summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-10mlxsw: spectrum_switchdev: Add MDB entries in prepare phaseIdo Schimmel
The driver cannot guarantee in the prepare phase that it will be able to write an MDB entry to the device. In case the driver returned success during the prepare phase, but then failed to add the entry in the commit phase, a WARNING [1] will be generated by the switchdev core. Fix this by doing the work in the prepare phase instead. [1] [ 358.544486] swp12s0: Commit of object (id=2) failed. [ 358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0 [ 358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350 [ 358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 358.580582] Workqueue: events switchdev_deferred_process_work [ 358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0 ... [ 358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286 [ 358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000 [ 358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8 [ 358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000 [ 358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000 [ 358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200 [ 358.659790] FS: 0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000 [ 358.668820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0 [ 358.683188] Call Trace: [ 358.685918] switchdev_port_obj_add_deferred+0x13/0x60 [ 358.691655] switchdev_deferred_process+0x6b/0xf0 [ 358.696907] switchdev_deferred_process_work+0xa/0x10 [ 358.702548] process_one_work+0x1f5/0x3f0 [ 358.707022] worker_thread+0x28/0x3c0 [ 358.711099] ? process_one_work+0x3f0/0x3f0 [ 358.715768] kthread+0x10d/0x130 [ 358.719369] ? __kthread_create_on_node+0x180/0x180 [ 358.724815] ret_from_fork+0x35/0x40 Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecsHans Holmberg
The introduction of multipage bio vectors broke pblk's partial read logic due to it not being prepared for multipage bio vectors. Use bio vector iterators instead of direct bio vector indexing. Fixes: 07173c3ec276 ("block: enable multipage bvecs") Reported-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Updated description. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10IB/hfi1: Do not flush send queue in the TID RDMA second legKaike Wan
When a QP is put into error state, the send queue will be flushed. This mechanism is implemented in both the first and the second leg of the send engine. Since the second leg is only responsible for data transactions in the KDETH space for the TID RDMA WRITE request, it should not perform the flushing of the send queue. This patch removes the flushing function of the second leg, but still keeps the bailing out of the QP if it is put into error state. Fixes: 70dcb2e3dc6a ("IB/hfi1: Add the TID second leg send packet builder") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-10apparmorfs: fix use-after-free on symlink traversalAl Viro
symlink body shouldn't be freed without an RCU delay. Switch apparmorfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-10securityfs: fix use-after-free on symlink traversalAl Viro
symlink body shouldn't be freed without an RCU delay. Switch securityfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Several fixes, add more reviewers to the list" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: Honour 'may_reduce_num' in vring_create_virtqueue MAiNTAINERS: add Paolo, Stefan for virtio blk/scsi virtio_pci: fix a NULL pointer reference in vp_del_vqs
2019-04-10RISC-V: Fix Maximum Physical Memory 2GiB option for 64bit systemsAnup Patel
The Maximum Physical Memory 2GiB option for 64bit systems is currently broken because kernel hangs at boot-time when this option is enabled and the underlying system has more than 2GiB memory. This issue can be easily reproduced on SiFive Unleashed board where we have 8GiB of memory. This patch fixes above issue by removing unusable memory region in setup_bootmem(). Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-04-10ASoC: wcd9335: Fix missing regmap requirementMarc Gonzalez
wcd9335.c: undefined reference to 'devm_regmap_add_irq_chip' Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-10drm/i915/dp: revert back to max link rate and lane count on eDPJani Nikula
Commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow") started to optize the eDP 1.4+ link config, both per spec and as preparation for display stream compression support. Sadly, we again face panels that flat out fail with parameters they claim to support. Revert, and go back to the drawing board. v2: Actually revert to max params instead of just wide-and-slow. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959 Fixes: 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: "Lee, Shawn C" <shawn.c.lee@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.0+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com (cherry picked from commit f11cb1c19ad0563b3c1ea5eb16a6bac0e401f428) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-10drm/i915/icl: Fix port disable sequence for mipi-dsiVandita Kulkarni
Re-enable clock gating of DDI clocks. v2: Fix the default ddi clk state for mipi-dsi (Imre) Fixes: 1026bea00381 ("drm/i915/icl: Ungate DSI clocks") Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553513202-13863-2-git-send-email-vandita.kulkarni@intel.com (cherry picked from commit 942d1cf48eae3fcd7e973cfb708d5c4860f0c713) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-10drm/i915/icl: Ungate ddi clocks before IO enableVandita Kulkarni
