| Age | Commit message (Collapse) | Author |
|---|
|
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Introduce Intel IDPF driver
Pavan Kumar Linga says:
This patch series introduces the Intel Infrastructure Data Path Function
(IDPF) driver. It is used for both physical and virtual functions. Except
for some of the device operations the rest of the functionality is the
same for both PF and VF. IDPF uses virtchnl version2 opcodes and
structures defined in the virtchnl2 header file which helps the driver
to learn the capabilities and register offsets from the device
Control Plane (CP) instead of assuming the default values.
The format of the series follows the driver init flow to interface open.
To start with, probe gets called and kicks off the driver initialization
by spawning the 'vc_event_task' work queue which in turn calls the
'hard reset' function. As part of that, the mailbox is initialized which
is used to send/receive the virtchnl messages to/from the CP. Once that is
done, 'core init' kicks in which requests all the required global resources
from the CP and spawns the 'init_task' work queue to create the vports.
Based on the capability information received, the driver creates the said
number of vports (one or many) where each vport is associated to a netdev.
Also, each vport has its own resources such as queues, vectors etc.
From there, rest of the netdev_ops and data path are added.
IDPF implements both single queue which is traditional queueing model
as well as split queue model. In split queue model, it uses separate queue
for both completion descriptors and buffers which helps to implement
out-of-order completions. It also helps to implement asymmetric queues,
for example multiple RX completion queues can be processed by a single
RX buffer queue and multiple TX buffer queues can be processed by a
single TX completion queue. In single queue model, same queue is used
for both descriptor completions as well as buffer completions. It also
supports features such as generic checksum offload, generic receive
offload (hardware GRO) etc.
---
v7:
Patch 2:
* removed pci_[disable|enable]_pcie_error_reporting as they are dropped
from the core
Patch 4, 9:
* used 'kasprintf' instead of 'snprintf' to avoid providing explicit
character string size which also fixes "-Wformat-truncation" warnings
Patch 14:
* used 'ethtool_sprintf' instead of 'snprintf' to avoid providing explicit
character string size which also fixes "-Wformat-truncation" warning
* add string format argument to the 'ethtool_sprintf' to avoid warning on
"-Wformat-security"
v6: https://lore.kernel.org/netdev/20230825235954.894050-1-pavan.kumar.linga@intel.com/
Note: 'Acked-by' was only added to patches 1, 2, 12 and not to the other
patches because of the changes in v6
Patch 3, 4, 5, 6, 7, 8, 9, 11, 13, 14, 15:
* renamed 'reset_lock' to 'vport_ctrl_lock' to reflect the lock usage
* to avoid defensive programming, used 'vport_ctrl_lock' for the user
callbacks that access the 'vport' to prevent the hardware reset thread
from releasing the 'vport', when the user callback is in progress
* added some variables to netdev private structure to avoid vport access
if possible from ethtool and ndo callbacks
* moved 'mac_filter_list_lock' and MAC related flags to vport_config
structure and refactored mac filter flow to handle asynchronous
ndo mac filter callbacks
* stop the queues before starting the reset flow to avoid TX hangs
* removed 'sw_mutex' and 'stop_mutex' as they are not needed anymore
* added missing clear bit in 'init_task' error path
* renamed labels appropriately
Patch 8:
* replaced page_pool_put_page with page_pool_put_full_page
* for the page pool max_len, used PAGE_SIZE
Patch 10, 11, 13:
* made use of the 'netif_txq_maybe_stop', '__netif_txq_completed_wake'
helper macros
Patch 13:
* removed IDPF_HR_RESET_IN_PROG flag check in idpf_tx_singleq_start
as it is defensive
Patch 14:
* removed max descriptor check as the core does that
* removed unnecessary error messages
* removed the stats that are common between the ones reported by ethtool
and ip link
* replaced snprintf with ethtool_sprintf
* added a comment to explain the reason for the max queue check
* as the netdev queues are set on alloc, there is no need to set
them again on reset unless there is a queue change, so move the
'idpf_set_real_num_queues' to 'idpf_initiate_soft_reset'
Patch 15:
* reworded the 'configure SRIOV' in the commit message
v5: https://lore.kernel.org/netdev/20230816004305.216136-1-anthony.l.nguyen@intel.com/
Most Patches:
* wrapped line limit to 80 chars to those which don't effect readability
Patch 12:
* in skb_add_rx_frag, offset 'headlen' w.r.t page_offset when adding a
