summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-14wifi: mac80211: Don't translate MLD addresses for multicastAndrei Otcheretianski
MLD address translation should be done only for individually addressed frames. Otherwise, AAD calculation would be wrong and the decryption would fail. Fixes: e66b7920aa5ac ("wifi: mac80211: fix initialization of rx->link and rx->link_sta") Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Link: https://lore.kernel.org/r/20230214101048.792414-1-andrei.otcheretianski@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: call reg_notifier for self managed wiphy from driver hintWen Gong
Currently the regulatory driver does not call the regulatory callback reg_notifier for self managed wiphys. Sometimes driver needs cfg80211 to calculate the info of ieee80211_channel such as flags and power, and driver needs to get the info of ieee80211_channel after hint of driver, but driver does not know when calculation of the info of ieee80211_channel become finished, so add notify to driver in reg_process_self_managed_hint() from cfg80211 is a good way, then driver could get the correct info in callback of reg_notifier. Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Link: https://lore.kernel.org/r/20230201065313.27203-1-quic_wgong@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notifyLorenzo Bianconi
Since cfg80211_bss_color_notify() is now always run in non-atomic context, get rid of gfp_t flags in the routine signature and always use GFP_KERNEL for netlink message allocation. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: Allow authentication frames and set keys on NAN interfaceVinay Gannevaram
Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake to authenticate the peer and generate keys. Hence allow to register and transmit the PASN authentication frames on NAN interface and set the keys to driver or underlying modules on NAN interface. The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN, which also helps userspace modules to know if the driver supports secure NAN. Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com> Link: https://lore.kernel.org/r/1675519179-24174-1-git-send-email-quic_vganneva@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: fix non-MLO station associationKarthikeyan Periyasamy
Non-MLO station frames are dropped in Rx path due to the condition check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario, non-MLO stations try to connect in any of the valid links in the ML AP, where the station valid_links and link_id params are valid in the ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always return false for the non-MLO stations by the assumption taken is valid_links and link_id are not valid in non-MLO stations object (ieee80211_sta), this assumption is wrong. Due to this assumption, non-MLO station frames are dropped which leads to failure in association. Fix it by removing the condition check and allow the link validation check for the non-MLO stations. Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://lore.kernel.org/r/20230206160330.1613-1-quic_periyasa@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: Allow NSS change only up to capabilityRameshkumar Sundaram
Stations can update bandwidth/NSS change in VHT action frame with action type Operating Mode Notification. (IEEE Std 802.11-2020 - 9.4.1.53 Operating Mode field) For Operating Mode Notification, an RX NSS change to a value greater than AP's maximum NSS should not be allowed. During fuzz testing, by forcefully sending VHT Op. mode notif. frames from STA with random rx_nss values, it is found that AP accepts rx_nss values greater that APs maximum NSS instead of discarding such NSS change. Hence allow NSS change only up to maximum NSS that is negotiated and capped to AP's capability during association. Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/20230207114146.10567-1-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDUFelix Fietkau
At least ath10k and ath11k supported hardware (maybe more) does not implement mesh A-MSDU aggregation in a standard compliant way. 802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the A-MSDU header (and little-endian). As such, its length must not be included in the subframe length field. Hardware affected by this bug treats the mesh control field as part of the MSDU data and sets the length accordingly. In order to avoid packet loss, keep track of which stations are affected by this and take it into account when converting A-MSDU to 802.3 + mesh control packets. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: fix receiving A-MSDU frames on mesh interfacesFelix Fietkau
