| Age | Commit message (Collapse) | Author |
|---|
|
Userfaultfd self-test fails occasionally, indicating a memory corruption.
Analyzing this problem indicates that there is a real bug since mmap_lock
is only taken for read in mwriteprotect_range() and defers flushes, and
since there is insufficient consideration of concurrent deferred TLB
flushes in wp_page_copy(). Although the PTE is flushed from the TLBs in
wp_page_copy(), this flush takes place after the copy has already been
performed, and therefore changes of the page are possible between the time
of the copy and the time in which the PTE is flushed.
To make matters worse, memory-unprotection using userfaultfd also poses a
problem. Although memory unprotection is logically a promotion of PTE
permissions, and therefore should not require a TLB flush, the current
userrfaultfd code might actually cause a demotion of the architectural PTE
permission: when userfaultfd_writeprotect() unprotects memory region, it
unintentionally *clears* the RW-bit if it was already set. Note that this
unprotecting a PTE that is not write-protected is a valid use-case: the
userfaultfd monitor might ask to unprotect a region that holds both
write-protected and write-unprotected PTEs.
The scenario that happens in selftests/vm/userfaultfd is as follows:
cpu0 cpu1 cpu2
---- ---- ----
[ Writable PTE
cached in TLB ]
userfaultfd_writeprotect()
[ write-*unprotect* ]
mwriteprotect_range()
mmap_read_lock()
change_protection()
change_protection_range()
...
change_pte_range()
[ *clear* “write”-bit ]
[ defer TLB flushes ]
[ page-fault ]
...
wp_page_copy()
cow_user_page()
[ copy page ]
[ write to old
page ]
...
set_pte_at_notify()
A similar scenario can happen:
cpu0 cpu1 cpu2 cpu3
---- ---- ---- ----
[ Writable PTE
cached in TLB ]
userfaultfd_writeprotect()
[ write-protect ]
[ deferred TLB flush ]
userfaultfd_writeprotect()
[ write-unprotect ]
[ deferred TLB flush]
[ page-fault ]
wp_page_copy()
cow_user_page()
[ copy page ]
... [ write to page ]
set_pte_at_notify()
This race exists since commit 292924b26024 ("userfaultfd: wp: apply
_PAGE_UFFD_WP bit"). Yet, as Yu Zhao pointed, these races became apparent
since commit 09854ba94c6a ("mm: do_wp_page() simplification") which made
wp_page_copy() more likely to take place, specifically if page_count(page)
> 1.
To resolve the aforementioned races, check whether there are pending
flushes on uffd-write-protected VMAs, and if there are, perform a flush
before doing the COW.
Further optimizations will follow to avoid during uffd-write-unprotect
unnecassary PTE write-protection and TLB flushes.
Link: https://lkml.kernel.org/r/20210304095423.3825684-1-namit@vmware.com
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Signed-off-by: Nadav Amit <namit@vmware.com>
Suggested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's a runtime failure when running HW_TAGS-enabled kernel built with
GCC on hardware that doesn't support MTE. GCC-built kernels always have
CONFIG_KASAN_STACK enabled, even though stack instrumentation isn't
supported by HW_TAGS. Having that config enabled causes KASAN to issue
MTE-only instructions to unpoison kernel stacks, which causes the failure.
Fix the issue by disallowing CONFIG_KASAN_STACK when HW_TAGS is used.
(The commit that introduced CONFIG_KASAN_HW_TAGS specified proper
dependency for CONFIG_KASAN_STACK_ENABLE but not for CONFIG_KASAN_STACK.)
Link: https://lkml.kernel.org/r/59e75426241dbb5611277758c8d4d6f5f9298dac.1615215441.git.andreyknvl@google.com
Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, kasan_free_nondeferred_pages()->kasan_free_pages() is called
after debug_pagealloc_unmap_pages(). This causes a crash when
debug_pagealloc is enabled, as HW_TAGS KASAN can't set tags on an
unmapped page.
