| Age | Commit message (Collapse) | Author |
|---|
|
Commit "shmem: fix quota lock nesting in huge hole handling" was not so
good: Smatch caught shmem_recalc_inode()'s shmem_inode_unacct_blocks()
descending into quota_send_warning(): where blocking GFP_NOFS is used,
yet shmem_recalc_inode() is called holding the shmem inode's info->lock.
Yes, both __dquot_alloc_space() and __dquot_free_space() are commented
"This operation can block, but only after everything is updated" - when
calling flush_warnings() at the end - both its print_warning() and its
quota_send_warning() may block.
Rework shmem_recalc_inode() to take the shmem inode's info->lock inside,
and drop it before calling shmem_inode_unacct_blocks().
And why were the spin_locks disabling interrupts? That was just a relic
from when shmem_charge() and shmem_uncharge() were called while holding
i_pages xa_lock: stop disabling interrupts for info->lock now.
To help stop me from making the same mistake again, add a might_sleep()
into shmem_inode_acct_block() and shmem_inode_unacct_blocks(); and those
functions have grown, so let the compiler decide whether to inline them.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-fsdevel/ffd7ca34-7f2a-44ee-b05d-b54d920ce076@moroto.mountain/
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <29f48045-2cb5-7db-ecf1-72462f1bef5@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since offset_iterate_dir() does not walk the parent's d_subdir list
nor does it manipulate the parent's d_child, there doesn't seem to
be a reason to hold the parent's d_lock. The offset_ctx's xarray can
be sufficiently protected with just the RCU read lock.
Flame graph data captured during the git regression run shows a
20% reduction in CPU cycles consumed in offset_find_next().
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202307171640.e299f8d5-oliver.sang@intel.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <169030957098.157536.9938425508695693348.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Tie the dynamically-allocated xarray locks into a single class so
contention on the directory offset xarrays can be observed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <169020933088.160441.9405180953116076087.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current cursor-based directory offset mechanism doesn't work
when a tmpfs filesystem is exported via NFS. This is because NFS
clients do not open directories. Each server-side READDIR operation
has to open the directory, read it, then close it. The cursor state
for that directory, being associated strictly with the opened
struct file, is thus discarded after each NFS READDIR operation.
Directory offsets are cached not only by NFS clients, but also by
user space libraries on those clients. Essentially there is no way
to invalidate those caches when directory offsets have changed on
an NFS server after the offset-to-dentry mapping changes. Thus the
whole application stack depends on unchanging directory offsets.
The solution we've come up with is to make the directory offset for
each file in a tmpfs filesystem stable for the life of the directory
entry it represents.
shmem_readdir() and shmem_dir_llseek() now use an xarray to map each
directory offset (an loff_t integer) to the memory address of a
struct dentry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <168814734331.530310.3911190551060453102.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
De-duplicate the error handling paths. No change in behavior is
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <168814733654.530310.9958360833543413152.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Create a vector of directory operations in fs/libfs.c that handles
directory seeks and readdir via stable offsets instead of the
current cursor-based mechanism.
For the moment these are unused.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Message-Id: <168814732984.530310.11190772066786107220.stgit@manet.1015granger.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
i_pages lock nests inside i_lock, but shmem_charge() and shmem_uncharge()
were being called from THP splitting or collapsing while i_pages lock was
held, and now go on to call dquot_alloc_block_nodirty() which takes
i_lock to update i_blocks.
We may well want to take i_lock out of this path later, in the non-quota
case even if it's left in the quota case (or perhaps use i_lock instead
of shmem's info->lock throughout); but don't get into that at this time.
Move the shmem_charge() and shmem_uncharge() calls out from under i_pages
lock, accounting the full batch of holes in a single call.
Still pass the pages argument to shmem_uncharge(), but it happens now to
be unused: shmem_recalc_inode() is designed to account for clean pages
freed behind shmem's back, so it gets the accounting right by itself;
then the later call to shmem_inode_unacct_blocks() led to imbalance
(that WARN_ON(inode->i_blocks) in shmem_evict_inode()).
