modificationEric Sandeen
commit 119c0d4460b001e44b41dcf73dc6ee794b98bd31 changed ext4_new_inode() such that the inode bitmap was being modified outside a transaction, which could lead to corruption, and was discovered when journal_checksum found a bad checksum in the journal during log replay. Nix ran into this when using the journal_async_commit mount option, which enables journal checksumming. The ensuing journal replay failures due to the bad checksums led to filesystem corruption reported as the now infamous "Apparent serious progressive ext4 data corruption bug" [ Changed by tytso to only call ext4_journal_get_write_access() only when we're fairly certain that we're going to allocate the inode. ] I've tested this by mounting with journal_checksum and running fsstress then dropping power; I've also tested by hacking DM to create snapshots w/o first quiescing, which allows me to test journal replay repeatedly w/o actually power-cycling the box. Without the patch I hit a journal checksum error every time. With this fix it survives many iterations. Reported-by: Nix <nix@esperi.org.uk> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-10-28netfilter: nf_defrag_ipv6: solve section mismatch in nf_conntrack_reasmHein Tibosch
WARNING: net/ipv6/netfilter/nf_defrag_ipv6.o(.text+0xe0): Section mismatch in reference from the function nf_ct_net_init() to the function .init.text:nf_ct_frag6_sysctl_register() The function nf_ct_net_init() references the function __init nf_ct_frag6_sysctl_register(). In case nf_conntrack_ipv6 is compiled as a module, nf_ct_net_init could be called after the init code and data are unloaded. Therefore remove the "__net_init" annotation from nf_ct_frag6_sysctl_register(). Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-10-28netfilter: nf_nat: don't check for port change on ICMP tuplesUlrich Weber
ICMP tuples have id in src and type/code in dst. So comparing src.u.all with dst.u.all will always fail here and ip_xfrm_me_harder() is called for every ICMP packet, even if there was no NAT. Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-10-28Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull i2c subsystem fixes from Jean Delvare. * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-i801: Fix comment i2c-i801: Simplify dependency towards GPIOLIB i2c-stub: Move to drivers/i2c
2012-10-28i2c-i801: Fix commentJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-28i2c-i801: Simplify dependency towards GPIOLIBJean Delvare
Arbitrarily selecting GPIOLIB causes trouble on some architectures, so don't do that. Instead, just make the optional multiplexing code depend on CONFIG_I2C_MUX_GPIO instead of CONFIG_I2C_MUX for now. We can revisit if the i2c-i801 driver ever supports other multiplexing flavors. Also make that optional code depend on DMI, as it won't do anything without that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Fengguang Wu <fengguang.wu@intel.com>
2012-10-28i2c-stub: Move to drivers/i2cJean Delvare
Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry. This is less confusing that way. I also fixed all checkpatch warnings and errors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Huewe <peterhuewe@gmx.de>
2012-10-28qlogicpti: Fix build warning.David S. Miller
The build warns: drivers/scsi/qlogicpti.c: In function 'qpti_sbus_probe': drivers/scsi/qlogicpti.c:1316:45: warning: passing argument 1 of 'scsi_host_alloc' discards 'const' qualifier from pointer target type [enabled by default] include/scsi/scsi_host.h:778:26: note: expected 'struct scsi_host_template *' but argument is of type 'const struct scsi_host_template *' The problem is that of_device_id->data is a const void pointer. This is pretty silly in this specific instance, because for all matched device IDs we set match->data to the same value, &qpti_template. So just use that directly instead of the unnecessary and improperly typed abstraction. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28sparc: Wire up sys_kcmp.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28sparc64: Improvde documentation and readability of atomic backoff code.David S. Miller
Document what's going on in asm/backoff.h with a large and descriptive comment. Refer to it above the cpu_relax() definition in asm/processor_64.h Rename the pause patching section to have "3insn" in it's name like the other patching sections do. Based upon feedback from Sam Ravnborg. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 03:11:03 +0000