IO enable sequencing needs ddi clocks enabled. These clocks will be gated at a later point in the enable sequence. v2: Fix the commit header (Uma) v3: Remove the redundant read (Ville) Fixes: 949fc52af19e ("drm/i915/icl: add pll mapping for DSI") Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553513202-13863-1-git-send-email-vandita.kulkarni@intel.com (cherry picked from commit c5b81a325263a891d5811aabe938c87e03db4c37) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-10nvme: cancel request synchronouslyMing Lei
nvme_cancel_request() is used in error handler, and it is always reliable to cancel request synchronously, and avoids possible race in which request may be completed after real hw queue is destroyed. One issue is reported by our customer on NVMe RDMA, in which freed ib queue pair may be used in nvme_rdma_complete_rq(). Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bart Van Assche <bvanassche@acm.org> Cc: James Smart <james.smart@broadcom.com> Cc: linux-nvme@lists.infradead.org Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10blk-mq: introduce blk_mq_complete_request_sync()Ming Lei
In NVMe's error handler, follows the typical steps of tearing down hardware for recovering controller: 1) stop blk_mq hw queues 2) stop the real hw queues 3) cancel in-flight requests via blk_mq_tagset_busy_iter(tags, cancel_request, ...) cancel_request(): mark the request as abort blk_mq_complete_request(req); 4) destroy real hw queues However, there may be race between #3 and #4, because blk_mq_complete_request() may run q->mq_ops->complete(rq) remotelly and asynchronously, and ->complete(rq) may be run after #4. This patch introduces blk_mq_complete_request_sync() for fixing the above race. Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bart Van Assche <bvanassche@acm.org> Cc: James Smart <james.smart@broadcom.com> Cc: linux-nvme@lists.infradead.org Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10s390/zcrypt: fix possible deadlock situation on ap queue removeHarald Freudenberger
With commit 01396a374c3d ("s390/zcrypt: revisit ap device remove procedure") the ap queue remove is now a two stage process. However, a del_timer_sync() call may trigger the timer function which may try to lock the very same spinlock as is held by the function just initiating the del_timer_sync() call. This could end up in a deadlock situation. Very unlikely but possible as you need to remove an ap queue at the exact sime time when a timeout of a request occurs. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reported-by: Pierre Morel <pmorel@linux.ibm.com> Fixes: commit 01396a374c3d ("s390/zcrypt: revisit ap device remove procedure") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-10s390/3270: fix lockdep false positive on view->lockMartin Schwidefsky
The spinlock in the raw3270_view structure is used by con3270, tty3270 and fs3270 in different ways. For con3270 the lock can be acquired in irq context, for tty3270 and fs3270 the highest context is bh. Lockdep sees the view->lock as a single class and if the 3270 driver is used for the console the following message is generated: WARNING: inconsistent lock state 5.1.0-rc3-05157-g5c168033979d #12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (____ptrval____) (&(&view->lock)->rlock){?.-.}, at: tty3270_update+0x7c/0x330 Introduce a lockdep subclass for the view lock to distinguish bh from irq locks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-10scsi: virtio_scsi: limit number of hw queues by nr_cpu_idsDongli Zhang
When tag_set->nr_maps is 1, the block layer limits the number of hw queues by nr_cpu_ids. No matter how many hw queues are used by virtio-scsi, as it has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues. In addition, specifically for pci scenario, when the 'num_queues' specified by qemu is more than maxcpus, virtio-scsi would not be able to allocate more than maxcpus vectors in order to have a vector for each queue. As a result, it falls back into MSI-X with one vector for config and one shared for queues. Considering above reasons, this patch limits the number of hw queues used by virtio-scsi by nr_cpu_ids. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10virtio-blk: limit number of hw queues by nr_cpu_idsDongli Zhang
When tag_set->nr_maps is 1, the block layer limits the number of hw queues by nr_cpu_ids. No matter how many hw queues are used by virtio-blk, as it has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues. In addition, specifically for pci scenario, when the 'num-queues' specified by qemu is more than maxcpus, virtio-blk would not be able to allocate more than maxcpus vectors in order to have a vector for each queue. As a result, it falls back into MSI-X with one vector for config and one shared for queues. Considering above reasons, this patch limits the number of hw queues used by virtio-blk by nr_cpu_ids. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10block, bfq: fix use after free in bfq_bfqq_expirePaolo Valente
