summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-19dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatibleBjorn Andersson
Add compatible for the LMh blocks found in the Qualcomm sc8180x platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220502164504.3972938-2-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom/lmh: Add sc8180x compatibleBjorn Andersson
The LMh instances in the Qualcomm SC8180X platform looks to behave similar to those in SM8150, add additional compatibles to allow platform specific behavior to be added if needed. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220502164504.3972938-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/rz2gl: Fix OTP Calibration Register valuesBiju Das
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022), the bit 31 of TSU OTP Calibration Register(OTPTSUTRIM) indicates whether bit [11:0] of OTPTSUTRIM is valid or invalid. This patch updates the code to reflect this change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220428093346.7552-1-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindingsBiju Das
Document RZ/G2UL TSU bindings. The TSU block on RZ/G2UL is identical to one found on RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-tsu" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501081930.23743-1-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal: thermal_of: fix typo on __thermal_bind_paramsCorentin Labbe
Add a missing s to __thermal_bind_param kernel doc comment. This fixes the following sparse warnings: drivers/thermal/thermal_of.c:50: warning: expecting prototype for struct __thermal_bind_param. Prototype was for struct __thermal_bind_params instead Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220426064113.3787826-1-clabbe@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19tools/thermal: remove unneeded semicolonJiapeng Chong
Fix the following coccicheck warnings: ./tools/thermal/thermometer/thermometer.c:147:3-4: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220427030619.81556-2-jiapeng.chong@linux.alibaba.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19tools/lib/thermal: remove unneeded semicolonJiapeng Chong
Fix the following coccicheck warnings: ./tools/lib/thermal/commands.c:215:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220427030619.81556-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probeZheng Yongjun
platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. Fixes: 250e211057c72 ("thermal: broadcom: Add Stingray thermal driver") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220425092929.90412-1-zhengyongjun3@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19tools/thermal: Add thermal daemon skeletonDaniel Lezcano
This change provides a simple daemon skeleton. It is an example of how to use the thermal library which wraps all the complex code related to the netlink and transforms it into a callback oriented code. The goal of this skeleton is to give a base brick for anyone interested in writing its own thermal engine or as an example to rely on to write its own thermal monitoring implementation. In the future, it will evolve with more features and hopefully more logic. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220420160933.347088-5-daniel.lezcano@linaro.org
2022-05-19tools/thermal: Add a temperature capture toolDaniel Lezcano
The 'thermometer' tool allows to capture the temperature of a set of thermal zones defined in a configuration file at a specified rate. It is designed to have the lowest possible overhead. It will write the captured temperature per thermal zone per file so making easier to write a gnuplot script. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220420160933.347088-4-daniel.lezcano@linaro.org
2022-05-19tools/thermal: Add util libraryDaniel Lezcano
The next changes will provide a couple of tools using some common functions provided by this library. It provides basic wrappers for: - mainloop - logging - timestamp Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220420160933.347088-3-daniel.lezcano@linaro.org
2022-05-19tools/lib/thermal: Add a thermal libraryDaniel Lezcano
The thermal framework implements a netlink notification mechanism to be used by the userspace to have a thermal configuration discovery, trip point changes or violation, cooling device changes notifications, etc... This library provides a level of abstraction for the thermal netlink notification allowing the userspace to connect to the notification mechanism more easily. The library is callback oriented. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220420160933.347088-2-daniel.lezcano@linaro.org
2022-05-19thermal/drivers/thermal_of: Add change_mode ops support for thermal_of sensorManaf Meethalavalappu Pallikunhi
The sensor driver which register through thermal_of interface doesn't have an option to get thermal zone mode change notification from thermal core. Add support for change_mode ops in thermal_of interface so that sensor driver can use this ops for mode change notification. Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com> Link: https://lore.kernel.org/r/1646767586-31908-1-git-send-email-quic_manafm@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/bcm2711: Don't clamp temperature at zeroStefan Wahren
The thermal sensor on BCM2711 is capable of negative temperatures, so don't clamp the measurements at zero. Since this was the only use for variable t, drop it. This change based on a patch by Dom Cobley, who also tested the fix. Fixes: 59b781352dc4 ("thermal: Add BCM2711 thermal driver") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412195423.104511-1-stefan.wahren@i2se.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/tsens: Add compat string for the qcom,msm8960Dmitry Baryshkov
