summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-15ipv6: lockless IPV6_MULTICAST_LOOP implementationEric Dumazet
Add inet6_{test|set|clear|assign}_bit() helpers. Note that I am using bits from inet->inet_flags, this might change in the future if we need more flags. While solving data-races accessing np->mc_loop, this patch also allows to implement lockless accesses to np->mcast_hops in the following patch. Also constify sk_mc_loop() argument. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15ipv6: lockless IPV6_UNICAST_HOPS implementationEric Dumazet
Some np->hop_limit accesses are racy, when socket lock is not held. Add missing annotations and switch to full lockless implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15panic: Reenable preemption in WARN slowpathLukas Wunner
Commit: 5a5d7e9badd2 ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG") amended warn_slowpath_fmt() to disable preemption until the WARN splat has been emitted. However the commit neglected to reenable preemption in the !fmt codepath, i.e. when a WARN splat is emitted without additional format string. One consequence is that users may see more splats than intended. E.g. a WARN splat emitted in a work item results in at least two extra splats: BUG: workqueue leaked lock or atomic (emitted by process_one_work()) BUG: scheduling while atomic (emitted by worker_thread() -> schedule()) Ironically the point of the commit was to *avoid* extra splats. ;) Fix it. Fixes: 5a5d7e9badd2 ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/3ec48fde01e4ee6505f77908ba351bad200ae3d1.1694763684.git.lukas@wunner.de
2023-09-15ALSA: hda: cs35l56: Fix missing RESET GPIO if _SUB is missingRichard Fitzgerald
In cs35l56_hda_read_acpi() do not return if ACPI _SUB is missing. A missing _SUB means that the driver cannot load a system-specific firmware, because the firmware is identified by the _SUB. But it can fallback to a generic firmware. Unfortunately this was being handled by immediately returning 0, which would skip the remaining ACPI configuration in cs35l56_hda_read_acpi() and so it would not get the RESET GPIO. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Link: https://lore.kernel.org/r/20230914152525.20829-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-15ALSA: hda: Disable power save for solving pop issue on Lenovo ThinkCentre M70qKailang Yang
Lenovo ThinkCentre M70q had boot up pop noise. Disable power save will solve pop issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-15selftests: tls: swap the TX and RX sockets in some testsSabrina Dubroca
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through the self->cfd socket (only configured with TLS_RX) and to receive through the self->fd socket (only configured with TLS_TX), so they're not using kTLS at all. Swap the sockets. Fixes: 7f657d5bf507 ("selftests: tls: add selftests for TLS sockets") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15smb3: fix some minor typos and repeated wordsSteve French
Minor cleanup pointed out by checkpatch (repeated words, missing blank lines) in smb2pdu.c and old header location referred to in transport.c Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-15Merge branch 'sparx5-leaks'David S. Miller
Jinjie Ruan says: ==================== net: microchip: sparx5: Fix some memory leaks in vcap_api_kunit There are some memory leaks in vcap_api_kunit, this patchset fixes them. Changes in v3: - Fix the typo in patch 3, from "export" to "vcap enabled port". - Fix the typo in patch 4, from "vcap_dup_rule" to "vcap_alloc_rule". Changes in v2: - Adhere to the 80 character limit in vcap_free_caf() - Fix kernel test robot reported warnings in test_vcap_xn_rule_creator() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15net: microchip: sparx5: Fix possible memory leaks in vcap_api_kunitJinjie Ruan
Inject fault while probing kunit-example-test.ko, the duprule which is allocated by kzalloc in vcap_dup_rule() of test_vcap_xn_rule_creator() is not freed, and it cause the memory leaks below. Use vcap_del_rule() to free them as other functions do it. unreferenced object 0xffff6eb4846f6180 (size 192): comm "kunit_try_catch", pid 405, jiffies 4294895522 (age 880.004s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 0a 00 00 00 f4 01 00 00 .'.............. 00 00 00 00 00 00 00 00 98 61 6f 84 b4 6e ff ff .........ao..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000d2ac4ccb>] vcap_api_rule_insert_in_order_test+0xa4/0x114 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4846f6240 (size 192): comm "kunit_try_catch", pid 405, jiffies 4294895524 (age 879.996s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 14 00 00 00 90 01 00 00 .'.............. 00 00 00 00 00 00 00 00 58 62 6f 84 b4 6e ff ff ........Xbo..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<0000000052e6ad35>] vcap_api_rule_insert_in_order_test+0xbc/0x114 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4846f6300 (size 192): comm "kunit_try_catch", pid 405, jiffies 4294895524 (age 879.996s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 63 6f 84 b4 6e ff ff .........co..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<000000001b0895d4>] vcap_api_rule_insert_in_order_test+0xd4/0x114 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4846f63c0 (size 192): comm "kunit_try_catch", pid 405, jiffies 4294895524 (age 880.012s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 28 00 00 00 c8 00 00 00 .'......(....... 00 00 00 00 00 00 00 00 d8 63 6f 84 b4 6e ff ff .........co..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000134c151f>] vcap_api_rule_insert_in_order_test+0xec/0x114 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4845fc180 (size 192): comm "kunit_try_catch", pid 407, jiffies 4294895527 (age 880.000s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 14 00 00 00 c8 00 00 00 .'.............. 00 00 00 00 00 00 00 00 98 c1 5f 84 b4 6e ff ff .........._..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000fa5f64d3>] vcap_api_rule_insert_reverse_order_test+0xc8/0x600 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4845fc240 (size 192): comm "kunit_try_catch", pid 407, jiffies 4294895527 (age 880.000s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 58 c2 5f 84 b4 6e ff ff ........X._..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000453dcd80>] vcap_add_rule+0x134/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000a7db42de>] vcap_api_rule_insert_reverse_order_test+0x108/0x600 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4845fc300 (size 192): comm "kunit_try_catch", pid 407, jiffies 4294895527 (age 880.000s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 28 00 00 00 90 01 00 00 .'......(....... 00 00 00 00 00 00 00 00 18 c3 5f 84 b4 6e ff ff .........._..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000453dcd80>] vcap_add_rule+0x134/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000ea416c94>] vcap_api_rule_insert_reverse_order_test+0x150/0x600 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb4845fc3c0 (size 192): comm "kunit_try_catch", pid 407, jiffies 4294895527 (age 880.020s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 32 00 00 00 f4 01 00 00 .'