Reported-by: syzbot+38ca19393fb3344f57e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/0000000000008e62f40600bfe080@google.com/
Reported-by: syzbot+440ff8cca06ee7a1d4db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/00000000000076a7840600bfb6e8@google.com/
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <20230725144510.253763-8-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow system administrator to set default global quota limits at tmpfs
mount time.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-7-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now the basic infra-structure is in place, enable quota support for tmpfs.
This offers user and group quotas to tmpfs (project quotas will be added
later). Also, as other filesystems, the tmpfs quota is not supported
within user namespaces yet, so idmapping is not translated.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-6-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add new shmem quota format, its quota_format_ops together with
dquot_operations
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-5-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and ->quota_write callbacks
Currently we check whether superblock has ->quota_read and ->quota_write
operations to check whether filesystem supports quotas. However for
example for shmfs we will not read or write dquots so check whether
quota operations are set in the superblock instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Message-Id: <20230725144510.253763-4-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make shmem_get_inode() return ERR_PTR instead of NULL on error. This will be
useful later when we introduce quota support.
There should be no functional change.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-3-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make shmem_inode_acct_block() return proper error code instead of bool.
This will be useful later when we introduce quota support.
There should be no functional change.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230725144510.253763-2-cem@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to drop the "now" argument from the
update_time operation. Have btrfs_update_time use the new
inode_update_timestamps helper to fetch a new timestamp and update it
properly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-4-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In future patches we're going to change how the ctime is updated
to keep track of when it has been queried. The way that the update_time
operation works (and a lot of its callers) make this difficult, since
they grab a timestamp early and then pass it down to eventually be
copied into the inode.
All of the existing update_time callers pass in the result of
current_time() in some fashion. Drop the "time" parameter from
generic_update_time, and rework it to fetch its own timestamp.
This change means that an update_time could fetch a different timestamp
than was seen in inode_needs_update_time. update_time is only ever
called with one of two flag combinations: Either S_ATIME is set, or
S_MTIME|S_CTIME|S_VERSION are set.
With this change we now treat the flags argument as an indicator that
some value needed to be updated when last checked, rather than an
indication to update specific timestamps.
Rework the logic for updating the timestamps and put it in a new
inode_update_timestamps helper that other update_time routines can use.
S_ATIME is as treated as we always have, but if any of the other three
are set, then we attempt to update all three.
Also, some callers of generic_update_time need to know what timestamps
were actually updated. Change it to return an S_* flag mask to indicate
that and rework the callers to expect it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-3-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
An inode with no superblock? Unpossible!
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-1-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230807112625.652089-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All ocfs2 journal error handling and logging is based on buffer_heads,
and the owning inode and thus super_block can be retrieved through
bh->b_assoc_map->host. Switch to using that to remove the last users
of bdev->bd_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Message-Id: <20230807112625.652089-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__ext4_journal_get_write_access already has a super_block available,
and there is no need to go from that to the bdev to go back to the
owning super_block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is a somewhat awkward backpointer from a block device to
an owning file system with unclear rules.
For the buffer_head code we already have a good backpointer for the
inode that the buffer_head is associated with, even if it lives on the
block device mapping: b_assoc_map. It is used track dirty buffers
associated with an inode but living on the block device mapping like
directory buffers in ext4.
mark_buffer_write_io_error already uses it for the call to
mapping_set_error, and should be doing the same for the per-sb error
sequence.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
d_genocide is only used by built-in code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230808161704.1099680-1-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add fdir_fltr_lock locking in unprotected places.
The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which
iterates over all filters and looks for a duplicate. The filter can be
removed from list and freed from memory at the same time it's being
compared. All other places where filters are deleted are already
protected with spinlock.