frag to avoid adding the header again
Patch 14:
* added NULL check for 'rxq' when dereferencing it in page_pool_get_stats
v4: https://lore.kernel.org/netdev/20230808003416.3805142-1-anthony.l.nguyen@intel.com/
Patch 1:
* s/virtcnl/virtchnl
* removed the kernel doc for the error code definitions that don't exist
* reworded the summary part in the virtchnl2 header
Patch 3:
* don't set local variable to NULL on error
* renamed sq_send_command_out label with err_unlock
* don't use __GFP_ZERO in dma_alloc_coherent
Patch 4:
* introduced mailbox workqueue to process mailbox interrupts
Patch 3, 4, 5, 6, 7, 8, 9, 11, 15:
* removed unnecessary variable 0-init
Patch 3, 5, 7, 8, 9, 15:
* removed defensive programming checks wherever applicable
* removed IDPF_CAP_FIELD_LAST as it can be treated as defensive
programming
Patch 3, 4, 5, 6, 7:
* replaced IDPF_DFLT_MBX_BUF_SIZE with IDPF_CTLQ_MAX_BUF_LEN
Patch 2 to 15:
* add kernel-doc for idpf.h and idpf_txrx.h enums and structures
Patch 4, 5, 15:
* adjusted the destroy sequence of the workqueues as per the alloc
sequence
Patch 4, 5, 9, 15:
* scrub unnecessary flags in 'idpf_flags'
- IDPF_REMOVE_IN_PROG flag can take care of the cases where
IDPF_REL_RES_IN_PROG is used, removed the later one
- IDPF_REQ_[TX|RX]_SPLITQ are replaced with struct variables
- IDPF_CANCEL_[SERVICE|STATS]_TASK are redundant as the work queue
doesn't get rescheduled again after 'cancel_delayed_work_sync'
- IDPF_HR_CORE_RESET is removed as there is no set_bit for this flag
- IDPF_MB_INTR_TRIGGER is removed as it is not needed anymore with the
mailbox workqueue implementation
Patch 7 to 15:
* replaced the custom buffer recycling code with page pool API
* switched the header split buffer allocations from using a bunch of
pages to using one large chunk of DMA memory
* reordered some of the flows in vport_open to support page pool
Patch 8, 12:
* don't suppress the alloc errors by using __GFP_NOWARN
Patch 9:
* removed dyn_ctl_clrpba_m as it is not being used
Patch 14:
* introduced enum idpf_vport_reset_cause instead of using vport flags
* introduced page pool stats
v3: https://lore.kernel.org/netdev/20230616231341.2885622-1-anthony.l.nguyen@intel.com/
Patch 5:
* instead of void, used 'struct virtchnl2_create_vport' type for
vport_params_recvd and vport_params_reqd and removed the typecasting
* used u16/u32 as needed instead of int for variables which cannot be
negative and updated in all the places whereever applicable
Patch 6:
* changed the commit message to "add ptypes and MAC filter support"
* used the sender Signed-off-by as the last tag on all the patches
* removed unnecessary variables 0-init
* instead of fixing the code in this commit, fixed it in the commit
where the change was introduced first
* moved get_type_info struct on to the stack instead of memory alloc
* moved mutex_lock and ptype_info memory alloc outside while loop and
adjusted the return flow
* used 'break' instead of 'continue' in ptype id switch case
v2: https://lore.kernel.org/netdev/20230614171428.1504179-1-anthony.l.nguyen@intel.com/
Patch 2:
* added "Intel(R)" to the DRV_SUMMARY and Makefile.
Patch 4, 5, 6, 15:
* replaced IDPF_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for the
adapter related virtchnl opcodes.
* get the mutex lock in the virtchnl send thread itself instead of
in receive thread.
Patch 5, 6, 7, 8, 9, 11, 14, 15:
* replaced IDPF_VPORT_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for
the vport related virtchnl opcodes.
* get the mutex lock in the virtchnl send thread itself instead of
in receive thread.
Patch 6:
* converted get_ptype_info logic from 1:N to 1:1 message exchange for
better handling of mutex lock.
Patch 15:
* introduced 'stats_lock' spinlock to avoid concurrent stats update.
v1: https://lore.kernel.org/netdev/20230530234501.2680230-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Keguang Zhang says:
====================
Move Loongson1 MAC arch-code to the driver dir
In order to convert Loongson1 MAC platform devices to the devicetree
nodes, Loongson1 MAC arch-code should be moved to the driver dir.
Add dt-binding document and update MAINTAINERS file accordingly.
In other words, this patchset is a preparation for converting
Loongson1 platform devices to devicetree.
Changelog
V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt()
Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe()
Squash patch 4 into patch 2 and 3
V3 -> V4: Add Acked-by tag from Krzysztof Kozlowski
Add "|" to description part
Amend "phy-mode" property
Drop ls1x_dwmac_syscon definition and its instances
Drop three redundant fields from the ls1x_dwmac structure
Drop the ls1x_dwmac_init() method.
