| Age | Commit message (Collapse) | Author |
|---|
|
Testing uncovered that even when the taprio gate is closed, some packets
still transmit.
According to i225/6 hardware errata [1], traffic might overflow the
planned QBV window. This happens because MAC maintains an internal buffer,
primarily for supporting half duplex retries. Therefore, even when the
gate closes, residual MAC data in the buffer may still transmit.
To mitigate this for i226, reduce the MAC's internal buffer from 192 bytes
to the recommended 88 bytes by modifying the RETX_CTL register value.
This follows guidelines from:
[1] Ethernet Controller I225/I22 Spec Update Rev 2.1 Errata Item 9:
TSN: Packet Transmission Might Cross Qbv Window
[2] I225/6 SW User Manual Rev 1.2.4: Section 8.11.5 Retry Buffer Control
Note that the RETX_CTL register can't be used in TSN mode because half
duplex feature cannot coexist with TSN.
Test Steps:
1. Send taprio cmd to board A:
tc qdisc replace dev enp1s0 parent root handle 100 taprio \
num_tc 4 \
map 3 2 1 0 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 0 \
sched-entry S 0x07 500000 \
sched-entry S 0x0f 500000 \
flags 0x2 \
txtime-delay 0
Note that for TC3, gate should open for 500us and close for another
500us.
3. Take tcpdump log on Board B.
4. Send udp packets via UDP tai app from Board A to Board B.
5. Analyze tcpdump log via wireshark log on Board B. Ensure that the
total time from the first to the last packet received during one cycle
for TC3 does not exceed 500us.
Fixes: 43546211738e ("igc: Add new device ID's")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When avc_add_xperms_decision() fails, the information recorded by the new
avc node is incomplete. In this case, the new avc node should be released
instead of replacing the old avc node.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls")
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The ID register for S1PIE is ID_AA64MMFR3_EL1.S1PIE which is bits 11:8 but
get-reg-list uses a shift of 4, checking SCTLRX instead. Use a shift of 8
instead.
Fixes: 5f0419a0083b ("KVM: selftests: get-reg-list: add Permission Indirection registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240731-kvm-arm64-fix-s1pie-test-v1-1-a9253f3b7db4@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Tidy up some of the PAuth trapping code to clear up some comments
and avoid clang/checkpatch warnings. Also, don't bother setting
PAuth HCR_EL2 bits in pKVM, since it's handled by the hypervisor.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240722163311.1493879-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In case the guest doesn't have any LPI, we previously relied on the
iterator setting
'intid = nr_spis + VGIC_NR_PRIVATE_IRQS' && 'lpi_idx = 1'
to exit the iterator. But it was broken with commit 85d3ccc8b75b ("KVM:
arm64: vgic-debug: Use an xarray mark for debug iterator") -- the intid
remains at 'nr_spis + VGIC_NR_PRIVATE_IRQS - 1', and we end up endlessly
printing the last SPI's state.
Consider that it's meaningless to search the LPI xarray and populate
lpi_idx when there is no LPI, let's just skip the process for that case.
The result is that
* If there's no LPI, we focus on the intid and exit the iterator when it
runs out of the valid SPI range.
* Otherwise we keep the current logic and let the xarray drive the
iterator.
Fixes: 85d3ccc8b75b ("KVM: arm64: vgic-debug: Use an xarray mark for debug iterator")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240807052024.2084-1-yuzenghui@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
With the NV support of TLBI-range operations, KVM makes use of
instructions that are only supported by binutils versions >= 2.30.
This breaks the build for very old toolchains.
Make KVM support conditional on having ARMv8.4 support in the
assembler, side-stepping the issue.
Fixes: 5d476ca57d7d ("KVM: arm64: nv: Add handling of range-based TLBI operations")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240807115144.3237260-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.
The kernel uses a static key to switch between the two modes.
In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).
A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.
Bisect points to commit ce0a1b608bfc ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.
Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.
This results in the following decision matrix:
X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N
virt_spin_lock_key N Y/N Y N
Fixes: ce0a1b608bfc ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com
|
|
On a platform using the "Multiprocessor Wakeup Structure"[1] to startup
secondary CPUs the control processor needs to memremap() the physical
address of the MP Wakeup Structure mailbox to the variable
acpi_mp_wake_mailbox, which holds the virtual address of mailbox.
To wake up the AP the control processor writes the APIC ID of AP, the
wakeup vector and the ACPI_MP_WAKE_COMMAND_WAKEUP command into the mailbox.
Current implementation doesn't consider the case which restricts boot time
CPU bringup to 1 with the kernel parameter "maxcpus=1" and brings other
CPUs online later from user space as it sets acpi_mp_wake_mailbox to
read-only after init. So when the first AP is tried to brought online
after init, the attempt to update the variable results in a kernel panic.