On apq8064 (msm8960) platforms the tsens device is created manually by the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens device instantiated from the device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat stringDmitry Baryshkov
Add compatibility string for the thermal sensors on MSM8960/APQ8064 platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220406002648.393486-2-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/k3: Add hwmon supportMassimiliano Minella
Expose the thermal sensors on K3 AM654 as hwmon devices, so that temperatures could be read using lm-sensors. Signed-off-by: Massimiliano Minella <massimiliano.minella@gmail.com> Link: https://lore.kernel.org/r/20220401151656.913166-1-massimiliano.minella@se.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTMJishnu Prakash
Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a close counterpart of PMIC7 ADC and has the same functionality as PMIC5 ADC_TM, for threshold monitoring and interrupt generation. It is present on PMK8350 alone, like PMIC7 ADC and can be used to monitor up to 8 ADC channels, from any of the PMIC7 PMICs having ADC on a target, through PBS(Programmable Boot Sequence). Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-5-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for multiple generations of devicesJishnu Prakash
Refactor code to support multiple generations of ADC_TM devices by defining gen number, irq name and disable, configure, isr and init APIs in the individual data structs. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TMJishnu Prakash
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert temperature to raw ADC code, for setting thresholds for thermistor channels. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindingsJishnu Prakash
Add documentation for PMIC5 Gen2 ADC_TM peripheral. It is used for monitoring ADC channel thresholds for PMIC7-type PMICs. It is present on PMK8350, like PMIC7 ADC and can be used to monitor up to 8 ADC channels, from any of the PMIC7 PMICs on a target, through PBS(Programmable Boot Sequence). Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1648991869-20899-2-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/rcar_thermal: Use platform_get_irq_optional() to get the ↵Lad Prabhakar
interrupt platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220110144039.5810-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19dt-bindings: thermal: rzg2l-thermal: Document RZ/V2L bindingsLad Prabhakar
Document RZ/V2L TSU bindings. The TSU block on RZ/V2L is identical to one found on RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-tsu" will be used as a fallback. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220308212315.4551-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomapMaarten Lankhorst
When removing short term pins, I've changed the the batch buffer pinning for relocation to use __i915_vma_pin, because i915_gem_object_ggtt_pin_ww was destroying the old vma. This caused regressions, because the functions are not identical. Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again on ggtt-only platforms, but only if the batch can be pinned without being moved. Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.") Cc: Matthew Auld <matthew.auld@intel.com> Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806 Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-05-19nfp: flower: support ct merging when mangle action existsYinjun Zhang
Current implementation of ct merging doesn't support the case that the fields mangling in pre_ct rules are matched in post_ct rules. This change is to support merging when mangling mac address, ip address, tos, ttl and l4 port. VLAN and MPLS mangling is not involved yet. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220518075055.130649-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19net: fec: Avoid allocating rx buffer using ATOMIC in ndo_openMichael Trimarchi
Make ndo_open less sensitive to memory pressure. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220518062007.10056-1-michael@amarulasolutions.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-19x86/sev: Mark the code returning to user space as syscall gapLai Jiangshan
When returning to user space, %rsp is user-controlled value. If it is a SNP-guest and the hypervisor decides to mess with the code-page for this path while a CPU is executing it, a potential #VC could hit in the syscall return path and mislead the #VC handler. So make ip_within_syscall_gap() return true in this case. Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220412124909.10467-1-jiangshanlai@gmail.com
2022-05-19riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOLSunil V L
Add support for getting the boot hart ID from the Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This method is preferred over the existing DT based approach since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220519051512.136724-2-sunilvl@ventanamicro.com [ardb: minor tweaks for coding style and whitespace] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-05-19net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.Andrew Lunn
