summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-27net: rmnet: use upper/lower device infrastructureTaehee Yoo
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet1 link dummy0 type rmnet mux_id 1 for i in {2..100} do let A=$i-1 ip link add rmnet$i link rmnet$A type rmnet mux_id $i done ip link del dummy0 The purpose of the test commands is to make stack overflow. Splat looks like: [ 52.411438][ T1395] BUG: KASAN: slab-out-of-bounds in find_busiest_group+0x27e/0x2c00 [ 52.413218][ T1395] Write of size 64 at addr ffff8880c774bde0 by task ip/1395 [ 52.414841][ T1395] [ 52.430720][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.496511][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.513597][ T1395] Call Trace: [ 52.546516][ T1395] [ 52.558773][ T1395] Allocated by task 3171537984: [ 52.588290][ T1395] BUG: unable to handle page fault for address: ffffffffb999e260 [ 52.589311][ T1395] #PF: supervisor read access in kernel mode [ 52.590529][ T1395] #PF: error_code(0x0000) - not-present page [ 52.591374][ T1395] PGD d6818067 P4D d6818067 PUD d6819063 PMD 0 [ 52.592288][ T1395] Thread overran stack, or stack corrupted [ 52.604980][ T1395] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 52.605856][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.611764][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.621520][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.622296][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 52.627887][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 52.628735][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 52.631773][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 52.649584][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 52.674857][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 52.678257][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 52.694541][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 52.764039][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 52.815008][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 52.862312][ T1395] Call Trace: [ 52.887133][ T1395] Modules linked in: dummy rmnet veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_dex [ 52.936749][ T1395] CR2: ffffffffb999e260 [ 52.965695][ T1395] ---[ end trace 7e32ca99482dbb31 ]--- [ 52.966556][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.971083][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 53.003650][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 53.043183][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 53.076480][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 53.093858][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 53.112795][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 53.139837][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 53.141500][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 53.143343][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.152007][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 53.156459][ T1395] Kernel panic - not syncing: Fatal exception [ 54.213570][ T1395] Shutting down cpus with NMI [ 54.354112][ T1395] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0x) [ 54.355687][ T1395] Rebooting in 5 seconds.. Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: do not allow to change mux id if mux id is duplicatedTaehee Yoo
Basically, duplicate mux id isn't be allowed. So, the creation of rmnet will be failed if there is duplicate mux id is existing. But, changelink routine doesn't check duplicate mux id. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add rmnet1 link dummy0 type rmnet mux_id 2 ip link set rmnet1 type rmnet mux_id 1 Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()Taehee Yoo
The notifier_call() of the slave interface removes rmnet interface with unregister_netdevice_queue(). But, before calling unregister_netdevice_queue(), it acquires rcu readlock. In the RCU critical section, sleeping isn't be allowed. But, unregister_netdevice_queue() internally calls synchronize_net(), which would sleep. So, suspicious RCU usage warning occurs. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link del dummy0 Splat looks like: [ 79.639245][ T1195] ============================= [ 79.640134][ T1195] WARNING: suspicious RCU usage [ 79.640852][ T1195] 5.6.0-rc1+ #447 Not tainted [ 79.641657][ T1195] ----------------------------- [ 79.642472][ T1195] ./include/linux/rcupdate.h:273 Illegal context switch in RCU read-side critical section! [ 79.644043][ T1195] [ 79.644043][ T1195] other info that might help us debug this: [ 79.644043][ T1195] [ 79.645682][ T1195] [ 79.645682][ T1195] rcu_scheduler_active = 2, debug_locks = 1 [ 79.646980][ T1195] 2 locks held by ip/1195: [ 79.647629][ T1195] #0: ffffffffa3cf64f0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890 [ 79.649312][ T1195] #1: ffffffffa39256c0 (rcu_read_lock){....