The function bfq_bfqq_expire() invokes the function __bfq_bfqq_expire(), and the latter may free the in-service bfq-queue. If this happens, then no other instruction of bfq_bfqq_expire() must be executed, or a use-after-free will occur. Basing on the assumption that __bfq_bfqq_expire() invokes bfq_put_queue() on the in-service bfq-queue exactly once, the queue is assumed to be freed if its refcounter is equal to one right before invoking __bfq_bfqq_expire(). But, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") this assumption is false. __bfq_bfqq_expire() may also invoke bfq_weights_tree_remove() and, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree"), also the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire() may invoke bfq_put_queue() twice, and this is the actual case where the in-service queue may happen to be freed. To address this issue, this commit moves the check on the refcounter of the queue right around the last bfq_put_queue() that may be invoked on the queue. Fixes: 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") Reported-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10ALSA: hda: Fix racy display power accessTakashi Iwai
snd_hdac_display_power() doesn't handle the concurrent calls carefully enough, and it may lead to the doubly get_power or put_power calls, when a runtime PM and an async work get called in racy way. This patch addresses it by reusing the bus->lock mutex that has been used for protecting the link state change in ext bus code, so that it can protect against racy display state changes. The initialization of bus->lock was moved from snd_hdac_ext_bus_init() to snd_hdac_bus_init() as well accordingly. Testcase: igt/i915_pm_rpm/module-reload #glk-dsi Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-10alarmtimer: Return correct remaining timeAndrei Vagin
To calculate a remaining time, it's required to subtract the current time from the expiration time. In alarm_timer_remaining() the arguments of ktime_sub are swapped. Fixes: d653d8457c76 ("alarmtimer: Implement remaining callback") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190408041542.26338-1-avagin@gmail.com
2019-04-10mac80211: fix RX STBC override byte orderJohannes Berg
The original patch neglected to take byte order conversions into account, fix that. Fixes: d9bb410888ce ("mac80211: allow overriding HT STBC capabilities") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-10locking/lockdep: Zap lock classes even with lock debugging disabledBart Van Assche
The following commit: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use") changed the behavior of lockdep_free_key_range() from unconditionally zapping lock classes into only zapping lock classes if debug_lock == true. Not zapping lock classes if debug_lock == false leaves dangling pointers in several lockdep datastructures, e.g. lock_class::name in the all_lock_classes list. The shell command "cat /proc/lockdep" causes the kernel to iterate the all_lock_classes list. Hence the "unable to handle kernel paging request" cash that Shenghui encountered by running cat /proc/lockdep. Since the new behavior can cause cat /proc/lockdep to crash, restore the pre-v5.1 behavior. This patch avoids that cat /proc/lockdep triggers the following crash with debug_lock == false: BUG: unable to handle kernel paging request at fffffbfff40ca448 RIP: 0010:__asan_load1+0x28/0x50 Call Trace: string+0xac/0x180 vsnprintf+0x23e/0x820 seq_vprintf+0x82/0xc0 seq_printf+0x92/0xb0 print_name+0x34/0xb0 l_show+0x184/0x200 seq_read+0x59e/0x6c0 proc_reg_read+0x11f/0x170 __vfs_read+0x4d/0x90 vfs_read+0xc5/0x1f0 ksys_read+0xab/0x130 __x64_sys_read+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: shenghui <shhuiw@foxmail.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use") # v5.1-rc1. Link: https://lkml.kernel.org/r/20190403233552.124673-1-bvanassche@acm.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-10ASoC: pcm: fix error handling when try_module_get() fails.Ranjani Sridharan
Handle error before returning when try_module_get() fails to prevent inconsistent mutex lock/unlock. Fixes: 52034add7 (ASoC: pcm: update module refcount if module_get_upon_open is set) Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-10apparmor: Restore Y/N in /sys for apparmor's "enabled"Kees Cook
Before commit c5459b829b71 ("LSM: Plumb visibility into optional "enabled" state"), /sys/module/apparmor/parameters/enabled would show "Y" or "N" since it was using the "bool" handler. After being changed to "int", this switched to "1" or "0", breaking the userspace AppArmor detection of dbus-broker. This restores the Y/N output while keeping the LSM infrastructure happy. Before: $ cat /sys/module/apparmor/parameters/enabled 1 After: $ cat /sys/module/apparmor/parameters/enabled Y Reported-by: David Rheinsberg <david.rheinsberg@gmail.com> Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com> Link: https://lkml.kernel.org/r/CADyDSO6k8vYb1eryT4g6+EHrLCvb68GAbHVWuULkYjcZcYNhhw@mail.gmail.com Fixes: c5459b829b71 ("LSM: Plumb visibility into optional "enabled" state") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: John Johansen <john.johansen@canonical.com>
2019-04-10ASoC: stm32: sai: fix master clock managementOlivier Moysan
When master clock is used, master clock rate is set exclusively. Parent clocks of master clock cannot be changed after a call to clk_set_rate_exclusive(). So the parent clock of SAI kernel clock must be set before. Ensure also that exclusive rate operations are balanced in STM32 SAI driver. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-10ASoC: Intel: kbl: fix wrong number of channelsTzung-Bi Shih