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets on mesh interfaces, because it assumes that the Mesh Control field is always directly after the 802.11 header. 802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is actually part of the A-MSDU subframe header. This makes more sense, since it allows packets for multiple different destinations to be included in the same A-MSDU, as long as RA and TID are still the same. Another issue is the fact that the A-MSDU subframe length field was apparently accidentally defined as little-endian in the standard. In order to fix this, the mesh forwarding path needs happen at a different point in the receive path. ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field and leave it in after the ethernet header. This also affects the source/dest MAC address fields, which now in the case of mesh point to the mesh SA/DA. ieee80211_amsdu_to_8023s is changed to deal with the endian difference and to add the Mesh Control length to the subframe length, since it's not covered by the MSDU length field. With these changes, the mac80211 will get the same packet structure for converted regular data packets and unpacked A-MSDU subframes. The mesh forwarding checks are now only performed after the A-MSDU decap. For locally received packets, the Mesh Control header is stripped away. For forwarded packets, a new 802.11 header gets added. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name [fix fortify build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: remove mesh forwarding congestion checkFelix Fietkau
Now that all drivers use iTXQ, it does not make sense to check to drop tx forwarding packets when the driver has stopped the queues. fq_codel will take care of dropping packets when the queues fill up Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: factor out bridge tunnel / RFC1042 header checkFelix Fietkau
The same check is done in multiple places, unify it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: move A-MSDU check in ieee80211_data_to_8023_exthdrFelix Fietkau
When parsing the outer A-MSDU header, don't check for inner bridge tunnel or RFC1042 headers. This is handled by ieee80211_amsdu_to_8023s already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: make rate u32 in sta_set_rate_info_rx()Shayne Chen
The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to u16 after being assigned to rate variable, which causes information loss in STA_STATS_FIELD_TYPE and later bitfields. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14rfkill: Use sysfs_emit() to instead of sprintf()Bo Liu
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230206081641.3193-1-liubo03@inspur.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Allow action frames to be transmitted with link BSS in MLDRameshkumar Sundaram
Currently action frames TX only with ML address as A3(BSSID) are allowed in an ML AP, but TX for a non-ML Station can happen in any link of an ML BSS with link BSS address as A3. In case of an MLD, if User-space has provided a valid link_id in action frame TX request, allow transmission of the frame in that link. Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/20230201061602.3918-1-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: configure puncturing bitmapAloka Dixit
- Configure the bitmap in link_conf and notify the driver. - Modify 'change' in ieee80211_start_ap() from u32 to u64 to support BSS_CHANGED_EHT_PUNCTURING. - Propagate the bitmap in channel switch events to userspace. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-5-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: validate and configure puncturing bitmapAloka Dixit
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-3-quic_alokad@quicinc.com [move validation against 0xffff into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: move puncturing bitmap validation from mac80211Aloka Dixit
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap() and export it. - Modify the prototype to include struct cfg80211_chan_def instead of only bandwidth to support a check which returns false if the primary channel is punctured. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: return error message for malformed chandefJaewan Kim
Add an error message to the missing frequency case to have all -EINVAL in nl80211_parse_chandef() return a better error. Signed-off-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130074514.1560021-1-jaewan@google.com [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211_hwsim: Rename pid to portid to avoid confusionJaewan Kim
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming that hold port identifiers portid instead of pid. This change replicates following commit: commit 15e473046cb6 ("netlink: Rename pid to portid to avoid confusion") Signed-off-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130022252.1514647-1-jaewan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: add MLO_LINK_ID to CMD_STOP_AP eventAlvin Šipraga
nl80211_send_ap_stopped() can be called multiple times on the same netdev for each link when using Multi-Link Operation. Add the MLO_LINK_ID attribute to the event to allow userspace to distinguish which link the event is for. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-2-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: nl80211: emit CMD_START_AP on multicast group when an AP is startedAlvin Šipraga