}, at: rmnet_config_notify_cb+0xf0/0x590 [rmnet] [ 79.651717][ T1195] [ 79.651717][ T1195] stack backtrace: [ 79.652650][ T1195] CPU: 3 PID: 1195 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 79.653702][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 79.655037][ T1195] Call Trace: [ 79.655560][ T1195] dump_stack+0x96/0xdb [ 79.656252][ T1195] ___might_sleep+0x345/0x440 [ 79.656994][ T1195] synchronize_net+0x18/0x30 [ 79.661132][ T1195] netdev_rx_handler_unregister+0x40/0xb0 [ 79.666266][ T1195] rmnet_unregister_real_device+0x42/0xb0 [rmnet] [ 79.667211][ T1195] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 79.668121][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.669166][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.670286][ T1195] ? __module_text_address+0x13/0x140 [ 79.671139][ T1195] notifier_call_chain+0x90/0x160 [ 79.671973][ T1195] rollback_registered_many+0x660/0xcf0 [ 79.672893][ T1195] ? netif_set_real_num_tx_queues+0x780/0x780 [ 79.675091][ T1195] ? __lock_acquire+0xdfe/0x3de0 [ 79.675825][ T1195] ? memset+0x1f/0x40 [ 79.676367][ T1195] ? __nla_validate_parse+0x98/0x1ab0 [ 79.677290][ T1195] unregister_netdevice_many.part.133+0x13/0x1b0 [ 79.678163][ T1195] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix suspicious RCU usageTaehee Yoo
rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_changelink()Taehee Yoo
In the rmnet_changelink(), it uses IFLA_LINK without checking NULL pointer. tb[IFLA_LINK] could be NULL pointer. So, NULL-ptr-deref could occur. rmnet already has a lower interface (real_dev). So, after this patch, rmnet_changelink() does not use IFLA_LINK anymore. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set rmnet0 type rmnet mux_id 2 Splat looks like: [ 90.578726][ T1131] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 90.581121][ T1131] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.582380][ T1131] CPU: 2 PID: 1131 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 90.584285][ T1131] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 90.587506][ T1131] RIP: 0010:rmnet_changelink+0x5a/0x8a0 [rmnet] [ 90.588546][ T1131] Code: 83 ec 20 48 c1 ea 03 80 3c 02 00 0f 85 6f 07 00 00 48 8b 5e 28 48 b8 00 00 00 00 00 0 [ 90.591447][ T1131] RSP: 0018:ffff8880ce78f1b8 EFLAGS: 00010247 [ 90.592329][ T1131] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff8880ce78f8b0 [ 90.593253][ T1131] RDX: 0000000000000000 RSI: ffff8880ce78f4a0 RDI: 0000000000000004 [ 90.594058][ T1131] RBP: ffff8880cf543e00 R08: 0000000000000002 R09: 0000000000000002 [ 90.594859][ T1131] R10: ffffffffc0586a40 R11: 0000000000000000 R12: ffff8880ca47c000 [ 90.595690][ T1131] R13: ffff8880ca47c000 R14: ffff8880cf545000 R15: 0000000000000000 [ 90.596553][ T1131] FS: 00007f21f6c7e0c0(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 90.597504][ T1131] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.599418][ T1131] CR2: 0000556e413db458 CR3: 00000000c917a002 CR4: 00000000000606e0 [ 90.600289][ T1131] Call Trace: [ 90.600631][ T1131] __rtnl_newlink+0x922/0x1270 [ 90.601194][ T1131] ? lock_downgrade+0x6e0/0x6e0 [ 90.601724][ T1131] ? rtnl_link_unregister+0x220/0x220 [ 90.602309][ T1131] ? lock_acquire+0x164/0x3b0 [ 90.602784][ T1131] ? is_bpf_image_address+0xff/0x1d0 [ 90.603331][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.603810][ T1131] ? kernel_text_address+0x111/0x140 [ 90.604419][ T1131] ? __kernel_text_address+0xe/0x30 [ 90.604981][ T1131] ? unwind_get_return_address+0x5f/0xa0 [ 90.605616][ T1131] ? create_prof_cpu_mask+0x20/0x20 [ 90.606304][ T1131] ? arch_stack_walk+0x83/0xb0 [ 90.606985][ T1131] ? stack_trace_save+0x82/0xb0 [ 90.607656][ T1131] ? stack_trace_consume_entry+0x160/0x160 [ 90.608503][ T1131] ? deactivate_slab.isra.78+0x2c5/0x800 [ 90.609336][ T1131] ? kasan_unpoison_shadow+0x30/0x40 [ 90.610096][ T1131] ? kmem_cache_alloc_trace+0x135/0x350 [ 90.610889][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.611512][ T1131] rtnl_newlink+0x65/0x90 [ ... ] Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_newlink()Taehee Yoo
rmnet registers IFLA_LINK interface as a lower interface. But, IFLA_LINK could be NULL. In the current code, rmnet doesn't check IFLA_LINK. So, panic would occur. Test commands: modprobe rmnet ip link add rmnet0 type rmnet mux_id 1 Splat looks like: [ 36.826109][ T1115] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 36.838817][ T1115] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 36.839908][ T1115] CPU: 1 PID: 1115 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 36.840569][ T1115] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 36.841408][ T1115] RIP: 0010:rmnet_newlink+0x54/0x510 [rmnet] [ 36.841986][ T1115] Code: 83 ec 18 48 c1 e9 03 80 3c 01 00 0f 85 d4 03 00 00 48 8b 6a 28 48 b8 00 00 00 00 00 c [ 36.843923][ T1115] RSP: 0018:ffff8880b7e0f1c0 EFLAGS: 00010247 [ 36.844756][ T1115] RAX: dffffc0000000000 RBX: ffff8880d14cca00 RCX: 1ffff11016fc1e99 [ 36.845859][ T1115] RDX: 