The memremap() call that initializes the variable cannot be moved into
acpi_parse_mp_wake() because memremap() is not functional at that point in
the boot process. Also as the APs might never be brought up, keep the
memremap() call in acpi_wakeup_cpu() so that the operation only takes place
when needed.
Fixes: 24dd05da8c79 ("x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init")
Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20240805103531.1230635-1-zhiquan1.li@intel.com
|
|
To pick up changes from:
9ef54a384526 arm64: cputype: Add Cortex-A725 definitions
58d245e03c32 arm64: cputype: Add Cortex-X1C definitions
fd2ff5f0b320 arm64: cputype: Add Cortex-X925 definitions
add332c40328 arm64: cputype: Add Cortex-A720 definitions
be5a6f238700 arm64: cputype: Add Cortex-X3 definitions
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up changes from:
149fd4712bcd perf/x86/intel: Support Perfmon MSRs aliasing
21b362cc762a x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
4f460bff7b6a cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
7ea81936b853 x86/cpufeatures: Add HWP highest perf change feature flag
78ce84b9e0a5 x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
1beb348d5c7f x86/sev: Provide SVSM discovery support
This should be used to beautify x86 syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up changes from:
0f9ca80fa4f9 fs: Add initial atomic write support info to statx
f9af549d1fd3 fs: export mount options via statmount()
0a3deb11858a fs: Allow listmount() in foreign mount namespace
09b31295f833 fs: export the mount ns id via statmount
d04bccd8c19d listmount: allow listing in reverse order
bfc69fd05ef9 fs/procfs: add build ID fetching to PROCMAP_QUERY API
ed5d583a88a9 fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps
This should be used to beautify FS syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
diff -u tools/perf/trace/beauty/include/uapi/linux/mount.h include/uapi/linux/mount.h
diff -u tools/perf/trace/beauty/include/uapi/linux/stat.h include/uapi/linux/stat.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up changes from:
d25a92ccae6b net/smc: Introduce IPPROTO_SMC
060f4ba6e403 io_uring/net: move charging socket out of zc io_uring
bb6aaf736680 net: Split a __sys_listen helper for io_uring
dc2e77979412 net: Split a __sys_bind helper for io_uring
This should be used to beautify socket syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
And arch syscall tables to pick up changes from:
b1e31c134a8a powerpc: restore some missing spu syscalls
d3882564a77c syscalls: fix compat_sys_io_pgetevents_time64 usage
54233a425403 uretprobe: change syscall number, again
63ded110979b uprobe: Change uretprobe syscall scope and number
9142be9e6443 x86/syscall: Mark exit[_group] syscall handlers __noreturn
9aae1baa1c5d x86, arm: Add missing license tag to syscall tables files
5c28424e9a34 syscalls: Fix to add sys_uretprobe to syscall.tbl
190fec72df4a uprobe: Wire up uretprobe system call
This should be used to beautify syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit ac21add2540e ("ice: Implement driver functionality to dump fec
statistics") introduces obtaining FEC correctable and uncorrectable
stats per netdev in ICE driver. Unfortunately the assignment of values
to fec_stats structure has been done incorrectly. This commit fixes the
assignments.
Fixes: ac21add2540e ("ice: Implement driver functionality to dump fec statistics")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Block HW write access for the driver while the device is in reset to
avoid potential race condition and access to the PTP HW in
non-nominal state which could lead to undesired effects
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Synchronize OICR IRQ when preparing for reset to avoid potential
race conditions between the reset procedure and OICR
Fixes: 4aad5335969f ("ice: add individual interrupt allocation")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
_rtl92du_init_queue_reserved_page
GCC complains:
In file included from include/linux/ieee80211.h:21,
from include/net/mac80211.h:20,
from drivers/net/wireless/realtek/rtlwifi/rtl8192du/../wifi.h:14,
from drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:4:
In function 'u32p_replace_bits',
inlined from '_rtl92du_init_queue_reserved_page.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c:225:2:
>> include/linux/bitfield.h:189:18: warning: 'value32' is used uninitialized [-Wuninitialized]
Part of the variable is indeed left uninitialised.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408062100.DWhN0CYH-lkp@intel.com/
Fixes: e769c67105d3 ("wifi: rtlwifi: Add rtl8192du/hw.{c,h}")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/2a808244-93d0-492c-b304-ae1974df5df9@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix double inode unlock for direct IO sync writes (reported by
syzbot)
- fix root tree id/name map definitions, don't use fixed size buffers
for name (reported by -Werror=unterminated-string-initialization)
- fix qgroup reserve leaks in bufferd write path
- update scrub status structure more often so it can be reported in
user space more accurately and let 'resume' not repeat work
- in preparation to remove space cache v1 in the future print a warning
if it's detected
* tag 'for-6.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid using fixed char array size for tree names
btrfs: fix double inode unlock for direct IO sync writes
btrfs: emit a warning about space cache v1 being deprecated
btrfs: fix qgroup reserve leaks in cow_file_range
btrfs: implement launder_folio for clearing dirty page reserve
btrfs: scrub: update last_physical after scrubbing one stripe
btrfs: factor out stripe length calculation into a helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"rt5033:
- fix driver regression causing kernel oops
axp288-charger:
- fix charge voltage setup
qcom-battmgr:
- fix thermal zone spamming errors
- fix init on Qualcomm X Elite"
* tag 'for-v6.11-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_battmgr: Ignore extra __le32 in info payload