Update the dt-binding document entry of Loongson1 Ethernet
Some minor improvements
V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
and loongson,ls1c-emac.yaml (suggested by Serge Semin)
Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
Rename loongson,dwmac-syscon to loongson,ls1-syscon
Amend the title
Add description
Add Reviewed-by tag from Krzysztof Kozlowski
Change compatibles back to loongson,ls1b-syscon
and loongson,ls1c-syscon
Determine the device ID by physical
base address(suggested by Serge Semin)
Use regmap instead of regmap fields
Use syscon_regmap_lookup_by_phandle()
Some minor fixes
Update the entries of MAINTAINERS
V1 -> V2: Leave the Ethernet platform data for now
Make the syscon compatibles more specific
Fix "clock-names" and "interrupt-names" property
Rename the syscon property to "loongson,dwmac-syscon"
Drop "phy-handle" and "phy-mode" requirement
Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
to snps,dwmac.yaml
Fix the build errors due to CONFIG_OF being unset
Change struct reg_field definitions to const
Rename the syscon property to "loongson,dwmac-syscon"
Add MII PHY mode for LS1C
Improve the commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This glue driver is created based on the arch-code
implemented earlier with the platform-specific settings.
Use syscon for SYSCON register access.
And modify MAINTAINERS to add a new F: entry for this driver.
Partially based on the previous work by Serge Semin.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devicetree binding document for Loongson-1 Ethernet controller.
And modify MAINTAINERS to add a new F: entry for
Loongson1 dt-binding documents.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Loongson LS1B and LS1C compatibles for system controller.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ionic device supports a maximum buffer length of 16 bits (see
ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to
the receive rings, the function ionic_rx_fill() uses 16bit math when
calculating the number of pages to allocate for an RX descriptor,
given the interface's MTU setting. If the system PAGE_SIZE >= 64KB,
and the buf_info->page_offset is 0, the remain_len value will never
decrement from the original MTU value and the frag_len value will
always be 0, causing additional pages to be allocated as scatter-
gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures
have been observed here since a 64KB page should not normally
require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow the style used in the core kernel (e.g.
include/linux/etherdevice.h and include/linux/in6.h) for the PTP IPv6
and Ethernet addresses. No functional changes.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check if wlan.offload_enable and wlan.offload_disable callbacks are set
in mtk_wed_flow_add/mtk_wed_flow_remove since mt7996 will not rely
on them.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can be time consuming to track driver bugs, that might be detected
too late from this confusing warning in skb_try_coalesce()
WARN_ON_ONCE(delta < len);
Add sanity check in skb_add_rx_frag() and skb_coalesce_rx_frag()
to better track bug origin for CONFIG_DEBUG_NET=y builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding sk->sk_prot->release_cb() call from __sk_flush_backlog()
Paolo suggested using indirect call helpers to take care of
CONFIG_RETPOLINE=y case.
It turns out Google had such mitigation for years in release_sock(),
it is time to make this public :)
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the implementation of the optional proc fs in rawmidi, I forgot
that rmidi->ops itself is optional and can be NULL.
Add the proper NULL check for avoiding the Oops.
Fixes: fa030f666d24 ("ALSA: ump: Additional proc output")
Reported-and-tested-by: Mark Hills <mark@xwax.org>
Closes: https://lore.kernel.org/r/ef9118c3-a2eb-d0ff-1efa-cc5fb6416bde@xwax.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230916060725.11726-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
|
|
Puranjay Mohan says:
====================
arm32, bpf: add support for cpuv4 insns
Changes in V2 -> V3
- Added comments at places where there could be confustion.
- In the patch for DIV64, fix the if-else case that would never run.
- In the same patch use a single instruction to POP caller saved regs.
- Add a patch to change maintainership of ARM32 BPF JIT.
Changes in V1 -> V2:
- Fix coding style issues.
- Don't use tmp variable for src in emit_ldsx_r() as it is redundant.
- Optimize emit_ldsx_r() when offset can fit in immediate.
Add the support for cpuv4 instructions for ARM32 BPF JIT. 64-bit division
was not supported earlier so this series adds 64-bit DIV, SDIV, MOD, SMOD
instructions as well.
This series needs any one of the patches from [1] to disable zero-extension
for BPF_MEMSX to support ldsx.
