Age | Commit message (Collapse) | Author |
|
There is a spelling mistake in a pr_warn message. Fix it.
Link: https://lkml.kernel.org/r/20250418120331.535086-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Right now test_kmod has hardcoded dependencies on btrfs/xfs. That is not
optimal since you end up needing to select/build them, but it is not
really required since other fs could be selected for the testing. Also,
we can't change the default/driver module used for testing on
initialization.
Thus make it more generic: introduce two module parameters (start_driver
and start_test_fs), which allow to select which modules/fs to use for the
testing on test_kmod initialization. Then it's up to the user to select
which modules/fs to use for testing based on his config. However, keep
test_module as required default.
This way, config/modules becomes selectable as when the testing is done
from selftests (userspace).
While at it, also change trigger_config_run_type, since at module
initialization we already set the defaults at __kmod_config_init and
should not need to do it again in test_kmod_init(), thus we can avoid to
again set test_driver/test_fs.
Link: https://lkml.kernel.org/r/20250418165047.702487-1-herton@redhat.com
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Luis Chambelrain <mcgrof@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last use of relay_late_setup_files() was removed in 2018 by commit
2b47733045aa ("drm/i915/guc: Merge log relay file and channel creation")
Remove it and the helper it used.
relay_late_setup_files() was used for eventually registering 'buffer only'
channels. With it gone, delete the docs that explain how to do that.
Which suggests it should be possible to lose the 'has_base_filename'
flags.
(Are there any other uses??)
Link: https://lkml.kernel.org/r/20250418234932.490863-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
rio_request_dma() and rio_dma_prep_slave_sg() were added in 2012 by commit
e42d98ebe7d7 ("rapidio: add DMA engine support for RIO data transfers")
but never used.
rio_find_mport() last use was removed in 2013 by commit 9edbc30b434f
("rapidio: update enumerator registration mechanism")
rio_unregister_scan() was added in 2013 by commit a11650e11093 ("rapidio:
make enumeration/discovery configurable") but never used.
Remove them.
Link: https://lkml.kernel.org/r/20250419203012.429787-3-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "rapidio deadcoding".
A couple of rapidio deadcoding patches. The first of these is a repost
and was originally posted almost a year ago
https://lore.kernel.org/all/20240528002515.211366-1-linux@treblig.org/ but
got no answer. Other than being rebased and a typo fixed, it's not
changed.
This patch (of 2):
'mport_dma_buf', 'rio_mport_dma_map' and 'MPORT_MAX_DMA_BUFS' were added
in the original commit e8de370188d0 ("rapidio: add mport char device
driver") but never used.
'rio_cm_work' was unused since the original commit b6e8d4aa1110 ("rapidio:
add RapidIO channelized messaging driver") but never used.
Remove them.
Link: https://lkml.kernel.org/r/20250419203012.429787-1-linux@treblig.org
Link: https://lkml.kernel.org/r/20250419203012.429787-2-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sg_next() is a short function called frequently in I/O paths. Define it
in the header file so it can be inlined into its callers.
Link: https://lkml.kernel.org/r/20250416160615.3571958-1-csander@purestorage.com
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Don't negate 'ret' and simplify the return statement.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend the existing hung_task detector test module to support multiple
lock types, including mutex and semaphore, with room for future additions
(e.g., spinlock, etc.). This module creates dummy files under
<debugfs>/hung_task, such as 'mutex' and 'semaphore'. The read process on
any of these files will sleep for enough long time (256 seconds) while
holding the respective lock. As a result, the second process will wait on
the lock for a prolonged duration and be detected by the hung_task
detector.
This change unifies the previous mutex-only sample into a single,
extensible hung_task_tests module, reducing code duplication and improving
maintainability.
Usage is:
> cd /sys/kernel/debug/hung_task
> cat mutex & cat mutex # Test mutex blocking
> cat semaphore & cat semaphore # Test semaphore blocking
Update the Kconfig description to reflect multiple debugfs files support.
Link: https://lkml.kernel.org/r/20250414145945.84916-4-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Signed-off-by: Zi Li <amaindex@outlook.com>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Inspired by mutex blocker tracking[1], this patch makes a trade-off to
balance the overhead and utility of the hung task detector.
Unlike mutexes, semaphores lack explicit ownership tracking, making it
challenging to identify the root cause of hangs. To address this, we
introduce a last_holder field to the semaphore structure, which is updated
when a task successfully calls down() and cleared during up().
The assumption is that if a task is blocked on a semaphore, the holders
must not have released it. While this does not guarantee that the last
holder is one of the current blockers, it likely provides a practical hint
for diagnosing semaphore-related stalls.
With this change, the hung task detector can now show blocker task's info
like below:
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked for more than 120 seconds.