power: supply: qcom_battmgr: return EAGAIN when firmware service is not up
power: supply: axp288_charger: Round constant_charge_voltage writes down
power: supply: axp288_charger: Fix constant_charge_voltage writes
power: supply: rt5033: Bring back i2c_set_clientdata
|
|
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
|
|
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes
Devicetree fixes for TI K3 platforms for v6.11
Critical fixes for the following:
* j784s4: Fix for McASP DMA map
* J722s/AM62p: GPIO ranges fixes
* k3-am62-verdin-dahlia: sleep-moci fixes for deep-sleep (revert)
* tag 'ti-k3-dt-fixes-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
|
|
Commit f1d6588af93b tried to convert GPIO lookup tables to software
properties for the vbus gpio device, bit forgot the most important
step: actually attaching the new properties to the device.
Also fix up the name of the property array to reflect the board name,
and add missing gpio/property.h and devices.h includes absence of which
causes compile failures on some configurations.
Switch "#ifdef CONFIG_USB_PXA25X" to "#if IS_ENABLED(CONFIG_USB_PXA25X)"
because it should not matter if the driver is buolt in or a module, it
still need vbus controls.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f1d6588af93b ("ARM: pxa/gumstix: convert vbus gpio to use software nodes")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use double backticks instead of quotes for sysfs attribute value.
This makes sphinx generate the "mcu" and "cpu" values in monospace when
rendering to HTML.
Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240730144924.25552-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix sphinx-build warnings
ERROR: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent
in Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20240702174938.04c12aab@canb.auug.org.au/
Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240730144924.25552-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the GPIO part of the driver optional, under a boolean config
option. Move the dependency to GPIOLIB and OF and the selection of
GPIOLIB_IRQCHIP to this new option.
This makes the turris-omnia-mcu driver available for compilation even if
GPIOLIB or OF are disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the system poweroff and RTC wakeup part of the driver optional,
under a boolean config option. Move the dependency to RTC_CLASS to this
new option.
This makes the turris-omnia-mcu driver available for compilation even if
RTC_CLASS is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the TRNG part of the driver optional, under a boolean config
option.
This makes the driver turris-omnia-mcu available for compilation even if
HW_RANDOM is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the watchdog part of the driver optional, under a boolean config
option. Move the dependency to WATCHDOG to this new option, and change
the WATCHDOG_CORE dependency to selection, as is done in most watchdog
drivers.
This makes the turris-omnia-mcu driver available for compilation even if
WATCHDOG is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This fixes a device removal deadlock when using erasure coding.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
chasing down a device removal deadlock with erasure coding
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We've had bugs in the past with incorrect integer conversions in disk
accounting code, which is why bucket helpers now always return s64s; add
a comment explaining this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
implicit integer conversion is a fertile source of bugs, and we really
would rather not have the min()/max() macros doing it implicitly.
bcachefs appears to be the only place in the kernel where this happens,
so let's fix it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We won't find a contended lock if it's not being tracked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
quot_frac is unused in serial8250_do_set_divisor() since commit
b2b4b8ed3c06 (serial: 8250_exar: Move custom divisor support out from
8250_port). So no point to pass it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240805102046.307511-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Coverity reports (as CID 1536978) that uart_poll_init() passes
uninitialized pm_state to uart_change_pm(). It is in case the first 'if'
takes the true branch (does "goto out;").
Fix this and simplify the function by simple guard(mutex). The code
needs no labels after this at all. And it is pretty clear that the code
has not fiddled with pm_state at that point.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: 5e227ef2aa38 (serial: uart_poll_init() should power on the UART)
Cc: stable@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240805102046.307511-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do not see lots of these reports.
Or it cannot be NULL at this point at all for some reason :P.
Until the above is investigated, stay on the safe side and move this
dereference to the if too.
I got this inconsistency from Coverity under CID 1585130. Thanks.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In tty_dev_name_to_number(), a guard can help to make the code easier to
follow. Especially how 0 is returned in the successful case. So use a
guard there.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240805102046.307511-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-17-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The first element in uart_8250_port is a structure, so initializing
it to 0 causes a warning on newer compilers:
drivers/tty/serial/8250/8250_platform.c: In function 'serial8250_platform_probe':
drivers/tty/serial/8250/8250_platform.c:111:40: error: excess elements in struct initializer [-Werror]
111 | struct uart_8250_port uart = { 0 };
Use the modern empty {} initializer instead that works on all
supported compilers.
