summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-08arm64: tegra: Add missing Smaug revisionAlexandre Courbot
The "google,smaug-rev2" string is missing from the compatible list of Smaug's DT. The differences of rev2 are not relevant at our current level of support and it boots just fine, so add it. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-12-08arm64: tegra: Add VDD_GPU regulator to Jetson TX1Alexandre Courbot
Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson TX1 board. This addition allows the GPU to be used provided the bootloader properly enabled the GPU node. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> [as pointed out by Thierry on IRC, nobody has reported a bug in the field, but using a new bootloader with a .dtb that has the incorrect data, it will crash on boot] Fixes: 336f79c7b6d7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support") Cc: stable@vger.kernel.org #v4.5+ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-12-07scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devicesXose Vazquez Perez
NetApp did confirm this is not required. Cc: Martin George <Martin.George@netapp.com> Cc: Robert Stankey <Robert.Stankey@netapp.com> Cc: Steven Schremmer <Steven.Schremmer@netapp.com> Cc: Sean Stewart <Sean.Stewart@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by: Sean Stewart <sean.stewart@netapp.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-07PCI: pciehp: Prioritize data-link event over presence detectAshok Raj
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: rcar: Add gen3 fallback compatibility string for pcie-rcarSimon Horman
Add fallback compatibility string for the R-Car Gen 3 family. This is in keeping with the both the existing fallback compatibility string for the R-Car Gen 2 family and the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rcar: Use gen2 fallback compatibility lastSimon Horman
Improve readability by listing fallback compatibility strings after the more-specific compatibility strings they provide a fallback for. This does not affect run-time behaviour as it is the order in the DTB that determines which compatibility string is used. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rcar-gen2: Use gen2 fallback compatibility lastSimon Horman
Improve readability by listing fallback compatibility strings after the more-specific compatibility strings they provide a fallback for. This does not affect run-time behaviour as it is the order in the DTB that determines which compatibility string is used. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07vfs: fix put_compat_statfs64() does not handle errorsLi Wang
put_compat_statfs64() does NOT return -1 and setting errno to EOVERFLOW when some variables(like: f_bsize) overflowed in the returned struct. The reason is that the ubuf->f_blocks is __u64 type, it couldn't be 4bits as the judgement in put_comat_statfs64(). Here correct the __u32 variables(in struct compat_statfs64) for comparison. reproducer: step1. mount hugetlbfs with two different pagesize on ppc64 arch. $ hugeadm --pool-pages-max 16M:0 $ hugeadm --create-mount $ mount | grep -i hugetlbfs none on /var/lib/hugetlbfs/pagesize-16MB type hugetlbfs (rw,relatime,seclabel,pagesize=16777216) none on /var/lib/hugetlbfs/pagesize-16GB type hugetlbfs (rw,relatime,seclabel,pagesize=17179869184) step2. compile & run this C program. $ cat statfs64_test.c #define _LARGEFILE64_SOURCE #include <stdio.h> #include <sys/syscall.h> #include <sys/statfs.h> int main() { struct statfs64 sb; int err; err = syscall(SYS_statfs64, "/var/lib/hugetlbfs/pagesize-16GB", sizeof(sb), &sb); if (err) return -1; printf("sizeof f_bsize = %d, f_bsize=%ld\n", sizeof(sb.f_bsize), sb.f_bsize); return 0; } $ gcc -m32 statfs64_test.c $ ./a.out sizeof f_bsize = 4, f_bsize=0 Signed-off-by: Li Wang <liwang@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-07f2fs: free meta pages if sanity check for ckpt is failedJaegeuk Kim
This fixes missing freeing meta pages in the error case. Tested-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-12-07f2fs: detect wrong layoutJaegeuk Kim