......2....... 00 00 00 00 00 00 00 00 d8 c3 5f 84 b4 6e ff ff .........._..n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000453dcd80>] vcap_add_rule+0x134/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<00000000764a39b4>] vcap_api_rule_insert_reverse_order_test+0x198/0x600 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb484cd4240 (size 192): comm "kunit_try_catch", pid 413, jiffies 4294895543 (age 879.956s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 58 42 cd 84 b4 6e ff ff ........XB...n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<0000000023976dd4>] vcap_api_rule_remove_in_front_test+0x158/0x658 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 unreferenced object 0xffff6eb484cd4300 (size 192): comm "kunit_try_catch", pid 413, jiffies 4294895543 (age 879.956s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 28 00 00 00 c8 00 00 00 .'......(....... 00 00 00 00 00 00 00 00 18 43 cd 84 b4 6e ff ff .........C...n.. backtrace: [<00000000f1b5b86e>] slab_post_alloc_hook+0xb8/0x368 [<00000000c56cdd9a>] __kmem_cache_alloc_node+0x174/0x290 [<0000000046ef1b64>] kmalloc_trace+0x40/0x164 [<000000008565145b>] vcap_dup_rule+0x38/0x210 [<00000000bd9e1f12>] vcap_add_rule+0x29c/0x32c [<0000000070a539b1>] test_vcap_xn_rule_creator.constprop.43+0x120/0x330 [<000000000b4760ff>] vcap_api_rule_remove_in_front_test+0x170/0x658 [<000000000f88f9cb>] kunit_try_run_case+0x50/0xac [<00000000e848de5a>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000058a88b6b>] kthread+0x124/0x130 [<00000000891cf28a>] ret_from_fork+0x10/0x20 Fixes: dccc30cc4906 ("net: microchip: sparx5: Add KUNIT test of counters and sorted rules") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15net: microchip: sparx5: Fix possible memory leaks in test_vcap_xn_rule_creator()Jinjie Ruan
Inject fault while probing kunit-example-test.ko, the rule which is allocated by kzalloc in vcap_alloc_rule(), the field which is allocated by kzalloc in vcap_rule_add_action() and vcap_rule_add_key() is not freed, and it cause the memory leaks below. Use vcap_free_rule() to free them as other drivers do it. And since the return rule of test_vcap_xn_rule_creator() is not used, remove it and switch to void. unreferenced object 0xffff058383334240 (size 192): comm "kunit_try_catch", pid 309, jiffies 4294894222 (age 639.800s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 14 00 00 00 90 01 00 00 .'.............. 00 00 00 00 00 00 00 00 00 81 93 84 83 05 ff ff ................ backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000648fefae>] vcap_alloc_rule+0x17c/0x26c [<000000004da16164>] test_vcap_xn_rule_creator.constprop.43+0xac/0x328 [<00000000231b1097>] vcap_api_rule_insert_in_order_test+0xcc/0x184 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583849380c0 (size 64): comm "kunit_try_catch", pid 309, jiffies 4294894222 (age 639.800s) hex dump (first 32 bytes): 40 81 93 84 83 05 ff ff 68 42 33 83 83 05 ff ff @.......hB3..... 22 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 "............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000ee41df9e>] vcap_rule_add_action+0x104/0x178 [<000000001cc1bb38>] test_vcap_xn_rule_creator.constprop.43+0xd8/0x328 [<00000000231b1097>] vcap_api_rule_insert_in_order_test+0xcc/0x184 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff058384938100 (size 64): comm "kunit_try_catch", pid 309, jiffies 4294894222 (age 639.800s) hex dump (first 32 bytes): 80 81 93 84 83 05 ff ff 58 42 33 83 83 05 ff ff ........XB3..... 7d 00 00 00 01 00 00 00 02 00 00 00 ff 00 00 00 }............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<0000000043c78991>] vcap_rule_add_key+0x104/0x180 [<00000000ba73cfbe>] vcap_add_type_keyfield+0xfc/0x128 [<000000002b00f7df>] vcap_val_rule+0x274/0x3e8 [<00000000e67d2ff5>] test_vcap_xn_rule_creator.constprop.43+0xf0/0x328 [<00000000231b1097>] vcap_api_rule_insert_in_order_test+0xcc/0x184 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583833b6240 (size 192): comm "kunit_try_catch", pid 311, jiffies 4294894225 (age 639.844s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 40 91 8f 84 83 05 ff ff ........@....... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000648fefae>] vcap_alloc_rule+0x17c/0x26c [<000000004da16164>] test_vcap_xn_rule_creator.constprop.43+0xac/0x328 [<00000000509de3f4>] vcap_api_rule_insert_reverse_order_test+0x10c/0x654 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583848f9100 (size 64): comm "kunit_try_catch", pid 311, jiffies 4294894225 (age 639.844s) hex dump (first 32 bytes): 80 91 8f 84 83 05 ff ff 68 62 3b 83 83 05 ff ff ........hb;..... 22 00 00 00 01 00 00 00 00 00 00 00 a5 b4 ff ff "............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000ee41df9e>] vcap_rule_add_action+0x104/0x178 [<000000001cc1bb38>] test_vcap_xn_rule_creator.constprop.43+0xd8/0x328 [<00000000509de3f4>] vcap_api_rule_insert_reverse_order_test+0x10c/0x654 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583848f9140 (size 64): comm "kunit_try_catch", pid 311, jiffies 4294894225 (age 639.844s) hex dump (first 32 bytes): c0 91 8f 84 83 05 ff ff 58 62 3b 83 83 05 ff ff ........Xb;..... 7d 00 00 00 01 00 00 00 02 00 00 00 ff 00 00 00 }............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<0000000043c78991>] vcap_rule_add_key+0x104/0x180 [<00000000ba73cfbe>] vcap_add_type_keyfield+0xfc/0x128 [<000000002b00f7df>] vcap_val_rule+0x274/0x3e8 [<00000000e67d2ff5>] test_vcap_xn_rule_creator.constprop.43+0xf0/0x328 [<00000000509de3f4>] vcap_api_rule_insert_reverse_order_test+0x10c/0x654 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff05838264e0c0 (size 192): comm "kunit_try_catch", pid 313, jiffies 4294894230 (age 639.864s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 0a 00 00 00 f4 01 00 00 .'.............. 00 00 00 00 00 00 00 00 40 3a 97 84 83 05 ff ff ........@:...... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000648fefae>] vcap_alloc_rule+0x17c/0x26c [<000000004da16164>] test_vcap_xn_rule_creator.constprop.43+0xac/0x328 [<00000000a29794d8>] vcap_api_rule_remove_at_end_test+0xbc/0xb48 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff058384973a80 (size 64): comm "kunit_try_catch", pid 313, jiffies 4294894230 (age 639.864s) hex dump (first 32 bytes): e8 e0 64 82 83 05 ff ff e8 e0 64 82 83 05 ff ff ..d.......d..... 22 00 00 00 01 00 00 00 00 00 00 00 00 80 ff ff "............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000ee41df9e>] vcap_rule_add_action+0x104/0x178 [<000000001cc1bb38>] test_vcap_xn_rule_creator.constprop.43+0xd8/0x328 [<00000000a29794d8>] vcap_api_rule_remove_at_end_test+0xbc/0xb48 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff058384973a40 (size 64): comm "kunit_try_catch", pid 313, jiffies 4294894230 (age 639.880s) hex dump (first 32 bytes): 80 39 97 84 83 05 ff ff d8 e0 64 82 83 05 ff ff .9........d..... 7d 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 }............