Userspace processes such as network daemons may wish to be informed when any AP interface is brought up on the system, for example to initiate a (re)configuration of IP settings or to start a DHCP server. Currently nl80211 does not broadcast any such event on its multicast groups, leaving userspace only two options: 1. the process must be the one that actually issued the NL80211_CMD_START_AP request, so that it can react on the response to that request; 2. the process must react to RTM_NEWLINK events indicating a change in carrier state, and may query for further information about the AP and react accordingly. Option (1) is robust, but it does not cover all scenarios. It is easy to imagine a situation where this is not the case (e.g. hostapd + systemd-networkd). Option (2) is not robust, because RTM_NEWLINK events may be silently discarded by the linkwatch logic (cf. linkwatch_fire_event()). Concretely, consider a scenario in which the carrier state flip-flops in the following way: ^ carrier state (high/low = carrier/no carrier) | | _______ _______ ... | | | | | ______| "foo" |____| "bar" (SSID in "quotes") | +-------A-------B----C---------> time If the time interval between (A) and (C) is less than 1 second, then linkwatch may emit only a single RTM_NEWLINK event indicating carrier gain. This is problematic because it is possible that the network configuration that should be applied is a function of the AP's properties such as SSID (cf. SSID= in systemd.network(5)). As illustrated in the above diagram, it may be that the AP with SSID "bar" ends up being configured as though it had SSID "foo". Address the above issue by having nl80211 emit an NL80211_CMD_START_AP message on the MLME nl80211 multicast group. This allows for arbitrary processes to be reliably informed. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-1-alvin@pqrs.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: mlme: handle EHT channel puncturingJohannes Berg
Handle the Puncturing info received from the AP in the EHT Operation element in beacons. If the info is invalid: - during association: disable EHT connection for the AP - after association: disconnect This commit includes many (internal) bugfixes and spec updates various people. Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_new_sta() for MLD APVeerendranath Jakkam
Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-2-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: move color collision detection report in a delayed workLorenzo Bianconi
Move color collision report in a dedicated delayed work and do not run it in interrupt context in order to rate-limit the number of events reported to userspace. Moreover grab wdev mutex in ieee80211_color_collision_detection_work routine since it is required by cfg80211_obss_color_collision_notify(). Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Fixes: 5f9404abdf2a ("mac80211: add support for BSS color change") Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Fix use after free for wextAlexander Wetzel
Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work. Fixes: fffd0934b939 ("cfg80211: rework key operation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14s390: remove confusing comment from uapi types header fileHeiko Carstens
The comment for addr_t doesn't make too much sense. Given that also the formatting is incorrect, just remove it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14vfio/ccw: remove WARN_ON during shutdownEric Farman
The logic in vfio_ccw_sch_shutdown() always assumed that the input subchannel would point to a vfio_ccw_private struct, without checking that one exists. The blamed commit put in a check for this scenario, to prevent the possibility of a missing private. The trouble is that check was put alongside a WARN_ON(), presuming that such a scenario would be a cause for concern. But this can be triggered by binding a subchannel to vfio-ccw, and rebooting the system before starting the mdev (via "mdevctl start" or similar) or after stopping it. In those cases, shutdown doesn't need to worry because either the private was never allocated, or it was cleaned up by vfio_ccw_mdev_remove(). Remove the WARN_ON() piece of this check, since there are plausible scenarios where private would be NULL in this path. Fixes: 9e6f07cd1eaa ("vfio/ccw: create a parent struct") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20230210174227.2256424-1-farman@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/entry: remove toolchain dependent micro-optimizationHeiko Carstens
Get rid of CONFIG_AS_IS_LLVM in entry.S to make the code a bit more readable. This removes a micro-optimization, but given that the llvm IAS limitation will likely stay, just use the version that works with llvm. See commit 4c25f0ff6336 ("s390/entry: workaround llvm's IAS limitations") for further details. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mem_detect: do not truncate online memory ranges infoVasily Gorbik