Previous mkfs.f2fs allows small partition inappropriately, so f2fs should detect that as well. Refer this in f2fs-tools. mkfs.f2fs: detect small partition by overprovision ratio and # of segments Reported-and-Tested-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-12-07libata-scsi: disable SCT Write Same for the momentNicolai Stange
SCT Write Same support had been introduced with commit 7b2030942859 ("libata: Add support for SCT Write Same") Some problems, namely excessive userspace segfaults, had been reported at http://lkml.kernel.org/r/20160908192736.GA4356@gmail.com This lead to commit 0ce1b18c42a5 ("libata: Some drives failing on SCT Write Same") which strived to disable SCT Write Same on !ZAC devices. Due to the way this was done and to the logic in sd_config_write_same(), this didn't work for those devices that have ->max_ws_blocks > SD_MAX_WS10_BLOCKS: for these, ->no_write_same and ->max_write_same_sectors would still be non-zero, but ->ws10 == ->ws16 == 0. This would cause sd_setup_write_same_cmnd() to demultiplex REQ_OP_WRITE_SAME requests to WRITE_SAME, and these in turn aren't supported by libata-scsi: EXT4-fs (dm-1): Delayed block allocation failed for inode 2625094 at logical offset 2032 with max blocks 2 with error 121 EXT4-fs (dm-1): This should not happen!! Data will be lost 121 == EREMOTEIO is what scsi_io_completion() asserts in case of invalid opcodes. Back to the original problem of userspace segfaults: this can be tracked down to ata_format_sct_write_same() overwriting the input page. Sometimes, this page is ZERO_PAGE(0) which ceases to be filled with zeros from that point on. Since ZERO_PAGE(0) is used for userspace .bss mappings, code of the following is doomed: static char *a = NULL; /* .bss */ ... if (a) *a = 'a'; This problem is not solved by disabling SCT Write Same for !ZAC devices only. It can certainly be fixed, but the final release is quite close -- so disable SCT Write Same for all ATA devices rather than introducing some SCT key buffer allocation schemes at this point. Fixes: 7b2030942859 ("libata: Add support for SCT Write Same") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-07arm/xen: Use alloc_percpu rather than __alloc_percpuJulien Grall
The function xen_guest_init is using __alloc_percpu with an alignment which are not power of two. However, the percpu allocator never supported alignments which are not power of two and has always behaved incorectly in thise case. Commit 3ca45a4 "percpu: ensure requested alignment is power of two" introduced a check which trigger a warning [1] when booting linux-next on Xen. But in reality this bug was always present. This can be fixed by replacing the call to __alloc_percpu with alloc_percpu. The latter will use an alignment which are a power of two. [1] [ 0.023921] illegal size (48) or align (48) for percpu allocation [ 0.024167] ------------[ cut here ]------------ [ 0.024344] WARNING: CPU: 0 PID: 1 at linux/mm/percpu.c:892 pcpu_alloc+0x88/0x6c0 [ 0.024584] Modules linked in: [ 0.024708] [ 0.024804] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7-next-20161128 #473 [ 0.025012] Hardware name: Foundation-v8A (DT) [ 0.025162] task: ffff80003d870000 task.stack: ffff80003d844000 [ 0.025351] PC is at pcpu_alloc+0x88/0x6c0 [ 0.025490] LR is at pcpu_alloc+0x88/0x6c0 [ 0.025624] pc : [<ffff00000818e678>] lr : [<ffff00000818e678>] pstate: 60000045 [ 0.025830] sp : ffff80003d847cd0 [ 0.025946] x29: ffff80003d847cd0 x28: 0000000000000000 [ 0.026147] x27: 0000000000000000 x26: 0000000000000000 [ 0.026348] x25: 0000000000000000 x24: 0000000000000000 [ 0.026549] x23: 0000000000000000 x22: 00000000024000c0 [ 0.026752] x21: ffff000008e97000 x20: 0000000000000000 [ 0.026953] x19: 0000000000000030 x18: 0000000000000010 [ 0.027155] x17: 0000000000000a3f x16: 00000000deadbeef [ 0.027357] x15: 0000000000000006 x14: ffff000088f79c3f [ 0.027573] x13: ffff000008f79c4d x12: 0000000000000041 [ 0.027782] x11: 0000000000000006 x10: 0000000000000042 [ 0.027995] x9 : ffff80003d847a40 x8 : 6f697461636f6c6c [ 0.028208] x7 : 6120757063726570 x6 : ffff000008f79c84 [ 0.028419] x5 : 0000000000000005 x4 : 0000000000000000 [ 0.028628] x3 : 0000000000000000 