Fix wrong setting on number of channels. The context wants to set constraint to 2 channels instead of 4. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-10x86/perf/amd: Remove need to check "running" bit in NMI handlerLendacky, Thomas
Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 4.14.x- Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-10MAINTAINERS: Fix the I3C entryBoris Brezillon
There's no include/dt-bindings/i3c/ directory, remove this F: entry from the I3C file patterns. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Reported-by: Joe Perches <joe@perches.com> Fixes: 4f26d0666961 ("MAINTAINERS: Add myself as the I3C subsystem maintainer") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-04-10i3c: dw: Fix dw_i3c_master_disable controller by using correct maskVitor Soares
The controller was being disabled incorrectly. The correct way is to clear the DEV_CTRL_ENABLE bit. Fix this by clearing this bit. Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: <stable@vger.kernel.org> Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-04-10i3c: Fix the verification of random PIDVitor Soares
The validation of random PID should be done by checking the boardinfo->pid instead of info.pid which is empty. Doing the change the info struture declaration is no longer necessary. Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: <stable@vger.kernel.org> Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-04-10powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configsMichael Ellerman
The recent commit 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") removed our definition of MAX_PHYSMEM_BITS when SPARSEMEM is disabled. This inadvertently broke some 64-bit FLATMEM using configs with eg: arch/powerpc/include/asm/book3s/64/mmu-hash.h:584:6: error: "MAX_PHYSMEM_BITS" is not defined, evaluates to 0 #if (MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT) ^~~~~~~~~~~~~~~~ Fix it by making sure we define MAX_PHYSMEM_BITS for all 64-bit configs regardless of SPARSEMEM. Fixes: 8bc086899816 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Reported-by: Hugh Dickins <hughd@google.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-09Bluetooth: btusb: request wake pin with NOAUTOENBrian Norris
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq(). We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-09dt-bindings: clock: sifive: add FU540-C000 PRCI clock constantsPaul Walmsley
Add preprocessor macros for the important PRCI output clocks that are needed by both the FU540 PRCI driver and DT data. Details are available in the FU540 manual in Chapter 7 of https://static.dev.sifive.com/FU540-C000-v1.0.pdf Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-04-09Merge tag 'mips_fixes_5.1_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.
2019-04-09Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull misc fixes from Al Viro: "A few regression fixes from this cycle" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: use kmem_cache_free() instead of kfree() iov_iter: Fix build error without CONFIG_CRYPTO aio: Fix an error code in __io_submit_one()
2019-04-10power: supply: cpcap-battery: Fix division by zeroTony Lindgren
If called fast enough so samples do not increment, we can get division by zero in kernel: __div0 cpcap_battery_cc_raw_div cpcap_battery_get_property power_supply_get_property.part.1 power_supply_get_property power_supply_show_property power_supply_uevent Fixes: 874b2adbed12 ("power: supply: cpcap-battery: Add a battery driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-04-09net/mlx5e: Switch to Toeplitz RSS hash by defaultKonstantin Khlebnikov
Although XOR hash function can perform very well on some special use cases, to align with all drivers, mlx5 driver should use Toeplitz hash by default. Toeplitz is more stable for the general use case and it is more standard and reliable. On top of that, since XOR (MLX5_RX_HASH_FN_INVERTED_XOR8) gives only a repeated 8 bits pattern. When used for udp tunneling RSS source port manipulation it results in fixed source port, which will cause bad RSS spread. Fixes: 2be6967cdbc9 ("net/mlx5e: Support ETH_RSS_HASH_XOR") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09Revert "net/mlx5e: Enable reporting checksum unnecessary also for L3 packets"Or Gerlitz
This reverts commit b820e6fb0978f9c2ac438c199d2bb2f35950e9c9. Prior the commit we are reverting, checksum unnecessary was only set when both the L3 OK and L4 OK bits are set on the CQE. This caused packets of IP protocols such as SCTP which are not dealt by the current HW L4 parser (hence the L4 OK bit is not set, but the L4 header type none bit is set) to go through the checksum none code, where currently we wrongly report checksum unnecessary for them, a regression. Fix this by a revert. Note that on our usual track we report checksum complete, so the revert isn't expected to have any notable performance impact. Also, when we are not on the checksum complete track, the L4 protocols for which we report checksum none are not high performance ones, we will still report checksum unnecessary for UDP/TCP. Fixes: b820e6fb0978 ("net/mlx5e: Enable reporting checksum unnecessary also for L3 packets") Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Avi Urman <aviu@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: Protect against non-uplink representor for encapDmytro Linkin