This patch puts kasan_free_nondeferred_pages() before
debug_pagealloc_unmap_pages() and arch_free_page(), which can also make
the page unavailable.
Link: https://lkml.kernel.org/r/24cd7db274090f0e5bc3adcdc7399243668e3171.1614987311.git.andreyknvl@google.com
Fixes: 94ab5b61ee16 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
process_madvise currently requires ptrace attach capability.
PTRACE_MODE_ATTACH gives one process complete control over another
process. It effectively removes the security boundary between the two
processes (in one direction). Granting ptrace attach capability even to a
system process is considered dangerous since it creates an attack surface.
This severely limits the usage of this API.
The operations process_madvise can perform do not affect the correctness
of the operation of the target process; they only affect where the data is
physically located (and therefore, how fast it can be accessed). What we
want is the ability for one process to influence another process in order
to optimize performance across the entire system while leaving the
security boundary intact.
Replace PTRACE_MODE_ATTACH with a combination of PTRACE_MODE_READ and
CAP_SYS_NICE. PTRACE_MODE_READ to prevent leaking ASLR metadata and
CAP_SYS_NICE for influencing process performance.
Link: https://lkml.kernel.org/r/20210303185807.2160264-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org
Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some architectures prefix all functions with a constant string ('.' on
ppc64). Add ARCH_FUNC_PREFIX, which may optionally be defined in
<asm/kfence.h>, so that get_stack_skipnr() can work properly.
Link: https://lkml.kernel.org/r/f036c53d-7e81-763c-47f4-6024c6c5f058@csgroup.eu
Link: https://lkml.kernel.org/r/20210304144000.1148590-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cache_alloc_debugcheck_after() performs checks on an object, including
adjusting the returned pointer. None of this should apply to KFENCE
objects. While for non-bulk allocations, the checks are skipped when we
allocate via KFENCE, for bulk allocations cache_alloc_debugcheck_after()
is called via cache_alloc_debugcheck_after_bulk().
Fix it by skipping cache_alloc_debugcheck_after() for KFENCE objects.
Link: https://lkml.kernel.org/r/20210304205256.2162309-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use %td for ptrdiff_t.
Link: https://lkml.kernel.org/r/3abbe4c9-16ad-c168-a90f-087978ccd8f7@csgroup.eu
Link: https://lkml.kernel.org/r/20210303121157.3430807-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Separating compiler-clang.h from compiler-gcc.h inadventently dropped the
definitions of the three HAVE_BUILTIN_BSWAP macros, which requires falling
back to the open-coded version and hoping that the compiler detects it.
Since all versions of clang support the __builtin_bswap interfaces, add
back the flags and have the headers pick these up automatically.
This results in a 4% improvement of compilation speed for arm defconfig.
Note: it might also be worth revisiting which architectures set
CONFIG_ARCH_USE_BUILTIN_BSWAP for one compiler or the other, today this is
set on six architectures (arm32, csky, mips, powerpc, s390, x86), while
another ten architectures define custom helpers (alpha, arc, ia64, m68k,
mips, nios2, parisc, sh, sparc, xtensa), and the rest (arm64, h8300,
hexagon, microblaze, nds32, openrisc, riscv) just get the unoptimized
version and rely on the compiler to detect it.
A long time ago, the compiler builtins were architecture specific, but
nowadays, all compilers that are able to build the kernel have correct
implementations of them, though some may not be as optimized as the inline
asm versions.
The patch that dropped the optimization landed in v4.19, so as discussed
it would be fairly safe to backport this revert to stable kernels to the
4.19/5.4/5.10 stable kernels, but there is a remaining risk for
regressions, and it has no known side-effects besides compile speed.