The remaining changes protect adapter->fdir_active_fltr variable so now
all its uses are under a spinlock.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807205011.3129224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-07
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Add capability check for vnic counters
net/mlx5: Reload auxiliary devices in pci error handlers
net/mlx5: Skip clock update work when device is in error state
net/mlx5: LAG, Check correct bucket when modifying LAG
net/mlx5e: Unoffload post act rule when handling FIB events
net/mlx5: Fix devlink controller number for ECVF
net/mlx5: Allow 0 for total host VFs
net/mlx5: Return correct EC_VF function ID
net/mlx5: DR, Fix wrong allocation of modify hdr pattern
net/mlx5e: TC, Fix internal port memory leak
net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
====================
Link: https://lore.kernel.org/r/20230807212607.50883-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
v1: https://lore.kernel.org/all/20230728075840.4022760-2-shaojijie@huawei.com/
====================
Link: https://lore.kernel.org/r/20230807113452.474224-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093] __switch_to+0x7c/0xbc
[ 3147.261183] __schedule+0x338/0x6f0
[ 3147.265357] schedule+0x50/0xe0
[ 3147.269185] schedule_preempt_disabled+0x18/0x24
[ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880] __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839] mutex_lock+0x50/0x60
[ 3147.288841] rtnl_lock+0x20/0x2c
[ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718] hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109] process_one_work+0x1d0/0x490
[ 3147.319805] worker_thread+0x158/0x3d0
[ 3147.324240] kthread+0x108/0x13c
[ 3147.328154] ret_from_fork+0x10/0x18
In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().
This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().
Fixes: 04b6ba143521 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some configure flow of hns3 driver, for example, change mtu, it will
disable MAC through firmware before configuration. But firmware disables
MAC asynchronously. The rx traffic may be not stopped in this case.
So fixes it by waiting until mac link is down.
Fixes: a9775bb64aa7 ("net: hns3: fix set and get link ksettings issue")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some nic configurations could only be performed after link is down. So this
patch refactor this API for reuse.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore the mac pause state to user configuration when autoneg is disabled
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the new (unreleased) SO_PEERPIDFD sockopt to return ENODATA
rather than ESRCH if a socket type does not support remote peer-PID
queries.
Currently, SO_PEERPIDFD returns ESRCH when the socket in question is
not an AF_UNIX socket. This is quite unexpected, given that one would
assume ESRCH means the peer process already exited and thus cannot be
found. However, in that case the sockopt actually returns EINVAL (via
pidfd_prepare()). This is rather inconsistent with other syscalls, which
usually return ESRCH if a given PID refers to a non-existant process.
This changes SO_PEERPIDFD to return ENODATA instead. This is also what
SO_PEERGROUPS returns, and thus keeps a consistent behavior across
sockopts.
Note that this code is returned in 2 cases: First, if the socket type is
not AF_UNIX, and secondly if the socket was not yet connected. In both
cases ENODATA seems suitable.
Signed-off-by: David Rheinsberg <david@readahead.eu>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Fixes: 7b26952a91cf ("net: core: add getsockopt SO_PEERPIDFD")
Link: https://lore.kernel.org/r/20230807081225.816199-1-david@readahead.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instance in ARCH=riscv builds:
arch/riscv/mm/init.c:276:7: warning: no previous extern declaration
for non-static variable 'trampoline_pg_dir'
[-Wmissing-variable-declarations]
276 | pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
| ^
arch/riscv/mm/init.c:276:1: note: declare 'static' if the variable is
not intended to be used outside of this translation unit
276 | pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
| ^
arch/riscv/mm/init.c:279:7: warning: no previous extern declaration
for non-static variable 'early_pg_dir'
[-Wmissing-variable-declarations]
279 | pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
| ^
arch/riscv/mm/init.c:279:1: note: declare 'static' if the variable is
not intended to be used outside of this translation unit
279 | pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
| ^
These symbols are referenced by more than one translation unit, so make
sure they're both declared and include the correct header for their
declarations. Finally, sort the list of includes to help keep them tidy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081000.tTL1ElTr-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230808-riscv_static-v2-1-2a1e2d2c7a4f@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Section 2.1 of the Platform Specification [1] states:
Unless otherwise specified by a given I/O device, I/O devices are on
ordering channel 0 (i.e., they are point-to-point strongly ordered).
which is not sufficient to guarantee that a readX() by a hart completes
before a subsequent delay() on the same hart (cf. memory-barriers.txt,
"Kernel I/O barrier effects").