x2 : 000000000000017f [ 0.028840] x1 : ffff80003d870000 x0 : 0000000000000035 [ 0.029056] [ 0.029152] ---[ end trace 0000000000000000 ]--- [ 0.029297] Call trace: [ 0.029403] Exception stack(0xffff80003d847b00 to 0xffff80003d847c30) [ 0.029621] 7b00: 0000000000000030 0001000000000000 ffff80003d847cd0 ffff00000818e678 [ 0.029901] 7b20: 0000000000000002 0000000000000004 ffff000008f7c060 0000000000000035 [ 0.030153] 7b40: ffff000008f79000 ffff000008c4cd88 ffff80003d847bf0 ffff000008101778 [ 0.030402] 7b60: 0000000000000030 0000000000000000 ffff000008e97000 00000000024000c0 [ 0.030647] 7b80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.030895] 7ba0: 0000000000000035 ffff80003d870000 000000000000017f 0000000000000000 [ 0.031144] 7bc0: 0000000000000000 0000000000000005 ffff000008f79c84 6120757063726570 [ 0.031394] 7be0: 6f697461636f6c6c ffff80003d847a40 0000000000000042 0000000000000006 [ 0.031643] 7c00: 0000000000000041 ffff000008f79c4d ffff000088f79c3f 0000000000000006 [ 0.031877] 7c20: 00000000deadbeef 0000000000000a3f [ 0.032051] [<ffff00000818e678>] pcpu_alloc+0x88/0x6c0 [ 0.032229] [<ffff00000818ece8>] __alloc_percpu+0x18/0x20 [ 0.032409] [<ffff000008d9606c>] xen_guest_init+0x174/0x2f4 [ 0.032591] [<ffff0000080830f8>] do_one_initcall+0x38/0x130 [ 0.032783] [<ffff000008d90c34>] kernel_init_freeable+0xe0/0x248 [ 0.032995] [<ffff00000899a890>] kernel_init+0x10/0x100 [ 0.033172] [<ffff000008082ec0>] ret_from_fork+0x10/0x50 Reported-by: Wei Chen <wei.chen@arm.com> Link: https://lkml.org/lkml/2016/11/28/669 Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Cc: stable@vger.kernel.org
2016-12-07PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init()Shawn Lin
Move deassert of pm/aclk/pclk after phy_init() as we want to optimize the logic of reset control and reuse rockchip_pcie_init_port() later which should fully follow the cold boot procedure of ROM code. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org>
2016-12-07PCI: rockchip: Split out rockchip_cfg_atu()Shawn Lin
Split out a new function, rockchip_cfg_atu(), in order to re-configure the ATU when missing these information after wakeup from S3. [bhelgaas: add "dev" temporary, return 0 when known] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org>
2016-12-07PCI: rockchip: Clean up bit definitions for PCIE_RC_CONFIG_LCSShawn Lin
PCIE_RC_CONFIG_LCS contains control and status bits specific to the PCIe link. The layout for this register looks the same as the existing PCI_EXP_LNKCTL and PCI_EXP_LNKSTA. So let's reuse them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Correct the use of FTS maskBrian Norris
We're trying to mask out bits[23:8] while retaining [32:24, 7:0], but we're doing the inverse. That doesn't have too much effect, since we're setting all the [23:8] bits to 1, and the other bits are only relevant for modes we're currently not using. But we should get this right. Fixes: ca1989084054 ("PCI: rockchip: Fix wrong transmitted FTS count") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2016-12-07PCI: rockchip: Remove the pointer to L1 substate capShawn Lin
Per the errata of TRM, the RC can't support L1 substate, so remove the L1 substate cap as well as operation for PCIE_RC_CONFIG_L1_SUBSTATE_CTRL2. Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Specify the link capabilityShawn Lin
rk3399 supports PCIe 2.x link speeds marginally at best, and on some boards, the link won't train at 5 GT/s at all. Rather than sacrifice 500ms waiting for training that will never happen, let's use the helper function, of_pci_get_max_link_speed(), to get the max link speed from DT and specify link capability. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Fix negotiated lanes calculationShawn Lin
The calculation of negotiated lanes is wrong: it should be shifted by PCIE_CORE_PL_CONF_LANE_SHIFT, but it is shifted by PCIE_CORE_PL_CONF_LANE_MASK instead. Let's fix it. Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Add Kconfig COMPILE_TESTShawn Lin
Allow selection of the Rockchip driver for compile testing, even if we aren't building for ARCH_ROCKCHIP. [bhelgaas: changelog] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Mark RC as common clock architectureShawn Lin