[Tue Apr 8 12:19:07 2025] Tainted: G E 6.14.0-rc6+ #1
[Tue Apr 8 12:19:07 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Tue Apr 8 12:19:07 2025] task:cat state:D stack:0 pid:945 tgid:945 ppid:828 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0xe3/0xf0
[Tue Apr 8 12:19:07 2025] ? __folio_mod_stat+0x2a/0x80
[Tue Apr 8 12:19:07 2025] ? set_ptes.constprop.0+0x27/0x90
[Tue Apr 8 12:19:07 2025] __down_common+0x155/0x280
[Tue Apr 8 12:19:07 2025] down+0x53/0x70
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x23/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f419478f46e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007fff1c4d2668 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f419478f46e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f4194683000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f4194683000 R08: 00007f4194682010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked on a semaphore likely last held by task cat:938
[Tue Apr 8 12:19:07 2025] task:cat state:S stack:0 pid:938 tgid:938 ppid:584 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] ? _raw_spin_unlock_irqrestore+0xe/0x40
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0x77/0xf0
[Tue Apr 8 12:19:07 2025] ? __pfx_process_timeout+0x10/0x10
[Tue Apr 8 12:19:07 2025] msleep_interruptible+0x49/0x60
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x2d/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f7c584a646e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007ffdba8ce158 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f7c584a646e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f7c5839a000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f7c5839a000 R08: 00007f7c58399010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[1] https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com
Link: https://lkml.kernel.org/r/20250414145945.84916-3-ioworker0@gmail.com
Signed-off-by: Mingzhe Yang <mingzhe.yang@ly.com>
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <amaindex@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "hung_task: extend blocking task stacktrace dump to
semaphore", v5.
Inspired by mutex blocker tracking[1], this patch series extend the
feature to not only dump the blocker task holding a mutex but also to
support semaphores. Unlike mutexes, semaphores lack explicit ownership
tracking, making it challenging to identify the root cause of hangs. To
address this, we introduce a last_holder field to the semaphore structure,
which is updated when a task successfully calls down() and cleared during
up().
The assumption is that if a task is blocked on a semaphore, the holders
must not have released it. While this does not guarantee that the last
holder is one of the current blockers, it likely provides a practical hint
for diagnosing semaphore-related stalls.
With this change, the hung task detector can now show blocker task's info
like below:
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked for more than 120 seconds.
[Tue Apr 8 12:19:07 2025] Tainted: G E 6.14.0-rc6+ #1
[Tue Apr 8 12:19:07 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Tue Apr 8 12:19:07 2025] task:cat state:D stack:0 pid:945 tgid:945 ppid:828 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0xe3/0xf0
[Tue Apr 8 12:19:07 2025] ? __folio_mod_stat+0x2a/0x80
[Tue Apr 8 12:19:07 2025] ? set_ptes.constprop.0+0x27/0x90
[Tue Apr 8 12:19:07 2025] __down_common+0x155/0x280
[Tue Apr 8 12:19:07 2025] down+0x53/0x70
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x23/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f419478f46e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007fff1c4d2668 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f419478f46e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f4194683000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f4194683000 R08: 00007f4194682010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked on a semaphore likely last held by task cat:938
[Tue Apr 8 12:19:07 2025] task:cat state:S stack:0 pid:938 tgid:938 ppid:584 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] ? _raw_spin_unlock_irqrestore+0xe/0x40
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0x77/0xf0
[Tue Apr 8 12:19:07 2025] ? __pfx_process_timeout+0x10/0x10
[Tue Apr 8 12:19:07 2025] msleep_interruptible+0x49/0x60
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x2d/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f7c584a646e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007ffdba8ce158 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f7c584a646e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f7c5839a000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f7c5839a000 R08: 00007f7c58399010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
This patch (of 3):
This patch replaces 'struct mutex *blocker_mutex' with 'unsigned long
blocker', as only one blocker is active at a time.
The blocker filed can store both the lock addrees and the lock type, with
LSB used to encode the type as Masami suggested, making it easier to
extend the feature to cover other types of locks.
Also, once the lock type is determined, we can directly extract the
address and cast it to a lock pointer ;)
Link: https://lkml.kernel.org/r/20250414145945.84916-1-ioworker0@gmail.com
Link: https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com [1]
Link: https://lkml.kernel.org/r/20250414145945.84916-2-ioworker0@gmail.com
Signed-off-by: Mingzhe Yang <mingzhe.yang@ly.com>
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <amaindex@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8fa7292fee5c ("treewide: Switch/rename to timer_delete[_sync]()")
switched del_timer_sync to timer_delete_sync, but did not modify the
comment for o2net_idle_timer(). Now fix it.
Link: https://lkml.kernel.org/r/BDDB1E4E2876C36C+20250411102610.165946-1-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
----
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = ffz(~msblk->devblksize);
----
sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0.