Fixes: d9e5a0ce2f16 ("serial: 8250_platform: Enable generic 16550A platform devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20240807075751.2206508-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The acpi_platform_serial_table[] array is defined globally without
an #ifdef check for CONFIG_ACPI, so ACPI_PTR() makes no sense
here:
drivers/tty/serial/8250/8250_platform.c:271:36: error: 'acpi_platform_serial_table' defined but not used [-Werror=unused-const-variable=]
271 | static const struct acpi_device_id acpi_platform_serial_table[] = {
Fixes: d9e5a0ce2f16 ("serial: 8250_platform: Enable generic 16550A platform devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807075751.2206508-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The return value uv_set_shared() and uv_remove_shared() (which are
wrappers around the share() function) is not always checked. The system
integrity of a protected guest depends on the Share and Unshare UVCs
being successful. This means that any caller that fails to check the
return value will compromise the security of the protected guest.
No code path that would lead to such violation of the security
guarantees is currently exercised, since all the areas that are shared
never get unshared during the lifetime of the system. This might
change and become an issue in the future.
The Share and Unshare UVCs can only fail in case of hypervisor
misbehaviour (either a bug or malicious behaviour). In such cases there
is no reasonable way forward, and the system needs to panic.
This patch replaces the return at the end of the share() function with
a panic, to guarantee system integrity.
Fixes: 5abb9351dfd9 ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801112548.85303-1-imbrenda@linux.ibm.com
Message-ID: <20240801112548.85303-1-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Fixed up patch subject]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
The function returns with the ppm_lock held if the PPM is
busy or there's an error.
Reported-and-tested-by: Luciano Coelho <luciano.coelho@intel.com>
Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reported-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20240806112029.2984319-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
source capability message
Since commit (122968f8dda8 usb: typec: tcpm: avoid resets for missing
source capability messages), state will change from SNK_WAIT_CAPABILITIES
to SNK_WAIT_CAPABILITIES_TIMEOUT. We need to change SNK_WAIT_CAPABILITIES
-> SNK_READY path to SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_READY
accordingly. Otherwise, the sink port will never change to SNK_READY state
if the source does't have PD capability.
[ 503.547183] pending state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT @ 310 ms [rev3 NONE_AMS]
[ 503.857239] state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT [delayed 310 ms]
[ 503.857254] PD TX, header: 0x87
[ 503.862440] PD TX complete, status: 2
[ 503.862484] state change SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_UNATTACHED [rev3 NONE_AMS]
Fixes: 122968f8dda8 ("usb: typec: tcpm: avoid resets for missing source capability messages")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20240802064156.1846768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ``alt`` parameter was used as a way to differentiate between
f->disable() and f->set_alt(). As the code paths diverge quite a bit,
pull out the f->disable() code from ffs_func_set_alt(), everything will
become clearer and less error prone. No change in functionality
intended.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-3-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The blamed commit made ffs_func_disable() always return -EINVAL as the
method calls ffs_func_set_alt() with the ``alt`` argument being
``(unsigned)-1``, which is always greater than MAX_ALT_SETTINGS.
Use the MAX_ALT_SETTINGS check just in the f->set_alt() code path,
f->disable() doesn't care about the ``alt`` parameter.
Make a surgical fix, but really the f->disable() code shall be pulled
out from ffs_func_set_alt(), the code will become clearer. A patch will
follow.
Note that ffs_func_disable() always returning -EINVAL made pixel6 crash
on USB disconnect.
Fixes: 2f550553e23c ("usb: gadget: f_fs: Add the missing get_alt callback")
Cc: stable <stable@kernel.org>
Reported-by: William McVicker <willmcvicker@google.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fix for 6.11-rc2
Here's a fix for an issue when using the usb_debug driver with Xen.
This change has been in linux-next for a couple of days with no reported
issues.
* tag 'usb-serial-6.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: debug: do not echo input by default
|
|
The kvm_hypercall() set for LoongArch is limited to a1-a5. So the
mention of a6 in the comment is undefined that needs to be rectified.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Dandan Zhang <zhangdandan@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1. "KVM_PRIVATE_MEM_SLOTS" is renamed as "KVM_INTERNAL_MEM_SLOTS".
2. "KVM_INTERNAL_MEM_SLOTS" defaults to zero, so it is not necessary to
define it in LoongArch's asm/kvm_host.h.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bdd1c37a315bc50ab14066c4852bc8dcf070451e
Link: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b075450868dbc0950f0942617f222eeb989cad10
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
