summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-22net: ipa: get rid of ipa_cmd_info->directionAlex Elder
The direction field of the ipa_cmd_info structure is set, but never used. It seems it might have been used for the DMA_SHARED_MEM immediate command, but the DIRECTION flag is set based on the value of the passed-in direction flag there. Anyway, remove this unused field from the ipa_cmd_info structure. This is done as a separate patch to make it very obvious that it's not required. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: ipa: count the number of modem TX endpointsAlex Elder
In ipa_endpoint_modem_exception_reset_all(), a high estimate was made of the number of endpoints that need their status register updated. We only used what was needed, so the high estimate didn't matter much. However the next few patches are going to limit the number of commands in a single transaction, and the overestimate would exceed that. So count the number of modem TX endpoints at initialization time, and use it in ipa_endpoint_modem_exception_reset_all(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: ipa: kill gsi_trans_commit_wait_timeout()Alex Elder
Since the beginning gsi_trans_commit_wait_timeout() has existed to provide a way to allow waiting a limited time for a transaction to complete. But that function has never been used. In fact, there is no use for this function, because a transaction committed to hardware should *always* complete. The only reason it might not complete is if there were a hardware failure, or perhaps a system configuration error. Furthermore, if a timeout ever did occur, the IPA hardware would be in an indeterminate state, from which there is no recovery. It would require some sort of complete IPA reset, and would require the participation of the modem, and at this time there is no such sequence defined. So get rid of the definition of gsi_trans_commit_wait_timeout(), and update a few comments accordingly. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: ipa: specify RX aggregation time limit in config dataAlex Elder
Don't assume that a 500 microsecond time limit should be used for all receive endpoints that support aggregation. Instead, specify the time limit to use in the configuration data. Set a 500 microsecond limit for all existing RX endpoints, as before. Checking for overflow for the time limit field is a bit complicated. Rather than duplicate a lot of code in ipa_endpoint_data_valid_one(), call WARN() if any value is found to be too large when encoding it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: ipa: support hard aggregation limitsAlex Elder
Add a new flag for AP receive endpoints that indicates whether a "hard limit" is used as a criterion for closing aggregation. Add comments explaining the difference between "hard" and "soft" aggregation limits. Pass a flag to ipa_aggr_size_kb() so it computes the proper aggregation size value whether using hard or soft limits. Move that function earlier in "ipa_endpoint.c" so it can be used without a forward-reference. Update ipa_endpoint_data_valid_one() so it validates endpoints whose data indicate a hard aggregation limit is used, and so it reports set aggregation flags for endpoints without aggregation enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: ipa: make endpoint HOLB drop configurableAlex Elder
Add a new Boolean flag for RX endpoints defining whether HOLB drop is initially enabled or disabled for the endpoint. All existing AP endpoints should have HOLB drop disabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22qed: fix typos in commentsJulia Lawall
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22nfp: flower: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: marvell: prestera: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22cirrus: cs89x0: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: qed: fix typos in commentsJulia Lawall
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net/mlx5: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: mvpp2: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: sparx5: switchdev: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22hwmon: (aquacomputer_d5next) Fix an error handling path in aqc_probe()Christophe JAILLET
If no memory can be allocated, some resources still need to be released as already done in the other error handling paths. Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/be6b955d50de140fcc96bd116150b435021bf567.1653225250.git.christophe.jaillet@wanadoo.fr Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22afs: Fix afs_getattr() to refetch file status if callback break occurredDavid Howells
If a callback break occurs (change notification), afs_getattr() needs to issue an FS.FetchStatus RPC operation to update the status of the file being examined by the stat-family of system calls. Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared on a vnode by a callback break. Skip this if AT_STATX_DONT_SYNC is set. This can be tested by appending to a file on one AFS client and then using "stat -L" to examine its length on a machine running kafs. This can also be watched through tracing on the kafs machine. The callback break is seen: kworker/1:1-46 [001] ..... 978.910812: afs_cb_call: c=0000005f YFSCB.CallBack kworker/1:1-46 [001] ...1. 978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb kworker/1:1-46 [001] ..... 978.911062: afs_call_done: c=0000005f ret=0 ab=0 [0000000082994ead] And then the stat command generated no traffic if unpatched, but with this change a call to fetch the status can be observed: stat-4471 [000] ..... 986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus stat-4471 [000] ..... 986.745578: afs_call_done: c=000000ab ret=0 ab=0 [0000000087fc8c84] Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.") Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Tested-by: Markus Suvanto <markus.suvanto@gmail.com> Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010 Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-22hwmon: (sl28cpld) Fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-37-Julia.Lawall@inria.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Check PEC support before reading other registersAdam Wujek