TC encap offload is supported only for the physical uplink representor. Fail for non uplink representor. Fixes: 3e621b19b0bb ("net/mlx5e: Support TC encapsulation offloads with upper devices") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: Rx, Check ip headers sanitySaeed Mahameed
In the two places is_last_ethertype_ip is being called, the caller will be looking inside the ip header, to be safe, add ip{4,6} header sanity check. And return true only on valid ip headers, i.e: the whole header is contained in the linear part of the skb. Note: Such situation is very rare and hard to reproduce, since mlx5e allocates a large enough headroom to contain the largest header one can imagine. Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: Rx, Fixup skb checksum for packets with tail paddingSaeed Mahameed
When an ethernet frame with ip payload is padded, the padding octets are not covered by the hardware checksum. Prior to the cited commit, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, the kernel will try to trim the padding bytes and subtract their checksum from skb->csum. In this patch we fixup skb->csum for any ip packet with tail padding of any size, if any padding found. FCS case is just one special case of this general purpose patch, hence, it is removed. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: XDP, Avoid checksum complete when XDP prog is loadedSaeed Mahameed
XDP programs might change packets data contents which will make the reported skb checksum (checksum complete) invalid. When XDP programs are loaded/unloaded set/clear rx RQs MLX5E_RQ_STATE_NO_CSUM_COMPLETE flag. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: Use fail-safe channels reopen in tx reporter recoverEran Ben Elisha
When requested to recover from error, the tx reporter might open new channels and close the existing ones. Use safe channels switch flow in order to guarantee opened channels at the end of the recover flow. For this purpose, define mlx5e_safe_reopen_channels function and use it within those flows. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5e: Skip un-needed tx recover if interface state is downEran Ben Elisha
Skip recover operation if interface is in down state as TX objects are not open. This fixes a bug were the recover flow re-opened TX objects which were not opened before, leading to a possible memory leak at driver unload. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5: FPGA, tls, idr remove on flow deleteSaeed Mahameed
Flow is kfreed on mlx5_fpga_tls_del_flow but kept in the idr data structure, this is risky and can cause use-after-free, since the idr_remove is delayed until tls_send_teardown_cmd completion. Instead of delaying idr_remove, in this patch we do it on mlx5_fpga_tls_del_flow, before actually kfree(flow). Added synchronize_rcu before kfree(flow) Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09net/mlx5: FPGA, tls, hold rcu read lock a bit longerSaeed Mahameed
To avoid use-after-free, hold the rcu read lock until we are done copying flow data into the command buffer. Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-09Merge tag 'mac80211-for-davem-2019-04-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * iTXQ fixes from Felix * tracing fix - increase message length * fix SW_CRYPTO_CONTROL enforcement * WMM rule handling for regdomain intersection * max_interfaces in hwsim - reported by syzbot * clear private data in some more commands * a clang compiler warning fix I added a patch with two new (unused) macros for rate-limited printing to simplify getting the users into the tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09RISC-V: Add separate defconfig for 32bit systemsAnup Patel
This patch adds rv32_defconfig for 32bit systems. The only difference between rv32_defconfig and defconfig is that rv32_defconfig has CONFIG_ARCH_RV32I=y. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-04-09mac80211: Honor SW_CRYPTO_CONTROL for unicast keys in AP VLAN modeAlexander Wetzel
Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast keys, the original override was intended to be done for group keys as those are treated specially by mac80211 and would always have been rejected. Now the situation is that AP_VLAN support must be enabled by the driver if it can support it (meaning it can support software crypto GTK TX). Thus, also simplify the code - if we get here with AP_VLAN and non- pairwise key, software crypto must be used (driver doesn't know about the interface) and can be used (driver must've advertised AP_VLAN if it also uses SW_CRYPTO_CONTROL). Fixes: db3bdcb9c3ff ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-09drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phyWangyan Wang
This is the third step to make MT2701 HDMI stable. We should not change the rate of parent for hdmi phy when doing round_rate for this clock. The parent clock of hdmi phy must be the same as it. We change it when doing set_rate only. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
generated by cgit (git 2.34.1) at 2025-09-13 21:48:07 +0000