Commit bf64f0517e5d ("s390/mem_detect: handle online memory limit just once") introduced truncation of mem_detect online ranges based on identity mapping size. For kdump case however the full set of online memory ranges has to be feed into memblock_physmem_add so that crashed system memory could be extracted. Instead of truncating introduce a "usable limit" which is respected by mem_detect api. Also add extra online memory ranges iterator which still provides full set of online memory ranges disregarding the "usable limit". Fixes: bf64f0517e5d ("s390/mem_detect: handle online memory limit just once") Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/vx: remove __uint128_t type from __vector128 struct againHeiko Carstens
The __uint128_t member was only added for future convenience to the __vector128 struct. However this is a uapi header file, 31/32 bit (aka compat layer) is still supported, but doesn't know anything about this type: /usr/include/asm/types.h:27:17: error: unknown type name __uint128_t 27 | __uint128_t v; Therefore remove it again. Fixes: b0b7b43fcc46 ("s390/vx: add 64 and 128 bit members to __vector128 struct") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mm: add support for RDP (Reset DAT-Protection)Gerald Schaefer
RDP instruction allows to reset DAT-protection bit in a PTE, with less CPU synchronization overhead than IPTE instruction. In particular, IPTE can cause machine-wide synchronization overhead, and excessive IPTE usage can negatively impact machine performance. RDP can be used instead of IPTE, if the new PTE only differs in SW bits and _PAGE_PROTECT HW bit, for PTE protection changes from RO to RW. SW PTE bit changes are allowed, e.g. for dirty and young tracking, but none of the other HW-defined part of the PTE must change. This is because the architecture forbids such changes to an active and valid PTE, which is why invalidation with IPTE is always used first, before writing a new entry. The RDP optimization helps mainly for fault-driven SW dirty-bit tracking. Writable PTEs are initially always mapped with HW _PAGE_PROTECT bit set, to allow SW dirty-bit accounting on first write protection fault, where the DAT-protection would then be reset. The reset is now done with RDP instead of IPTE, if RDP instruction is available. RDP cannot always guarantee that the DAT-protection reset is propagated to all CPUs immediately. This means that spurious TLB protection faults on other CPUs can now occur. For this, common code provides a flush_tlb_fix_spurious_fault() handler, which will now be used to do a CPU-local TLB flush. However, this will clear the whole TLB of a CPU, and not just the affected entry. For more fine-grained flushing, by simply doing a (local) RDP again, flush_tlb_fix_spurious_fault() would need to also provide the PTE pointer. Note that spurious TLB protection faults cannot really be distinguished from racing pagetable updates, where another thread already installed the correct PTE. In such a case, the local TLB flush would be unnecessary overhead, but overall reduction of CPU synchronization overhead by not using IPTE is still expected to be beneficial. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mm: define private VM_FAULT_* reasons from top bitsPeter Xu
The current definition already collapse with the generic definition of vm_fault_reason. Move the private definitions to allocate bits from the top of uint so they won't collapse anymore. Signed-off-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20230205231704.909536-4-peterx@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.Andy Chi
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to make mic-mute/audio-mute working. Signed-off-by: Andy Chi <andy.chi@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230214035853.31217-1-andy.chi@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-14alarmtimer: Prevent starvation by small intervals and SIG_IGNThomas Gleixner
syzbot reported a RCU stall which is caused by setting up an alarmtimer with a very small interval and ignoring the signal. The reproducer arms the alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a problem per se, but that's an issue when the signal is ignored because then the timer is immediately rearmed because there is no way to delay that rearming to the signal delivery path. See posix_timer_fn() and commit 58229a189942 ("posix-timers: Prevent softirq starvation by small intervals and SIG_IGN") for details. The reproducer does not set SIG_IGN explicitely, but it sets up the timers signal with SIGCONT. That has the same effect as explicitely setting SIG_IGN for a signal as SIGCONT is ignored if there is no handler set and the task is not ptraced. The log clearly shows that: [pid 5102] --- SIGCONT {si_signo=SIGCONT, si_code=SI_TIMER, si_timerid=0, si_overrun=316014, si_int=0, si_ptr=NULL} --- It works because the tasks are traced and therefore the signal is queued so the tracer can see it, which delays the restart of the timer to the signal delivery path. But then the tracer is killed: [pid 5087] kill(-5102, SIGKILL <unfinished ...