0000000000000000 RSI: ffff8880c3d04000 RDI: 0000000000000004 [ 36.846961][ T1115] RBP: 0000000000000000 R08: ffff8880b7e0f8b0 R09: ffff8880b6ac2d90 [ 36.848020][ T1115] R10: ffffffffc0589a40 R11: ffffed1016d585b7 R12: ffffffff88ceaf80 [ 36.848788][ T1115] R13: ffff8880c3d04000 R14: ffff8880b7e0f8b0 R15: ffff8880c3d04000 [ 36.849546][ T1115] FS: 00007f50ab3360c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 36.851784][ T1115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.852422][ T1115] CR2: 000055871afe5ab0 CR3: 00000000ae246001 CR4: 00000000000606e0 [ 36.853181][ T1115] Call Trace: [ 36.853514][ T1115] __rtnl_newlink+0xbdb/0x1270 [ 36.853967][ T1115] ? lock_downgrade+0x6e0/0x6e0 [ 36.854420][ T1115] ? rtnl_link_unregister+0x220/0x220 [ 36.854936][ T1115] ? lock_acquire+0x164/0x3b0 [ 36.855376][ T1115] ? is_bpf_image_address+0xff/0x1d0 [ 36.855884][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.856304][ T1115] ? kernel_text_address+0x111/0x140 [ 36.856857][ T1115] ? __kernel_text_address+0xe/0x30 [ 36.857440][ T1115] ? unwind_get_return_address+0x5f/0xa0 [ 36.858063][ T1115] ? create_prof_cpu_mask+0x20/0x20 [ 36.858644][ T1115] ? arch_stack_walk+0x83/0xb0 [ 36.859171][ T1115] ? stack_trace_save+0x82/0xb0 [ 36.859710][ T1115] ? stack_trace_consume_entry+0x160/0x160 [ 36.860357][ T1115] ? deactivate_slab.isra.78+0x2c5/0x800 [ 36.860928][ T1115] ? kasan_unpoison_shadow+0x30/0x40 [ 36.861520][ T1115] ? kmem_cache_alloc_trace+0x135/0x350 [ 36.862125][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.864073][ T1115] rtnl_newlink+0x65/0x90 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27ARM: dts: bcm2711: Add pcie0 aliasNicolas Saenz Julienne
Some bcm2711 revisions have different DMA constraints on the their PCIE bus. The lower common denominator, being able to access the lower 3GB of memory, is the default setting for now. Newer SoC revisions are able to access the whole memory space. Raspberry Pi 4's firmware is aware of this limitation and will correct the PCIE's dma-ranges property if a pcie0 alias is available. So add it. Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-02-27ARM: dts: bcm283x: Add missing properties to the PWR LEDStefan Wahren
This adds the missing properties to the PWR LED for the RPi 3 & 4 boards, which are already set for the other boards. Without them we will lose the LED state after suspend. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-02-27Merge tag 'kbuild-fixes-v5.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix missed rebuild of DT schema check - add some phony targets to PHONY - fix comments and documents * tag 'kbuild-fixes-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: get rid of trailing slash from subdir- example kbuild: add dt_binding_check to PHONY in a correct place kbuild: add dtbs_check to PHONY kbuild: remove unneeded semicolon at the end of cmd_dtb_check kbuild: fix DT binding schema rule to detect command line changes kbuild: remove wrong documentation about mandatory-y kbuild: add comment for V=2 mode
2020-02-27net: phy: marvell: don't interpret PHY status unless resolvedRussell King
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27mlx5: register lag notifier for init network namespace onlyJiri Pirko
The current code causes problems when the unregistering netdevice could be different then the registering one. Since the check in mlx5_lag_netdev_event() does not allow any other network namespace anyway, fix this by registerting the lag notifier per init network namespace only. Fixes: d48834f9d4b4 ("mlx5: Use dev_net netdevice notifier registrations") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Aya Levin <ayal@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27drm/i915: Set up PIPE_MISC truncate bit on tgl+Ville Syrjälä
Looks like the pipe rounding mode bit has moved from PIPE_CHICKEN to PIPE_MISC on tgl. Frob the new location. Bspec does still document the old bits as well, so I left the code for them as is until we get clarification from the hw folks on whether the old bits still do something useful. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226163054.9509-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-02-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - syzkaller-reported error handling fixes in various drivers, from various people - increase of HID report buffer size to 8K, which is apparently needed by certain modern devices - a few new device-ID-specific fixes / quirks - battery charging status reporting fix in logitech-hidpp, from Filipe Laíns * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hid-bigbenff: fix race condition for scheduled work during removal HID: hid-bigbenff: call hid_hw_stop() in case of error HID: hid-bigbenff: fix general protection fault caused by double kfree HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override HID: alps: Fix an error handling path in 'alps_input_configured()' HID: hiddev: Fix race in in hiddev_disconnect() HID: core: increase HID report buffer size to 8KiB HID: core: fix off-by-one memset in hid_report_raw_event() HID: apple: Add support for recent firmware on Magic Keyboards HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-27unix: define and set show_fdinfo only if procfs is enabledTobias Klauser