Make sure that the support of PEC is determined before the read of other registers. Otherwise the validation of PEC can trigger an error on the read of STATUS_BYTE or STATUS_WORD registers. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without the move of the code, at the second load of the driver (or bind) the STATUS_BYTE or STATUS_WORD register is always read with PEC enabled, which is likely to cause a read error resulting with fail of a driver load (or bind). Signed-off-by: Adam Wujek <dev_public@wujek.eu> Link: https://lore.kernel.org/r/20220519233334.438621-1-dev_public@wujek.eu Fixes: 75d2b2b06bd84 ("hwmon: (pmbus) disable PEC if not enabled") Fixes: 4e5418f787ec5 ("hwmon: (pmbus_core) Check adapter PEC support") [groeck: Added Fixes: tags, dropped continuation line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (dimmtemp) Fix bitmap handlingGuenter Roeck
Building arm:allmodconfig may fail with the following error. In function 'fortify_memcpy_chk', inlined from 'bitmap_copy' at include/linux/bitmap.h:261:2, inlined from 'bitmap_copy_clear_tail' at include/linux/bitmap.h:270:2, inlined from 'bitmap_from_u64' at include/linux/bitmap.h:622:2, inlined from 'check_populated_dimms' at drivers/hwmon/peci/dimmtemp.c:284:2: include/linux/fortify-string.h:344:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter) The problematic code is bitmap_from_u64(priv->dimm_mask, dimm_mask); dimm_mask is declared as u64, but the bitmap in priv->dimm_mask is only 24 bit wide. On 32-bit systems, this results in writes over the end of the bitmap. Fix the problem by using u32 instead of u64 for dimm_mask. This is currently sufficient, and a compile time check to ensure that the number of dimms does not exceed the bit map size is already in place. Fixes: 73bc1b885dae ("hwmon: peci: Add dimmtemp driver") Cc: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (lm90) enable extended range according to DTS nodeHolger Brunck
Some lm90 compatible devices can operate in an extended temperature mode. This feature is now enabled if the property is set in the corresponding device tree node. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220517135614.8185-2-holger.brunck@hitachienergy.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: hwmon: lm90: add ti,extended-range-enable propertyHolger Brunck
Some devices can operate in an extended temperature mode. Therefore add a boolean ti,extended-range-enable to be able to select this feature in the device tree node. Also make sure that this feature can only be enabled for the devices supporting this feature. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517135614.8185-1-holger.brunck@hitachienergy.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: hwmon: lm90: add missing ti,tmp461Holger Brunck
This sensor is already supported from the driver, but is missing in the list of compatible devices in the yaml file. Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220517075626.16809-1-holger.brunck@hitachienergy.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (ibmaem) Directly use ida_alloc()/free()keliu
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220517063126.2142637-2-liuke94@huawei.com [groeck: Updated subject to include driver name] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: Directly use ida_alloc()/free()keliu
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220517063126.2142637-1-liuke94@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (asus-ec-sensors) fix Formula VIII definitionEugene Shalygin
The ROG CROSSHAIR VIII FORMULA board has the same sensors as the CROSSHAIR VIII HERO [1] thus let's join their definitions which adds missing sensors for Formula. [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/740 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220517080508.1910953-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: trivial-devices: Add xdp152Greg.Schwendimann@infineon.com
Add Infineon Digital Multi-phase xdp152 family controllers. Signed-off-by: Greg Schwendimann <Greg.Schwendimann@infineon.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1a600fd51db942389a5078a72c3bf411@infineon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (sl28cpld-hwmon) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pwm-fan) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (mr75203) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (ltc2992) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (as370-hwmon) Use HWMON_CHANNEL_INFO macroGuenter Roeck
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @s@ identifier i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @r@ initializer list elements; identifier s.i; @@ -u32 i[] = { - elements, - 0 -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the coccinelle script. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: Make chip parameter for with_info API mandatoryGuenter Roeck
Various attempts were made recently to "convert" the old hwmon_device_register() API to devm_hwmon_device_register_with_info() by just changing the function name without actually converting the driver. Prevent this from happening by making the 'chip' parameter of devm_hwmon_device_register_with_info() mandatory. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal()Guenter Roeck
The thermal subsystem registers a hwmon device without providing chip information or sysfs attribute groups. While undesirable, it would be difficult to change. On the other side, it abuses the hwmon_device_register_with_info API by not providing that information. Use new API specifically created for the thermal subsystem instead to let us enforce the 'chip' parameter for other callers of hwmon_device_register_with_info(). Acked-by: Rafael J . Wysocki <rafael@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: Introduce hwmon_device_register_for_thermalGuenter Roeck
The thermal subsystem registers a hwmon driver without providing chip or sysfs group information. This is for legacy reasons and would be difficult to change. At the same time, we want to enforce that chip information is provided when registering a hwmon device using hwmon_device_register_with_info(). To enable this, introduce a special API for use only by the thermal subsystem. Acked-by: Rafael J . Wysocki <rafael@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (acpi_power_meter) Fix style issuesCorentin Labbe
Fix style issues found by checkpatch. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220509063010.3878134-2-clabbe@baylibre.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (asus-ec-sensors) add ROG STRIX X570-E GAMING WIFI IIDebabrata Banerjee