The relevant selftests have passed expect ldsx_insn which needs fentry:
Tested on BeagleBone Black (ARMv7-A):
[root@alarm del]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@alarm del]# ./test_progs -a verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
#337/1 verifier_bswap/BSWAP, 16:OK
#337/2 verifier_bswap/BSWAP, 16 @unpriv:OK
#337/3 verifier_bswap/BSWAP, 32:OK
#337/4 verifier_bswap/BSWAP, 32 @unpriv:OK
#337/5 verifier_bswap/BSWAP, 64:OK
#337/6 verifier_bswap/BSWAP, 64 @unpriv:OK
#337 verifier_bswap:OK
#351/1 verifier_gotol/gotol, small_imm:OK
#351/2 verifier_gotol/gotol, small_imm @unpriv:OK
#351 verifier_gotol:OK
#359/1 verifier_ldsx/LDSX, S8:OK
#359/2 verifier_ldsx/LDSX, S8 @unpriv:OK
#359/3 verifier_ldsx/LDSX, S16:OK
#359/4 verifier_ldsx/LDSX, S16 @unpriv:OK
#359/5 verifier_ldsx/LDSX, S32:OK
#359/6 verifier_ldsx/LDSX, S32 @unpriv:OK
#359/7 verifier_ldsx/LDSX, S8 range checking, privileged:OK
#359/8 verifier_ldsx/LDSX, S16 range checking:OK
#359/9 verifier_ldsx/LDSX, S16 range checking @unpriv:OK
#359/10 verifier_ldsx/LDSX, S32 range checking:OK
#359/11 verifier_ldsx/LDSX, S32 range checking @unpriv:OK
#359 verifier_ldsx:OK
#370/1 verifier_movsx/MOV32SX, S8:OK
#370/2 verifier_movsx/MOV32SX, S8 @unpriv:OK
#370/3 verifier_movsx/MOV32SX, S16:OK
#370/4 verifier_movsx/MOV32SX, S16 @unpriv:OK
#370/5 verifier_movsx/MOV64SX, S8:OK
#370/6 verifier_movsx/MOV64SX, S8 @unpriv:OK
#370/7 verifier_movsx/MOV64SX, S16:OK
#370/8 verifier_movsx/MOV64SX, S16 @unpriv:OK
#370/9 verifier_movsx/MOV64SX, S32:OK
#370/10 verifier_movsx/MOV64SX, S32 @unpriv:OK
#370/11 verifier_movsx/MOV32SX, S8, range_check:OK
#370/12 verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
#370/13 verifier_movsx/MOV32SX, S16, range_check:OK
#370/14 verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
#370/15 verifier_movsx/MOV32SX, S16, range_check 2:OK
#370/16 verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
#370/17 verifier_movsx/MOV64SX, S8, range_check:OK
#370/18 verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
#370/19 verifier_movsx/MOV64SX, S16, range_check:OK
#370/20 verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
#370/21 verifier_movsx/MOV64SX, S32, range_check:OK
#370/22 verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
#370/23 verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
#370/24 verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
#370 verifier_movsx:OK
#382/1 verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
#382/2 verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
#382/3 verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
#382/4 verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
#382/5 verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
#382/6 verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
#382/7 verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
#382/8 verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
#382/9 verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
#382/10 verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
#382/11 verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
#382/12 verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
#382/13 verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
#382/14 verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
#382/15 verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
#382/16 verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
#382/17 verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
#382/18 verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
#382/19 verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
#382/20 verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
#382/21 verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
#382/22 verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
#382/23 verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
#382/24 verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
#382/25 verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
#382/26 verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
#382/27 verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
#382/28 verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
#382/29 verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
#382/30 verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
#382/31 verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
#382/32 verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
#382/33 verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
#382/34 verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
#382/35 verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
#382/36 verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
#382/37 verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
#382/38 verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
#382/39 verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
#382/40 verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
#382/41 verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
#382/42 verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
#382/43 verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
#382/44 verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
#382/45 verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
#382/46 verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
#382/47 verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
#382/48 verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
#382/49 verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
#382/50 verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
#382/51 verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
#382/52 verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
#382/53 verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
#382/54 verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
#382/55 verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
#382/56 verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
#382/57 verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
#382/58 verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
#382/59 verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
#382/60 verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
#382/61 verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
#382/62 verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
#382/63 verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
#382/64 verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
#382/65 verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
#382/66 verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
#382/67 verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
#382/68 verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
#382/69 verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
#382/70 verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
#382/71 verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
#382/72 verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
#382/73 verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
#382/74 verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
#382/75 verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
#382/76 verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
#382/77 verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
#382/78 verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
#382/79 verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
#382/80 verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
#382/81 verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
#382/82 verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
#382/83 verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
#382/84 verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
#382/85 verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
#382/86 verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
#382/87 verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
#382/88 verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
#382/89 verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
#382/90 verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
#382/91 verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
#382/92 verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
#382/93 verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
#382/94 verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
#382/95 verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
#382/96 verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
#382/97 verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
#382/98 verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
#382/99 verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
#382/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
#382/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
#382/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
#382/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
#382/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
#382/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
#382/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
#382/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
#382/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
#382/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
#382/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
#382/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
#382/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
#382/113 verifier_sdiv/SDIV32, zero divisor:OK
#382/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
#382/115 verifier_sdiv/SDIV64, zero divisor:OK
#382/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
#382/117 verifier_sdiv/SMOD32, zero divisor:OK
#382/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
#382/119 verifier_sdiv/SMOD64, zero divisor:OK
#382/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
#382 verifier_sdiv:OK
Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED
As the selftests don't compile for 32-bit architectures without
modifications due to long being 32-bit,
I have added new tests to lib/test_bpf.c for cpuv4 insns, all are passing:
test_bpf: Summary: 1052 PASSED, 0 FAILED, [891/1040 JIT'ed]
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
[1] https://lore.kernel.org/all/mb61p5y4u3ptd.fsf@amazon.com/
====================
Link: https://lore.kernel.org/r/20230907230550.1417590-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As Shubham has been inactive since 2017, Add myself for ARM32 BPF JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20230907230550.1417590-10-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF JITs now support cpuv4 instructions. Add tests for these new
instructions to the test suite:
1. Sign extended Load
2. Sign extended Mov
3. Unconditional byte swap
4. Unconditional jump with 32-bit offset
5. Signed division and modulo
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20230907230550.1417590-9-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that all the cpuv4 instructions are supported by the arm32 JIT,
enable the selftests for arm32.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20230907230550.1417590-8-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ARM32 doesn't have instructions to do 64-bit/64-bit divisions. So, to
implement the following instructions:
BPF_ALU64 | BPF_DIV
BPF_ALU64 | BPF_MOD
BPF_ALU64 | BPF_SDIV
BPF_ALU64 | BPF_SMOD
We implement the above instructions by doing function calls to div64_u64()
and div64_u64_rem() for unsigned division/mod and calls to div64_s64()
for signed division/mod.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-7-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuv4 added a new BPF_SDIV instruction that does signed division.