Follow the pattern used with other *_show_fdinfo functions and only define unix_show_fdinfo and set it in proto_ops if CONFIG_PROCFS is set. Fixes: 3c32da19a858 ("unix: Show number of pending scm files of receive queue in fdinfo") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge branch 'hinic-BugFixes'David S. Miller
Luo bin says: ==================== hinic: BugFixes the bug fixed in patch #2 has been present since the first commit. the bugs fixed in patch #1 and patch #3 have been present since the following commits: patch #1: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") patch #3: 421e9526288b ("hinic: add rss support") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27hinic: fix a bug of rss configurationLuo bin
should use real receive queue number to configure hw rss indirect table rather than maximal queue number Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27hinic: fix a bug of setting hw_ioctxtLuo bin
a reserved field is used to signify prime physical function index in the latest firmware version, so we must assign a value to it correctly Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27hinic: fix a irq affinity bugLuo bin
can not use a local variable as an input parameter of irq_set_affinity_hint Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge tag 'docs-5.6-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A pair of docs-build fixes" * tag 'docs-5.6-fixes' of git://git.lwn.net/linux: docs: Fix empty parallelism argument docs: remove MPX from the x86 toc
2020-02-27Merge tag 'audit-pr-20200226' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fixes from Paul Moore: "Two fixes for problems found by syzbot: - Moving audit filter structure fields into a union caused some problems in the code which populates that filter structure. We keep the union (that idea is a good one), but we are fixing the code so that it doesn't needlessly set fields in the union and mess up the error handling. - The audit_receive_msg() function wasn't validating user input as well as it should in all cases, we add the necessary checks" * tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: always check the netlink payload length in audit_receive_msg() audit: fix error handling in audit_data_to_entry()
2020-02-27Merge tag 'tee-amdtee-fix-for-5.6' of ↵Olof Johansson
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fix AMDTEE memory leak in amdtee_open_session() * tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits) tee: amdtee: fix memory leak in amdtee_open_session() Linux 5.6-rc2 ext4: improve explanation of a mount failure caused by a misconfigured kernel Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member IB/mlx5: Use div64_u64 for num_var_hw_entries calculation nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails cifs: make sure we do not overflow the max EA buffer size cifs: enable change notification for SMB2.1 dialect netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() ... Link: https://lore.kernel.org/r/20200227165205.GA7926@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-27x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changesSean Christopherson
Explicitly set X86_FEATURE_OSPKE via set_cpu_cap() instead of calling get_cpu_cap() to pull the feature bit from CPUID after enabling CR4.PKE. Invoking get_cpu_cap() effectively wipes out any {set,clear}_cpu_cap() changes that were made between this_cpu->c_init() and setup_pku(), as all non-synthetic feature words are reinitialized from the CPU's CPUID values. Blasting away capability updates manifests most visibility when running on a VMX capable CPU, but with VMX disabled by BIOS. To indicate that VMX is disabled, init_ia32_feat_ctl() clears X86_FEATURE_VMX, using clear_cpu_cap() instead of setup_clear_cpu_cap() so that KVM can report which CPU is misconfigured (KVM needs to probe every CPU anyways). Restoring X86_FEATURE_VMX from CPUID causes KVM to think VMX is enabled, ultimately leading to an unexpected #GP when KVM attempts to do VMXON. Arguably, init_ia32_feat_ctl() should use setup_clear_cpu_cap() and let KVM figure out a different way to report the misconfigured CPU, but VMX is not the only feature bit that is affected, i.e. there is precedent that tweaking feature bits via {set,clear}_cpu_cap() after ->c_init() is expected to work. Most notably, x86_init_rdrand()'s clearing of X86_FEATURE_RDRAND when RDRAND malfunctions is also overwritten. Fixes: 0697694564c8 ("x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU") Reported-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