> ... ./strace-static-x86_64: Process 5107 detached and after it's gone the stall can be observed: syzkaller login: [ 79.439102][ C0] hrtimer: interrupt took 68471 ns [ 184.460538][ C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: ... [ 184.658237][ C1] rcu: Stack dump where RCU GP kthread last ran: [ 184.664574][ C1] Sending NMI from CPU 1 to CPUs 0: [ 184.669821][ C0] NMI backtrace for cpu 0 [ 184.669831][ C0] CPU: 0 PID: 5108 Comm: syz-executor192 Not tainted 6.2.0-rc6-next-20230203-syzkaller #0 ... [ 184.670036][ C0] Call Trace: [ 184.670041][ C0] <IRQ> [ 184.670045][ C0] alarmtimer_fired+0x327/0x670 posix_timer_fn() prevents that by checking whether the interval for timers which have the signal ignored is smaller than a jiffie and artifically delay it by shifting the next expiry out by a jiffie. That's accurate vs. the overrun accounting, but slightly inaccurate vs. timer_gettimer(2). The comment in that function says what needs to be done and there was a fix available for the regular userspace induced SIG_IGN mechanism, but that did not work due to the implicit ignore for SIGCONT and similar signals. This needs to be worked on, but for now the only available workaround is to do exactly what posix_timer_fn() does: Increase the interval of self-rearming timers, which have their signal ignored, to at least a jiffie. Interestingly this has been fixed before via commit ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals") already, but that fix got lost in a later rework. Reported-by: syzbot+b9564ba6e8e00694511b@syzkaller.appspotmail.com Fixes: f2c45807d399 ("alarmtimer: Switch over to generic set/get/rearm routine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <jstultz@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87k00q1no2.ffs@tglx
2023-02-14wifi: cfg80211: Authentication offload to user space for MLO connection in ↵Veerendranath Jakkam
STA mode Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14Merge branch 'add-support-for-per-action-hw-stats'Paolo Abeni
Oz Shlomo says: ==================== add support for per action hw stats There are currently two mechanisms for populating hardware stats: 1. Using flow_offload api to query the flow's statistics. The api assumes that the same stats values apply to all the flow's actions. This assumption breaks when action drops or jumps over following actions. 2. Using hw_action api to query specific action stats via a driver callback method. This api assures the correct action stats for the offloaded action, however, it does not apply to the rest of the actions in the flow's actions array, as elaborated below. The current hw_action api does not apply to the following use cases: 1. Actions that are implicitly created by filters (aka bind actions). In the following example only one counter will apply to the rule: tc filter add dev $DEV prio 2 protocol ip parent ffff: \ flower ip_proto tcp dst_ip $IP2 \ action police rate 1mbit burst 100k conform-exceed drop/pipe \ action mirred egress redirect dev $DEV2 2. Action preceding a hw action. In the following example the same flow stats will apply to the sample and mirred actions: tc action add police rate 1mbit burst 100k conform-exceed drop / pipe tc filter add dev $DEV prio 2 protocol ip parent ffff: \ flower ip_proto tcp dst_ip $IP2 \ action sample rate 1 group 10 trunc 60 pipe \ action police index 1 \ action mirred egress redirect dev $DEV2 3. Meter action using jump control. In the following example the same flow stats will apply to both mirred actions: tc action add police rate 1mbit burst 100k conform-exceed jump 2 / pipe tc filter add dev $DEV prio 2 protocol ip parent ffff: \ flower ip_proto tcp dst_ip $IP2 \ action police index 1 \ action mirred egress redirect dev $DEV2 action mirred egress redirect dev $DEV3 This series provides the platform to query per action stats for in_hw flows. The first four patches are preparation patches with no functionality change. The fifth patch re-uses the existing flow action stats api to query action stats for both classifier and action dumps. The rest of the patches add per action stats support to the Mellanox driver. ==================== Link: https://lore.kernel.org/r/20230212132520.12571-1-ozsh@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/mlx5e: TC, support per action statsOz Shlomo
Extend the action stats callback implementation to update stats for actions that are associated with hw counters. Note that the callback may be called from tc action utility or from tc flower. Both apis expect the driver to return the stats difference from the last update. As such, query the raw counter value and maintain the diff from the last api call in the tc layer, instead of the fs_core layer. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/mlx5e: TC, map tc action cookie to a hw counterOz Shlomo