It is possible to stack bridges on top of each other. Consider the following which makes use of an Ethernet switch: br1 / \ / \ / \ br0.11 wlan0 | br0 / | \ p1 p2 p3 br0 is offloaded to the switch. Above br0 is a vlan interface, for vlan 11. This vlan interface is then a slave of br1. br1 also has a wireless interface as a slave. This setup trunks wireless lan traffic over the copper network inside a VLAN. A frame received on p1 which is passed up to the bridge has the skb->offload_fwd_mark flag set to true, indicating that the switch has dealt with forwarding the frame out ports p2 and p3 as needed. This flag instructs the software bridge it does not need to pass the frame back down again. However, the flag is not getting reset when the frame is passed upwards. As a result br1 sees the flag, wrongly interprets it, and fails to forward the frame to wlan0. When passing a frame upwards, clear the flag. This is the Rx equivalent of br_switchdev_frame_unmark() in br_dev_xmit(). Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-18ptp: ocp: change sysfs attr group handlingJonathan Lemon
In the detach path, the driver calls sysfs_remove_group() for the groups it believes has been registered. However, if the group was never previously registered, then this causes a splat. Instead, compute the groups that should be registered in advance, and then call sysfs_create_groups(), which registers them all at once. Update the error handling appropriately. Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating") Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net/mlx5: fix multiple definitions of mlx5_lag_mpesw_init / ↵Jakub Kicinski
mlx5_lag_mpesw_cleanup static inline is needed in the header. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Acked-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220518183022.2034373-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19Merge tag 'amd-drm-fixes-5.18-2022-05-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-18: amdgpu: - Suspend/resume regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518202045.9123-1-alexander.deucher@amd.com
2022-05-18selftests: forwarding: fix missing backslashJoachim Wiberg
Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to not be installed. Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18sfc: siena: Have a unique wrapper ifndef for efx channels headerSaeed Mahameed
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be EFX_SIENA_CHANNELS_H to avoid build system confusion. This fixes the following build break: drivers/net/ethernet/sfc/ptp.c:2191:28: error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’? 2191 | .copy = efx_copy_channel, Fixes: 6e173d3b4af9 ("sfc: Copy shared files needed for Siena (part 1)") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'octeon_ep-fix-the-error-handling-path-of-octep_request_irqs'Jakub Kicinski
Christophe says: ==================== octeon_ep: Fix the error handling path of octep_request_irqs() I send a small serie to ease review and because I'm sighly less confident with the 2nd patch. ==================== Link: https://lore.kernel.org/r/cover.1652819974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix irq releasing in the error handling path of octep_request_irqs()Christophe JAILLET
When taken, the error handling path does not undo correctly what has already been allocated. Introduce a new loop index, 'j', in order to simplify the error handling path and rewrite part of it. It is now written with the same logic and intermediate variables used when resources are allocated. This is much more straightforward. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18octeon_ep: Fix a memory leak in the error handling path of octep_request_irqs()Christophe JAILLET
'oct->non_ioq_irq_names' is not freed in the error handling path of octep_request_irqs(). Add the missing kfree(). Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Veerasenareddy Burru <vburru@marvell.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge branch 'adin-add-support-for-clock-output'Jakub Kicinski
Josua Mayer says: ==================== adin: add support for clock output This patch series adds support for configuring the two clock outputs of adin 1200 and 1300 PHYs. Certain network controllers require an external reference clock which can be provided by the PHY. One of the replies to v1 was asking why the common clock framework isn't used. Currently no PHY driver has implemented providing a clock to the network controller. Instead they rely on vendor extensions to make the appropriate configuration. For example ar8035 uses qca,clk-out-frequency - this patchset aimed to replicate the same functionality. Finally the 125MHz free-running clock is enabled in the device-tree for SolidRun i.MX6 SoMs, to support revisions 1.9 and later, where the original phy has been replaced with an adin 1300. To avoid introducing new warning messages during boot for SoMs before rev 1.9, the status field of the new phy node is disabled by default, and will be enabled by U-Boot on demand. ==================== Link: https://lore.kernel.org/r/20220517085143.3749-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9Josua Mayer