2020-02-27Merge tag 'renesas-fixes-for-v5.6-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas Fixes for v5.6 - Restore R-Car M3-W support, - Drop deprecated compatible value to ease DT binding conversion to json-schema. * tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960 Link: https://lore.kernel.org/r/20200226105236.18368-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-27dm thin metadata: fix lockdep complaintTheodore Ts'o
[ 3934.173244] ====================================================== [ 3934.179572] WARNING: possible circular locking dependency detected [ 3934.185884] 5.4.21-xfstests #1 Not tainted [ 3934.190151] ------------------------------------------------------ [ 3934.196673] dmsetup/8897 is trying to acquire lock: [ 3934.201688] ffffffffbce82b18 (shrinker_rwsem){++++}, at: unregister_shrinker+0x22/0x80 [ 3934.210268] but task is already holding lock: [ 3934.216489] ffff92a10cc5e1d0 (&pmd->root_lock){++++}, at: dm_pool_metadata_close+0xba/0x120 [ 3934.225083] which lock already depends on the new lock. [ 3934.564165] Chain exists of: shrinker_rwsem --> &journal->j_checkpoint_mutex --> &pmd->root_lock For a more detailed lockdep report, please see: https://lore.kernel.org/r/20200220234519.GA620489@mit.edu We shouldn't need to hold the lock while are just tearing down and freeing the whole metadata pool structure. Fixes: 44d8ebf436399a4 ("dm thin metadata: use pool locking at end of dm_pool_metadata_close") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-27dm cache: fix a crash due to incorrect work item cancellingMikulas Patocka
The crash can be reproduced by running the lvm2 testsuite test lvconvert-thin-external-cache.sh for several minutes, e.g.: while :; do make check T=shell/lvconvert-thin-external-cache.sh; done The crash happens in this call chain: do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset -> memset -> __memset -- which accesses an invalid pointer in the vmalloc area. The work entry on the workqueue is executed even after the bitmap was freed. The problem is that cancel_delayed_work doesn't wait for the running work item to finish, so the work item can continue running and re-submitting itself even after cache_postsuspend. In order to make sure that the work item won't be running, we must use cancel_delayed_work_sync. Also, change flush_workqueue to drain_workqueue, so that if some work item submits itself or another work item, we are properly waiting for both of them. Fixes: c6b4fcbad044 ("dm: add cache target") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-27drm/i915: remove ICP_PP_CONTROLLucas De Marchi
This register was placed in the middle of the PP_STATUS definition instead of together with the PP_CONTROL where it should. Since it's not used and there are no current plans to use it, just remove the definition. v2: remove the define rather than moving it. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190308232321.30168-1-lucas.demarchi@intel.com
2020-02-28nvme-pci: Hold cq_poll_lock while completing CQEsBijan Mottahedeh
Completions need to consumed in the same order the controller submitted them, otherwise future completion entries may overwrite ones we haven't handled yet. Hold the nvme queue's poll lock while completing new CQEs to prevent another thread from freeing command tags for reuse out-of-order. Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues") Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-02-27EDAC/synopsys: Do not print an error with back-to-back snprintf() callsSherry Sun
handle_error() currently calls snprintf() a couple of times in succession to output the message for a CE/UE, therefore overwriting each part of the message which was formatted with the previous snprintf() call. As a result, only the part of the message from the last snprintf() call will be printed. The simplest and most effective way to fix this problem is to combine the whole string into one which to supply to a single snprintf() call. [ bp: Massage. ] Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Cc: Manish Narani <manish.narani@xilinx.com> Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
2020-02-27drm/panfrost: default_supplies[] can be statickbuild test robot
Fixes: 3e1399bccf51 ("drm/panfrost: Add support for multiple regulators") Signed-off-by: kbuild test robot <lkp@intel.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200227014100.GA61938@e50d7db646c3
2020-02-27tee: amdtee: fix memory leak in amdtee_open_session()Dan Carpenter
On these error paths the "sess" variable isn't freed. It's a refcounted pointer so we need to call kref_put(). I re-arranged the code a bit so the error case is always handled before the success case and the error paths are indented two tabs. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-27perf annotate: Fix segfault with source toggleRavi Bangoria