Link: https://lkml.kernel.org/r/20210226161151.2629097-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20210225164513.3667778-1-arnd@kernel.org/
Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 7b4693e644cb ("MAINTAINERS: add uapi directories to API/ABI
section") added include/uapi/ and arch/*/include/uapi/ so that patches
modifying them CC linux-api. However that was already done in the past
and resulted in too much noise and thus later removed, as explained in
b14fd334ff3d ("MAINTAINERS: trim the file triggers for ABI/API")
To prevent another round of addition and removal in the future, change the
entries to X: (explicit exclusion) for documentation purposes, although
they are not subdirectories of broader included directories, as there is
apparently no defined way to add plain comments in subsystem sections.
Link: https://lkml.kernel.org/r/20210301100255.25229-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a deadlock in bm_register_write:
First, in the begining of the function, a lock is taken on the binfmt_misc
root inode with inode_lock(d_inode(root)).
Then, if the user used the MISC_FMT_OPEN_FILE flag, the function will call
open_exec on the user-provided interpreter.
open_exec will call a path lookup, and if the path lookup process includes
the root of binfmt_misc, it will try to take a shared lock on its inode
again, but it is already locked, and the code will get stuck in a deadlock
To reproduce the bug:
$ echo ":iiiii:E::ii::/proc/sys/fs/binfmt_misc/bla:F" > /proc/sys/fs/binfmt_misc/register
backtrace of where the lock occurs (#5):
0 schedule () at ./arch/x86/include/asm/current.h:15
1 0xffffffff81b51237 in rwsem_down_read_slowpath (sem=0xffff888003b202e0, count=<optimized out>, state=state@entry=2) at kernel/locking/rwsem.c:992
2 0xffffffff81b5150a in __down_read_common (state=2, sem=<optimized out>) at kernel/locking/rwsem.c:1213
3 __down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1222
4 down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1355
5 0xffffffff811ee22a in inode_lock_shared (inode=<optimized out>) at ./include/linux/fs.h:783
6 open_last_lookups (op=0xffffc9000022fe34, file=0xffff888004098600, nd=0xffffc9000022fd10) at fs/namei.c:3177
7 path_openat (nd=nd@entry=0xffffc9000022fd10, op=op@entry=0xffffc9000022fe34, flags=flags@entry=65) at fs/namei.c:3366
8 0xffffffff811efe1c in do_filp_open (dfd=<optimized out>, pathname=pathname@entry=0xffff8880031b9000, op=op@entry=0xffffc9000022fe34) at fs/namei.c:3396
9 0xffffffff811e493f in do_open_execat (fd=fd@entry=-100, name=name@entry=0xffff8880031b9000, flags=<optimized out>, flags@entry=0) at fs/exec.c:913
10 0xffffffff811e4a92 in open_exec (name=<optimized out>) at fs/exec.c:948
11 0xffffffff8124aa84 in bm_register_write (file=<optimized out>, buffer=<optimized out>, count=19, ppos=<optimized out>) at fs/binfmt_misc.c:682
12 0xffffffff811decd2 in vfs_write (file=file@entry=0xffff888004098500, buf=buf@entry=0xa758d0 ":iiiii:E::ii::i:CF
", count=count@entry=19, pos=pos@entry=0xffffc9000022ff10) at fs/read_write.c:603
13 0xffffffff811defda in ksys_write (fd=<optimized out>, buf=0xa758d0 ":iiiii:E::ii::i:CF
", count=19) at fs/read_write.c:658
14 0xffffffff81b49813 in do_syscall_64 (nr=<optimized out>, regs=0xffffc9000022ff58) at arch/x86/entry/common.c:46
15 0xffffffff81c0007c in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:120
To solve the issue, the open_exec call is moved to before the write
lock is taken by bm_register_write
Link: https://lkml.kernel.org/r/20210228224414.95962-1-liorribak@gmail.com
Fixes: 948b701a607f1 ("binfmt_misc: add persistent opened binary handler for containers")
Signed-off-by: Lior Ribak <liorribak@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zero_user_segments() is used from __block_write_begin_int(), for example
like the following
zero_user_segments(page, 4096, 1024, 512, 918)
But new the zero_user_segments() implementation for for HIGHMEM +
TRANSPARENT_HUGEPAGE doesn't handle "start > end" case correctly, and hits
BUG_ON(). (we can fix __block_write_begin_int() instead though, it is the
old and multiple usage)
Also it calls kmap_atomic() unnecessarily while start == end == 0.