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<0000000043c78991>] vcap_rule_add_key+0x104/0x180 [<0000000094335477>] vcap_add_type_keyfield+0xbc/0x128 [<000000002b00f7df>] vcap_val_rule+0x274/0x3e8 [<00000000e67d2ff5>] test_vcap_xn_rule_creator.constprop.43+0xf0/0x328 [<00000000a29794d8>] vcap_api_rule_remove_at_end_test+0xbc/0xb48 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583832fa240 (size 192): comm "kunit_try_catch", pid 315, jiffies 4294894233 (age 639.920s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 14 00 00 00 90 01 00 00 .'.............. 00 00 00 00 00 00 00 00 00 a1 8b 84 83 05 ff ff ................ backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000648fefae>] vcap_alloc_rule+0x17c/0x26c [<000000004da16164>] test_vcap_xn_rule_creator.constprop.43+0xac/0x328 [<00000000be638a45>] vcap_api_rule_remove_in_middle_test+0xc4/0xb80 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583848ba0c0 (size 64): comm "kunit_try_catch", pid 315, jiffies 4294894233 (age 639.920s) hex dump (first 32 bytes): 40 a1 8b 84 83 05 ff ff 68 a2 2f 83 83 05 ff ff @.......h./..... 22 00 00 00 01 00 00 00 00 00 00 00 00 80 ff ff "............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000ee41df9e>] vcap_rule_add_action+0x104/0x178 [<000000001cc1bb38>] test_vcap_xn_rule_creator.constprop.43+0xd8/0x328 [<00000000be638a45>] vcap_api_rule_remove_in_middle_test+0xc4/0xb80 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583848ba100 (size 64): comm "kunit_try_catch", pid 315, jiffies 4294894233 (age 639.920s) hex dump (first 32 bytes): 80 a1 8b 84 83 05 ff ff 58 a2 2f 83 83 05 ff ff ........X./..... 7d 00 00 00 01 00 00 00 02 00 00 00 ff 00 00 00 }............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<0000000043c78991>] vcap_rule_add_key+0x104/0x180 [<00000000ba73cfbe>] vcap_add_type_keyfield+0xfc/0x128 [<000000002b00f7df>] vcap_val_rule+0x274/0x3e8 [<00000000e67d2ff5>] test_vcap_xn_rule_creator.constprop.43+0xf0/0x328 [<00000000be638a45>] vcap_api_rule_remove_in_middle_test+0xc4/0xb80 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0583827d2180 (size 192): comm "kunit_try_catch", pid 317, jiffies 4294894238 (age 639.956s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 14 00 00 00 90 01 00 00 .'.............. 00 00 00 00 00 00 00 00 00 e1 06 83 83 05 ff ff ................ backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000648fefae>] vcap_alloc_rule+0x17c/0x26c [<000000004da16164>] test_vcap_xn_rule_creator.constprop.43+0xac/0x328 [<00000000e1ed8350>] vcap_api_rule_remove_in_front_test+0x144/0x6c0 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff05838306e0c0 (size 64): comm "kunit_try_catch", pid 317, jiffies 4294894238 (age 639.956s) hex dump (first 32 bytes): 40 e1 06 83 83 05 ff ff a8 21 7d 82 83 05 ff ff @........!}..... 22 00 00 00 01 00 00 00 00 00 00 00 00 80 ff ff "............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<00000000ee41df9e>] vcap_rule_add_action+0x104/0x178 [<000000001cc1bb38>] test_vcap_xn_rule_creator.constprop.43+0xd8/0x328 [<00000000e1ed8350>] vcap_api_rule_remove_in_front_test+0x144/0x6c0 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 unreferenced object 0xffff05838306e180 (size 64): comm "kunit_try_catch", pid 317, jiffies 4294894238 (age 639.968s) hex dump (first 32 bytes): 98 21 7d 82 83 05 ff ff 00 e1 06 83 83 05 ff ff .!}............. 67 00 00 00 00 00 00 00 01 01 00 00 ff 00 00 00 g............... backtrace: [<000000008585a8f7>] slab_post_alloc_hook+0xb8/0x368 [<00000000795eba12>] __kmem_cache_alloc_node+0x174/0x290 [<0000000061886991>] kmalloc_trace+0x40/0x164 [<0000000043c78991>] vcap_rule_add_key+0x104/0x180 [<000000006ce4945d>] test_add_def_fields+0x84/0x8c [<00000000507e0ab6>] vcap_val_rule+0x294/0x3e8 [<00000000e67d2ff5>] test_vcap_xn_rule_creator.constprop.43+0xf0/0x328 [<00000000e1ed8350>] vcap_api_rule_remove_in_front_test+0x144/0x6c0 [<00000000548b559e>] kunit_try_run_case+0x50/0xac [<00000000663f0105>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<00000000e646f120>] kthread+0x124/0x130 [<000000005257599e>] ret_from_fork+0x10/0x20 Fixes: dccc30cc4906 ("net: microchip: sparx5: Add KUNIT test of counters and sorted rules") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309090950.uOTEKQq3-lkp@intel.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15net: microchip: sparx5: Fix possible memory leak in vcap_api_encode_rule_test()Jinjie Ruan
Inject fault while probing kunit-example-test.ko, the duprule which is allocated in vcap_dup_rule() and the vcap enabled port which is allocated in vcap_enable() of vcap_enable_lookups in vcap_api_encode_rule_test() is not freed, and it cause the memory leaks below. Use vcap_enable_lookups() with false arg to free the vcap enabled port as other drivers do it. And use vcap_del_rule() to free the duprule. unreferenced object 0xffff677a0278bb00 (size 64): comm "kunit_try_catch", pid 388, jiffies 4294895987 (age 1101.840s) hex dump (first 32 bytes): 18 bd a5 82 00 80 ff ff 18 bd a5 82 00 80 ff ff ................ 40 fe c8 0e be c6 ff ff 00 00 00 00 00 00 00 00 @............... backtrace: [<000000007d53023a>] slab_post_alloc_hook+0xb8/0x368 [<0000000076e3f654>] __kmem_cache_alloc_node+0x174/0x290 [<0000000034d76721>] kmalloc_trace+0x40/0x164 [<00000000013380a5>] vcap_enable_lookups+0x1c8/0x70c [<00000000bbec496b>] vcap_api_encode_rule_test+0x2f8/0xb18 [<000000002c2bfb7b>] kunit_try_run_case+0x50/0xac [<00000000ff74642b>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<000000004af845ca>] kthread+0x124/0x130 [<0000000038a000ca>] ret_from_fork+0x10/0x20 unreferenced object 0xffff677a027803c0 (size 192): comm "kunit_try_catch", pid 388, jiffies 4294895988 (age 1101.836s) hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 d8 03 78 02 7a 67 ff ff ..........x.zg.. backtrace: [<000000007d53023a>] slab_post_alloc_hook+0xb8/0x368 [<0000000076e3f654>] __kmem_cache_alloc_node+0x174/0x290 [<0000000034d76721>] kmalloc_trace+0x40/0x164 [<00000000c1010131>] vcap_dup_rule+0x34/0x14c [<00000000d43c54a4>] vcap_add_rule+0x29c/0x32c [<0000000073f1c26d>] vcap_api_encode_rule_test+0x304/0xb18 [<000000002c2bfb7b>] kunit_try_run_case+0x50/0xac [<00000000ff74642b>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<000000004af845ca>] kthread+0x124/0x130 [<0000000038a000ca>] ret_from_fork+0x10/0x20 Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15net: microchip: sparx5: Fix memory leak for vcap_api_rule_add_actionvalue_test()Jinjie Ruan