The default value of common clock configuration is zero indicating Rockchip's RC is using asynchronous clock architecture but actually we are using common clock. This will confuse some EP drivers if they need some different settings referring to this value. Set the Common Clock Configuration bit in the Link Control Register. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: rockchip: Provide captured slot power limit and scaleShawn Lin
If vpcie3v3 is available, we could provide these information via RC's configure register to make EP able to know the power limit. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07ARM: dts: imx7d: fix LCDIF clock assignmentStefan Agner
The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them separately: Clock Clock Root Description apb_clk MAIN_AXI_CLK_ROOT AXI clock pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock All of them are switched by a single gate, which is part of the IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for the AXI bus clock (clock-name "axi") makes sure the gate gets enabled when accessing registers. There seem to be no separate AXI display clock, and the clock is optional. Hence remove the dummy clock. This fixes kernel freezes when starting the X-Server (which disables/re-enables the display controller). Fixes: e8ed73f691bd ("ARM: dts: imx7d: add lcdif support") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07dts: sun8i-h3: correct UART3 pin definitionsJorik Jonker
In a previous commit, I made a copy/paste error in the pinmux definitions of UART3: PG{13,14} instead of PA{13,14}. This commit takes care of that. I have tested this commit on Orange Pi PC and Orange Pi Plus, and it works for these boards. Fixes: e3d11d3c45c5 ("dts: sun8i-h3: add pinmux definitions for UART2-3") Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07Merge tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
next/dt arm: Xilinx Zynq dt patches for v4.10 - Remove skeleton.dtsi - Fix DTC warnings - Coding style changes - Microzed support * tag 'zynq-dt-for-4.10' of https://github.com/Xilinx/linux-xlnx: arm: dts: zynq: Add MicroZed board support ARM: zynq: Fix pmu register description coding style ARM: zynq: Fix W=1 dtc 1.4 warnings ARM: zynq: Remove skeleton.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07Merge tag 'zynq-soc-for-4.10' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
next/soc arm: Xilinx Zynq patches for v4.10 - Fix dma issue * tag 'zynq-soc-for-4.10' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Reserve correct amount of non-DMA RAM Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07Merge tag 'davinci-for-v4.10/defconfig-4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Enable support for MUSB based USB OTG on DA850. * tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable da8xx usb otg Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategyBjorn Helgaas
Add Makefile comments to explain the Kconfig and build strategy for ARM64 drivers that work around not-quite-ECAM issues. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07Merge tag 'davinci-for-v4.10/dt-4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt - Add device tree nodes for pin pull-up/pull-down bias control on DA850. - Enable high speed support on DA850 MMC/SD * tag 'davinci-for-v4.10/dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07arm64: dts: zte: clean up gic-v3 redistributor propertiesShawn Guo
The gic-v3 property redistributor-stride is only meant as a workaround for broken platforms that have a redistributor stride deviating what the architecture defines, i.e. 128KiB for GICv3, 256KiB for GICv4. This is not the case for ZX296718, and redistributor-stride is not really necessary. Let's drop it. Also, #redistributor-regions is only required when there is more than one such region is present. Let's remove it as well. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07arm64: dts: zx: Fix gic GICR propertyJun Nie