Link: https://lkml.kernel.org/r/87v9ab60r4.fsf@mail.parknet.co.jp
Fixes: 0060ef3b4e6d ("mm: support THPs in zero_user_segments")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the last missing piece of the COW-during-fork effort when there're
pinned pages found. One can reference 70e806e4e645 ("mm: Do early cow for
pinned pages during fork() for ptes", 2020-09-27) for more information,
since we do similar things here rather than pte this time, but just for
hugetlb.
Note that after Jason's recent work on 57efa1fe5957 ("mm/gup: prevent
gup_fast from racing with COW during fork", 2020-12-15) which is safer and
easier to understand, we're safe now within the whole copy_page_range()
against gup-fast, we don't need the wr-protect trick that proposed in
70e806e4e645 anymore.
Link: https://lkml.kernel.org/r/20210217233547.93892-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Wei Zhang <wzam@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After is_cow_mapping() is exported in mm.h, replace some manual checks
elsewhere throughout the tree but start to use the new helper.
Link: https://lkml.kernel.org/r/20210217233547.93892-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Wei Zhang <wzam@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We've got quite a few places (pte, pmd, pud) that explicitly checked
against whether we should break the cow right now during fork(). It's
easier to provide a helper, especially before we work the same thing on
hugetlbfs.
Since we'll reference is_cow_mapping() in mm.h, move it there too.
Actually it suites mm.h more since internal.h is mm/ only, but mm.h is
exported to the whole kernel. With that we should expect another patch to
use is_cow_mapping() whenever we can across the kernel since we do use it
quite a lot but it's always done with raw code against VM_* flags.
Link: https://lkml.kernel.org/r/20210217233547.93892-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Wei Zhang <wzam@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All the regions maintained in hugetlb reserved map is inclusive on "from"
but exclusive on "to". We can break earlier even if rg->from==t because
it already means no possible intersection.
This does not need a Fixes in all cases because when it happens
(rg->from==t) we'll not break out of the loop while we should, however the
next thing we'd do is still add the last file_region we'd need and quit
the loop in the next round. So this change is not a bugfix (since the old
code should still run okay iiuc), but we'd better still touch it up to
make it logically sane.
Link: https://lkml.kernel.org/r/20210217233547.93892-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Wei Zhang <wzam@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/hugetlb: Early cow on fork, and a few cleanups", v5.
As reported by Gal [1], we still miss the code clip to handle early cow
for hugetlb case, which is true. Again, it still feels odd to fork()
after using a few huge pages, especially if they're privately mapped to
me.. However I do agree with Gal and Jason in that we should still have
that since that'll complete the early cow on fork effort at least, and
it'll still fix issues where buffers are not well under control and not
easy to apply MADV_DONTFORK.
The first two patches (1-2) are some cleanups I noticed when reading into
the hugetlb reserve map code. I think it's good to have but they're not
necessary for fixing the fork issue.
The last two patches (3-4) are the real fix.
I tested this with a fork() after some vfio-pci assignment, so I'm pretty
sure the page copy path could trigger well (page will be accounted right
after the fork()), but I didn't do data check since the card I assigned is
some random nic.
https://github.com/xzpeter/linux/tree/fork-cow-pin-huge
[1] https://lore.kernel.org/lkml/27564187-4a08-f187-5a84-3df50009f6ca@amazon.com/
Introduce hugetlb_resv_map_add() helper to add a new file_region rather
than duplication the similar code twice in add_reservation_in_range().