Inject fault while probing kunit-example-test.ko, the field which is allocated by kzalloc in vcap_rule_add_action() of vcap_rule_add_action_bit/u32() is not freed, and it cause the memory leaks below. unreferenced object 0xffff0276c496b300 (size 64): comm "kunit_try_catch", pid 286, jiffies 4294894224 (age 920.072s) hex dump (first 32 bytes): 68 3c 62 82 00 80 ff ff 68 3c 62 82 00 80 ff ff h<b.....h<b..... 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <............... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<000000008b41c84d>] vcap_rule_add_action+0x104/0x178 [<00000000ae66c16c>] vcap_api_rule_add_actionvalue_test+0xa4/0x990 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c496b2c0 (size 64): comm "kunit_try_catch", pid 286, jiffies 4294894224 (age 920.072s) hex dump (first 32 bytes): 68 3c 62 82 00 80 ff ff 68 3c 62 82 00 80 ff ff h<b.....h<b..... 3c 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 <............... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<000000008b41c84d>] vcap_rule_add_action+0x104/0x178 [<00000000607782aa>] vcap_api_rule_add_actionvalue_test+0x100/0x990 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c496b280 (size 64): comm "kunit_try_catch", pid 286, jiffies 4294894224 (age 920.072s) hex dump (first 32 bytes): 68 3c 62 82 00 80 ff ff 68 3c 62 82 00 80 ff ff h<b.....h<b..... 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <............... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<000000008b41c84d>] vcap_rule_add_action+0x104/0x178 [<000000004e640602>] vcap_api_rule_add_actionvalue_test+0x15c/0x990 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c496b240 (size 64): comm "kunit_try_catch", pid 286, jiffies 4294894224 (age 920.092s) hex dump (first 32 bytes): 68 3c 62 82 00 80 ff ff 68 3c 62 82 00 80 ff ff h<b.....h<b..... 5a 00 00 00 01 00 00 00 32 54 76 98 00 00 00 00 Z.......2Tv..... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<000000008b41c84d>] vcap_rule_add_action+0x104/0x178 [<0000000011141bf8>] vcap_api_rule_add_actionvalue_test+0x1bc/0x990 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c496b200 (size 64): comm "kunit_try_catch", pid 286, jiffies 4294894224 (age 920.092s) hex dump (first 32 bytes): 68 3c 62 82 00 80 ff ff 68 3c 62 82 00 80 ff ff h<b.....h<b..... 28 00 00 00 01 00 00 00 dd cc bb aa 00 00 00 00 (............... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<000000008b41c84d>] vcap_rule_add_action+0x104/0x178 [<00000000d5ed3088>] vcap_api_rule_add_actionvalue_test+0x22c/0x990 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15net: microchip: sparx5: Fix memory leak for vcap_api_rule_add_keyvalue_test()Jinjie Ruan
Inject fault while probing kunit-example-test.ko, the field which is allocated by kzalloc in vcap_rule_add_key() of vcap_rule_add_key_bit/u32/u128() is not freed, and it cause the memory leaks below. unreferenced object 0xffff0276c14b7240 (size 64): comm "kunit_try_catch", pid 284, jiffies 4294894220 (age 920.072s) hex dump (first 32 bytes): 28 3c 61 82 00 80 ff ff 28 3c 61 82 00 80 ff ff (<a.....(<a..... 67 00 00 00 00 00 00 00 00 01 37 2b af ab ff ff g.........7+.... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<0000000059ad6bcd>] vcap_rule_add_key+0x104/0x180 [<00000000ff8002d3>] vcap_api_rule_add_keyvalue_test+0x100/0xba8 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c14b7280 (size 64): comm "kunit_try_catch", pid 284, jiffies 4294894221 (age 920.068s) hex dump (first 32 bytes): 28 3c 61 82 00 80 ff ff 28 3c 61 82 00 80 ff ff (<a.....(<a..... 67 00 00 00 00 00 00 00 01 01 37 2b af ab ff ff g.........7+.... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<0000000059ad6bcd>] vcap_rule_add_key+0x104/0x180 [<00000000f5ac9dc7>] vcap_api_rule_add_keyvalue_test+0x168/0xba8 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c14b72c0 (size 64): comm "kunit_try_catch", pid 284, jiffies 4294894221 (age 920.068s) hex dump (first 32 bytes): 28 3c 61 82 00 80 ff ff 28 3c 61 82 00 80 ff ff (<a.....(<a..... 67 00 00 00 00 00 00 00 00 00 37 2b af ab ff ff g.........7+.... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<0000000059ad6bcd>] vcap_rule_add_key+0x104/0x180 [<00000000c918ae7f>] vcap_api_rule_add_keyvalue_test+0x1d0/0xba8 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c14b7300 (size 64): comm "kunit_try_catch", pid 284, jiffies 4294894221 (age 920.084s) hex dump (first 32 bytes): 28 3c 61 82 00 80 ff ff 28 3c 61 82 00 80 ff ff (<a.....(<a..... 7d 00 00 00 01 00 00 00 32 54 76 98 ab ff 00 ff }.......2Tv..... backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<0000000059ad6bcd>] vcap_rule_add_key+0x104/0x180 [<0000000003352814>] vcap_api_rule_add_keyvalue_test+0x240/0xba8 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 unreferenced object 0xffff0276c14b7340 (size 64): comm "kunit_try_catch", pid 284, jiffies 4294894221 (age 920.084s) hex dump (first 32 bytes): 28 3c 61 82 00 80 ff ff 28 3c 61 82 00 80 ff ff (<a.....(<a..... 51 00 00 00 07 00 00 00 17 26 35 44 63 62 71 00 Q........&5Dcbq. backtrace: [<0000000028f08898>] slab_post_alloc_hook+0xb8/0x368 [<00000000514b9b37>] __kmem_cache_alloc_node+0x174/0x290 [<000000004620684a>] kmalloc_trace+0x40/0x164 [<0000000059ad6bcd>] vcap_rule_add_key+0x104/0x180 [<000000001516f109>] vcap_api_rule_add_keyvalue_test+0x2cc/0xba8 [<00000000fcc5326c>] kunit_try_run_case+0x50/0xac [<00000000f5f45b20>] kunit_generic_run_threadfn_adapter+0x20/0x2c [<0000000026284079>] kthread+0x124/0x130 [<0000000024d4a996>] ret_from_fork+0x10/0x20 Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPPSteve French
checkpatch flagged a few places with: WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP Also fixed minor typo Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-15ata: pata_parport: Fix code style issuesDamien Le Moal
Fix indentation and other code style issues in the comm.c file. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309150646.n3iBvbPj-lkp@intel.com/ Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-15ata: libahci: clear pending interrupt statusSzuying Chen
When a CRC error occurs, the HBA asserts an interrupt to indicate an interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then does error recovery. If the adapter receives another SDB FIS with an error (PxIS.TFES) from the device before the start of the EH recovery process, the interrupt signaling the new SDB cannot be serviced as PxIE was cleared already. This in turn results in the HBA inability to issue any command during the error recovery process after setting PxCMD.ST to 1 because PxIS.TFES is still set. According to AHCI 1.3.1 specifications section 6.2.2, fatal errors notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will cause the HBA to enter the ERR:Fatal state. In this state, the HBA shall not issue any new commands. To avoid this situation, introduce the function ahci_port_clear_pending_irq() to clear pending interrupts before executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2 specification. Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw> Fixes: e0bfd149973d ("[PATCH] ahci: stop engine during hard reset") Cc: stable@vger.kernel.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-15Merge tag 'drm-misc-fixes-2023-09-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * radeon: Uninterruptible fence waiting * tests: Fix use-after-free bug * vkms: Revert hrtimer fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230914122649.GA28252@linux-uq9g