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300, add an entry for it next to the original. As Russell King pointed out, additional phy nodes cause warnings like: mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing To avoid this the new node has its status set to disabled. U-Boot will be modified to enable the appropriate phy node after probing. The existing ar8035 nodes have to stay enabled by default to avoid breaking existing systems when they update Linux only. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18net: phy: adin: add support for clock outputJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. SyncE should be configured dynamically at runtime, however Linux does not currently have a toggle for this, so support is explicitly omitted. Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Signed-off-by: Josua Mayer<josua@solid-run.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18dt-bindings: net: adin: document phy clock output propertiesJosua Mayer
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add DT properties to configure both pins. Technically the phy also supports a recovered 125MHz clock for synchronous ethernet. However SyncE should be configured dynamically at runtime, so it is explicitly omitted in this binding. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Reduce number of hardware offload retries from flowtable datapath which might hog system with retries, from Felix Fietkau. 2) Skip neighbour lookup for PPPoE device, fill_forward_path() already provides this and set on destination address from fill_forward_path for PPPoE device, also from Felix. 4) When combining PPPoE on top of a VLAN device, set info->outdev to the PPPoE device so software offload works, from Felix. 5) Fix TCP teardown flowtable state, races with conntrack gc might result in resetting the state to ESTABLISHED and the time to one day. Joint work with Oz Shlomo and Sven Auhagen. 6) Call dst_check() from flowtable datapath to check if dst is stale instead of doing it from garbage collector path. 7) Disable register tracking infrastructure, either user-space or kernel need to pre-fetch keys inconditionally, otherwise register tracking assumes data is already available in register that might not well be there, leading to incorrect reductions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown netfilter: nft_flow_offload: fix offload with pppoe + vlan net: fix dev_fill_forward_path with pppoe + bridge netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices netfilter: flowtable: fix excessive hw offload attempts after failure ==================== Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-18Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a small fix for a missing fifo time assigment for the head insertion case in mq-deadline" * tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block: block/mq-deadline: Set the fifo_time member also if inserting at head
2022-05-18Merge tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two small changes fixing issues from the 5.18 merge window: - Fix wrong ordering of a tracepoint (Dylan) - Fix MSG_RING on IOPOLL rings (me)" * tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block: io_uring: don't attempt to IOPOLL for MSG_RING requests io_uring: fix ordering of args in io_uring_queue_async_work
2022-05-18Merge tag 'audit-pr-20220518' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "A single audit patch to fix a problem where a task's audit_context was not being properly reset with io_uring" * tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
2022-05-18Merge tag 'selinux-pr-20220518' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "A single SELinux patch to fix an error path that was doing the wrong thing with respect to freeing memory" * tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix bad cleanup on error in hashtab_duplicate()
2022-05-18Merge branch 'arm/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The SoC bug fixes have calmed down sufficiently, there is one minor update for the MAINTAINERS file, and few bug fixes for dts descriptions: - Updates to the BananaPi R2-Pro (rk3568) dts to match production hardware rather than the prototype version. - Qualcomm sm8250 soundwire gets disabled on some machines to avoid crashes - A number of aspeed SoC specific fixes, addressing incorrect pin cotrol settings, some values in the romed8hm board, and a revert for an accidental removal of a DT node" * 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: omap: remove me as a maintainer ARM: dts: aspeed: Add video engine to g6 ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi arm64: dts: qcom: sm8250: don't enable rx/tx macro by default arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro arm64: dts: rockchip: Change io-domains of bpi-r2-pro
2022-05-18selftests/bpf: Add missed ima_setup.sh in MakefileHangbin Liu
When build bpf test and install it to another folder, e.g. make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \ SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests The ima_setup.sh is missed in target folder, which makes test_ima failed. Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
2022-05-18Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull misc fixes from Al Viro: "vhost race fix and a percpu_ref_init-caused cgroup double-free fix. The latter had manifested as buggered struct mount refcounting - those are also using percpu data structures, but anything that does percpu allocations could be hit" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix double fget() in vhost_net_set_backend() percpu_ref_init(): clean ->percpu_count_ref on failure
2022-05-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull mlx5 fix from Michael Tsirkin: "One last minute fixup The patch has been on list for a while but as it was posted as part of a thread it was missed" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Use consistent RQT size
generated by cgit (git 2.34.1) at 2025-09-14 10:04:27 +0000