Link: https://lkml.kernel.org/r/20210217233547.93892-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20210217233547.93892-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Wei Zhang <wzam@amazon.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a new mm is created, its PASID should be cleared, i.e. the PASID is
initialized to its init state 0 on both ARM and X86.
This patch was part of the series introducing mm->pasid, but got lost
along the way [1]. It still makes sense to have it, because each address
space has a different PASID. And the IOMMU code in
iommu_sva_alloc_pasid() expects the pasid field of a new mm struct to be
cleared.
[1] https://lore.kernel.org/linux-iommu/YDgh53AcQHT+T3L0@otcwcpicx3.sc.intel.com/
Link: https://lkml.kernel.org/r/20210302103837.2562625-1-jean-philippe@linaro.org
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
layout
There could be struct pages that are not backed by actual physical memory.
This can happen when the actual memory bank is not a multiple of
SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem() function
that iterates through PFNs in holes in memblock.memory and if there is a
struct page corresponding to a PFN, the fields of this page are set to
default values and it is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
Before commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock
regions rather that check each PFN") the holes inside a zone were
re-initialized during memmap_init() and got their zone/node links right.
However, after that commit nothing updates the struct pages representing
such holes.
On a system that has firmware reserved holes in a zone above ZONE_DMA, for
instance in a configuration below:
# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM
unset zone link in struct page will trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
in set_pfnblock_flags_mask() when called with a struct page from a range
other than E820_TYPE_RAM because there are pages in the range of
ZONE_DMA32 but the unset zone link in struct page makes them appear as a
part of ZONE_DMA.
Interleave initialization of the unavailable pages with the normal
initialization of memory map, so that zone and node information will be
properly set on struct pages that are not backed by the actual memory.
With this change the pages for holes inside a zone will get proper
zone/node links and the pages that are not spanned by any node will get
links to the adjacent zone/node. The holes between nodes will be
prepended to the zone/node above the hole and the trailing pages in the
last section that will be appended to the zone/node below.
[akpm@linux-foundation.org: don't initialize static to zero, use %llu for u64]
Link: https://lkml.kernel.org/r/20210225224351.7356-2-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Łukasz Majczak <lma@semihalf.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Sarvela, Tomi P" <tomi.p.sarvela@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I read the commit log of the following two:
- bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML")
- 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390")
Both are talking about HAS_IOMEM dependency missing in many drivers.
So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me.
This does not change the behavior of UML. UML still cannot enable
COMPILE_TEST because it does not provide HAS_IOMEM.
The current dependency for S390 is too strong. Under the condition of
CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST.
I also removed the meaningless 'default n'.
Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KP Singh <kpsingh@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With clang-13, some functions only get partially inlined, with a
specialized version referring to a global variable. This triggers a
harmless build-time check for the intel-rng driver:
WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init()
The function stop_machine() references
the function __init intel_rng_hw_init().
This is often because stop_machine lacks a __init
annotation or the annotation of intel_rng_hw_init is wrong.
In this instance, an easy workaround is to force the stop_machine()
function to be inline, along with related interfaces that did not show the
same behavior at the moment, but theoretically could.
The combination of the two patches listed below triggers the behavior in
clang-13, but individually these commits are correct.
Link: https://lkml.kernel.org/r/20210225130153.1956990-1-arnd@kernel.org
Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()")
Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The inlining logic in clang-13 is rewritten to often not inline some
functions that were inlined by all earlier compilers.
In case of the memblock interfaces, this exposed a harmless bug of a
missing __init annotation:
WARNING: modpost: vmlinux.o(.text+0x507c0a): Section mismatch in reference from the function memblock_bottom_up() to the variable .meminit.data:memblock
The function memblock_bottom_up() references
the variable __meminitdata memblock.
This is often because memblock_bottom_up lacks a __meminitdata
annotation or the annotation of memblock is wrong.