2023-09-15Merge tag 'drm-intel-fixes-2023-09-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Only check eDP HPD when AUX CH is shared. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZQL+NqtIZH5F/Nxr@intel.com
2023-09-15Merge tag 'amd-drm-fixes-6.6-2023-09-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.6-2023-09-13: amdgpu: - GC 9.4.3 fixes - Fix white screen issues with S/G display on system with >= 64G of ram - Replay fixes - SMU 13.0.6 fixes - AUX backlight fix - NBIO 4.3 SR-IOV fixes for HDP - RAS fixes - DP MST resume fix - Fix segfault on systems with no vbios - DPIA fixes amdkfd: - CWSR grace period fix - Unaligned doorbell fix - CRIU fix for GFX11 - Add missing TLB flush on gfx10 and newer Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230913195009.7714-1-alexander.deucher@amd.com
2023-09-14bpf: Charge modmem for struct_ops trampolineSong Liu
Current code charges modmem for regular trampoline, but not for struct_ops trampoline. Add bpf_jit_[charge|uncharge]_modmem() to struct_ops so the trampoline is charged in both cases. Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230914222542.2986059-1-song@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-09-14Merge tag 'nvme-6.6-2023-09-14' of git://git.infradead.org/nvme into block-6.6Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.6 - nvme-tcp iov len fix (Varun) - nvme-hwmon const qualifier for safety (Krzysztof) - nvme-fc null pointer checks (Nigel) - nvme-pci no numa node fix (Pratyush) - nvme timeout fix for non-compliant controllers (Keith)" * tag 'nvme-6.6-2023-09-14' of git://git.infradead.org/nvme: nvme: avoid bogus CRTO values nvme-pci: do not set the NUMA node of device if it has none nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() nvme: host: hwmon: constify pointers to hwmon_channel_info nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
2023-09-14media: vb2: frame_vector.c: replace WARN_ONCE with a commentHans Verkuil
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO (e.g. if the start address was just a random value and uaccess fails with -EFAULT). There are no reports of WARN_ONCE being issued for actual VM_IO cases, so just drop it and instead add a note to the comment before the function. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: David Hildenbrand <david@redhat.com> Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
2023-09-14media: uvcvideo: Fix OOB readRicardo Ribalda
If the index provided by the user is bigger than the mask size, we might do an out of bound read. CC: stable@kernel.org Fixes: 40140eda661e ("media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU") Reported-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: bt8xx: bttv_risc_packed(): remove field checksHans Verkuil
Do not turn on the vcr_hack based on the btv->field value. This was a change in the bttv vb2 conversion that caused green lines at the bottom of the picture in tvtime. It was originally added to the vb2 conversion based on faulty information that without this there would be glitches in the video. However, later tests suggest that this is a problem in the utilities used to test this since tvtime behaves fine. This patch reverts the bttv driver to the original pre-vb2 behavior w.r.t. vcr_hack. Fixes: b7ec3212a73a ("media: bttv: convert to vb2") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() callChristophe JAILLET
The commit in Fixes has removed an fwnode_handle_put() call in the error handling path of the probe. Remove the same call from the remove function. Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: i2c: imx219: Perform a full mode set unconditionallyLaurent Pinchart
The .set_fmt() handler tries to avoid updating the sensor configuration when the mode hasn't changed. It does so by comparing both the mode and the media bus code. While the latter correctly uses the media bus code stored in the subdev state, the former compares the mode being set with the active mode, regardless of whether .set_fmt() is called for the ACTIVE or TRY format. This can lead to .set_fmt() returning early when operating on TRY formats. This could be fixed by replacing the mode comparison with width and height comparisons, using the frame size stored in the subdev state. However, the optimization that avoids updates to the sensor configuration is not very useful, and is not commonly found in sensor drivers. To improve consistency across sensor drivers, it is better, in addition to being easier, to simply drop it. Do so. Fixes: e8a5b1df000e ("media: i2c: imx219: Use subdev active state") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: i2c: imx219: Fix crop rectangle setting when changing formatLaurent Pinchart
When moving the imx219 driver to the subdev active state, commit e8a5b1df000e ("media: i2c: imx219: Use subdev active state") used the pad crop rectangle stored in the subdev state to report the crop rectangle of the active mode. That crop rectangle was however not set in the state when setting the format, which resulted in reporting an incorrect crop rectangle to userspace. Fix it. Fixes: e8a5b1df000e ("media: i2c: imx219: Use subdev active state") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: i2c: imx219: Fix a typo referring to a wrong variableLaurent Pinchart
The imx219_init_cfg() function has stopped operating on the try format since commit 7e700847b1fe ("media: i2c: imx219: Switch from open to init_cfg"), but a comment in the function wasn't updated. Fix it. While at it, improve spelling in a second comment in the function. Fixes: 7e700847b1fe ("media: i2c: imx219: Switch from open to init_cfg") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: i2c: max9286: Remove an incorrect fwnode_handle_put() callChristophe JAILLET
The commit in Fixes has removed an fwnode_handle_put() call in the error handling path of max9286_v4l2_register(). Remove the same call from max9286_v4l2_unregister(). Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: ivsc: Depend on VIDEO_DEVSakari Ailus
CONFIG_VIDEO_DEV is required by other selected symbols. Depend on it. Link: https://lore.kernel.org/linux-media/20230828085718.3912335-1-sakari.ailus@linux.intel.com Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14btrfs: fix race between reading a directory and adding entries to itFilipe Manana