The encoding is similar to BPF_DIV but BPF_SDIV sets offset=1.
ARM32 already supports 32-bit BPF_DIV which can be easily extended to
support BPF_SDIV as ARM32 has the SDIV instruction. When the CPU is not
ARM-v7, we implement that SDIV/SMOD with the function call similar to
the implementation of DIV/MOD.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-6-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuv4 added a new unconditional bswap instruction with following
behaviour:
BPF_ALU64 | BPF_TO_LE | BPF_END with imm = 16/32/64 means:
dst = bswap16(dst)
dst = bswap32(dst)
dst = bswap64(dst)
As we already support converting to big-endian from little-endian we can
use the same for unconditional bswap. just treat the unconditional scenario
the same as big-endian conversion.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-5-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuv4 added a new BPF_MOVSX instruction that sign extends the src
before moving it to the destination.
BPF_ALU | BPF_MOVSX sign extends 8-bit and 16-bit operands into 32-bit
operands, and zeroes the remaining upper 32 bits.
BPF_ALU64 | BPF_MOVSX sign extends 8-bit, 16-bit, and 32-bit operands
into 64-bit operands.
The offset field of the instruction is used to tell the number of bit to
use for sign-extension. BPF_MOV and BPF_MOVSX have the same code but the
former sets offset to 0 and the later one sets the offset to 8, 16 or 32
The behaviour of this instruction is dst = (s8,s16,s32)src
On ARM32 the implementation uses LSH and ARSH to extend the 8/16 bits to
a 32-bit register and then it is sign extended to the upper 32-bit
register using ARSH. For 32-bit we just move it to the destination
register and use ARSH to extend it to the upper 32-bit register.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-4-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuv4 added the support of an instruction that is similar to load
but also sign-extends the result after the load.
BPF_MEMSX | <size> | BPF_LDX means dst = *(signed size *) (src + offset)
here <size> can be one of BPF_B, BPF_H, BPF_W.
ARM32 has instructions to load a byte or a half word with sign
extension into a 32bit register. As the JIT uses two 32 bit registers
to simulate a 64-bit BPF register, an extra instruction is emitted to
sign-extent the result up to the second register.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuv4 adds unconditional jump with 32-bit offset where the immediate
field of the instruction is to be used to calculate the jump offset.
BPF_JA | BPF_K | BPF_JMP32 => gotol +imm => PC += imm.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230907230550.1417590-2-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Use correct order when encoding NFSv4 RENAME change_info
- Fix a potential oops during NFSD shutdown
* tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix possible oops when nfsd/pool_stats is closed.
nfsd: fix change_info in NFSv4 RENAME replies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the handling of block devices in the test_resume mode of
hibernation (Chen Yu)"
* tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix the exclusive get block device in test_resume mode
PM: hibernate: Rename function parameter from snapshot_test to exclusive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a thermal core breakage introduced by one of the recent
changes, amend those changes by adding 'const' to a new callback
argument and fix two memory leaks.
Specifics:
- Unbreak disabled trip point check in handle_thermal_trip() that may
cause it to skip enabled trip points (Rafael Wysocki)
- Add missing of_node_put() to of_find_trip_id() and
thermal_of_for_each_cooling_maps() that each break out of a
for_each_child_of_node() loop without dropping the reference to the
child object (Julia Lawall)
- Constify the recently added trip argument of the .get_trend()
thermal zone callback (Rafael Wysocki)"
* tag 'thermal-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix disabled trip point check in handle_thermal_trip()
thermal: Constify the trip argument of the .get_trend() zone callback
thermal/of: add missing of_node_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core retrieve_deps() UAF race due to missing locking of a DM
table's list of devices that is managed using dm_{get,put}_device.