GICR for multiple CPU can be described with start address and stride, or with multiple address. Current multiple address and stride are both used. Fix it. vmalloc patch 727a7f5a9 triggered this bug: [ 0.097146] Unable to handle kernel paging request at virtual address ffff000008060008 [ 0.097150] pgd = ffff000008602000 [ 0.097160] [ffff000008060008] *pgd=000000007fffe003, *pud=000000007fffd003, *pmd=000000007fffc003, *pte=0000000000000000 [ 0.097165] Internal error: Oops: 96000007 [#1] PREEMPT SMP [ 0.097170] Modules linked in: [ 0.097177] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0+ #1474 [ 0.097179] Hardware name: ZTE zx296718 evaluation board (DT) [ 0.097183] task: ffff80003e8c8b80 task.stack: ffff80003e8d0000 [ 0.097197] PC is at gic_populate_rdist+0x74/0x15c [ 0.097202] LR is at gic_starting_cpu+0xc/0x20 [ 0.097206] pc : [<ffff0000082b1b18>] lr : [<ffff0000082b26e0>] pstate: 600001c5 Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-07PCI: spear: Use builtin_platform_driver() to simplify the codeGeliang Tang
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: a core dumping crash fix, a guess-unwinder regression fix, plus three build warning fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind: Fix guess-unwinder regression x86/build: Annotate die() with noreturn to fix build warning on clang x86/platform/olpc: Fix resume handler build warning x86/apic/uv: Silence a shift wrapping warning x86/coredump: Always use user_regs_struct for compat_elf_gregset_t
2016-12-07Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "An autogroup nice level adjustment bug fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix 64-bit kernel nice level adjustment
2016-12-07Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A bogus warning fix, a counter width handling fix affecting certain machines, plus a oneliner hw-enablement patch for Knights Mill CPUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove invalid warning from list_update_cgroup_even()t perf/x86: Fix full width counter, counter overflow perf/x86/intel: Enable C-state residency events for Knights Mill
2016-12-07Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two rtmutex race fixes (which miraculously never triggered, that we know of), plus two lockdep printk formatting regression fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix report formatting locking/rtmutex: Use READ_ONCE() in rt_mutex_owner() locking/rtmutex: Prevent dequeue vs. unlock race locking/selftest: Fix output since KERN_CONT changes
2016-12-07Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "A single late breaking fix for objtool" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix bytes check of lea's rex_prefix
2016-12-07pNFS: Layoutreturn must free the layout after the layout-private dataTrond Myklebust
The layout-private data may depend on the layout and/or the inode still existing when it does post-processing and frees its data, so we need to free them after calling lrp->ld_private.ops->free(). This fixes a mirror list corruption issue in the flexfiles driver. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-07pNFS/flexfiles: Fix ff_layout_add_ds_error_locked()Trond Myklebust
When we're merging an old entry into our new entry, we want to ensure that we add the list entry in the correct place. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-07NFSv4: Add missing nfs_put_lock_context()NeilBrown
Otherwise the lock context won't be freed when we're done with it. From: NeilBrown <neilb@suse.com> Fixes: 5bd3f817 ("NFSv4: change nfs4_select_rw_stateid to take a lock_context inplace of lock_owner") Signed-off-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-07dummy: expend mtu range for dummy deviceZhang Shengju
After commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), the mtu range for dummy device becomes [68, 1500]. This patch extends it to [0, 65535]. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07nlmon: use core MTU range checking in nlmon driverZhang Shengju
Since commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), mtu range is checked at dev_set_mtu(). This patch adds min_mtu for nlmon device and remove unnecessary ndo_change_mtu() function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07phy: Don't increment MDIO bus refcount unless it's a different ownerFlorian Fainelli