Interestingly, these annotations were present originally, but got removed
with the explanation that the __init annotation prevents the function from
getting inlined. I checked this again and found that while this is the
case with clang, gcc (version 7 through 10, did not test others) does
inline the functions regardless.
As the previous change was apparently intended to help the clang builds,
reverting it to help the newer clang versions seems appropriate as well.
gcc builds don't seem to care either way.
Link: https://lkml.kernel.org/r/20210225133808.2188581-1-arnd@kernel.org
Fixes: 5bdba520c1b3 ("mm: memblock: drop __init from memblock functions to make it inline")
Reference: 2cfb3665e864 ("include/linux/memblock.h: add __init to memblock_set_bottom_up()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Aslan Bakirov <aslan@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fixes issue with priority of operator. Operator "|" priority is
higher then "? :".
To improve the readability the operator "? :" has been replaced with
"if ()" statement.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
|
|
With the freezer using the proper signaling to notify us of when it's
time to freeze a thread, we can re-enable normal freezer usage for the
IO threads. Ensure that SQPOLL, io-wq, and the io-wq manager call
try_to_freeze() appropriately, and remove the default setting of
PF_NOFREEZE from create_io_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't send fake signals to PF_IO_WORKER threads, they don't accept
signals. Just treat them like kthreads in this regard, all they need
is a wakeup as no forced kernel/user transition is needed.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ld-version.sh checks the output from $(LD) --version, but it has a
problem on some locales.
For example, in Italian:
$ LC_MESSAGES=it_IT.UTF-8 ld --version | head -n 1
ld di GNU (GNU Binutils for Debian) 2.35.2
This makes ld-version.sh fail because it expects "GNU ld" for the
BFD linker case.
Add LC_ALL=C to override the user's locale.
BTW, setting LC_MESSAGES=C (or LANG=C) is not enough because it is
ineffective if LC_ALL is set on the user's environment.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212105
Reported-by: Marco Scardovi
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Recensito-da: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-03-12
This series contains updates to ice, i40e, ixgbe and igb drivers.
Magnus adjusts the return value for xsk allocation for ice. This fixes
reporting of napi work done and matches the behavior of other Intel NIC
drivers for xsk allocations.
Maciej moves storing of the rx_offset value to after the build_skb flag
is set as this flag affects the offset value for ice, i40e, and ixgbe.
Li RongQing resolves an issue where an Rx buffer can be reused
prematurely with XDP redirect for igb.
====================
|
|
Tom wrote most of the driver code and his experience is valuable to us.
Add him as a Reviewer so that patches will be Cc'ed and reviewed by him.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The join self tests previously used the '-c' command line option to
enable creation of pcap files for the tests that run, but the change to
allow running a subset of the join tests made overlapping use of that
option.
Restore the capture functionality with '-c' and move the syncookie test
option to '-k'.
Fixes: 1002b89f23ea ("selftests: mptcp: add command line arguments for mptcp_join.sh")
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sergey Shtylyov says:
====================
sh_eth: Improve the register/bit definitions in the Ether driver
Here are 4 patches against DaveM's 'net-next' repo. Mainly I'm renaming the register *enum*
tags/entries to match the SoC manuals,and also moving the RX-TX descriptor *enum*s closer to
the corresponding *struct*s...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Place the RX/TX descriptor bit *enum*s where they belong -- after the
corresponding RX/TX descriptor *struct*s and, while at it, switch to
declaring one *enum* entry per line...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finally, rename the rest of the *enum* tags still not (exactly) matching
the abbreviated register names from the manuals...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In all the SoC manuals (except R-Car gen2) the PHY status register's name
is abbreviated to PSR with the only valid bit 0 named LMON. Follow the
suit and rename the corresponding *enum* tag/entry.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In all the SoC manuals the TRSCER register bits match the corresponding
EESR registers's bits, but only on the R-Car gen2 SoC those are named
RINT<n> and TINT<n>. Follow the suit and rename the *enum* tag/entries
from DESC_I_* to TRSCER_*.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mat Martineau says:
====================
mptcp: Include multiple address ids in RM_ADDR
Here's a patch series from the MPTCP tree that extends the capabilities
of the MPTCP RM_ADDR header.