- Revert DM core's half-baked RCU optimization if IO submitter has set
REQ_NOWAIT. Can be revisited, and properly justified, after
comprehensively auditing all of DM to also pass GFP_NOWAIT for any
allocations if REQ_NOWAIT used.
* tag 'for-6.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: don't attempt to queue IO under RCU protection
dm: fix a race condition in retrieve_deps
|
|
Pull block fixes from Jens Axboe:
- NVMe pull via Keith:
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)
- MD pull via Song fixing regressions with both 6.5 and 6.6
- Fix a use-after-free regression in resizing blk-mq tags (Chengming)
* tag 'block-6.6-2023-09-15' of git://git.kernel.dk/linux:
nvme: avoid bogus CRTO values
md: Put the right device in md_seq_next
nvme-pci: do not set the NUMA node of device if it has none
blk-mq: fix tags UAF when shrinking q->nr_hw_queues
md/raid1: fix error: ISO C90 forbids mixed declarations
md: fix warning for holder mismatch from export_rdev()
md: don't dereference mddev after export_rdev()
nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
nvme: host: hwmon: constify pointers to hwmon_channel_info
nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing a regression with poll first, recvmsg, and
using a provided buffer"
* tag 'io_uring-6.6-2023-09-15' of git://git.kernel.dk/linux:
io_uring/net: fix iter retargeting for selected buf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A change applied to v6.5 kernel brings an issue that usual GFP
allocation is done in atomic context under acquired spin-lock. Let us
revert it"
* tag 'firewire-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
Revert "firewire: core: obsolete usage of GFP_ATOMIC at building node tree"
|
|
Pull drm fixes from Dave Airlie:
"Regular rc2 fixes pull, mostly made up of amdgpu stuff, one i915, and
a bunch of others, one vkms locking violation is reverted.
connector:
- doc fix
exec:
- workaround lockdep issue
tests:
- fix a UAF
vkms:
- revert hrtimer fix
fbdev:
- g364fb: fix build failure with mips
i915:
- Only check eDP HPD when AUX CH is shared.
amdgpu:
- GC 9.4.3 fixes
- Fix white screen issues with S/G display on system with >= 64G of ram
- Replay fixes
- SMU 13.0.6 fixes
- AUX backlight fix
- NBIO 4.3 SR-IOV fixes for HDP
- RAS fixes
- DP MST resume fix
- Fix segfault on systems with no vbios
- DPIA fixes
amdkfd:
- CWSR grace period fix
- Unaligned doorbell fix
- CRIU fix for GFX11
- Add missing TLB flush on gfx10 and newer
radeon:
- make fence wait in suballocator uninterrruptable
gm12u320:
- Fix the timeout usage for usb_bulk_msg()"
* tag 'drm-fixes-2023-09-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/tests: helpers: Avoid a driver uaf
Revert "drm/vkms: Fix race-condition between the hrtimer and the atomic commit"
drm/amdkfd: Insert missing TLB flush on GFX10 and later
drm/i915: Only check eDP HPD when AUX CH is shared
drm/amd/display: Fix 2nd DPIA encoder Assignment
drm/amd/display: Add DPIA Link Encoder Assignment Fix
drm/amd/display: fix replay_mode kernel-doc warning
drm/amdgpu: Handle null atom context in VBIOS info ioctl
drm/amdkfd: Checkpoint and restore queues on GFX11
drm/amd/display: Adjust the MST resume flow
drm/amdgpu: fallback to old RAS error message for aqua_vanjaram
drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV
drm/amdgpu/soc21: don't remap HDP registers for SR-IOV
drm/amd/display: Don't check registers, if using AUX BL control
drm/amdgpu: fix retry loop test
drm/amd/display: Add dirty rect support for Replay
Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"
drm/amd/display: fix the white screen issue when >= 64GB DRAM
drm/amdkfd: Update CU masking for GFX 9.4.3
drm/amdkfd: Update cache info reporting for GFX v9.4.3
...
|
|
On 64-bit systems, the compiler will complain that the comparison
between SIZE_MAX and the 32-bit unsigned int 'len' is unnecessary.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This reverts commit e87cf8a28e7592bd19064e8181324ae26bc02932.
This commit was added to silence a tautological comparison warning, but
removing the 'len' value check before calling xdr_inline_decode() is
really not what we want.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Missing x86 patch for the runtime cleanup that was merged in -rc1
- Kconfig tweak for kexec on x86 so EFI support does not get disabled
inadvertently
- Use the right EFI memory type for the unaccepted memory table so
kexec/kdump exposes it to the crash kernel as well
- Work around EFI implementations which do not implement
QueryVariableInfo, which is now called by statfs() on efivarfs
* tag 'efi-fixes-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: fix statfs() on efivarfs
efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table
efi/x86: Ensure that EFI_RUNTIME_MAP is enabled for kexec
efi/x86: Move EFI runtime call setup/teardown helpers out of line
|
|
dm looks up the table for IO based on the request type, with an
assumption that if the request is marked REQ_NOWAIT, it's fine to
attempt to submit that IO while under RCU read lock protection. This
is not OK, as REQ_NOWAIT just means that we should not be sleeping
waiting on other IO, it does not mean that we can't potentially
schedule.