Set the I(nput) bit in __io_ar() to restore the ordering, align inline
comments.
[1] https://github.com/riscv/riscv-platform-specs
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20230803042738.5937-1-parri.andrea@gmail.com
Fixes: fab957c11efe ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
commit 914d6f44fc50 ("RISC-V: only iterate over possible CPUs in ISA
string parser") changed riscv_fill_hwcap() from iterating over CPU DT
nodes to iterating over logical CPU IDs. Since this function runs long
before cpu_dev_init() creates CPU devices, it hits the fallback path in
of_cpu_device_node_get(), which itself iterates over the DT nodes,
searching for a node with the requested CPU ID. (Incidentally, this
makes riscv_fill_hwcap() now take quadratic time.)
riscv_fill_hwcap() passes a logical CPU ID to of_cpu_device_node_get(),
which uses the arch_match_cpu_phys_id() hook to translate the logical ID
to a physical ID as found in the DT.
arch_match_cpu_phys_id() has a generic weak definition, and RISC-V
provides a strong definition using cpuid_to_hartid_map(). However, the
RISC-V specific implementation is located in arch/riscv/kernel/smp.c,
and that file is only compiled when SMP is enabled.
As a result, when SMP is disabled, the generic definition is used, and
riscv_isa gets initialized based on the ISA string of hart 0, not the
boot hart. On FU740, this means has_fpu() returns false, and userspace
crashes when trying to use floating-point instructions.
Fix this by moving arch_match_cpu_phys_id() to a file which is always
compiled.
Fixes: 70114560b285 ("RISC-V: Add RISC-V specific arch_match_cpu_phys_id")
Fixes: 914d6f44fc50 ("RISC-V: only iterate over possible CPUs in ISA string parser")
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230803012608.3540081-1-samuel.holland@sifive.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Replace remaining open-coded struct_size_t() instance (Gustavo A. R.
Silva)
- Adjust vboxsf's trailing arrays to be proper flexible arrays
* tag 'hardening-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: venus: Use struct_size_t() helper in pkt_session_unset_buffers()
vboxsf: Use flexible arrays for trailing string member
|
|
This was introduced to add a plug based way of signaling nowait issues,
but we have since moved on from that. Kill the old dead code, nobody is
setting it anymore.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update MAINTAINERS entries with a valid email address as the Microchip
one is no longer valid.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BUILD_VDSO macro was incorrectly spelled as BULID_VDSO in
asm/linkage.h. This causes the !defined(BULID_VDSO) directive to always
evaluate to true.
Correct the spelling to BUILD_VDSO.
Fixes: bea75b33895f ("x86/Kconfig: Introduce function padding")
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230808182353.76218-1-jinghao@linux.ibm.com
|
|
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit
40613da52b13 in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
# qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \
-monitor stdio -serial file:serial.log \
-kernel arch/x86/boot/bzImage \
-append "root=/dev/sda1 console=ttyS0" \
guest_disk.img
Once guest OS is fully booted at qemu prompt:
(qemu) device_add e1000
(check serial.log) it will cause NULL pointer dereference at:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
BUG: kernel NULL pointer dereference, address: 0000000000000018
? pci_assign_unassigned_bridge_resources+0x1f/0x260
enable_slot+0x21f/0x3e0
acpiphp_hotplug_notify+0x13d/0x260
acpi_device_hotplug+0xbc/0x540
acpi_hotplug_work_fn+0x15/0x20
process_one_work+0x1f7/0x370
worker_thread+0x45/0x3b0
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b13.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The changes from commit 32832a407a71 ("io_uring: Fix io_uring mmap() by
using architecture-provided get_unmapped_area()") to the parisc
implementation of get_unmapped_area() broke glibc's locale-gen
executable when running on parisc.
This patch reverts those architecture-specific changes, and instead
adjusts in io_uring_mmu_get_unmapped_area() the pgoff offset which is
then given to parisc's get_unmapped_area() function. This is much
cleaner than the previous approach, and we still will get a coherent
addresss.