When opening a directory (opendir(3)) or rewinding it (rewinddir(3)), we are not holding the directory's inode locked, and this can result in later attempting to add two entries to the directory with the same index number, resulting in a transaction abort, with -EEXIST (-17), when inserting the second delayed dir index. This results in a trace like the following: Sep 11 22:34:59 myhostname kernel: BTRFS error (device dm-3): err add delayed dir index item(name: cockroach-stderr.log) into the insertion tree of the delayed node(root id: 5, inode id: 4539217, errno: -17) Sep 11 22:34:59 myhostname kernel: ------------[ cut here ]------------ Sep 11 22:34:59 myhostname kernel: kernel BUG at fs/btrfs/delayed-inode.c:1504! Sep 11 22:34:59 myhostname kernel: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI Sep 11 22:34:59 myhostname kernel: CPU: 0 PID: 7159 Comm: cockroach Not tainted 6.4.15-200.fc38.x86_64 #1 Sep 11 22:34:59 myhostname kernel: Hardware name: ASUS ESC500 G3/P9D WS, BIOS 2402 06/27/2018 Sep 11 22:34:59 myhostname kernel: RIP: 0010:btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: Code: eb dd 48 (...) Sep 11 22:34:59 myhostname kernel: RSP: 0000:ffffa9980e0fbb28 EFLAGS: 00010282 Sep 11 22:34:59 myhostname kernel: RAX: 0000000000000000 RBX: ffff8b10b8f4a3c0 RCX: 0000000000000000 Sep 11 22:34:59 myhostname kernel: RDX: 0000000000000000 RSI: ffff8b177ec21540 RDI: ffff8b177ec21540 Sep 11 22:34:59 myhostname kernel: RBP: ffff8b110cf80888 R08: 0000000000000000 R09: ffffa9980e0fb938 Sep 11 22:34:59 myhostname kernel: R10: 0000000000000003 R11: ffffffff86146508 R12: 0000000000000014 Sep 11 22:34:59 myhostname kernel: R13: ffff8b1131ae5b40 R14: ffff8b10b8f4a418 R15: 00000000ffffffef Sep 11 22:34:59 myhostname kernel: FS: 00007fb14a7fe6c0(0000) GS:ffff8b177ec00000(0000) knlGS:0000000000000000 Sep 11 22:34:59 myhostname kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Sep 11 22:34:59 myhostname kernel: CR2: 000000c00143d000 CR3: 00000001b3b4e002 CR4: 00000000001706f0 Sep 11 22:34:59 myhostname kernel: Call Trace: Sep 11 22:34:59 myhostname kernel: <TASK> Sep 11 22:34:59 myhostname kernel: ? die+0x36/0x90 Sep 11 22:34:59 myhostname kernel: ? do_trap+0xda/0x100 Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: ? do_error_trap+0x6a/0x90 Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: ? exc_invalid_op+0x50/0x70 Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: ? asm_exc_invalid_op+0x1a/0x20 Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260 Sep 11 22:34:59 myhostname kernel: btrfs_insert_dir_item+0x200/0x280 Sep 11 22:34:59 myhostname kernel: btrfs_add_link+0xab/0x4f0 Sep 11 22:34:59 myhostname kernel: ? ktime_get_real_ts64+0x47/0xe0 Sep 11 22:34:59 myhostname kernel: btrfs_create_new_inode+0x7cd/0xa80 Sep 11 22:34:59 myhostname kernel: btrfs_symlink+0x190/0x4d0 Sep 11 22:34:59 myhostname kernel: ? schedule+0x5e/0xd0 Sep 11 22:34:59 myhostname kernel: ? __d_lookup+0x7e/0xc0 Sep 11 22:34:59 myhostname kernel: vfs_symlink+0x148/0x1e0 Sep 11 22:34:59 myhostname kernel: do_symlinkat+0x130/0x140 Sep 11 22:34:59 myhostname kernel: __x64_sys_symlinkat+0x3d/0x50 Sep 11 22:34:59 myhostname kernel: do_syscall_64+0x5d/0x90 Sep 11 22:34:59 myhostname kernel: ? syscall_exit_to_user_mode+0x2b/0x40 Sep 11 22:34:59 myhostname kernel: ? do_syscall_64+0x6c/0x90 Sep 11 22:34:59 myhostname kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc The race leading to the problem happens like this: 1) Directory inode X is loaded into memory, its ->index_cnt field is initialized to (u64)-1 (at btrfs_alloc_inode()); 2) Task A is adding a new file to directory X, holding its vfs inode lock, and calls btrfs_set_inode_index() to get an index number for the entry. Because the inode's index_cnt field is set to (u64)-1 it calls btrfs_inode_delayed_dir_index_count() which fails because no dir index entries were added yet to the delayed inode and then it calls btrfs_set_inode_index_count(). This functions finds the last dir index key and then sets index_cnt to that index value + 1. It found that the last index key has an offset of 100. However before it assigns a value of 101 to index_cnt... 3) Task B calls opendir(3), ending up at btrfs_opendir(), where the VFS lock for inode X is not taken, so it calls btrfs_get_dir_last_index() and sees index_cnt still with a value of (u64)-1. Because of that it calls btrfs_inode_delayed_dir_index_count() which fails since no dir index entries were added to the delayed inode yet, and then it also calls btrfs_set_inode_index_count(). This also finds that the last index key has an offset of 100, and before it assigns the value 101 to the index_cnt field of inode X... 4) Task A assigns a value of 101 to index_cnt. And then the code flow goes to btrfs_set_inode_index() where it increments index_cnt from 101 to 102. Task A then creates a delayed dir index entry with a sequence number of 101 and adds it to the delayed inode; 5) Task B assigns 101 to the index_cnt field of inode X; 6) At some later point when someone tries to add a new entry to the directory, btrfs_set_inode_index() will return 101 again and shortly after an attempt to add another delayed dir index key with index number 101 will fail with -EEXIST resulting in a transaction abort. Fix this by locking the inode at btrfs_get_dir_last_index(), which is only only used when opening a directory or attempting to lseek on it. Reported-by: ken <ken@bllue.org> Link: https://lore.kernel.org/linux-btrfs/CAE6xmH+Lp=Q=E61bU+v9eWX8gYfLvu6jLYxjxjFpo3zHVPR0EQ@mail.gmail.com/ Reported-by: syzbot+d13490c82ad5353c779d@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/ Fixes: 9b378f6ad48c ("btrfs: fix infinite directory reads") CC: stable@vger.kernel.org # 6.5+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-14btrfs: refresh dir last index during a rewinddir(3) callFilipe Manana
When opening a directory we find what's the index of its last entry and then store it in the directory's file handle private data (struct btrfs_file_private::last_index), so that in the case new directory entries are added to a directory after an opendir(3) call we don't end up in an infinite loop (see commit 9b378f6ad48c ("btrfs: fix infinite directory reads")) when calling readdir(3). However once rewinddir(3) is called, POSIX states [1] that any new directory entries added after the previous opendir(3) call, must be returned by subsequent calls to readdir(3): "The rewinddir() function shall reset the position of the directory stream to which dirp refers to the beginning of the directory. It shall also cause the directory stream to refer to the current state of the corresponding directory, as a call to opendir() would have done." We currently don't refresh the last_index field of the struct btrfs_file_private associated to the directory, so after a rewinddir(3) we are not returning any new entries added after the opendir(3) call. Fix this by finding the current last index of the directory when llseek is called against the directory. This can be reproduced by the following C program provided by Ian Johnson: #include <dirent.h> #include <stdio.h> int main(void) { DIR *dir = opendir("test"); FILE *file; file = fopen("test/1", "w"); fwrite("1", 1, 1, file); fclose(file); file = fopen("test/2", "w"); fwrite("2", 1, 1, file); fclose(file); rewinddir(dir); struct dirent *entry; while ((entry = readdir(dir))) { printf("%s\n", entry->d_name); } closedir(dir); return 0; } Reported-by: Ian Johnson <ian@ianjohnson.dev> Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/ Fixes: 9b378f6ad48c ("btrfs: fix infinite directory reads") CC: stable@vger.kernel.org # 6.5+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-14btrfs: set last dir index to the current last index when opening dirFilipe Manana