A simple test case demonstrates this quite nicely:
int main(int argc, char *argv[])
{
struct iovec iov;
int fd;
fd = open("/dev/dm-0", O_RDONLY | O_DIRECT);
posix_memalign(&iov.iov_base, 4096, 4096);
iov.iov_len = 4096;
preadv2(fd, &iov, 1, 0, RWF_NOWAIT);
return 0;
}
which will instantly spew:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5580, name: dm-nowait
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
INFO: lockdep is turned off.
CPU: 7 PID: 5580 Comm: dm-nowait Not tainted 6.6.0-rc1-g39956d2dcd81 #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x11d/0x1b0
__might_resched+0x3c3/0x5e0
? preempt_count_sub+0x150/0x150
mempool_alloc+0x1e2/0x390
? mempool_resize+0x7d0/0x7d0
? lock_sync+0x190/0x190
? lock_release+0x4b7/0x670
? internal_get_user_pages_fast+0x868/0x2d40
bio_alloc_bioset+0x417/0x8c0
? bvec_alloc+0x200/0x200
? internal_get_user_pages_fast+0xb8c/0x2d40
bio_alloc_clone+0x53/0x100
dm_submit_bio+0x27f/0x1a20
? lock_release+0x4b7/0x670
? blk_try_enter_queue+0x1a0/0x4d0
? dm_dax_direct_access+0x260/0x260
? rcu_is_watching+0x12/0xb0
? blk_try_enter_queue+0x1cc/0x4d0
__submit_bio+0x239/0x310
? __bio_queue_enter+0x700/0x700
? kvm_clock_get_cycles+0x40/0x60
? ktime_get+0x285/0x470
submit_bio_noacct_nocheck+0x4d9/0xb80
? should_fail_request+0x80/0x80
? preempt_count_sub+0x150/0x150
? lock_release+0x4b7/0x670
? __bio_add_page+0x143/0x2d0
? iov_iter_revert+0x27/0x360
submit_bio_noacct+0x53e/0x1b30
submit_bio_wait+0x10a/0x230
? submit_bio_wait_endio+0x40/0x40
__blkdev_direct_IO_simple+0x4f8/0x780
? blkdev_bio_end_io+0x4c0/0x4c0
? stack_trace_save+0x90/0xc0
? __bio_clone+0x3c0/0x3c0
? lock_release+0x4b7/0x670
? lock_sync+0x190/0x190
? atime_needs_update+0x3bf/0x7e0
? timestamp_truncate+0x21b/0x2d0
? inode_owner_or_capable+0x240/0x240
blkdev_direct_IO.part.0+0x84a/0x1810
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
? blkdev_read_iter+0x40d/0x530
? reacquire_held_locks+0x4e0/0x4e0
? __blkdev_direct_IO_simple+0x780/0x780
? rcu_is_watching+0x12/0xb0
? __mark_inode_dirty+0x297/0xd50
? preempt_count_add+0x72/0x140
blkdev_read_iter+0x2a4/0x530
do_iter_readv_writev+0x2f2/0x3c0
? generic_copy_file_range+0x1d0/0x1d0
? fsnotify_perm.part.0+0x25d/0x630
? security_file_permission+0xd8/0x100
do_iter_read+0x31b/0x880
? import_iovec+0x10b/0x140
vfs_readv+0x12d/0x1a0
? vfs_iter_read+0xb0/0xb0
? rcu_is_watching+0x12/0xb0
? rcu_is_watching+0x12/0xb0
? lock_release+0x4b7/0x670
do_preadv+0x1b3/0x260
? do_readv+0x370/0x370
__x64_sys_preadv2+0xef/0x150
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5af41ad806
Code: 41 54 41 89 fc 55 44 89 c5 53 48 89 cb 48 83 ec 18 80 3d e4 dd 0d 00 00 74 7a 45 89 c1 49 89 ca 45 31 c0 b8 47 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 be 00 00 00 48 85 c0 79 4a 48 8b 0d da 55
RSP: 002b:00007ffd3145c7f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000147
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5af41ad806
RDX: 0000000000000001 RSI: 00007ffd3145c850 RDI: 0000000000000003
RBP: 0000000000000008 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffd3145c850 R14: 000055f5f0431dd8 R15: 0000000000000001
</TASK>
where in fact it is dm itself that attempts to allocate a bio clone with
GFP_NOIO under the rcu read lock, regardless of the request type.