MPTCP peers can exchange information about their IP addresses that are
available for additional MPTCP subflows. IP addresses are advertised
with an ADD_ADDR header type, and those advertisements are revoked with
the RM_ADDR header type. RFC 8684 allows the RM_ADDR header to include
more than one address ID, so multiple advertisements can be revoked in a
single header. Previous kernel versions have only used RM_ADDR with a
single address ID, so multiple removals required multiple packets.
Patches 1-4 plumb address id list structures around the MPTCP code,
where before only a single address ID was passed.
Patches 5-8 make use of the address lists at the path manager layer that
tracks available addresses for both peers.
Patches 9-11 update the selftests to cover the new use of RM_ADDR with
multiple address IDs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the testcases for removing a list of addresses. Used
the netlink to flush the addresses in the testcases.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The removing testcases can only delete the addresses from id 1, this
patch added the support for deleting the addresses from any id that user
set.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the removing testcases used two zeros as arguments for chk_rm_nr
like this: chk_rm_nr 0 0. This doesn't mean that no RM_ADDR has been sent.
It only means that RM_ADDR had been sent in the opposite direction that
chk_rm_nr is checking.
This patch added a new argument invert for chk_rm_nr to allow it can
check the RM_ADDR from the opposite direction.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch invoked mptcp_nl_remove_addrs_list to remove a list of addresses
when the netlink flushes addresses, instead of using
mptcp_nl_remove_subflow_and_signal_addr to remove them one by one.
And dropped the unused parameter net in __flush_addrs too.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch implemented the function to remove a list of addresses and
subflows, named mptcp_nl_remove_addrs_list, which had a input parameter
rm_list as the removing addresses list.
In mptcp_nl_remove_addrs_list, traverse all the existing msk sockets to
invoke mptcp_pm_remove_addrs_and_subflows to remove a list of addresses
for each msk socket.
In mptcp_pm_remove_addrs_and_subflows, traverse all the addresses in the
removing addresses list, to find whether this address is in the conn_list
or anno_list. If it is, put the address ID into the removing address list
or the removing subflow list, and pass the two lists to
mptcp_pm_remove_addr and mptcp_pm_remove_subflow.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch dealt with removing multi subflows in PM:
In mptcp_pm_remove_subflow, changed the input parameter local_id as an
list of removing address ids, and passed the list to
mptcp_pm_nl_rm_subflow_received.
In mptcp_pm_nl_rm_subflow_received, iterated each address id from the
received ids list. Then shut down and closed each address id's subsocket.
In mptcp_nl_remove_subflow_and_signal_addr, put the single address id into
an ids list, and passed it to mptcp_pm_remove_subflow.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch dropped the member rm_id of struct mptcp_pm_data. Use
rm_list_rx in mptcp_pm_nl_rm_addr_received instead of using rm_id.
In mptcp_pm_nl_rm_addr_received, iterated each address id from
pm.rm_list_rx, then shut down and closed each address id's subsocket.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a new member rm_list_rx for struct mptcp_pm_data as an
list of the removing address ids on the incoming direction. Initialized
its nr field to zero in mptcp_pm_data_init.
In mptcp_pm_rm_addr_received, set it as the input rm_list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changed the member rm_id in struct mptcp_options_received as a
list of the removing address ids, and renamed it to rm_list.
In mptcp_parse_option, parsed the RM_ADDR suboption and filled them into
the rm_list in struct mptcp_options_received.
In mptcp_incoming_options, passed this rm_list to the function
mptcp_pm_rm_addr_received.
It also changed the parameter type of mptcp_pm_rm_addr_received.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a new member rm_list_tx for struct mptcp_pm_data as the
removing address list on the outgoing direction. Initialize its nr field
to zero in mptcp_pm_data_init.