When opening a directory for reading it, we set the last index where we stop iteration to the value in struct btrfs_inode::index_cnt. That value does not match the index of the most recently added directory entry but it's instead the index number that will be assigned the next directory entry. This means that if after the call to opendir(3) new directory entries are added, a readdir(3) call will return the first new directory entry. This is fine because POSIX says the following [1]: "If a file is removed from or added to the directory after the most recent call to opendir() or rewinddir(), whether a subsequent call to readdir() returns an entry for that file is unspecified." For example for the test script from commit 9b378f6ad48c ("btrfs: fix infinite directory reads"), where we have 2000 files in a directory, ext4 doesn't return any new directory entry after opendir(3), while xfs returns the first 13 new directory entries added after the opendir(3) call. If we move to a shorter example with an empty directory when opendir(3) is called, and 2 files added to the directory after the opendir(3) call, then readdir(3) on btrfs will return the first file, ext4 and xfs return the 2 files (but in a different order). A test program for this, reported by Ian Johnson, is the following: #include <dirent.h> #include <stdio.h> int main(void) { DIR *dir = opendir("test"); FILE *file; file = fopen("test/1", "w"); fwrite("1", 1, 1, file); fclose(file); file = fopen("test/2", "w"); fwrite("2", 1, 1, file); fclose(file); struct dirent *entry; while ((entry = readdir(dir))) { printf("%s\n", entry->d_name); } closedir(dir); return 0; } To make this less odd, change the behaviour to never return new entries that were added after the opendir(3) call. This is done by setting the last_index field of the struct btrfs_file_private attached to the directory's file handle with a value matching btrfs_inode::index_cnt minus 1, since that value always matches the index of the next new directory entry and not the index of the most recently added entry. [1] https://pubs.opengroup.org/onlinepubs/007904875/functions/readdir_r.html Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/ CC: stable@vger.kernel.org # 6.5+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-09-14nvme: avoid bogus CRTO valuesKeith Busch
Some devices are reporting controller ready mode support, but return 0 for CRTO. These devices require a much higher time to ready than that, so they are failing to initialize after the driver starter preferring that value over CAP.TO. The spec requires that CAP.TO match the appropritate CRTO value, or be set to 0xff if CRTO is larger than that. This means that CAP.TO can be used to validate if CRTO is reliable, and provides an appropriate fallback for setting the timeout value if not. Use whichever is larger. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863 Reported-by: Cláudio Sampaio <patola@gmail.com> Reported-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Felix Yan <felixonmars@archlinux.org> Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-09-14thermal: core: Fix disabled trip point check in handle_thermal_trip()Rafael J. Wysocki
Commit bc840ea5f9a9 ("thermal: core: Do not handle trip points with invalid temperature") added a check for invalid temperature to the disabled trip point check in handle_thermal_trip(), but that check was added at a point when the trip structure has not been initialized yet. This may cause handle_thermal_trip() to skip a valid trip point in some cases, so fix it by moving the check to a suitable place, after __thermal_zone_get_trip() has been called to populate the trip structure. Fixes: bc840ea5f9a9 ("thermal: core: Do not handle trip points with invalid temperature") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-14Merge tag 'md-fixes-20230914' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.6 Pull MD fixes from Song: "These commits fix a bugzilla report [1] and some recent issues in 6.5 and 6.6. [1] https://bugzilla.kernel.org/show_bug.cgi?id=217798" * tag 'md-fixes-20230914' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Put the right device in md_seq_next md/raid1: fix error: ISO C90 forbids mixed declarations md: fix warning for holder mismatch from export_rdev() md: don't dereference mddev after export_rdev()
2023-09-14selftests/bpf: Skip module_fentry_shadow test when bpf_testmod is not availableArtem Savkov
This test relies on bpf_testmod, so skip it if the module is not available. Fixes: aa3d65de4b900 ("bpf/selftests: Test fentry attachment to shadowed functions") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
2023-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-15kbuild: avoid long argument lists in make modules_installMichal Kubecek
Running "make modules_install" may fail with make[2]: execvp: /bin/sh: Argument list too long if many modules are built and INSTALL_MOD_PATH is long. This is because scripts/Makefile.modinst creates all directories with one mkdir command. Use $(foreach ...) instead to prevent an excessive argument list. Fixes: 2dfec887c0fd ("kbuild: reduce the number of mkdir calls during modules_install") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-15kbuild: fix kernel-devel RPM package and linux-headers Deb packageMasahiro Yamada
Since commit fe66b5d2ae72 ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package"), the kernel-devel RPM package and linux-headers Deb package are broken. I double-quoted the $(find ... -type d), which resulted in newlines being included in the argument to the outer find comment. find: 'arch/arm64/include\narch/arm64/kvm/hyp/include': No such file or directory The outer find command is unneeded. Fixes: fe66b5d2ae72 ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package") Reported-by: Karolis M <k4rolis@protonmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-09-14md: Put the right device in md_seq_nextMariusz Tkaczyk
If there are multiple arrays in system and one mddevice is marked with MD_DELETED and md_seq_next() is called in the middle of removal then it _get()s proper device but it may _put() deleted one. As a result, active counter may never be zeroed for mddevice and it cannot be removed. Put the device which has been _get with previous md_seq_next() call. Cc: stable@vger.kernel.org Fixes: 12a6caf27324 ("md: only delete entries from all_mddevs when the disk is freed") Reported-by: AceLan Kao <acelan@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217798 Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230914152416.10819-1-mariusz.tkaczyk@linux.intel.com