Currently a hardware counter is associated with a flow cookie. This does not apply to flows using branching action which are required to return per action stats. A single counter may apply to multiple actions. Scan the flow actions in reverse (from the last to the first action) while caching the last counter. Associate all the flow attribute tc action cookies with the current cached counter. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/mlx5e: TC, store tc action cookies per attrOz Shlomo
The tc parse action phase translates the tc actions to mlx5 flow attributes data structure that is used during the flow offload phase. Currently, the flow offload stage instantiates hw counters while associating them to flow cookie. However, flows with branching actions are required to associate a hardware counter with its action cookies. Store the parsed tc action cookies on the flow attribute. Use the list of cookies in the next patch to associate a tc action cookie with its allocated hw counter. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/mlx5e: TC, add hw counter to branching actionsOz Shlomo
Currently a hw count action is appended to the last action of the action list. However, a branching action may terminate the action list before reaching the last action. Append a count action to a branching action. In the next patches, filters with branching actions will read this counter when reporting stats per action. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: support per action hw statsOz Shlomo
There are currently two mechanisms for populating hardware stats: 1. Using flow_offload api to query the flow's statistics. The api assumes that the same stats values apply to all the flow's actions. This assumption breaks when action drops or jumps over following actions. 2. Using hw_action api to query specific action stats via a driver callback method. This api assures the correct action stats for the offloaded action, however, it does not apply to the rest of the actions in the flow's actions array. Extend the flow_offload stats callback to indicate that a per action stats update is required. Use the existing flow_offload_action api to query the action's hw stats. In addition, currently the tc action stats utility only updates hw actions. Reuse the existing action stats cb infrastructure to query any action stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: introduce flow_offload action cookieOz Shlomo
Currently a hardware action is uniquely identified by the <id, hw_index> tuple. However, the id is set by the flow_act_setup callback and tc core cannot enforce this, and it is possible that a future change could break this. In addition, <id, hw_index> are not unique across network namespaces. Uniquely identify the action by setting an action cookie by the tc core. Use the unique action cookie to query the action's hardware stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: pass flow_stats instead of multiple stats argsOz Shlomo
Instead of passing 6 stats related args, pass the flow_stats. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: act_pedit, setup offload action for action stats queryOz Shlomo
A single tc pedit action may be translated to multiple flow_offload actions. Offload only actions that translate to a single pedit command value. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14net/sched: optimize action stats api callsOz Shlomo
Currently the hw action stats update is called from tcf_exts_hw_stats_update, when a tc filter is dumped, and from tcf_action_copy_stats, when a hw action is dumped. However, the tcf_action_copy_stats is also called from tcf_action_dump. As such, the hw action stats update cb is called 3 times for every tc flower filter dump. Move the tc action hw stats update from tcf_action_copy_stats to tcf_dump_walker to update the hw action stats when tc action is dumped. Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14wifi: cfg80211: trace: remove MAC_PR_{FMT,ARG}Johannes Berg
With %pM, this really is no longer needed, and actually longer to spell out. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14dt-bindings: net: dsa: mediatek,mt7530: improve binding descriptionArınç ÜNAL
Fix inaccurate information about PHY muxing, and merge standalone and multi-chip module MT7530 configuration methods. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14x86/mtrr: Revert 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR ↵Juergen Gross
disabled case") Commit 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case") broke the use case of running Xen dom0 kernels on machines with an external disk enclosure attached via USB, see Link tag. What this commit was originally fixing - SEV-SNP guests on Hyper-V - is a more specialized situation which has other issues at the moment anyway so reverting this now and addressing the issue properly later is the prudent thing to do. So revert it in time for the 6.2 proper release. [ bp: Rewrite commit message. ] Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de
generated by cgit (git 2.34.1) at 2025-09-14 16:33:39 +0000