Adds support for the ROG STRIX X570-E GAMING WIFI II board and simplifies formatting for the list of supported models. Signed-off-by: Debabrata Banerjee <dbavatar@gmail.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220505073351.123753-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (nct6775) Add i2c driverZev Weiss
This driver provides an i2c I/O mechanism for the core nct6775 driver, as might be used by a BMC. Because the Super I/O chip is shared with the host CPU in such a scenario (and the host should ultimately be in control of it), the i2c driver is strictly read-only to avoid interfering with any usage by the host (aside from the bank-select register, which seems to be replicated for the i2c interface). Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Tested-by: Renze Nicolai <renze@rnplus.nl> Link: https://lore.kernel.org/r/20220428012707.24921-3-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: hwmon: Add nuvoton,nct6775Zev Weiss
These Super I/O chips have an i2c interface that some systems expose to a BMC; the BMC's device tree can now describe that via this binding. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220428012707.24921-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (nct6775) add ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI IIDenis Pauk
Boards such as * PRO H410T * PRIME H410M-R * ROG STRIX X570-E GAMING WIFI II have got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the WMI monitoring list. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Reported-by: renedis <renedis@hotmail.com> Reported-by: Dmitrii Levchenko <e_dimas@rambler.ru> Reported-by: Hubert Banas <hubert.banas@gmail.com> Link: https://lore.kernel.org/r/20220507072933.3013-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (lm83) Remove unused include directivesKarl Mehltretter
Some include directives are no longer necessary due to previous driver changes. Remove them now to further improve driver code clarity. Mutex usage has ceased since commit 719af4f1a40b ("hwmon: (lm83) Use regmap"). Ever since commit a0ac840d99fa ("hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups") functions sysfs_create_group and sysfs_remove_group are no longer used by the driver. Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com> Link: https://lore.kernel.org/r/20220508144601.22796-1-kmehltretter@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Add get_voltage/set_voltage opsMårten Lindahl
The pmbus core does not have operations for getting or setting voltage. Add functions get/set voltage for the dynamic regulator framework. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220503104631.3515715-5-marten.lindahl@axis.com [groeck: cosmetic alignment / empty line fixes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (pmbus) Register with thermal for PSC_TEMPERATUREEduardo Valentin
Some pmbus device drivers have device tree support and may want to use of-thermal to register a thermal zone OF sensor for those device drivers. This way we allow describing device tree thermal zones for pmbus device drivers with device tree support. This patch achieves this by registering pmbus sensors with thermal subsystem if they are PSC_TEMPERATURE and are providing _input hwmon interface. Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:PMBUS HARDWARE MONITORING DRIVERS) Cc: Jean Delvare <jdelvare@suse.com> (maintainer:HARDWARE MONITORING) Cc: linux-hwmon@vger.kernel.org (open list:PMBUS HARDWARE MONITORING DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Eduardo Valentin <evalenti@kernel.org> Link: https://lore.kernel.org/r/20220428174926.2150-1-eduval@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (adt7475) Use enum chips when loading attenuator settingsChris Packham
Make use of enum chips and use a switch statement in load_attenuators() so that the compiler can tell us if we've failed to cater for a supported chip. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220323034056.260455-4-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (adt7475) Add support for pin configurationChris Packham
The adt7473, adt7475, adt7476 and adt7490 have pins that can be used for different functions. On the adt7473 and adt7475 this is pins 5 and 9. On the adt7476 and adt7490 this is pins 10 and 14. The first pin can either be PWM2(default) or SMBALERT#. The second pin can be TACH4(default), THERM#, SMBALERT# or GPIO. The adt7475 driver has always been able to detect the configuration if it had been done by an earlier boot stage. Add support for configuring the pins based on the hardware description in the device tree. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220323034056.260455-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: hwmon: Document adt7475 pin-function propertiesChris Packham
The adt7473, adt7475, adt7476 and adt7490 have pins that can be used for different functions. Add bindings so that it is possible to describe what pin functions are intended by the hardware design. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220323034056.260455-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: add driver for the Microchip LAN966x SoCMichael Walle
Add support for the temperatur sensor and the fan controller on the Microchip LAN966x SoC. Apparently, an Analog Bits PVT sensor is used which can measure temperature and process voltages. But only a forumlae for the temperature sensor is known. Additionally, the SoC support a fan tacho input as well as a PWM signal to control the fan. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220401214032.3738095-5-michael@walle.cc [groeck: Added missing reference in Documentation/hwmon/index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22dt-bindings: hwmon: add Microchip LAN966x bindingsMichael Walle
Add a binding for the temperature sensor and the fan controller on the Microchip LAN966x family. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20220401214032.3738095-4-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-22hwmon: (bt1-pvt) use generic polynomial functionsMichael Walle
The polynomial calculation function was moved into lib/ to be able to reuse it. Move over to this one. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220401214032.3738095-3-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-12 21:36:34 +0000