Fix this by getting rid of the special casing for REQ_NOWAIT, and just
use the normal SRCU protected table lookup. Get rid of the bio based
table locking helpers at the same time, as they are now unused.
Cc: stable@vger.kernel.org
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A relatively small SELinux patch to fix an issue with a
vfs/LSM/SELinux patch that went upstream during the recent merge
window.
The short version is that the original patch changed how we
initialized mount options to resolve a NFS issue and we inadvertently
broke a use case due to the changed behavior.
The fix restores this behavior for the cases that require it while
keeping the original NFS fix in place"
* tag 'selinux-pr-20230914' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix handling of empty opts in selinux_fs_context_submount()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to align kexec'd kernels to PMD boundries
- The T-Head dcache.cva encoding was incorrect, it has been fixed to
invalidate all caches (as opposed to just the L1)
* tag 'riscv-for-linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: errata: fix T-Head dcache.cva encoding
riscv: kexec: Align the kexeced kernel entry
|
|
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no fundamental reason, why multi-buffer XDP and XDP kfunc RX hints
cannot coexist in a single program.
Allow those features to be used together by modifying the flags condition
for dev-bound-only programs, segments are still prohibited for fully
offloaded programs, hence additional check.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/CAKH8qBuzgtJj=OKMdsxEkyML36VsAuZpcrsXcyqjdKXSJCBq=Q@mail.gmail.com/
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230915083914.65538-1-larysa.zaremba@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Stanislav Fomichev says:
====================
Extend netdev netlink family to expose the bitmask with the
kfuncs that the device implements. The source of truth is the
device's xdp_metadata_ops. There is some amount of auto-generated
netlink boilerplate; the change itself is super minimal.
v2:
- add netdev->xdp_metadata_ops NULL check when dumping to netlink (Martin)
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The tool can be used to verify that everything works end to end.
Unrelated updates:
- include tools/include/uapi to pick the latest kernel uapi headers
- print "xdp-features" and "xdp-rx-metadata-features" so it's clear
which bitmask is being dumped
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-4-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
No functional changes.
Instead of having hand-crafted code in bpf_dev_bound_resolve_kfunc,
move kfunc <> xmo handler relationship into XDP_METADATA_KFUNC_xxx.
This way, any time new kfunc is added, we don't have to touch
bpf_dev_bound_resolve_kfunc.
Also document XDP_METADATA_KFUNC_xxx arguments since we now have
more than two and it might be confusing what is what.
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Userspace applications indicate their multi-buffer capability to xsk
using XSK_USE_SG socket bind flag. For sockets using shared umem the
bind flag may contain XSK_USE_SG only for the first socket. For any
subsequent socket the only option supported is XDP_SHARED_UMEM.
Add option XDP_UMEM_SG_FLAG in umem config flags to store the
multi-buffer handling capability when indicated by XSK_USE_SG option in
bing flag by the first socket. Use this to derive multi-buffer capability
for subsequent sockets in xsk core.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Fixes: 81470b5c3c66 ("xsk: introduce XSK_USE_SG bind flag for xsk socket")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230907035032.2627879-1-tirthendu.sarkar@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dan reported Smatch static checker warning due to missing error
value set in uprobe multi link's get_pid_task error path.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/c5ffa7c0-6b06-40d5-aca2-63833b5cd9af@moroto.mountain/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230915101420.1193800-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For global per-cpu allocator, the size of free object in free list
doesn't match with unit_size and now there is no way to get the size of
per-cpu pointer saved in free object, so just skip the checking.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/bpf/20230913133436.0eeec4cb@canb.auug.org.au/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230913135943.3137292-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_nf testcase fails on s390x: bpf_skb_ct_lookup() cannot find the entry
that was added by bpf_ct_insert_entry() within the same BPF function.
The reason is that this entry is deleted by nf_ct_gc_expired().
The CT timeout starts ticking after the CT confirmation; therefore
nf_conn.timeout is initially set to the timeout value, and
__nf_conntrack_confirm() sets it to the deadline value.
bpf_ct_insert_entry() sets IPS_CONFIRMED_BIT, but does not adjust the
timeout, making its value meaningless and causing false positives.
Fix the problem by making bpf_ct_insert_entry() adjust the timeout,
like __nf_conntrack_confirm().
Fixes: 2cdaa3eefed8 ("netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/20230830011128.1415752-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If port VLAN is configured on a VF then any other VLANs on top of this VF
are broken.
During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
but this reset occurs too early, prior setting of vf->info.pvid field
and because this field can be zero during i40e_vc_get_vf_resources_msg()
then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
This is wrong because iavf driver should not report VLAN offloading
capability when port VLAN is configured as i40e does not support QinQ
offloading.
Fix the issue by moving VF reset after setting of vf->port_vlan_id
field.
Without this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: on
tx-vlan-offload: on
$ dmesg -l err | grep iavf
[1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
With this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: off [requested on]
tx-vlan-offload: off [requested on]
$ dmesg -l err | grep iavf
Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