2023-09-14Merge tag 'net-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite unusually, this does not contains any fix coming from subtrees (nf, ebpf, wifi, etc). Current release - regressions: - bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active() Previous releases - regressions: - ipv4: fix one memleak in __inet_del_ifa() - tcp: fix bind() regressions for v4-mapped-v6 addresses. - tls: do not free tls_rec on async operation in bpf_exec_tx_verdict() - dsa: fixes for SJA1105 FDB regressions - veth: update XDP feature set when bringing up device - igb: fix hangup when enabling SR-IOV Previous releases - always broken: - kcm: fix memory leak in error path of kcm_sendmsg() - smc: fix data corruption in smcr_port_add - microchip: fix possible memory leak for vcap_dup_rule()" * tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). net: renesas: rswitch: Add spin lock protection for irq {un}mask net: renesas: rswitch: Fix unmasking irq condition igb: clean up in all error paths when enabling SR-IOV ixgbe: fix timestamp configuration code selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c. selftest: tcp: Move expected_errno into each test case in bind_wildcard.c. selftest: tcp: Fix address length in bind_wildcard.c. tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address. tcp: Fix bind() regression for v4-mapped-v6 wildcard address. tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any). ipv6: fix ip6_sock_set_addr_preferences() typo veth: Update XDP feature set when bringing up device net: macb: fix sleep inside spinlock net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict() net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988 net: ethernet: mtk_eth_soc: fix uninitialized variable kcm: Fix memory leak in error path of kcm_sendmsg() r8152: check budget for r8152_poll() net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset ...
2023-09-14Merge branch 'seltests-xsk-various-improvements-to-xskxceiver'Alexei Starovoitov
Magnus Karlsson says: ==================== seltests/xsk: various improvements to xskxceiver This patch set implements several improvements to the xsk selftests test suite that I thought were useful while debugging the xsk multi-buffer code and tests. The largest new feature is the ability to be able to execute a single test instead of the whole test suite. This required some surgery on the current code, details below. Anatomy of the path set: 1: Print useful info on a per packet basis with the option -v 2: Add a timeout in the transmission loop too. We only used to have one for the Rx thread, but Tx can lock up too waiting for completions. 3: Add an option (-m) to only run the tests (or a single test with a later patch) in a single mode: skb, drv, or zc (zero-copy). 4-5: Preparatory patches to be able to specify a test to run. Need to define the test names in a single structure and their entry points, so we can use this when wanting to run a specific test. 6: Adds a command line option (-l) that lists all the tests. 7: Adds a command line option (-t) that runs a specific test instead of the whole test suite. Can be combined with -m to specify a single mode too. 8: Use ksft_print_msg() uniformly throughout the tests. It was a mix of printf() and ksft_print_msg() before. 9: In some places, we failed the whole test suite instead of a single test in certain circumstances. Fix this so only the test in question is failed and the rest of the test suite continues. 10: Display the available command line options with -h v3 -> v4: * Fixed another spelling error in patch #9 [Maciej] * Only allow the actual strings for the -m command [Maciej] * Move some code from patch #7 to #3 [Maciej] v2 -> v3: * Drop the support for environment variables. Probably not useful. [Maciej] * Fixed spelling mistake in patch #9 [Maciej] * Fail gracefully if unsupported mode is chosen [Maciej] * Simplified test run loop [Maciej] v1 -> v2: * Introduce XSKTEST_MODE env variable to be able to set the mode to use [Przemyslaw] * Introduce XSKTEST_ETH env variable to be able to set the ethernet interface to use by introducing a new patch (#11) [Magnus] * Fixed spelling error in patch #5 [Przemyslaw, Maciej] * Fixed confusing documentation in patch #10 [Przemyslaw] * The -l option can now be used without being root [Magnus, Maciej] * Fixed documentation error in patch #7 [Maciej] * Added error handling to the -t option [Maciej] * -h now displayed as an option [Maciej] Thanks: Magnus ==================== Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-1-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: display command line options with -hMagnus Karlsson
Add the -h option to display all available command line options available for test_xsk.sh and xskxceiver. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: fail single test instead of all testsMagnus Karlsson
In a number of places at en error, exit_with_error() is called that terminates the whole test suite. This is not always desirable as it would be more logical to only fail that test and then go along with the other ones. So change this in a number of places in which I thought it would be more logical to just fail the test in question. Examples of this are in code that is only used by a single test. Also delete a pointless if-statement in receive_pkts() that has an exit_with_error() in it. It can never occur since the return value is an unsigned and the test is for less than zero. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: use ksft_print_msg uniformlyMagnus Karlsson
Use ksft_print_msg() instead of printf() and fprintf() in all places as the ksefltests framework is being used. There is only one exception and that is for the list-of-tests print out option, since no tests are run in that case. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: add option to run single testMagnus Karlsson
Add a command line option to be able to run a single test. This option (-t) takes a number from the list of tests available with the "-l" option. Here are two examples: Run test number 2, the "receive single packet" test in all available modes: ./test_xsk.sh -t 2 Run test number 21, the metadata copy test in skb mode only ./test_xsh.sh -t 21 -m skb Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: add option that lists all testsMagnus Karlsson
Add a command line option (-l) that lists all the tests. The number before the test will be used in the next commit for specifying a single test to run. Here is an example of the output: Tests: 0: SEND_RECEIVE 1: SEND_RECEIVE_2K_FRAME 2: SEND_RECEIVE_SINGLE_PKT 3: POLL_RX 4: POLL_TX 5: POLL_RXQ_FULL 6: POLL_TXQ_FULL 7: SEND_RECEIVE_UNALIGNED : : Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: declare test names in structMagnus Karlsson
Declare the test names statically in a struct so that we can refer to them when adding the support to execute a single test in the next commit. Before this patch, the names of them were not declared in a single place which made it not possible to refer to them. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-14selftests/xsk: move all tests to separate functionsMagnus Karlsson
Prepare for the capability to be able to run a single test by moving all the tests to their own functions. This function can then be called to execute that test in the next commit. Also, the tests named RUN_TO_COMPLETION_* were not named well, so change them to SEND_RECEIVE_* as it is just a basic send and receive test of 4K packets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 23:34:18 +0000