In mptcp_pm_remove_anno_addr, put the single address id into an removing
list, and passed it to mptcp_pm_remove_addr.
In mptcp_pm_remove_addr, save the input rm_list to rm_list_tx in struct
mptcp_pm_data.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch defined a new struct mptcp_rm_list, the ids field was an
array of the removing address ids, the nr field was the valid number of
removing address ids in the array. The array size was definced as a new
macro MPTCP_RM_IDS_MAX. Changed the member rm_id of struct
mptcp_out_options to rm_list.
In mptcp_established_options_rm_addr, invoked mptcp_pm_rm_addr_signal to
get the rm_list. According the number of addresses in it, calculated
the padded RM_ADDR suboption length. And saved the ids array in struct
mptcp_out_options's rm_list member.
In mptcp_write_options, iterated each address id from struct
mptcp_out_options's rm_list member, set the invalid ones as TCPOPT_NOP,
then filled them into the RM_ADDR suboption.
Changed TCPOLEN_MPTCP_RM_ADDR_BASE from 4 to 3.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Petr Machata says:
====================
net: Resilient NH groups: netdevsim, selftests
Support for resilient next-hop groups was added in a previous patch set.
Resilient next hop groups add a layer of indirection between the SKB hash
and the next hop. Thus the hash is used to reference a hash table bucket,
which is then used to reference a particular next hop. This allows the
system more flexibility when assigning SKB hash space to next hops.
Previously, each next hop had to be assigned a continuous range of SKB hash
space. With a hash table as an intermediate layer, it is possible to
reassign next hops with a hash table bucket granularity. In turn, this
mends issues with traffic flow redirection resulting from next hop removal
or adjustments in next-hop weights.
This patch set introduces mock offloading of resilient next hop groups by
the netdevsim driver, and a suite of selftests.
- Patch #1 adds a netdevsim-specific lock to protect next-hop hashtable.
Previously, netdevsim relied on RTNL to maintain mutual exclusion.
Patch #2 extracts a helper to make the following patches clearer.
- Patch #3 implements the support for offloading of resilient next-hop
groups.
- Patch #4 introduces a new debugfs interface to set activity on a selected
next-hop bucket. This simulates how HW can periodically report bucket
activity, and buckets thus marked are expected to be exempt from
migration to new next hops when the group changes.
- Patches #5 and #6 clean up the fib_nexthop selftests.
- Patches #7, #8 and #9 add tests for resilient next hop groups. Patch #7
adds resilient-hashing counterparts to fib_nexthops.sh. Patch #8 adds a
new traffic test for resilient next-hop groups. Patch #9 adds a new
traffic test for tunneling.
- Patch #10 actually leverages the netdevsim offload to implement a suite
of algorithmic tests that verify how and when buckets are migrated under
various simulated workload scenarios.
The overall plan is to contribute approximately the following patchsets:
1) Nexthop policy refactoring (already pushed)
2) Preparations for resilient next hop groups (already pushed)
3) Implementation of resilient next hop group (already pushed)
4) Netdevsim offload plus a suite of selftests (this patchset)
5) Preparations for mlxsw offload of resilient next-hop groups
6) mlxsw offload including selftests
Interested parties can look at the complete code at [2].
[1] https://tools.ietf.org/html/rfc2992
[2] https://github.com/idosch/linux/commits/submit/res_integ_v1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test various aspects of the resilient nexthop group offload API on top
of the netdevsim implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a resilient nexthop objects version of gre_multipath_nh.sh. Test
that both IPv4 and IPv6 overlays work with resilient nexthop groups
where the nexthops are two GRE tunnels.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verify that IPv4 and IPv6 multipath forwarding works correctly with
resilient nexthop groups and with different weights.
Test that when the idle timer is not zero, the resilient groups are not
rebalanced - because the nexthop buckets are considered active - and the
initial weights (1:1) are used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