As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2
is set to 64.
This subsequently causes the
UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36
shift exponent 64 is too large for 64-bit type 'u64' (aka
'unsigned long long')
This commit adds a check for a 0 return by sb_min_blocksize().
Link: https://lkml.kernel.org/r/20250409024747.876480-1-phillip@squashfs.org.uk
Fixes: 0aa666190509 ("Squashfs: super block operations")
Reported-by: syzbot+65761fc25a137b9c8c6e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67f0dd7a.050a0220.0a13.0230.GAE@google.com/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
coredump_task_exit()
This reduces single-threaded overhead as it avoids one lock+irq trip on
exit.
It also improves scalability of spawning and killing threads within one
process (just shy of 5% when doing it on 24 cores on my test jig).
Both routines are moved below kcov and kmsan exit, which should be
harmless.
Link: https://lkml.kernel.org/r/20250319195436.1864415-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current errseq implementation depends on a very special precondition that
macro MAX_ERRNO must be (2^n - 1).
Eliminate the limitation by
- redefining macro ERRSEQ_SHIFT
- defining a new macro ERRNO_MASK instead of MAX_ERRNO for errno mask.
There is no plan to change the value of MAX_ERRNO, but this makes the
implementation more generic and eliminates the BUILD_BUG_ON().
Link: https://lkml.kernel.org/r/20250407-improve_errseq-v1-1-7b27cbeb8298@quicinc.com
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In some places in the kernel there is a design pattern for sysfs
attributes to use kstrtobool() in store() and str_enabled_disabled() in
show().
This is counterintuitive to interact with because kstrtobool() takes
on/off but str_enabled_disabled() shows enabled/disabled. Some of those
sysfs uses could switch to str_on_off() but for some attributes
enabled/disabled really makes more sense.
Add support for kstrtobool() to accept enabled/disabled.
Link: https://lkml.kernel.org/r/20250321022538.1532445-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While the natural choice of PTR_IF() is kconfig.h, the latter is too broad
to include C code and actually the macro was moved out from there in the
past. But kernel.h is neither a good choice for that. Move it to
util_macros.h. Do the same for u64_to_user_ptr().
While moving, add necessary documentation.
Link: https://lkml.kernel.org/r/20250324105228.775784-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexandru Ardelean <aardelean@baylibre.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kernel.h: Move out a couple of macros and constants".
kernel.h hosts a couple of macros and constants that may be better placed.
Do that. Also add missing documentation. No functional changes
intended.
This patch (of 2):
Headers shouldn't be forced to include <linux/kernel.h> just to
gain these simple constants.
Link: https://lkml.kernel.org/r/20250324105228.775784-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20250324105228.775784-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexandru Ardelean <aardelean@baylibre.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reduces log-msgs during boot from many pages to ~10 occurrences. I
didn't investigate why it wasn't just 1, maybe its a low-level service to
other modules, re-probed by each of them ?
Link: https://lkml.kernel.org/r/20250325235156.663269-4-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a paragraph of advice qualifying the general do-while-0 advice, noting
3 possible misguidings. reduce one ERROR to WARN, for the case I actually
encountered.
And add 'static_assert' to named exceptions, along with some additional
comments about named exceptions vs (detection of) declarative construction
primitives (union, struct, [], etc).
Link: https://lkml.kernel.org/r/20250325235156.663269-3-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "2 checkpatch fixes, one pr_info_once".
2 small tweaks to checkpatch,
1 reducing several pages of powernow "not-relevant-here" log-msgs to a few lines
This patch (of 3):
We currently get:
WARNING: Argument 'name' is not used in function-like macro
on:
#define DRM_CLASSMAP_USE(name) /* nothing here */
Following this advice is wrong here, and shouldn't be fixed by ignoring
args altogether; the macro should properly fail if invoked with 0 or 2+
args.
Link: https://lkml.kernel.org/r/20250325235156.663269-1-jim.cromie@gmail.com
Link: https://lkml.kernel.org/r/20250325235156.663269-2-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc:"Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
proc_mem_open() can return an errno, NULL, or mm_struct*. If it fails to
acquire mm, it returns NULL, but the caller does not check for the case
when the return value is NULL.
The following conditions lead to failure in acquiring mm:
- The task is a kernel thread (PF_KTHREAD)
- The task is exiting (PF_EXITING)
Changes:
- Add documentation comments for the return value of proc_mem_open().
- Add checks in the caller to return -ESRCH when proc_mem_open()
returns NULL.