Commit 3e3aaf649416 ("phy: fix mdiobus module safety") fixed the way we dealt with MDIO bus module reference count, but sort of introduced a regression in that, if an Ethernet driver registers its own MDIO bus driver, as is common, we will end up with the Ethernet driver's module->refnct set to 1, thus preventing this driver from any removal. Fix this by comparing the network device's device driver owner against the MDIO bus driver owner, and only if they are different, increment the MDIO bus module refcount. Fixes: 3e3aaf649416 ("phy: fix mdiobus module safety") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07driver: macvlan: Remove the rcu member of macvlan_portGao Feng
When free macvlan_port in macvlan_port_destroy, it is safe to free directly because netdev_rx_handler_unregister could enforce one grace period. So it is unnecessary to use kfree_rcu for macvlan_port. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07driver: ipvlan: Free ipvl_port directly with kfree instead of kfree_rcuGao Feng
There are two functions which would free the ipvl_port now. The first is ipvlan_port_create. It frees the ipvl_port in the error handler, so it could kfree it directly. The second is ipvlan_port_destroy. It invokes netdev_rx_handler_unregister which enforces one grace period by synchronize_net firstly, so it also could kfree the ipvl_port directly and safely. So it is unnecessary to use kfree_rcu to free ipvl_port. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07PCI: vmd: Fix suspend handlers defined-but-not-used warningBorislav Petkov
Fix the following warnings: drivers/pci/host/vmd.c:731:12: warning: ‘vmd_suspend’ defined but not used [-Wunused-function] static int vmd_suspend(struct device *dev) ^ drivers/pci/host/vmd.c:739:12: warning: ‘vmd_resume’ defined but not used [-Wunused-function] static int vmd_resume(struct device *dev) ^ Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCUJon Derrick
SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07Merge tag 'perf-core-for-mingo-20161207' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: Improvements: - Improve error message when analyzing file with required events in 'perf sched timehist' (David Ahern) Fixes: - Force fixdep compilation to be done at the start of the build, fixing some build race conditions in high core count machines (Jiri Olsa) - Fix handling a zero sample->tid in 'perf sched timehist', as sometimes that isn't the idle thread (Namhyung Kim) Infrastructure changes: - Check minimal accepted LLVM version in its feature check, 3.9 at this time (Wang Nan) Documentation changes: - Explicitly document that --children is enabled by default (Yannick Brosseau) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-07bpf: fix loading of BPF_MAXINSNS sized programsDaniel Borkmann
General assumption is that single program can hold up to BPF_MAXINSNS, that is, 4096 number of instructions. It is the case with cBPF and that limit was carried over to eBPF. When recently testing digest, I noticed that it's actually not possible to feed 4096 instructions via bpf(2). The check for > BPF_MAXINSNS was added back then to bpf_check() in cbd357008604 ("bpf: verifier (add ability to receive verification log)"). However, 09756af46893 ("bpf: expand BPF syscall with program load/unload") added yet another check that comes before that into bpf_prog_load(), but this time bails out already in case of >= BPF_MAXINSNS. Fix it up and perform the check early in bpf_prog_load(), so we can drop the second one in bpf_check(). It makes sense, because also a 0 insn program is useless and we don't want to waste any resources doing work up to bpf_check() point. The existing bpf(2) man page documents E2BIG as the official error for such cases, so just stick with it as well. Fixes: 09756af46893 ("bpf: expand BPF syscall with program load/unload") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07netvsc: reduce maximum GSO sizestephen hemminger
Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-21 05:20:14 +0000