While rendering annotate browser from perf report tui, we keep track of total number of lines(asm + source) in annotation->nr_entries and total number of asm lines in annotation->nr_asm_entries. But we don't reset them before starting. Thus if user annotates same function multiple times, we restart incrementing these fields with old values. This causes a segfault when user tries to toggle source code after annotating same function multiple times. Fix it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-5-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Align struct annotate_argsRavi Bangoria
Align fields of struct annotate_args. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Simplify disasm_line allocation and freeing codeRavi Bangoria
We are allocating disasm_line object in annotation_line__new() instead of disasm_line__new(). Similarly annotation_line__delete() is actually freeing disasm_line object as well. This complexity is because of privsize. But we don't need privsize anymore so get rid of privsize and simplify disasm_line allocation and freeing code. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27PCI: brcmstb: Fix build on 32bit ARM platforms with older compilersMarek Szyprowski
Some older compilers have no implementation for the helper for 64-bit unsigned division/modulo, so linking pcie-brcmstb driver causes the "undefined reference to `__aeabi_uldivmod'" error. *rc_bar2_size is always a power of two, because it is calculated as: "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo operation in the subsequent check can be replaced by a simple logical AND with a proper mask. Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-02-27perf annotate: Remove privsize from symbol__annotate() argsRavi Bangoria
privsize is passed as 0 from all the symbol__annotate() callers. Remove it from argument list. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf probe: Check return value of strlist__add() for -ENOMEMHe Zhe
strlist__add() may fail with -ENOMEM. Check it and give debugging hint in advance. Signed-off-by: He Zhe <zhe.he@windriver.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/1582727404-180095-1-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27dma-buf: make move_notify mandatory if importer_ops are providedChristian König
This makes the move_notify callback mandatory when the importer_ops are provided. Since amdgpu is now migrated it doesn't make much sense anymore to allow this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353995/?series=73646&rev=1
2020-02-27dma-buf: drop dynamic_mapping flagChristian König
Instead use the pin() callback to detect dynamic DMA-buf handling. Since amdgpu is now migrated it doesn't make much sense to keep the extra flag. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353997/?series=73646&rev=1
2020-02-27drm/amdgpu: implement amdgpu_gem_prime_move_notify v2Christian König
Implement the importer side of unpinned DMA-buf handling. v2: update page tables immediately Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353998/?series=73646&rev=1
2020-02-27drm/amdgpu: add amdgpu_dma_buf_pin/unpin v2Christian König
This implements the exporter side of unpinned DMA-buf handling. v2: fix minor coding style issues Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353999/?series=73646&rev=1
2020-02-27drm/amdgpu: use allowed_domains for exported DMA-bufsChristian König
Avoid that we ping/pong the buffers when we stop to pin DMA-buf exports by using the allowed domains for exported buffers. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353996/?series=73646&rev=1
2020-02-27drm/ttm: remove the backing store if no placement is givenChristian König
Pipeline removal of the BOs backing store when no placement is given during validation. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353994/?series=73646&rev=1
2020-02-27dma-buf: add dynamic DMA-buf handling v15Christian König
On the exporter side we add optional explicit pinning callbacks. Which are called when the importer doesn't implement dynamic handling, move notification or need the DMA-buf locked in place for its use case. On the importer side we add an optional move_notify callback. This callback is used by the exporter to inform the importers that their mappings should be destroyed as soon as possible. This allows the exporter to provide the mappings without the need to pin the backing store. v2: don't try to invalidate mappings when the callback is NULL, lock the reservation obj while using the attachments, add helper to set the callback v3: move flag for invalidation support into the DMA-buf, use new attach_info structure to set the callback v4: use importer_priv field instead of mangling exporter priv. v5: drop invalidation_supported flag v6: squash together with pin/unpin changes v7: pin/unpin takes an attachment now v8: nuke dma_buf_attachment_(map|unmap)_locked, everything is now handled backward compatible v9: always cache when export/importer don't agree on dynamic handling v10: minimal style cleanup v11: drop automatically re-entry avoidance v12: rename callback to move_notify v13: add might_lock in appropriate places v14: rebase on separated locking change v15: add EXPERIMENTAL flag, some more code comments Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353993/?series=73646&rev=1