Link: https://lkml.kernel.org/r/20250404063357.78891-1-superman.xpt@gmail.com
Reported-by: syzbot+f9238a0a31f9b5603fef@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000f52642060d4e3750@google.com
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Adrian Ratiu <adrian.ratiu@collabora.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Felix Moessbauer <felix.moessbauer@siemens.com>
Cc: Jeff layton <jlayton@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace `sr` with `Sr`. The condition `!tmp1 || rb_is_black(tmp1)`
ensures that `tmp1` (which is `sibling->rb_right`) is either NULL or a
black node. Therefore, the right child of the sibling must be black, and
the example should use `Sr` instead of `sr`.
Link: https://lkml.kernel.org/r/20250403112614.570140-1-johnny1001s000602@gmail.com
Signed-off-by: Chisheng Chen <johnny1001s000602@gmail.com>
Cc: Hsin Chang Yu <zxcvb600870024@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove __HAVE_ARCH_KSTACK_END as it has been obsolete since removal of
metag architecture in v4.17.
Link: https://lkml.kernel.org/r/20250403-kstack-end-v1-1-7798e71f34d1@linaro.org
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/20240311164638.2015063-2-pasha.tatashin@soleen.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On Intel TDX guest, unaccepted memory is unusable free memory which is not
managed by buddy, until it's accepted by guest. Before that, it cannot be
accessed by the first kernel as well as the kexec'ed kernel. The kexec'ed
kernel will skip these pages and fill in zero data for the reader of
vmcore.
The dump tool like makedumpfile creates a page descriptor (size 24 bytes)
for each non-free page, including zero data page, but it will not create
descriptor for free pages. If it is not able to distinguish these
unaccepted pages with zero data pages, a certain amount of space will be
wasted in proportion (~1/170). In fact, as a special kind of free page
the unaccepted pages should be excluded, like the real free pages.
Export the page type PAGE_UNACCEPTED_MAPCOUNT_VALUE to vmcoreinfo, so that
dump tool can identify whether a page is unaccepted.
[zhiquan1.li@intel.com: fix docs: "Title underline too short" warning]
Link: https://lore.kernel.org/all/20240809114854.3745464-5-kirill.shutemov@linux.intel.com/
Link: https://lkml.kernel.org/r/20250405060610.860465-1-zhiquan1.li@intel.com
Link: https://lore.kernel.org/all/20240809114854.3745464-5-kirill.shutemov@linux.intel.com/
Link: https://lkml.kernel.org/r/20250403030801.758687-1-zhiquan1.li@intel.com
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When initcall_debug is specified on the command line, the start and return
point for each initcall is printed. However, no information on the
initcall level is reported.
Add to the initcall_debug infrastructure an additional print that informs
when a new initcall level is entered. This is particularly useful when
debugging dependency chains and/or working on boot time reduction.
Link: https://lkml.kernel.org/r/20250316205014.2830071-2-francesco@valla.it
Signed-off-by: Francesco Valla <francesco@valla.it>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is useful to be able to access current->mm at task exit to, say, record
a bunch of VMA information right before the task exits (e.g., for stack
symbolization reasons when dealing with short-lived processes that exit in
the middle of profiling session). Currently, trace_sched_process_exit()
is triggered after exit_mm() which resets current->mm to NULL making this
tracepoint unsuitable for inspecting and recording task's
mm_struct-related data when tracing process lifetimes.
There is a particularly suitable place, though, right after
taskstats_exit() is called, but before we do exit_mm() and other exit_*()
resource teardowns. taskstats performs a similar kind of accounting that
some applications do with BPF, and so co-locating them seems like a good
fit. So that's where trace_sched_process_exit() is moved with this patch.
Also, existing trace_sched_process_exit() tracepoint is notoriously
missing `group_dead` flag that is certainly useful in practice and some of
our production applications have to work around this. So plumb
`group_dead` through while at it, to have a richer and more complete
tracepoint.
Note that we can't use sched_process_template anymore, and so we use
TRACE_EVENT()-based tracepoint definition. But all the field names and
order, as well as assign and output logic remain intact. We just add one
extra field at the end in backwards-compatible way.
[andrii@kernel.org: document sched_process_exit and sched_process_template relation]
Link: https://lkml.kernel.org/r/20250403174120.4087794-1-andrii@kernel.org
Link: https://lkml.kernel.org/r/20250402180925.90914-1-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
|
|
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
|
|
Pull mount fixes from Al Viro:
"A couple of races around legalize_mnt vs umount (both fairly old and
hard to hit) plus two bugs in move_mount(2) - both around 'move
detached subtree in place' logics"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix IS_MNT_PROPAGATING uses
do_move_mount(): don't leak MNTNS_PROPAGATING on failures
do_umount(): add missing barrier before refcount checks in sync case
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
|
|
KVM x86 fixes for 6.15-rcN
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
- When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
|
|
into HEAD
KVM/riscv fixes for 6.15, take #1
- Add missing reset of smstateen CSRs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc6
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
|