This patch has no effect on other architectures (SHM_COLOUR is only
defined on parisc), and the liburing testcase stil passes on parisc.
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Fixes: 32832a407a71 ("io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()")
Fixes: d808459b2e31 ("io_uring: Adjust mapping wrt architecture aliasing requirements")
Link: https://lore.kernel.org/r/ZNEyGV0jyI8kOOfz@p100
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Haoyue no longer maintains the Hisilicon RoCE driver. So remove him
from MAINTAINERS.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230807064228.4032536-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
close(2) is a special case which guarantees a shallow kernel stack,
making delegation to task_work machinery unnecessary. Said delegation is
problematic as it involves atomic ops and interrupt masking trips, none
of which are cheap on x86-64. Forcing close(2) to do it looks like an
oversight in the original work.
Moreover presence of CONFIG_RSEQ adds an additional overhead as fput()
-> task_work_add(..., TWA_RESUME) -> set_notify_resume() makes the
thread returning to userspace land in resume_user_mode_work(), where
rseq_handle_notify_resume takes a SMAP round-trip if rseq is enabled for
the thread (and it is by default with contemporary glibc).
Sample result when benchmarking open1_processes -t 1 from will-it-scale
(that's an open + close loop) + tmpfs on /tmp, running on the Sapphire
Rapid CPU (ops/s):
stock+RSEQ: 1329857
stock-RSEQ: 1421667 (+7%)
patched: 1523521 (+14.5% / +7%) (with / without rseq)
Patched result is the same regardless of rseq as the codepath is avoided.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Andi reported (see link below) a regression when printing the
'duration_time' tool event, where it gets printed as "not counted" for
most of the CPUs, fix it by skipping zero counts for tool events.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/ZMlrzcVrVi1lTDmn@tassilo/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Fix a freeze consistency check in gfs2_trans_add_meta()
- Don't use filemap_splice_read as it can cause deadlocks on gfs2
* tag 'gfs2-v6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Don't use filemap_splice_read
gfs2: Fix freeze consistency check in gfs2_trans_add_meta
|
|
Buffers mapped with pgprot_writecombined() are not correctly
flushed. This triggers issues on VPU access using random
memory content such as MMU translation faults, invalid context
descriptors being fetched and can lead to VPU FW crashes.
Fixes: 647371a6609d ("accel/ivpu: Add GEM buffer object management")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802063735.3005291-1-stanislaw.gruszka@linux.intel.com
|
|
A switch from OSI to PC mode is only possible if all CPUs other than the
calling one are OFF, either through a call to CPU_OFF or not yet booted.
Currently OSI mode is enabled before power domains are created. In cases
where CPUidle states are not using hierarchical CPU topology the bail out
path tries to switch back to PC mode which gets denied by firmware since
other CPUs are online at this point and creates inconsistent state as
firmware is in OSI mode and Linux in PC mode.
This change moves enabling OSI mode after power domains are created,
this would makes sure that hierarchical CPU topology is used before
switching firmware to OSI mode.
Cc: stable@vger.kernel.org
Fixes: 70c179b49870 ("cpuidle: psci: Allow PM domain to be initialized even if no OSI mode")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Genpd parent and child domain topology created using dt_idle_pd_init_topology()
needs to be removed during error cases.
Add new helper function dt_idle_pd_remove_topology() for same.
Cc: stable@vger.kernel.org
Reviewed-by: Ulf Hanssson <ulf.hansson@linaro.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To pick up the changes from these csets:
522b1d69219d8f08 ("x86/cpu/amd: Add a Zenbleed fix")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZND17H7BI4ariERn@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 46d21ec067490ab9cdcc89b9de5aae28786a8b8e.
The tests were made with a specific workload, further tests on a
recently updated fedora 38 system with a system wide perf.data file
shows 'perf report' taking excessive time resolving inlines in vmlinux,
so lets revert this until a full investigation and improvement on the
addr2line support code is made.
Reported-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZMl8VyhdwhClTM5g@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa6654c ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