2020-02-27io_uring: define and set show_fdinfo only if procfs is enabledTobias Klauser
Follow the pattern used with other *_show_fdinfo functions and only define and use io_uring_show_fdinfo and its helper functions if CONFIG_PROC_FS is set. Fixes: 87ce955b24c9 ("io_uring: add ->show_fdinfo() for the io_uring file descriptor") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-27perf config: Document missing config optionsRavi Bangoria
While documenting annotate.show_nr_samples config option, I found many other config options missing in perf-config documentation. Add them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-9-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Fix perf config option descriptionRavi Bangoria
perf config annotate options says it works only with TUI, which is wrong. Most of the TUI options are applicable to stdio2 as well. So remove that generic line and add individual line with each option stating which browsers supports that option. Also, annotate.show_nr_samples config is missing in Documentation. Describe it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-8-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Prefer cmdline option over default configRavi Bangoria
For all the perf-config options that can also be set from command line option, the preference is given to command line version in case of any conflict. But that's opposite in case of perf annotate. i.e. the more preference is given to default option rather than command line option. Fix it. Before: $ ./perf config annotate.show_nr_samples=false $ ./perf annotate shash --show-nr-samples Percent│ │24: mov -0xc(%rbp),%eax 49.19 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: Samples│ │24: mov -0xc(%rbp),%eax 1 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-7-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Make perf config effectiveRavi Bangoria
perf default config set by user in [annotate] section is totally ignored by annotate code. Fix it. Before: $ ./perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true $ ./perf annotate shash │ unsigned h = 0; │ movl $0x0,-0xc(%rbp) │ while (*s) │ ↓ jmp 44 │ h = 65599 * h + *s++; 11.33 │24: mov -0xc(%rbp),%eax 43.50 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: │ movl $0x0,-0xc(%rbp) │ ↓ jmp 44 1 │1 24: mov -0xc(%rbp),%eax 4 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Note that we have removed show_nr_samples and show_total_period from annotation_options because they are not used. Instead of them we use symbol_conf.show_nr_samples and symbol_conf.show_total_period. Committer testing: Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio: # perf config # # perf config annotate.hide_src_code=true # perf config annotate.hide_src_code=true # # perf config annotate.show_nr_jumps=true # perf config annotate.show_nr_samples=true # perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true # # Before: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Percent 00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@Base>: endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 100.00 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # After: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1 1b: xor %eax,%eax pop %rbp ← retq nop 1 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # # perf config annotate.show_nr_jumps annotate.show_nr_jumps=true # perf config annotate.show_nr_jumps=false # perf config annotate.show_nr_jumps annotate.show_nr_jumps=false # # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-6-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf config: Introduce perf_config_u8()Ravi Bangoria
Introduce perf_config_u8() utility function to convert char * input into u8 destination. We will utilize it in followup patch. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-5-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Fix --show-nr-samples for tui/stdio2Ravi Bangoria
perf annotate --show-nr-samples does not really show number of samples. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_nr_samples and another is annotation_options.show_nr_samples. We save command line option in symbol_conf.show_nr_samples but uses annotation_option.show_nr_samples while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_nr_samples to annotation__default_options.show_nr_samples but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_nr_samples is used by perf report/top as well. So let's kill annotation_options.show_nr_samples. On a side note, I've kept annotation_options.show_nr_samples definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_nr_samples. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 19:59:24 +0000